2,006 models
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
Boite de fusible Victron MegaFuse de rechange. Si vous utilisez mes Gcode ou 3mf, l'ordre des couleurs pour le couvercle est : Blanc => Noir => Bleu Victron MegaFuse spare box If you use my Gcode or 3mf, colour order for the cap is :…
A rugged parametric box for spare fuses for your car/motorcycle/caravan. It holds 19 fuses. You will need 3 М3х40 bolts and 6 M3 nuts for the hinges. Print settings: Print in PETG the box and the seal in FLEX material; 0.2 Structural…
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
This is a simple flashlight diffuser designed to be printed in opaque plastic. The OpenSCAD model can be easily edited to fit any size flashlight head. It looks nice with the bottom infill pattern set to concentric. I have included stl…
This is a simple easy to print Refuse bin for the Bambu Labs printers including the X1C X1 P1 P1P and P1S Printers When the Anti-vibration feet are installed “it can be used without them though it will stick up about .450” more than…
The heatbed LED is rather bright when looking from a side. This tiny piece inserts into the cutout over the led to difuse it. It's designed as a tight fit without need for glue. Mine is printed in White PLA Prusament and nicely difuses…
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Printed in transparent polymaker PETG, max 15mm/second print speed makes the diffuser clear but transparent enough. Prints without supports. I used a archimedean curve on the external face which looks pretty cool.
I broke the clasp of the engine compartment fusebox in my Peugeot Traveller. Thus I designed a new one. Should also fit Citroen Spacetourer, Toyota Proace Verso, Opel Zafira Life, Fiat Ulysse.
Storagebox for fuses, wallmounted. With: 132.5mm, Depth: 56mm, Height: 170mm Fits: 10A, 16A, 25A, 35A and 50A fuses. Needs supports to be printed.
Diffuser fitting a Ford Focus MK4 to install Aliexpress ambient lights.
This diffuser is upgrade for ‘Sapphire Pro - LED Strip Holder for WS2812b’ This upgrade is easy to print, I used Devil Design transparent PET-G filament, maybe it work great with white filament YOU SHOULD TRY!
I've made this LED track and diffuser for my printer enclosure (which I also designed, built out of wood, and could share the model for if some folks are interested) I've printed the rails, corners and front with opaque white PETG, and…
Instead of a hole as in the original part from Prusa this model has one layer of filament diffusing the light so it won't shine so aggressively. The result will vary depending on your filament color and transparency. Print with PETG 100%…
These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…
I made this to diffuse the light from my flip5. Its great as a very soft night light. Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 3 Infill…
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…
A not-quite-right-angle elbow to deflect the stream of sweet-smelling vapor coming out of my diffuser.
100x160mm sign, with art of a manager type person, reading "Do Not Confuse Me with Facts" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…
This is a redesigned version of my previous water diffuser. It's intended to prevent holes forming in the ground while watering, and it allows for higher water flow rates. The diffuser is designed to connect directly to a standard…
Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…
Seatbelt Insert for your cars seat belt buckle to prevent the alarm from going off. Often while using the vehicle in the yard or off-road at slow speeds, one needs to be able to move around freely in the driver seat to see around the…
This is a small and simple device that can be used to fuse filament together. You can finally take all those end of the spool pieces and samples of filament and combine them into enough of a roll to print something. There are two parts, a…
A stackable fuse holder for automotive blade fuses that uses nothing more than 3D printed parts, M3 screws, and regular spade connectors. I thought that most fuse holders were way too bulky when I did build a super compact USB charging…
– Edit 01/08/2024: Added 10 PrusaXL versions (300mm x 300mm, 11.8 inches) of the panels, they can be found over on their own model page here. Based on the panels featured in this Youtube Video by 3D Printer Academy and not being able to…
This diffuser prints upside-down and does not require supports due to the 45 degree slope and angled diffusion holes. Plenty of perforations on all sides to let the water out quickly while not disturbing the bottom of the aquarium. Feet…
Lost my BMW fuse removal tool inside fuse box so I desing 3D printable one from original one so it fits into fuse box holder. Works with normal size fuse, not mini. No supports needed, printed with PETG and layer height 0.2
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Matchstick Diffuser A diffuser for the Daylight/Rainbow on a Matchstick LEDs BOM Item Qty. M3 Heatset Insert 4 M3x6 BHCS 4 Printing Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a…
Description Inspired by the new Deadpool Wolverine movie, we made an awesome little figurine where we fused the two of them together! If you sign up on our Patreon , you can also access a painted 3mf version of Deadpool Wolverine for…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…
4010 Mount for Ender 3 v3 se
I couldn't find a model that would let me mount and hide my Disco-on-a-stick and Daylight-on-a-stick LED strips and hide the lights behind a tidy diffuser, so here it is. The provided Step files are designed for a Voron 2.4 350, but I've…
Universal locks to ensure safe electrical work on automatic fuses. Compliment your Lockout/Tagout supplies. 4 versions provided: Fuse lock for M3x20 screw and brass insert Fuse lock for M4x25 screw and brass insert Fuse lock with…
➡️ An add-on diffuser for the popular LED Strip Holder for Voron 2.4 here on Printables Sizes Only available for 300mm Voron v2.4 for now, since it's the only one I have to test fit. Please feel free to Remix it to fit more sizes. I'm…
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
Just a simple print that allows you to pour water into your tanks without disturbing the aquascape. Added a larger version for bigger tanks. Fits over a tank rim up to 28mm wide.
Ore block - 100% infill; tree supports; grey PLA Diffuser - 100% infill; white PLA Light Holder - 60% infill; any color PLA; fuzzy setting to help adhere light strip to surface Base - 40% infill; tree supports; black PLA Once all of the…
Cover insert for a switchboard when there is an opening after a removed circuit breaker. The model is attached so you can adjust it to your desired width. The insert is not too stiff not too flexible, so perfect to be placed in place and…
Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
This is a 3D model of a diffuser attachment designed for the Dyson Airwrap. Ideal for those looking to experiment with new accessories for their Airwrap, this model helps distribute air more evenly to enhance curling and drying…
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
My wife asked to design and print this thing for her, so I did. Printed with ABS to be heat resistant. Layer height - 0.2, infill - 5%, 2 walls. Add massive inside and outside brim. No supports needed. Print test ring first to test if it…
I came across a model designed by Mark Rhodes and initially thought I could easily replicate it myself. However, I soon discovered that creating effective acoustic diffusion involves more than randomly generating cubes and placing them on…
This is a single piece case to hold 40 mini or low profile mini car fuses and a printable fuse puller. I printed in PETG on a MK3S+ using PrusaSlicer's 0.2mm settings.
I've printed this to use inline with my heated bed inorder to add an extra bit of protection for my custom printer. Print both parts add the crimped spade connectors and glue together with acetone. I've used 16AWG silicone wire inorder to…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
After upgrading my Layer Fans to 5015's, the stock 2010 Diffuser Fan looked comically tiny. This mount directs the airflow of a 4020 Fan to the Diffuser. Note: The Fan just slips-in… No screws. If tolerances make for a loose fit, a dab of…
Elevate your bead crafting with this duo for standard-sized beads! Showcase Bead Buddy Aligner: Quickly aligns beads with a simple 5 second shake. Saves time during bead prep. Tweezers: Enables precise placement of single beads on your…
When I bought my first car, it didn't come with a fuse extractor, so I modeled this one from a standard Skoda fuse extractor. Printed with 0.3mm nozzle and 0.15mm layer height, but you can go even lower if you wish. The print may not be…
for full size automotive fuse
Instead of a lost or broken stock one. It fits perfectly, the dimensions are correct, you need to take the factory rubber from your old cover or cut/buy a new one. Don't forget that 3D printing is not very airtight, use methods from the…
hii i design a car universal diffuser... Category: Automotive
Meet Scyphozoa belonging to the kingdom Animalia and phylum Cnidaria and give him a warm welcome in your Christmas decorations. A completely different Christmas decoration this year! Simply slide it over an existing LED of the Christmas…
This is a quick remix of Bambu Lab's Lithophane frame. The only changes made were: Remove the ‘Bambu Lab’ logo from the top of the frame Added locks for the diffuser plate so it doesn't slip out I've included a 3mf file. Supports are…
Printed from PETG with 3perimeters and works fine :)
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Is your 2150 fan dying and needs replaced? Is the cooling system for the hot end “inadequate” for you? Well, here's you're solution. It's designed around my other fan shroud , but made for this use case. I went through one prototype that…
I took the Voron enclosure part and made it longer so I could use it on other projects.
Safety first, so if you are making any project with high current lead-acid battery you need to fuse it. This design is allow to use holder many times and not afraid about wire/terminal damage. distance beetwen mounting holes - 27mm. Bill…
Remix of an awesome idea from Subtle3D. I've taken the same model and designed end caps, a right angle, as well as a few different lengths to fit in different configurations. STEP and Fusion files available for easy customizations. The…
Simply clip them on the effector, it will withstand accelerations without any glue or screws or wathever. I used gyroïd infill @10% without testing any other pattern or density. Filament is PLA White Matte from Grossiste3D, it gives a…
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
Splitter Diffuser Tunnel for Race Cars splitters etc. Quite large, you may want to scale it down depending on your application. Print Settings Rafts:No Supports:No Resolution:0.2 Infill:100%
Simple yet very effective diffuser system for LED strip lights. Base can be nailed or double sided taped, diffuser covers snap into place. All parts can be cut to proper length in your slicer for a perfectly custom fit every time. I…
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
This is a 3D model of the IEC320 C14 Power Socket that comes with a Fuse Holder and a Switch for IEC C13 Power Cable connection. It's designed in Fusion 360, .f3d files are included. I tried to make the dimensions as close to real one as…
This is a twisted air diffuser for a 120mm PC case fan. The air vent exits at a 45 degree angle. No support needed. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
Aquarium water change diffuser, Simple to use just put it on the side of your Aquarium and enjoy clear water!
32x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version *…
Hi everybody, only a "multi remix" of fuse holder stackable with the possibility to mount it in a panel, I liked the original projects https://www.thingiverse.com/thing:1787609 and the remix htps://www.thingiverse.com/thing:1927820, I…
The fuse puller that came with my car (Astra J) broke the first time I used it so I re-created it in fusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament:…
Visco fuse machine, not perfect but works well. I use a screwdriver to start the machine. I added the fusion 360 file if anyone wants to improve / change things.
Clock diffusor for led Rings
ANL Fuse holder to match my 364396-buss-bar. I used ¼ X 20 stainless bolts I printed in PLA with 20% infill
A self designed terminal block for your solar installation. It was designed to fit a mega fuse as well. It also can be used as a single terminal without fuse. The cover prevents accidantial discharges. All you need is 2 M8x25 plus 4 M8…
You can buy these from me here! Consider donating to us if you like this model! This diffuser lamp shade allows you to easily use your flashlight to brighten up your office or bedroom. Currently available for the Emisar D4V2, D4K, D18,…
LED lights built in to the Ender 3 S1 Pro (and add-on for the regular S1) were making hot spots on the bed when shooting time-laspe and so need a bigger diffuser to soften the light. Print Settings Printer Brand: Creality Printer: Ender 3…
2024-06-01 : updated version with higher brim! !!! SCALING FOR HOSE DIAMETERS OTHER THAN 15mm NEEDED !!! use this formula: 100% scaling divided by 15mm. multiplicate the result by the outer diameter of your hose in milimeters. example:…
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
A light diffuser/holder for string or strip LEDs in the Lack Enclosure Print instructions Printing 2 per side will fit in between the enclosure legs. Model is pre-positioned. You will need 2 small wood screws per diffuser. Use 3…
Jealous of the diffused-looking light from the new Apex Neptune Sky? I am. Want to get that T5/halide look from your AI Prime? I do. I made this light hood for AI Prime HD to get rid of most of the “disco ball” effect that is common in…
Update: Adding a NEW V3 VERSION with a full length that runs along the entire bottom edge of the xLCD cover and guides the light perfectly along its entire length. Adding a NEW V2 VERSION that is shape improved and the diffusion part is…
Same instructions as original by @Ulysse98: Make sure to print the case part with the front lip against the bed, and the tray on its only flat side (lip facing up). The case part slides on the Audio interface from the front and should…
This is ventilation air-intake adjustable grill, with uniform air difuser at ceiling level. It is built for pipes with exterior dimension of (usually) 125mm and interior of 117mm. Screw is 5cm height. Part 2 needs to be 3D-printed with…
You can buy these diffusers from me here! If you like our models, consider giving us a 1 time donation! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize…
Users of the kinda cheap-ish Eastwood powder coating system know about the problem around uneven air distribution in the powder container. You often get clumps of powder out of the nozzle or no powder at all until you shake the bottle…
Mini size fuse tool for vehicle (car) fuses. Print on side, no support needed. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2x0.4 Filament: any PLA Category: Hand Tools
The original file isn't in the list provided so I decided to remix it to make it
I have designed this fuse holder to take MIDI sized fuses. I print these in 100% infill, 3 walls, 0.4mm nozzle, works great in eSun ABS+ filament Parts needed to complete the build are as follows; (all parts can be either BZP or stainless…
