388 models
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
Google Nest Mini 2nd Generation Wall Plug Mount. Only tested with US power supply. Enjoy
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Date Description 18/09/2024 Updated models for gen 2 & 3. Slightly enlarged the ring and the cable groove for an easier fit. 03/01/2024 Fixed a mix-up in the files. I had not uploaded the right ones for the Pixel Watch 2. 02/01/2024…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Monkey Skull Chalice. HOW TO VID.
Print approx. €14.90–€18.22 excl. taxPreliminary estimate for one variant
This is a holder for the amazon alexa 3rd generation, to hold it using the UK plug that comes with it. There is space behind the alexa to hold the power cable Supports are required, i used the tree supports which were easy to break off,…
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for one variant
Boční silueta Hondy Prelude 5G
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Try out the presliced .gcode including color changes or try out other variants/sizes! Please upload photos of your print. Would love to see how it turns out for you!
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple plate with a threading for a standard ¼-20 UNC tripod screw on the bottom and a rim on top to allow snapping in-place a ~73mm circular base, such as the one that comes with the first generation Google Nest Indoor Cam. I…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Intel NUC Cover Plate MMU by Keks95 on Thingiverse: https://www.thingiverse.com/thing:6595145
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for one variant
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Intel Nuc VGA Port Blankplate Bracket by Keks95 on Thingiverse: https://www.thingiverse.com/thing:6594029
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This adapter allows for using a 5 Generation iPad with a Bluetooth keyboard designed for an iPad 2. This adapter receives the iPad 5th Generation and mimics the shape of the edge of an iPad2 so that the iPad 2 can be placed in a Bluetooth…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
The Lattice Lamp Shade features an intricate, organic pattern that casts beautiful shadows and adds warmth to any interior. Designed for E27 fittings, it pairs effortlessly with modern or minimalist spaces — turning light into…
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
Simple wall mount for your Apple TV, so it doesn't have to lie and float, but can instead hang neatly on a wall. Fits Apple TV bracket 4K (3rd generation) ATTENTION Does not fit the older models! Apple made the 3rd generation 4K slightly…
Please comment, rate, and post a make! All product links are affiliate links. This is a remix of the best Fire HD tablet mount for the new Fire HD 10 . Changes: Fully constrained and named sketches (can be resized without other parts…
This is a sleeve for the Apple AirPods 3rd generation. I printed them in Ninjaflex 85A (shore hardness). Other flex materials might work aswell. I also added modifier to generate a cutout for the charching LED and / or a engraving of your…
This is the new version of my AirPods Pro dock and Apple Watch charger. Supports are only needed fot the parts that are touching buildplate. A layer height of 0.24 is recommended, you shouldn't go higher than that. I printed it with a…
Modified to fit 2nd gen tacoma. slide in the tab on the right side first to get a firm hold and then use the screw to secure it in place.
Introducing the latest innovation in the world of shopping cart coins: the all-new, upgraded version of the wildly popular original! Suitable for European, and possibly other, shopping carts. https://www.printables.com/model/408121 This…
(Latest Model) - WI-FI + Ethernet
This remix is optimized to be printed on a Prusa Mini+, so it's less than 18mm wide. PLA 0.2mm layer height 15% infill no support Optimize or modify the models: Use the original file from @RomainDewaele, find the link in the original…
2026.01.13 - Moved github links to codeberg. 2024.01.17 - Adafruit has a replacement for the main arduino board now. No code changes will be required, as the only change is to the accelerometer. The codeberg code doesn't use the…
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
This is an Echo 4th Generation Stand, inspired by HomePod Stand by FANBOY by malencar https://www.thingiverse.com/thing:3943055 Please head over to him and give him a like and some love for his great work!
A simple and clean iPod touch case. The case was designed for the 7th generation iPod touch but but will also work with generations 5 and 6 as the dimensions are the same. Printed in PLA with no supports.
Print at a low layer height, I used .08mm layers. I used auto body filler, and sanded up to 1200 grit. Use automotive primer and sand again. Painted with: Rust-Oleum Metallic Aluminum Krylon Gold Fusion Krylon Gloss Black And added a…
I made the 3D model from scratch but got the idea from Kindle paperwhite 4 grip. PLA. Took about an hour to make. Fits the kindle paperwhite 11th generation. 74.2 x 124.6 x 8.1 mm Slight issues with model that do not effect the print or…
Printed it on a Geeetech I3 with 0.6mm nozzle to cut the printing time. The original model used a hard plastic (PLA/PETG). Tried it with Esun Grey TPU and it turned out acceptable. Used supports but they were tough to remove. Printed the…
For all MINI lovers I designed wall holder for 2.G keys! It is possible print from two colours acc. to colours of your MINI! Print instructions 0,1-0,2mm layer height infill 20% no supports needed
This is a wall mount for the 4th and 5th generation Echo Dot, which can be mounted with two screws. The device fits tight into the mount, the light ring at the bottom remains visible and there is enough space for the power plug. The…
A simple and minimalist wall mount for your Alexa Echo 3rd Gen. It only needs 2, 3.5mm screws. The model is filament-saving, it only takes 8grs!. Enjoy! :) Print Settings: 0.2mm Layer Height No Supports Infill: 20% PLA
Here's my take on the Type 3 phaser rifle. The idea was to get the details and contours looking good and to be able to assemble it without the need for extra hardware like metal/pvc support rods. The strange looking peg arrangement may be…
This is an Apple SE 3rd Generation phone case printed in TPU to protect the phone's exterior. It neatly fits the phone chassis. The cover has pockets on the inside to clear the buttons. I have also added the ‘+’ and ‘-’ symbols for the…
Pokemon Generation 5 Unova Gym Badges These were designed to be printed with different colors, pausing to swap colors out at a certain height. Where to pause depends on your layer height, but it should be easy to figure out in your…
Mitsubishi Lancer 8. Generation (CY0) hood prop rod clip Print from Petg/ABS/ASA Support needed!
Bracket for vertical wall mounting of a 1st generation Alexa. Printed with PLA.
I needed a cover for my Ring doorbell to protect it from the rain and also need a wedge to increase my vision of my front door. I adapted this model https://www.thingiverse.com/thing:5240779 to have a wedge shape, and also filled in the…
This 3D model represents a replacement protective tip designed specifically for the 4th generation TipToi pen. This tip ensures the longevity and functionality of your TipToi pen, providing a cost-effective solution for maintaining its…
2021 iPad mini case (6th generation) The night I purchased my iPad mini my puppy jumped into my lap to see what was in my hand and the iPad almost slipped through my fingers. After looking at cases online ranging from $20 to $60 (why…
This is a 2-part Ipad case I designed to fit the 10.2-inch Ipad 7th generation device. I designed this in Fusion 360 and this is my first time using the program. The model is untested but was built using a scale model of the iPad. I…
Pokemon Generation 4 Sinnoh Gym Badges These were designed to be printed in different colors by pausing during printing and swapping out colors. Where to pause depends on your layer height, but it should be easy to figure out in your…
I wanted a raised platform stand for my echo dot, so I created this tripod stand inspired by some of the 4th generation tripod stands I've seen. You can simply place the echo on top or use a little 3M mounting tape to securely hold it in…
This is a case for the iPhone 7 or iPhone 8. It must be printed in TPU or other flexible filament or else it will not fit your phone. Originally posted 10-08-2016 at https://www.thingiverse.com/thing:1814855
Dimensions: 200 mm x 52 mm (diameter x height) Easily scalable to any size you require
Blank version of my grill emblem for a 2nd generation Dodge Ram. My Ram is a 99 and it fits pretty good. Category: Automotive
A piece of plastic to hold your cable on the model3 and modelY tesla 2nd generation interrior trim. Check this other design to understand how it works. https://www.printables.com/fr/model/214285-tesla-model-y-center-console-cable-holder…
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
V3 Moved the phone farther out and angled/tilted it up/back at 75 degrees (or leans back 15 degrees). I removed the bracing and printed in PETG and it's been working fine. Added Fusion 360 files (f3d, 3mf, stl). V1 Designed to fit the…
Pokemon Generation 2 Johto Gym Badges These were designed to be printed in different colors by pausing during printing and swapping out colors. Where to pause depends on your layer height, but it should be easy to figure out in your…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Please comment, rate, and post a make! All product links are affiliate links. This is a remix of the best Fire HD tablet mount for the new Fire HD 8 . Changes: Fully constrained and named sketches (can be resized without other parts…
After my quite old ebook reader fell down it immediately broke. The material of the front cover was that much brittle, that it even broke into thousands of tiny pieces when I tried to remove it. Even tough the device is now out of…
This is a recreation of the cover art of The Prodigy's Music for the Jilted Generation. It's also called The 20th Century Scream and was originally created by Jonathan Tucker-Bull and slightly added to and photographed by Stuart Haygarth.…
Pokemon Generation 8 Galar Badges These were designed to be printed with different colors, pausing to swap colors out at a certain height. Where to pause depends on your layer height, but it should be easy to figure out in your preferred…
Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…
6th GEN fighter mockup ripped from the wikipedia page. It's scaled and fixed to be printable. It wasn't made to be printed, good luck with finding good supports settings. The tail wings are one layer thick so very fragile.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Wall mount for a Lenovo M10 Plus (3rd Generation) tablet. You have access to the physical buttons (wake-up and volume), cutout for a 90 degree charging cable and the camera in the top center. The charging cable is UGREEN "USB Type C Cable…
The print-in-place ring mechanism has two versions with different tolerances. Make sure your elephants foot compensation is set properly to prevent the hinge from seizing. The loose version has a minimum gap size of 0.3mm, and should work…
We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This display base is a remix of Lucky 13's display base with 3mm and 5mm pegs to peg into any of those sized ports on Transformers Generations figures. However, some figures are a bit too heavy and cannot be completely supported in the…
In terms of size, I shaped the ball end based on my hand - usually wear a size large glove, if that helps. I also kept the overall height just tall enough to cover the threads when screwed down - never quite liked how gaudy and huge the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mount for your Apple TV (4k, 3rd generation). This can be used on any flat or vertical surface - but was designed to be mounted under a table or desk. Includes features that allows for the AppleTV to be inserted or removed even when the…
This is a new take on my Counterswirl Top . The original top had 2 arms twisting clockwise and 10 arms twisting counterclockwise. This has 3 and 12, which increases the mass and lessens the impact of small irregularities or alignment…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This bracelet shape has lots of success. I've generated it from https://n-e-r-v-o-u-s.com/kinematicsHome/ Print instructions 100 % fill-in preferred for clip parts. 20 % makes it well for the rest. Clips sometimes don't print perfect so…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
3d printed part for the white plastic liner inside the dock port on the ipod 3rd generation. The original plastic part tends to snap and i noticed mine had on doing the flash mod. This should work as a replacement liner. It will need to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I uploaded my original Mini Desktop Case to Thingiverse in March of 2020. For the last two years I've been printing those (and similar) cases to sell on my little Etsy shop. In that time I've done five clean sheet of paper redesigns, each…
(English version below) ich suchte nach einer Möglichkeit, zusätzliches Werkzeug im Deckel der L-Boxx zu befestigen, wollte aber dabei nicht auf Lösungen zurückgreifen, bei denen ich die Halter einkleben muß. Die Ideen von @fns720 (…
This is an STL for a Kindle Paperwhite (11th Generation model M2L3EK), I designed to use as a digital mold to make a case.
This was created in Fusion 360 from a 2d piece of art I found on the internet. Slice it at 0.2mm and each color change will fall exactly on a new layer. Throw in an M600 command anywhere you want to change colors and print away. These…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap…
18" Doll stand for Generation Doll or Designer Friend, can fit other dolls. Simple design of 3 parts. Height 27.5cm Base plate I changed the infill to 30% to give bit more weight 3mf file included with 2 sets on one build plate V2 - added…
I find it best to print the oval at a 45 degree angle using normal supports in Cura. and the delta pieces face down on the print bed. assemble with glue and use magnets to attach to your shirt.
Halter um einen Amazon Alexa Echo (3.Generation) an einer Wand, Schrank oder Ähnlichen zu montieren. Das Kabel kann nach unten oder unsichtbar nach hinten geführt werden. Optional kann der Echo von unten mir dem Gewinde befestigt werden.…
I would recommend printing front and back separately for minimum supports and then glueing them together. However, I attached a complete model as well, but I've never tried printing it. Please be extremely cautious when removing the…
A three position mount for a micro servo on an 8020 series 10 extrusion. Print instructions Unassociated tags: 8020 series 10, micro servo Category: Electronics
This is a wall mount for Amazon Echo Dot 4th or 5th generation.
Simple NUC6 mount plate for under desk or wall mounting.
Aus dem Roddenberry Archiv in die reale Welt. Gedruckt mit Holz-Filament - dass läßt sich gut schleifen. Für ein bessere Ergebnis habe ich die base geteilt. Ich habe mit einer 0.5mm Nozzel mit 1mm Schichthöhe gedruckt.
Sometimes buying old parts for cars is not worth the effort or cost. Plus you end up with a crappy old part to replace a crappy old part. Whats the point? So off to Fusion 360 to design and make a cap. Fits great. Hasn't fallen off in…
OpenScad module for pulleys 3 examples STL files Instructions Just change parameters to suit your needs. Category: Other
Replacement tip for generation 1 TipToi pens by Ravensburger. If the tip of your TipToi pen is dented or deformed it may not work properly anymore. To fix the tip just remove the top most part of the tip until the opening is cleared…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
Plug for the driver's seat of a 2nd generation Honda Fit (GE) that covers a hole in the seat after removing the armrest. I removed the armrest on mine because the fabric was torn, and it was uncomfortable anyway. This plug screws in to…
The Paperwhite is very light weight but very hard to hold. These grab bars solve the problem. I liked these 2 designs, but they didn't work for me. They inspired me to create a new model.…
A stand for an ipad 7th generation at a slope of 15 degrees for writing or drawing on it. Has a pen holder of diameter 10mm. Is printed in 2 halves so that it can fit on most print beds, tolerance of 0.12 mm on the slots so should fit…
Demo video: https://peertube.art3mis.de/w/xk4FYHjtFn7LpKPURgXS5J This is going to be a challenging build. Your best chance for success will require some experience with model building and hobby electronics assembly / soldering. For this,…
Need a way to pay at the Our Generation Cafe? Use this terminal from Square! This Square credit card terminal is for American Girl / Our Generation dolls because it's at 1:3 scale but you can modify the scale. This terminal has a hole to…
I made an Alexa Echo Dot 3rd generation wall mount. No Supports needed
Model made from the legendary game generation zero, if you haven't already get yourself the game and a few DLCs with bundles, join the resistance of Ostertorn and take on the finx taking over the island, pick up loot and arm yourself with…
This is a wall mount designed to fit a 2nd generation Amazon Alexa. It is designed to be printable without support material. This was not fully printed and tested, so cable fitment may need adjustment. This may fit the Echo Gen 1 as Gen 1…
Vintage Look Retro TV Cover for Echo Show 5 2nd generation.
