Search results: gim

Sort order

1,115 models

P
PrintablesNicG

Beer/Soda Can Travel Gimbal

I was super impressed with mobiobi 's Universal Travel Coffee Gimbal but, being a man who enjoys beverages with more of a sparkle to them I deemed it necessary to have a Universal Travel Beer/Soda Can Gimbal that I could attach to my Golf…

Downloads
1,380
Likes
328
Rating
5
P
PrintablesDMS

Digivice Digimon Adventure

Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…

Downloads
1,027
Likes
204
Rating
4.5

K-9 Rocket Thrust Vector Control Gimbal V8

Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…

Downloads
931
Likes
54
Rating
0
P
PrintablesKubiV

Radiomaster BOXER Gimbal Protection

Protection For Radiomaster BOXER Controller Gimbals

Downloads
531
Likes
33
Rating
5
P
PrintablesC3PO

gimme some wine (glass holder)

OMG look at those photos. You just got to download and like this modle. cheers again,

Downloads
522
Likes
138
Rating
5
P

GoPro 10 Bracket for Feiyutech G5 Gimbal

this Object is a Bracket for a Feiyutech Gimbal because the GoPro 10 doesn't fit in the Original Bracket

Downloads
73
Likes
1
Rating
0

Turntable (Platter, Gimble, Spindle, ToneArm Pivot, 2 part base, and head shell)

Turntable platter for dyi turntable project. Belt driven Designed gimble headshell and pivot for gimble join tone arm base to motor base with rubber/foam tape to isolate motor noise from tonearm base or make wooden base and use pre-made…

Downloads
61
Likes
15
Rating
0
P
PrintablesBill Porter

Gimbal Power Button Protector

The FeiyuTech WG2X gimbal's power/mode button is easily pressed if transported not in a purpose built case. It can also be easily depressed while in operation. This model adds a ring around this button making it recessed and much less…

Downloads
14
Likes
0
Rating
0
P
Printablesmobiobi

Universal Travel Coffee Gimbal

So this is a gimbaled to-go coffee cup holder. Fully 3d printed, assembly is just spin the bolt in. Designed to clamp a bar 20-30mm in diameter, as well as flatter things, like dashboards, etc. The diameter should fit a large double…

Downloads
7,609
Likes
2,892
Rating
4.89
P
PrintablesGimulabhouse

LABUBU ORIGINAL VERSION GIMULAB HOUSE MAKASSAR

labubu with orginal version you can donwload here

Downloads
6,061
Likes
260
Rating
4.83
P
PrintablesGimulabhouse

Hippers mini Figure Sonny Angel Original From Gimulab House

enjoy just donwload and like share my design

Downloads
3,275
Likes
101
Rating
4.75
P
PrintablesEyeZack

Clamping Camping Gimbaled Drink Holder

NOTE: Don't use Cura Slicer for the Dino Clip, it calculates voids in the print and will cause failures. (Hat tip to Ian B. for figuring this out the hard way!) The start of this description is that I'm a confessed “Dino-Clipper”, I have…

Downloads
2,810
Likes
1,335
Rating
5
P
PrintablesGimulabhouse

Labubu Pop Mart Original Version from Gimulab House Makassar

please follow, like and share if you want im upload anymore

Downloads
2,479
Likes
106
Rating
5
P
PrintablesSteve Eckerlein

Cheap FPV Gimbal - Pan/Tilt

This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace. The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for…

Downloads
1,491
Likes
284
Rating
4.6
P
PrintablesIzlud

Radiomaster Pocket Gimbal Protection

If you want to preserve the thread of your sticks : print this model !

Downloads
1,292
Likes
117
Rating
5
P
Printablesolex

DJI FPV / Caddx Vista / Air Unit pan/tilt gimbal mount for FPV aircraft

This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…

Downloads
1,287
Likes
124
Rating
5
P
PrintablesVoltex

Improved Radiomaster TX16S Gimbal Protector

I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…

Downloads
1,112
Likes
69
Rating
5
P
PrintablesHandsomePotato

Radiomaster zorro gimbal protector

I really like the zorro, but I needed something to protect the gimbals in my bag. So I whipped this together. It's a simple gimbal protector for the radiomaster zorro. Rotate 180 (print upside down) in your slicer to print without…

Downloads
1,095
Likes
44
Rating
4.64
P
PrintablesIPCreative

DJI Avata 2 Gimbal Bumper

Bumper guards for DJI Avata 2, fits in original holes but you will need 4 longer screws M1.6x10mm. Printed with PETG 100% infill, 0.15 layer, without supports.

Downloads
1,067
Likes
87
Rating
0
P
Printables@moldesgroot

Pesas Gimnasio Lady Fitness Dumbbell Home Fitness 3D Print Pequeña mancuerna Portátil Portátil Pérdida de Peso Artefacto Musculación

Home travel and fitness exercises and fitness dumbbells are very easy to use and can increase enthusiasm for fitness. It can meet your different training needs. Suitable for women or children to lose weight or exercise. Adjustable weight,…

Downloads
1,011
Likes
58
Rating
5
P
PrintablesFinz

Digimon V-Pet Deck Box

A deck box for the digimon card game, designed to look like a v-pet. Three versions are available, one for single sleeved and two for double sleeved decks (one for decks using inner sleeves and one for outer sleeves). All fit 50 card main…

Downloads
987
Likes
122
Rating
5
P
PrintablesTonyP

AnyCubic Kobra 3 X-Axis PTFE Tube Gimbal

This is an An improved and more functional freely rotating X-Axis Gimbals mount for the Anycubic Kobra 3. This X-Axis Gimbals mount is a direct replace for the factory provided mount. Gimbals Outer Ring with rotating dovetail mount is a…

Downloads
955
Likes
115
Rating
4.86

Walksnail Moonlight and Caddx GM3 Gimbal Mount with Fan and Cage

Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…

Downloads
950
Likes
51
Rating
4.75
P
PrintablesZtoundas

The Gimbalotl: A 3-Axis Joystick Gimbal

Credit to my son for the name; it's fun to say. EDITS: See bottom for details A long time ago I got excited and found that gimbal design by ulokelo and asked my neighbor to print it. He did, then I learned it had no Z axis and I got sad,…

Downloads
941
Likes
145
Rating
5
P
PrintablesKatDelgado

Gimli Helmet Cosplay

My friend wanted a Gimli helmet from the LotR movies. I wanted one good enough for a gift, so I made one. I made this from scratch based on frames from the movie which I screenshotted myself. No AI. I looked for other helmets online, but…

Downloads
933
Likes
167
Rating
5

Radiomaster Pocket Gimbal Spacer Lowered Gimbals

🌟 Unleash Comfort: Radiomaster Pocket Gimbal Spacer Installation! 🌟 Ahoy, fellow aviators! Since embracing the Radiomaster Pocket, I've been soaring through the skies with joy. However, a tiny hiccup emerged – the thumb position felt a…

Downloads
929
Likes
140
Rating
5
P
PrintablesMartin_au

Skimmer Pod and Camera Gimbal (For DSLRs, Mirrorless, etc)

This is a ground pod, and camera gimbal for wildlife and macro photography. It is mostly 3D printed, and just requires a couple of bearings and some nuts and bolts. It is quite strong enough to hold my camera (~ 1.6 Kg) and I wouldn't…

Downloads
907
Likes
249
Rating
5
P
PrintablesJaatinen

Gimbal Christmas Ornament

Geeky wibbly-wobbly print-in-place Christmas ornament that has endless configurations and they all look great!

Downloads
804
Likes
182
Rating
4.79
P
Printablescpmatthew

US Army Engineer Regimental Castle

A created this model in Tinkercad based on the US Army Corps of Engineers insignia. The turrets are hollow inside, so you will need to add supports or fill them in to print.

Downloads
762
Likes
64
Rating
0
P
Printablescpenner

Cup Insert for Universal Travel Coffee Gimbal

This is a cup insert for the Universal Travel Coffee Gimbal. It allows a can/bottle/etc. to be used with the gimbal. I used the small coffee insert ring as a starting point and added a cup holder body large enough to hold a 355ml can (and…

Downloads
712
Likes
109
Rating
3.75
P
PrintablesspectrexFPV

Radiomaster TX15/TX15 Max Gimbal Stick Protector

What should've come with the radio... Features Fits both stock (10mm) and wider stick ends up to 16mm in diameter Full protection on toggles and dials Anti accidental power-on Customisable name plate area Recommended Print Settings…

Downloads
698
Likes
31
Rating
5
P

Digimon Adventure: Tag & Crest (Interchangeable)

I couldn’t believe this wasn’t already an available model! Here’s my version of the Tags and Crests found in Digimon Adventure, so you too can relive your dreams of being a Digidestined. The tag is approximately 53mm tall, perfect for a…

Downloads
687
Likes
103
Rating
5

Clip-on Flysky I6/I6X gimbal and Switch Protector

This is a gimbal and switch protector the the Flysky FS-I6X Transmitter. It clips on where the lanyard would go. It may work with the Flysky FS-I6 but I don't have a transmitter to test it on. If someone prints it for the I6 and it fits…

Downloads
684
Likes
54
Rating
5
P
PrintablesspectrexFPV

RadioMaster Gimbal Stick Ends Set [New Updates]

RadioMaster Gimbal Stick Ends Set Unless specified and/or for heat set inserts, all stick ends are designed for flexible materials. i.e. TPU, TPE, etc. In case you need some clarification: M3: Radiomaster Pocket, Zorro, TX12 Jumper T20,…

Downloads
681
Likes
42
Rating
5
P
PrintablesDesignMakeTeach

MOM Gimbal - Print In Place

The MOM Gimbal (MOMbal) makes a great 3D printed gift for Mom. Based on an original design by Bluebie. Learn how to customize your own gimbal at http://designmaketeach.com/2014/05/06/3d-design-personalize-a-gimbal/ This thing was made…

Downloads
671
Likes
71
Rating
4.8
P
PrintablesScout339

Gimbal Extensions - Xbox One, Xbox 360, PS4

I was really pissed off one day using the Xbox sticks trying to shoot heads when I got used to my FRSky Taranis RC controller, and ever since I could tell I can be much more precise with the gimbals on the RC Transmitter, so I died in a…

Downloads
666
Likes
94
Rating
5
P
Printablespaul020559

Gimbal Converter for DJI Mini 2

Gimbal Convertor for DJI Mini 2 Converts your drone into a 4K hand held stabilizer. This project came about as I needed 4K footage with a camera on a Steadicam which is heavy, cumbersome and requires a LOT of practice. The alternative was…

Downloads
630
Likes
181
Rating
5
P
Printablesmodsmthng

different housings for GaggiMate LilyGo S3 AMOLED 1.75 inch, smthng housing 4

All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…

Downloads
592
Likes
25
Rating
0
P
Printablestubbers

TBS Tango 2 Gimbal Guard / Tango II

TBS Tango 2 Gimbal Guard - protect your standard edition gimbals. This is a basic gimbal guard for the new TBS Tango 2 remote control. It is designed for the standard edition that doesn't have the nifty folding sticks. There are 3…

Downloads
584
Likes
15
Rating
5
P
PrintablesJulez

DigiBox: A Custom Deckbox for the Digimon TCG

This “Digibox” can hold a deck of 55 sleeved, standard size cards. The sliding-frame can be used as a display window for the main card of the deck. A memory token is also included and can be placed inside of the main box. The three pieces…

Downloads
579
Likes
72
Rating
5
P
PrintablesTriton Print

Gimli's Axe for Lucky 13

You can see the application video from the following link: Resolution: 0.2 mm Nozzle: 0.4 mm

Downloads
568
Likes
106
Rating
5
P
PrintablesTehStig

Object 77b v2 Gimbal - Remix for Thrustmaster T16000M

This is not my design. It's a joystick remix of a gimbal designed by user Karavan on IL-2 Sturmovik forum: https://forum.il2sturmovik.ru/topic/13252-3d-печатная-механика-объект-77-б/ and shared on Thingiverse and v2 on Thangs. Images and…

Downloads
563
Likes
88
Rating
0
P
PrintablesZ3Dart&tech

Keyring Scout's regiment a.o.t

Keyring Scout's regiment a.o.t multicor print with color change using M600 command 0.2 layer height

Downloads
558
Likes
111
Rating
5
P
PrintablesBunsenbrenner14

2 Axis Camera Gimbal

This is a 2 axis motorized gimbal for Cameras. Its driven by two nema 17 short stepper motors and as control unit we use an ESP8266 but any other arduino like microcontroller should work. This project is work in progress. We printed it…

Downloads
550
Likes
43
Rating
0
P
PrintablesRCMakerLab

FPV Head Tracking Gimbal

All parts can be printed with PLA. Layer: 0.16 or 0.2 Infill: FullAll

Downloads
534
Likes
118
Rating
0
P
PrintablesDrJones

customizable gimbal/gyro fidget

Not a new idea, but this one is customizable using OpenSCAD. You can choose gimbal pivots, size, number of rings etc. Customizing: Download, install and run OpenSCAD, it's completely free (open source; Win/Linux/Mac), load the scad file,…

Downloads
504
Likes
41
Rating
4.75
P
PrintablesMartin_au

Phantom 4 Pro/Advanced Gimbal Lock

Designed to print with either no supports or minimum supports, and orientated so that there are no weak points, particularly at the leg clamps. There are two versions: Gimbal Lock.stl, which is about the same dimensions as the original…

Downloads
502
Likes
21
Rating
5
P
PrintablesJulian0815

2026 Gimbal Lucky Charm / Glücksbringer

2026 Gimbal Lucky Charm / Glücksbringer with different ring clearances from 0,20 mm to 0,35 mm. Beside the different clearances, the Gimbal Lucky Charm is also available in different versions: 2026, for single tool 2026, for multi…

Downloads
493
Likes
49
Rating
5
P
PrintablesSkeleton Dan

Agumon from Digimon (main character from the OG TV show)

Agumon from Digimon (main character from the OG TV show)

Downloads
488
Likes
59
Rating
5
P
PrintablesFinz

Digimon Markers (Counters) and Box

Two versions of the markers and box are provided, a mono-colour version and a multi-colour version. The multi-coloured version has the dragon logo from Tamers (season 3) on the lid and white lettering on the markers The mono-coloured…

Downloads
480
Likes
36
Rating
0
P
Printablesmilos

Raspberry Pi HQ Camera Drone Gimbal

1. Introduction Hi! In this post, I will be covering everything about a simple drone gimbal I designed for the Raspberry Pi HQ Camera using the small & cheap SG90 servo motors. My goal was to design a simple-to-make and simple-to-use…

Downloads
473
Likes
31
Rating
0
P
PrintablesModel Magic

Lord of the Rings - Gimli

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
463
Likes
75
Rating
5
P
Printablesmofosyne

Gimbal Bicycle Cup Holder (OpenSCAD)

This is openscad code for mounting a coffee cup to a bicycle. RevB - Noticed that the bottom tab breaks, so replaced the tab with a zip tie well instead. So should be more sturdy this time. Also reduced cup diameter to 70mm to make it…

Downloads
443
Likes
88
Rating
5
P
Printablesmodsmthng

GaggiMate smthng display housing 2 (with frame)

Before pushing the display into the housing, please make sure that the flat cable is centered over the cut-out. It is best to familiarize yourself with the installation instructions before installation (found in the files). All smthng…

Downloads
438
Likes
28
Rating
5
P
PrintablesTakoza

Digimon Vpet Deskstand

a simple lil deskstand for your Digimon. brick-pendulum-DMmini. blank or with a hatching digitama.

Downloads
436
Likes
52
Rating
4.75
P
PrintablesQrome

Radiomaster TX16s Gimbal Covers

Joined gimbal covers for the Radiomaster TX16s radio. These are printed in PLA with a color stop part way. Black Hatchbox PLA: https://amzn.to/3sOiSnG Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…

Downloads
429
Likes
43
Rating
5
P
PrintablesMoonDonki

TBS Mambo Gimbal Protector

Team Black Sheep Mambo Radio Gimbal and Switch protector. Locks in place with strap clip.

Downloads
419
Likes
21
Rating
5
P
PrintablesGiulio Librando

DJI Disassembly Gimbal Tool for DJI Mavic 2 Air 2/2S Mini 1/2/SE

A tool needed to remove the rivets to replace the gimbal arm pieces. Sold on Alixpress (https://it.aliexpress.com/item/1005004380252138.html) at 80$, i decided to recreate it by myself (hopefully you'll need it just once). Must be printed…

Downloads
400
Likes
61
Rating
5
P
PrintablesChrisVaisnor

Pan & Tilt Stepper Motor Gimbal

Onshape CAD Files Link: https://cad.onshape.com/documents/ce3d186c97cf022fbc6c944c/w/f5a358a3bfa4075fd7a89aa0/e/f4e9a91ea5a82f905922a838?renderMode=0&uiState=6a4e9be1bd0df23c48730cbc Bearings are 6004 (inside diameter 20mm, outside…

Downloads
374
Likes
42
Rating
0
P
Printablespmeineke

Digimon Logo

Digimon Logo 1st layer Black 2nd Blue 3rd Yellow Credit Rachael Sitzman

Downloads
357
Likes
51
Rating
5
P
Printableswm

Arc-Gimbal

A big and a small arc-gimbal, you find the sources here: https://www.youmagine.com/designs/arc-gimbal It prints great, so i like to republish it here.

Downloads
356
Likes
47
Rating
5
P
PrintablesEmpiricus

Mavic Pro Lens Shade and Gimbal Protector

A sturdy shade and a gimbal protector for the Mavic Pro. Couldn't find one that fits well and I kept loosing them in high wind. After inserting the hooks in the front, push with both thumbs from the back forward and down to lock in place.…

Downloads
349
Likes
21
Rating
5
P
PrintablesJ.P.

Remix coffee gimbal

Oops, I embarrassed myself. I didn't look in the comments of the original and didn't see that there was interest in my remix. I'll make up for it now and apologize. Better late than never… You can move the clamp in any direction you want…

Downloads
345
Likes
69
Rating
5
P
PrintablesTonyP

Anycubic Koba 3 PTFT 9Tube X-axis Gimbal Mount

Any Cubic Kobra 3 X-Axis PTFE 9 Tube gimbal. This is an new design that was requested by a user for a gimbal mount that can handle 8 PTFE tube from 2 Ace Pro units. This gimbal mounts allows freedom of movement in all axis relieving the…

Downloads
342
Likes
32
Rating
5
P
Printablesmodsmthng

different housings for GaggiMate Waveshare S3 AMOLED 1.75 inch, smthng housing 4

All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…

Downloads
335
Likes
26
Rating
5
P
PrintablesAnton

Radiomaster TX16S gimbal protection EZ to print

Did not like what I saw on thingiverse. 3D printers don't print very nice in the air, especially when you want ABS, HIPS, ASA, anything other than PLA, so I designed my own, where you can print it out of separate pieces and assemble it…

Downloads
335
Likes
14
Rating
5
P
Printablespiero menetti

Radiomaster TX16S gimbal and sticks protection NEW!

Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…

Downloads
333
Likes
29
Rating
0
P
Printablesvajonam

coffee gimbal for clicgear

a remixed outer ring for the gimbal from universal travel coffee gimal model. this fits most clicgear cart using its mounting pegs on the side of the cart. print on its back and it should print without any supports.

Downloads
332
Likes
54
Rating
0
P
PrintablesNoPlanNomad

Olukelo joystick gimbal threaded arm and sensor mounting

Remix of the Olukelo gimbal that has threaded arm with mounting space for a 6pin din connector like this: https://eu.mouser.com/ProductDetail/Kycon/KMDPLX-8S-100?qs=56XnaFOCjrofk105TmWYHg%3D%3D gimbal carier and frame have mounting holes…

Downloads
322
Likes
22
Rating
0
P
Printablesgrizzie17

Gimbal Protectors for Radiomaster TX16S

Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…

Downloads
321
Likes
17
Rating
4

K-9 TVC Gimbal Gen 2

We're happy to introduce K-9 TVC Gimbal Generation 2 into the family! As of 2020, the development of Generation 2 hardware began for an upcoming test campaign! This new TVC Gimbal features many improvements and even a carbon fiber…

Downloads
321
Likes
20
Rating
0
P
Printablesfhuable

Camera Gimbal

Simple camera gimbal for timelapse and stop motion photography, or motion control. Let's you accurately position your camera in two axis or move through a pre-programmed sequence. Home switches make position control repeatable even after…

Downloads
319
Likes
111
Rating
0
P
PrintablesNopileus

Thrustmaster Warthog Joystick sensor holder for bearing gimbal

This part is designed to hold the hall effect sensor in a Thrustmaster Warthog joystick when used with the ball bearing gimbal v2.0 by Psyrg https://www.thingiverse.com/thing:4550666 Please calibrate after installation using Thrustmasters…

Downloads
315
Likes
13
Rating
5
P
Printablesgeeks

Universal Travel Coffee Gimbal - Can Insert (with and without driphole)

Wanted a simple can insert so knocked this up using the original small cup insert. Two versions with and without a drip hole. You could use it for bottles and cans and also the smaller coffee cups. Internal diameter is 73.5mm so there is…

Downloads
315
Likes
61
Rating
5
P
Printablesrodsgear

Jumper T14 transportation cover gimbal protection

Face cover for transportation protection not only for the gimbals but also toggle switches. There are two versions, the first one is intended to be used with the foam that comes in the box and no supports required. Second is a more…

Downloads
305
Likes
10
Rating
5

DJI 2 DOF gimbal for Air Unit camera

This is 2 DOF gimbal for DJI Air Unit very similar to famous “ Motionsic Bad Ass Gimbal ” You will need 2 Savox sh-0257mg servos and set of hardware. Video demonstration on the RC truck:

Downloads
299
Likes
27
Rating
0
P
PrintablesPlomek

Servo camera tilt gimball for Mark4 V2 frame

This is a single-axis servo gimbal designed for the 7/8/9/10inch Mark4 V2 frame. It allows you to tilt your FPV camera up or down and can also provide stabilization during flight. The build uses an ES08MDII servo, though other similar…

Downloads
293
Likes
17
Rating
5
P
Printablescos cos bobo

DJI Mini Gimbal crash bumper

DJI Mini Gimbal crash bumper Created for dji mini 4k aka mini 2 SE, works on mini 1, mini 2, mini 4k.. Tried to make it sturdy and light and this is what came out.I printed it standing upright but you can chose whatever you want. Use…

Downloads
289
Likes
14
Rating
0

Radiomaster zorro gimbal protector

This a Remix of the design of @HandsomePotato The middle part is reinforced

Downloads
287
Likes
15
Rating
5
P
Printablesmbachmeier

Can/Bottle/Cup Insert for Universal Coffee Gimbal

Inspired by the travel coffee holder gimbal from mobiobi , cpenner 's cup insert and NicG s can holder, I remixed this a bit. Made it 100mm deep, with thicker walls for insulation and a drain hole in the bottom (intended used is in a…

Downloads
284
Likes
57
Rating
4.5
P
PrintablesKasuki Kairen

Llavero Digimon - Emblema del valor/ Digimon's Courage emblem Keychain

Llavero inspirado en la serie de animación Digimon, con la posibilidad de imprimirlo completo o por partes para hacer cambios de color para esas impresoras 3D mas básicas. Keychain inspired by the Digimon animation series, with the…

Downloads
281
Likes
48
Rating
5
P
PrintablesThe Next Layer

Quick Release Version of Gimbal Cup Holder

I have added "slide on" holders on my son's stroller to facilitate sliding things on and off, so I remixed the design of the slide on bracket (from https://www.thingiverse.com/thing:4698963/files) + the design of the gimbal cup holder…

Downloads
277
Likes
32
Rating
0
P
Printablessowiszcze

Gimmighoul Coin

A Gimmighoul Coin model for printing as a souvenir.

Downloads
277
Likes
10
Rating
0
P
PrintablesCaleb Kraft

Drink Gimbal - no spill can holder - print in place

Hold your drink without it spilling! This gimbal prints in place, needing only a tiny bit of support for the base. Use support enforcers for that. Print instructions print with the "top" flat on the bed. I used support enforcers to add…

Downloads
271
Likes
52
Rating
0
P
PrintablesMorne

GoPro SteadiCam Gimbal

Thanks to this awesome design from Soul4sale and I changed the handle to accommodate for my use without a Kayak. I will add the handle but you are welcome to change or create you`re own style to fit your need. Ive added a 8cm rod (about…

Downloads
266
Likes
72
Rating
5
P
PrintablesLenny B FPV

!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (normal & AG01)

!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)

Downloads
265
Likes
16
Rating
3
P
PrintablesCrstian

Patamon Digimon

Is just a preview model you can printing with supports Category: Games

Downloads
263
Likes
41
Rating
0
P
PrintablesBacon2002

FPV Gimbal

Gimbal designed for Betaflight / iNav / DIY drones. See - https://youtube.com/shorts/iXlkazI-BYA Updated to include a locking pin so that the pivot and housing lock together more easily. Intended to be light weight and durable, a thrust…

Downloads
262
Likes
32
Rating
1
P
PrintablesLenny B FPV
Downloads
261
Likes
15
Rating
0
P
PrintablesBopChong

Radiomaster Pocket Gimbal Cover

EDIT: I've added a new version with enclosed tops to help stop crumbs and dust. Bonus: Texture :) Remix to accomodate for my sticks - 24mm x 10mm - height increased by 3.5mm and holes increased 2.2mm. Cross-bar widened to allow more space…

Downloads
256
Likes
32
Rating
4.67
P
PrintablesGuyzerr

Spektrum Dx or NX Gimbal Protector

*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** Printed with regular PLA. Print with a raft to support the center column and supports touching build plate. I use them…

Downloads
252
Likes
15
Rating
5
P
PrintablesTomzi1234

DJI remote controller 2 gimbal protector

I downloaded a couple of gimbal protectors, but none of them was really secure. So I designed my own. This stay in place and give almost none space for gimbals to move. You can also secure it with your neck strap. Print Settings Printer:…

Downloads
250
Likes
21
Rating
5
P
PrintablesXShadeTreeX

Locking Ball Joint Gimble

This locking ball joint could be a great option for mounting camera setups and positioning it exactly where you want. I recommend printing with high infill if you plan on mounting with screws, that way there is enough material for the…

Downloads
247
Likes
35
Rating
0
P
PrintablesAerialFox

TPU Gimbal Protector Radiomaster TX15

Might look like the protector from the RM Boxer but is constructructed for the new RM TX15.

Downloads
245
Likes
14
Rating
0
P
PrintablesMickael54

Gâche de galet pour porte en PVC GIMM G1165

Gâche de galet pour remplacer une pièce cassée qui ne se trouve plus dans le commerce. Modèle GIMM G1165. Imprimé en PETG mais serait sans doute plus solide en ABS/ASA.

Downloads
244
Likes
6
Rating
0
P
PrintablesViper Worx

Radiomaster Pocket Gimbal Protector

Remix of https://www.printables.com/model/569384-radiomaster-pocket-gimbal-protection - Designed from the ground up using dimensions taken from the STL in Orca Slicer. Remix features larger Stick holes (10mm) for custom Sticks and a…

Downloads
242
Likes
17
Rating
4.75
P
PrintablesElQuiltro_NERDS

Pokémon Coins - Currency & Gimmighoul

Collectible coins inspired by the designs that debuted in the 9th generation with Pokémon Scarlet & Violet. The Normal Coin was made after the Bag Menu icon, while the Gimmighoul coin was made after the Pokémon GO Item. The TCG design is…

Downloads
242
Likes
15
Rating
0
P
Printablesmft

Modified clamp for 'Universal Travel Coffee Gimbal'

A modified clamp for @mobiobi's 'Universal Travel Coffee Gimbal' - it has a little less bend, so it can can clamp smaller bars before the tip of the clamp contacts. Note that this is about as far as you can go (in terms of straightening…

Downloads
240
Likes
58
Rating
5
P
PrintablesMr4th

Radiomaster TX16S gimbal stick (M4)

Sticks for TX16S M4 (no threads). Good grip for hybrid/pinch style. You are welcome to remix.

Downloads
232
Likes
18
Rating
0