MG995 Standard Servo Arm/Horn
Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo
- Downloads
- 3,054
- Likes
- 122
- Rating
- 4.5
714 models
Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
1x1 keycap for Logitech G915 TKL with Bitcoin logo. I used supports to the bed, using needle nose pliers made removing them simple. Careful not to grab the nibs. --- If you feel like tipping me, send a bitcoin lightning payment to…
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…
Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…
These buttons, or more accurately button adapters or extenders, can easily fall off during transportation or if dropped (so I've discovered). Rather than buy a new mouse or mouse adapters I grabbed some calipers and got to work in…
Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…
A tightening/loosening grip, for when the integrated clamp is tightened to much or to little on the Logitech G29/G920.
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…
Have you ever experienced the frustration of a loose socket ring on your light fixture? I certainly have. After encountering this issue in my bathroom, I decided it was time to take matters into my own hands. The Challenge: My light…
A cooler case for the GMKTec G9 If you. like me were in the market for a cheap, not to fancy, NAS you might have bought the GMKTec G9. On paper it looks awesome. However the case design leaves a lot to desire. Have a look at Jeff…
his is a custom-designed replacement top cover plate for the GMKTEC G9 Mini PC . Whether you're upgrading airflow, personalizing the look, or replacing a missing plate, this model gets the job done cleanly. Included with the download is…
Motivation One of the five original glass shades broke and I did not want to throw the whole lamp im the trash. So I designed a 3D printable shade and hoped that PETG / PCTG would hold up to the temperatures. Spoiler: it does! Printing…
PET-G used, printed with support, 0.6 nozzle, 0.2 layer height.
Add a Qi charger to your Logitech G910 keyboard! Requires: Generic “Qi Charger Module” from aliexpress (as pictured). It's modelled for the Micro-Usb version but it might work with the usb-c one too. M2 Screws and Hex nuts. (2x 8mm 2x…
Simple snap fit mount for the Samsung CR49RG9X
(english below) Umbaukit für einen seitlichen Kabelabgang für Industrie-Radiallüfter, Hersteller ECOFIT (ein Unternehmen der Rosenberg-Gruppe), Typ GREG9 160x62R. Werkseitig werden diese Radiallüftermeist mit einem geraden Kabelabgang…
The battery you can usually find on replacement parts sellers is smaller than the original. It can jostle around if you bang your head as hard as I do when listening to music. Features: Printable in vase mode; Cutout for easy access to…
This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
1 to 1 scale of a MG90S servo. Could be convenient for projects to build in your servo!
This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions
A small robot arm using SG90 hobby servos designed in 2017 and revived on request. I bought the small screws and tools at : https://www.kingmicroschroeven.nl There where still some old videos online: I included the Fusion 360 file so you…
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
See https://www.amazon.com/MMOBIEL-Airplane-Helicopter-Compatible-Raspberry/dp/B09BZTRSDP/ref=sr_1_2_sspa
This is a 3D model of the MG996R servo. It's purpose is to help you design servo brackets and other parts that require a standard sized servo. * Just import this model into your 3D design software and now you have an accurate…
Printed with Prusament PETG White 0.2mm support is required.
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
My make of the Spider robot(quad robot, quadruped)-SG90 by regishsu using an arduino nano and servo shield with 2x 18650 batteries.
A bracket to mount a SG90 or MG90 servo to a plate. Normally printed in PLA with 0.15 mm layer height.
Various rotors for MG995 servos. Models includes a 1, 2, 4 and 6 leg rotor. Options are also included for holes on the legs to mount components to the servo rotor. Fits are meant to be very tight in order to hold up to the force the servo…
I made this mounting plate for a micro servo because my 9G servos didn't have the disc mount which was used in this robot arm model ( http://www.thingiverse.com/thing:1684471 ) It fits my "Tower Pro" SG90 micro servos, which have 20 tiny…
precise replica of the arm that came with my MG90S Servo Higher resolution / more detailed / fixed / easier to print version also available (improved versions)
Logitech G923 Xbox F1 wheel
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
I made them as close the to the original as i could. Print orientation is important! For best results i recommend to print them on the top-side surface (it's the shorter one). If you print them flat they feet will break easily. Material:…
Changelog/News: 2021-02-03: Added new variant "08 Gear rack drive (main body) v5_strongerprint" for easier removal of support structures 2019-02-24: Updated "11 Gripper arm" to v5, implementing these suggestions 2019-02-10: Peter (…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
Slides in between the OEM mounting plate (required) and the display. Print with the front facing down so you can get a nice finish. (Will require support)
Adjustable stand for xiegu G90 with 5 available positions !!IMPORTANT!! Make sure your printer doesn't have any issues with elephant foot, because you may have some problems with teeth to get into radio radiator. Try minimalize it with…
A simple micro servo dummy for help on your creation needs. One thing i had no idea about this servo (particularly the Tower Pro, not sure about others) is that its body is not perfectly square but is slightly tapered towards the top.…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
Reupload of a popular wheel mod for Logitech G racing wheels. This includes everything you need to print it and get racing. G920 Tutorial - This is the video I used to figure out how to install the wheel. When reassembling, don't install…
Wheel center hub replacement faceplate with Nissan GT-R logo, fits the Logitech G29/G920 wheel. I've added additional layers to the logo should you wish to include a color change (red recommended). Remove the screws on the original center…
Print using Dynamic Quality (0.16mm) with 30% infill. The servo horn is an exact fit, different printers/settings will affect the attachment to the MG995 servo. Otherwise, additional force/tools may need to be used.
Small bracket for mounting a SG90 9grams Servo flat against a surface with standaard screws. Recomended to print in PETG or ABS.
Fully printable SG90 Stepper rotors. Might also work with other servos if you scale it appropriately. Category: Robotics
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…
Very simple to print. Use 2 M2 screws for servo mounting and 2 M3x10 screws for the rack
Easy-to-install wall mount for Logitech gaming pedals. Needed to get them up from the floor, to ease access for vacuuming. This is the left part. Mirror to print the right part.
Originally published here: (WIP) Samsung Galaxy S8 g950 case by tato_713 - Thingiverse Thanks to the user pictorf for testing the test case for this phone. This test case was made for the regular Samsung Galaxy S8; for the S8+ see this ;…
This is a pedal extender to move the pedals of Logitech G29/G920/G923 pedal set up 50mm, and cant the angle of the pedal back towards the driver 7 degrees. it adds more precise feel and adjustment through increased travel distance. And i…
20mm disk mount for Tower Pro MG946R servo. Disk diameter: 20mm Disk thickness: 2mm Center hole diameter: 3mm Outer hole diameter (with holes version): 1.5mm Outer hole distance from center (with holes version): 8mm They should be a tight…
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
It's better to use SG90's screws. Discover my miniatures, keychains and others models on my Printables page.
I lost one of the spacer bit for my g920 and decided to model the one I still had in fusion 360. Print settings I used: Layer height: 0.2 10% gyroid infill Brim adhesion
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. Für jeden Audifan also ein muss. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um…
This is a custom-designed servo horn made specifically for the MG90S micro servo . It’s intended for projects that require 2 mm-diameter connections , such as lightweight linkages, control arms, or small mechanical assemblies. Although I…
Micro Servo Wing SG92R Horn Replacement wing for SG92R Micro-Servo Print instructions Unassociated tags: hybrid world, Micro Servo, micro servo parts, servo horn, servo piece, servo replacement Category: Robotics Print Settings Printer…
Wheel center hub replacement faceplate with BMW logo, fits the Logitech G29/G920 wheel. I've added additional layers to the logo should you wish to include a color change (recommended sequence black/white/blue). Remove the screws on the…
A custom pulley designed for my finger-servo project! This is a modified GT2 6mm, 20-tooth pulley that perfectly fits the MG90s servo. I printed it using PLA with a standard 0.4mm nozzle and a layer height of 0.2mm, with a slower print…
SG90 Servo Motor
Simple knobs for Xiegu G90 You can choose between standard version, and second one with rubber oring to improve grip, i used 22x2 oring CAD files included Print settings: Layer high: 0.2mm Infill: 20% Depending of your printer nozzle and…
Nur noch ein Arm. Seht euch auch Typ1 und Typ2 an.
The SG90/9G servo is very popular - and every time I see it in a project (including my own ) the little white plastic connector that comes with the servo is used (because the connector has tiny teeth that are not printable). For my next…
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. Für jeden Audifan also ein muss. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um…
This is a VESA adapter for a SAMSUNG Odyssey G9 OLED. I realized the OLED Version differs from the QLED mount. So I took a picture an designed one by myself. It is in use right now. What you need 4x M4x30mm (to connect the display to the…
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um dies umzusetzen. :-) Kein Spacer…
These buttons are designed for the Logitech G29 but are also compatible with the G920 sim racing steering wheel. They feature a press-fit design that’s easy to install yet simple to remove if needed. Additionally, they can be securely…
Hi, I made a 3D model of a SG90 Servo Steering Gear, 20 tooth, 0.5 Mod 20PA. This is used in my project '35 KPH FAST Lego RC CAR - Lego RC Car Part 2' on my YouTube Channel TinkerTown. Check out the details there.
>>>Newer Altered Version Available<<< I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days. I modified the slider for increased durability and smoother movement, and I remixed the top plate for added…
http://www.modellbau-wiki.de/wiki/Behelfspersonenwagen A MDyg 986 in gauge 1 (1:32) will be ~700 mm long. Luckily the Deutsche Bundesbahn MDyg986 "Behelfgepackwagen" is very symmetrical. I "only" needed to design a quarter of this express…
Print Settings (that worked for me) PLA+ 2 walls 10% infill No supports and I didn't use a brim or raft while printing
Basic servo arm/horn that I remixed in a few minutes for all of your dual-armed needs! Surprised that there wasn't a model like this already considering how easy it was for me to make, but hey, there is now one of these ready for your…
Protects your pedal cable, preventing it from being crushed against the wall when breaking. Essential modification for those who don't have a cockpit.
An extension arm to get a longer reach for the MG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the SG90 servo's
Please comment, rate, and post a make! I'd recently picked up a Samsung Odyssey G9 OLED (affiliate link) and wanted a way to mount the power brick to the underside of my desk. I found a model, but wanted to use screwed instead of tape. No…
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
Original model was too tight and mounting holes are to narrow/far for some racks. Print 2 one for front and one for the Back. I used ABS to print it you can also use PETG. More infil - stronger part! I used 4 walls, 5 shell layers, 10%…
Snap on extensions for using larger wheels.
The Final Shifter Mod… Modular sequential shifter mod for Logitech G Shifter (G29 G920 G923) and H-Pattern stiffness improvement. Only 4 M3 x 16 screws + Nuts needed. I moved the slider on top of the shifter mod to make it more versatile…
Thank you so much to inlinerbutch who made the inital stand that I remixed from! This is a fantastic stand that folds up nicely to pack up my G90 . Unfortunately there were some sharp right angle corners on the stand that happened to snap…
This 3D printable Power Brick Holder has been meticulously designed to enhance your gaming and workspace experience with the Samsung Odyssey G9 - 49" monitor. No more tangled cables or unsightly power bricks cluttering your desk; this…
This tray was made in a state of emergency after I received a replacement SIM card and broke the original SIM card tray in the tray slot. Remakes sold on Amazon, AliExpress and others would have taken weeks to arrive, rendering me without…