528 models
Steampunk Goggles specifically designed by Double Bass player Stjepan Horvat for band Scifidelity Orchestra ( Facebook , Youtube Channel , Instagram ) with their logo on the side of the goggles. Design for the lenses was inspired by…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Addition for the HDZero Goggles, to add a cold shoe mount via the front rails. Enables you to use cold shoe compatible microphones such as the Rode VideoMicro. There are two files, as the cold shoe mount is rotated 7.5 degrees relative to…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
You can mount until 3x M5 magnet on the back. 1 magnet is enough in the top hole, that's why there are 2 printed feet included in the file (needed for stability). Check the dimensions of you magnet to adapt the size of the feet if needed.
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET
I here by present my Spider-Noir goggles styled after his Spiderverse incarnation. I also included a printable button and web-shooters I used in my cosplay. These are original models created for the use in a costume I used at the…
There are 6 varients, Goggles strap mount / Goggles strap mount easy print & versions with a cable tidy Belt mounts in standard and easy print (slightly wider clip.
DJI Goggles 3 case. I designed this case to house the goggles with the battery pack flipped and nested on the inside of the goggles. The goggles fit snugly in the case and there's no perceivable movement inside the case when shaken.…
After printing the parts, assemble the eyepieces to the bridge with m3 screws and add an elastic strap to the side slots.
Lens protector for DJI Goggles 3 (May also work with Goggles 2 or Integra but I don't know for sure) Printed in TPU with 40% infill.
Tired of walking away from your DJI FPV Goggles with the battery still in your pocket. I made a simple clip that will attach to the headband of the goggles. Depending on how tight of a fit your battery is, there is an additional clip…
I had this great idea to create some accessories for the excellent Dummy 13 model. Well about half way through I realized someone had already beaten me to it (see https://www.printables.com/model/649568-ski-set and…
Update 2022-05-12: Design tweaked for the V3 again after some feedback from folks. Personally tested on both Rapidfire + TBS Fusion modules! Update 2022-04-02: MAJOR DESIGN UPDATE! V3 adapter has been overhauled to successfully fit other…
Goblin gözlüğü. Orjinal gözlüğümü 3D tarayıcı ile taradım. Kapaklar ve gözler arası kordonu sıfırdan tasarladım. İsmimi anmak istemeyen olursa diye “GOBLINWORKS” yazmayan bir çerçeve de ekledim. PETG, ABS ile yazdırmanızı öneririm ama PLA…
This file is the white lens/mesh for the Spider-Man homecoming homemade goggles. This file is fit for these goggles ( https://www.thingiverse.com/thing:2401612 ) but should be easily scalable for any size. If you have any…
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor. Wanted to be able to use it on my radio as the goggles done work with my eyes. Screen attaches with a standard ¼" tread 5/8" machine screw. See the attached…
This is a strap mounted blower to keep the fog out of a pair of airsoft goggles. Dissatisfied with my ExFog unit, I decided to build a small run of an improved design. My main complaints with the ExFog unit I bought were it was too…
Be a hero and print this for your daughter. Skyes pup pack and goggles, easy to print and easy to build. I made this for my daughter. She's 4 years old and about 1,05m. I have used pink fleece for the straps. The model should be easy to…
Zum Verstauen der Goggles 3 in der original Tasche muss der Akku in die Brille auf die Linsen gelegt werden. Die Abdeckung dient zum Schutz der Linsen vor Kratzern und Staub. Gedruckt mit TPU 95.
The upgraded Quad Tube NVG goggles are here. In both multi and single color print files, nothing says your Dummy is ready for the next op than these bad boys riding on their helmet. Flips up and out of the way when not needed, and down…
Case for DJI goggles 3/ integra with dji logo and m3x20 screws for the hinges
Cool and easy to print minion goggles to add that missing touch to your despicable me costume. Printable quite without any support simply by placing the frontal face on the bed the only place where I suggest ading supports in on the slits…
A simple battery holder for goggles V2. Holds very well in place, ultra light If needed, to get better clip, you can warm it into hot water and bend slightly the clip. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
Quick release (keyed-slot) analog module bay for Walksnail Goggles X and DJI V2. Have a look at the awesome original model first. This remix replaces the main body and the “B” mount adapter plate that gets screwed to the back of the main…
There are many battery holders for the DJI goggle 2, but I always had the problem that the weight of the battery caused the strap to press hard on my ears. This additional strap holds the goggles in place and distributes the weight. You…
I wanted to try and keep this fairly easily customizable and quick to print. I used 49mm camera lens filters, and used some EVA foam to pad the nose arch and around the strap for comfort. Anything with a 50mm diameter should fit nicely on…
A quick design for a lens cover for the new Dji Integra Goggles as I could not find any. V2 is a bit wider which allows to have wide open lenses as v1 was a bit short Print in TPU. Category: R/C Vehicles
Just a basic cover to protect the lenses and infrared sensor. Print in TPU with 10-20% infill.
A Great Screen protector for your DJI Digital FPV Goggles. With this model you no longer need to worry about settings your goggles down on a bright and sunny day. Also adds 2 extra slots for Micro SD cards for when you fill up your main…
WAIT! Before printing this model, just know that there is now a removable helmet version available. https://www.printables.com/model/1185916-dummy-13-night-vision-helmet-v2-now-removable This is not my model. Just thought i'd post it here…
The DJI goggles 2 comes with a lens protector, which didn't fit in my goggles after I change the foam to a softer one. I therefore created a simple lens cover that worked well with the new foam on the goggles. It can act as a replacement…
I have lost my case for my swimming goggles. They are the AquaSphere Kayenne, rather big – so your's should fit, too. I designed the case to have really good ventilation, the only things in my bag that could scrape against them are bigger…
This is a replica of the goggles worn by the engineer from Team Fortress 2. They are not using the actual model files from the game, but instead I have recreated myself in CAD using image reference. However, I tried to optimize them for…
I made this lens protection to avoid to damage the lens of the DJI Goggles 3.
Watch: These blinking goggles use a remix of my Print-In-Place Iris Box ( http://www.thingiverse.com/thing:1817180 ) which is a remix of emmett's Preassembled Iris Box ( http://www.thingiverse.com/thing:1811143 ). Right and left…
This is the fantastic Rugged Box by @whity adapted to the HDZero goggles. It includes enough space to accommodate the expansion bay on the side, in theory (I don't have one to test). Also includes an area for cords, antennas, etc. You…
Hook for attaching the strap of a headlamp (such as a Petzl headlamp) or goggles to the Opscore ARC rail of a tactical helmet. Attach one hook on each side of the helmet ARC rail with the hook facing forward, then adjust the strap length…
Night vision goggles for Lucky 13, to make him unstoppable even at night now :) Printed the goggles in 0,4 layer hight. 0,2 layer hight might look way better. Supports are needed, but only “touch buildplate” supports. Added some…
Battery clip to attach the DJI Goggles 2 battery to the headband
To be printed with PLA or TPU.
A small Model you can print, takes around an hour. It will make your workshop more useable and will declutter sinificantly to keep things from lying on the side. Print settings; 0.30mm layer height No supports 5% infill fine Happy Printing!
This model is compatible with the lego system.
A simple protector for the lens of walksnail/fatshark FPV goggle There's second version which is smaller and holds using the lenses themselves instead of the rubber glued next to them. This can potentially avoid people breaking that…
Remember! Eyes are very important and airsofting is dangerous without protection. I use an M3 screw to reinforce these as much as possible but they are still just plastic. I make no guarantee that these will withstand direct impact. If…
Lens cap for goggles 3. I didn't liked that other cap had fixed width, so i designed my own.
Printed in PLA, PETG or ABS.
A HDZero goggle antenna mount for the TrueRC patch antennas. The mount is captive (no adhesive needed). Make sure to add a piece of foam between the backside of the antenna and the goggle front surface to prevent scratches from the solder…
"Don’t anybody move!… I lost my contact lens.” This is the X-Men Cyclops Goggles designed by me for a costume party. They print out nicely in 4 pieces, which I did on my 'Up! Plus 2' 3D printer using the 0.2mm layer thickness. I've added…
Its silly. This works with the insert-empty.stl, make sure to use supports and print with the tip of the nose pointing up.
This is a cover for the Skyzone Steadyview X receiver with screen and jog wheel that fits the HDZero goggles analog module bay. There are two versions, one with fan mount and one without. The Skyzone receiver comes with a fan but none of…
The protective goggles were designed to help medical workers or any other users, who are at risk of getting infected with the SARS-CoV-2 virus that causes the COVID-19 disease. It presents an alternative to face shields. This model…
This is a replacement goggle strap retainer clip for Giro snow helmets. The tab on the left is a little shorter than the tab on the right. When installing the clip onto your helmet, squeeze the bottom of the clip and insert the right side…
Model on pictures is printed with CPE with 0.2 layer height. Recommended printing: 0.2 layer height
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
I downloaded a box, it was just not to my liking, thought I had a good enough reason to learn to design, so I build my first ever box! (woohoo!) I made a few iterations, this one has 3mm thick walls and fits the DJI perfectly.
I made this for my DJI Neo. This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode. The included print profile enabled fuzzy skin which I found…
This is a completely new model for Rapidfire module cover for the HDzero analog module adapter. No breaking tabs an better fit on this one ;-) Hope it works better for you too.
These are hard days for all and for overall, for the sanitary staff in the hospitals, nursing home, clinics, cleaner, and everyone who contributed to minimize the effects of this devastator virus. Today the material used to protect to…
Summary These are goggles I made to cosplay as Tech from Bad Batch. I tried to design these as accurately as I could using the footage from the show as my source material. There are two versions - one in good condition like he wore and…
Heavily inspired by this model by hyperion917 . This model was designed to fit the iFlight 40mm straps. Test printed with PLA at 30% gyroid infill with supports.
I have printed with PETG. Tolerances are very close. If it is a tight fit dont get them stuck tho you do have access to the side to ease pushing out and you can get a fingure nail under the lower part if needed. Not tested with V1 antennas.
This is a set of functional shop goggles designed with a steampunk theme. It hold six lenses per eye in groups of three enabling filters to be used along with magnification, prescription, etc. Print instructions Category: Tools Print…
These are essentially phone VR goggles but designed with a “module bay” for a wifi module for connecting to a phone. I will add more pictures later. Assembled with M2 screws and nuts. Here is what it looks like: Assembly tutorial:
A fairly simple Goggle design put together in OpenSCAD. There are parts for the right and left eyecups to be printed in Bronzefill, for the lids to the boxes on either side of the cups (also Bronzefill) and shims to hide the utter mess…
The mount uses the stock screw holes on the back of the Walksnail VRX, but the screws will need to be replaced with longer ones. The stock screws are a different pitch, but I found that M2's hold in the plastic just fine. This mount is…
This model is compatible with the lego system.
The foldable protective goggles were designed to help medical workers who are at risk of getting infected with the SARS-CoV-2 virus that causes the COVID-19 disease. It presents an alternative to face shields. This model is printed in one…
This is a battery holder for the DJI Goggles2 battery. It has a clip that fits over the part of the strap that returns (the double strap thickness). Works really well. Just shorten the length of the battery cable. The battery is not that…
Welding / Protective goggles for Labubu I sewed on a 6" or so long piece of elastic through the loops to secure on the Labubu head use some plastic packaging and cut some small circles to pop into for lenses ready for action! print with…
Ideally printed in PLA and moulded to the casing (heating the part with a blow dryer before). Mirror part to suitable for both sides of the headset.
buymeacoffee.com/dgfpv this is meant to be printed in tpu. The nose on the back should be pushed in the infrared sensor between the lenses.
21700 version of my minimalistic fpv battery case design ( https://www.thingiverse.com/thing:2828955 ) Currently designed for wider, 35mm head straps, but I think it would work with regular 25mm straps just fine. To get the cap onto wires…
Hardware needed: 4x 6x3mm Magnets CA-Glue This Design utilizes 2 filament hinges. Be sure to print the test print and insert a piece of filament first to check if your printers tolerances work for this print. To assemble slide the lid…
After creating my first glasses stand , I tried now a low poly version with improved, more realistic, form factor. Inspired by a stand which I saw weeks ago created in wood. Printing I printed it using supports by setting…
This is a remix of another DJI Avata battery holder to add in the lid at on one end to stop battery from sliding. Also resize it so it will fit the new Goggle 2 battery 0.2 Layer Height PLA Support needed for the cable holder, orient the…
A simple tactical helmet that will fit onto a cat's noggin. I have included night vision goggles, a stand, and two versions of the helmet (with and without picatinny rails). It also has slots for a chin strap (but please don't strap this…
DJI Goggles 2 Battery Holder PLA Support Yes
An exhaust manifold that slips in behind the top edge of your goggles, no gluing or hole punching required. TPU recommended for safety reasons. Print with supports and exhaust hole touching bed. Route both tubes from the back of your…
For a friend's birthday i wanted to build some ecto-goggles, because he is a big fan of Ghostbusters. I found some welding goggles at our hardwarestore and remembered some pictures of some DIY-Ectogoggles based on this model. You can find…
when you insert the inner strap loop through the goggles loop, you'll need to fold the little tab at the bottom and squeeze it through the goggles loop.
We have two Anon helmets, they are pretty good, but the goggles clips from this model don't come with the screw or anything else that keeps them in place. So after a couple of seasons, we ended up losing both. Since Anon was purchased by…
UPDATE: Added for rapidfire and eachine pro58. I didn't like the few covers I found for tbs fusion and none of them fit correctly either they didn't catch the notch correctly or broke off making the cover loose or fall off. So I created…
I made this so I could have my FPV goggle battery in my pocket to take the weight off my face while flying. Things you will need: 3x High Capacity 18650's (I used 3 NCR18650B's) 3s balance lead xt60 Male for battery, and female for cable…
A cover for the hdzero goggle analog module bay to fit the steadyview module from skyzone
I reuploaded the models to printables since most people are using printables or thingiverse. All credits to CaddxFPV and Walksnail
This cover was tested on next list of parts: Receiver - NEW Diversity Receiver Built-in Low Power Buzzer with Two RX Modules For FPV Fatshark Goggles ( aliexpress ) Port - URUAV 5.8G RX PORT ( aliexpress ) Box - Receiver Module Mount…
I changed some dimensions from @Jody_T 's design to get more stable mount for GoPro 8 for VForce Paintball goggles. Also included place for nut in order to secure camera to the mount. You need to put M5 nut in the hole, which is tight…
added the Logo to the protection and shortened the protection by 2.5mm to make it a bit looser fit. probs to NordFPV for the design. https://www.printables.com/model/244448-walksnail-fpv-goggle-protector
I really love the original design by Drip, especially the minimalistic design, but I personally want my 18650s to be protected slightly better. Thanks @Drip, big fan of your channel! So this is pretty much the same design, just a bit…
I like @Eleton's minimalistic approach, but the loops for the goggle's strap were too tight. So I made them 3 mm longer. Printing TPU, 100 % infill, see 3mf file attached for details.
Print the first 2 layers with TPU and the rest with ABS/PLA/PETG The “REMOVE BEFORE FLIGHT” was printed using Brother Label Maker 12mm tape ½ Width setting. Category: R/C Vehicles
Winter is coming... there may be snow! But now you are ready. Print these old school inuit goggles to handle all the bad sun rays when in the wild to prevent snow blindness. :-P There are openings to put through a rubberband. The whole…
so my snorkel to goggle strap clip broke(got old and brittle), made this to replace it, inner diameter of hole is 25mm so it'll work with a snorkel that has a outer diameter of 25mm. Adjust model to suit your needs. Printed in PLA, will…
fixed missing bridge connector. 38 of you probably should redownload the eyepiece. Requires: 2x M4x20-25mm Screws 28x M2x (6 + glass thickness) mm Screws Plastic, Plexiglass, or your favorite thin transparent material (that you can shape,…
I use this Boxes for my swimming goggles.
Added a 0.2mm layer covering the eye. This is done entirely in Orca slicer. Set top and bottom layers to 0 for the mesh part only, and play with grid infill percentage for desired effect. Reduce sparse infill line width to 0.4mm on a…
Fatstrap adaptor for the G2, with slight relocation of the centre of the strap mount. Print in TPU
I find the default fit on the Walksnail goggles X very uncomfortable – they press on my nose. Theses shims will tilt the goggles up a notch, making them very comfortable to wear, with no light leak. I installed them by applying sticky…
![DJI Goggles 2 Battery Strap Mount remix [TPU]](https://media.printables.com/media/prints/656002/images/5171017_25828a99-ebd7-4986-9e0b-fb6dfbe59805_3410f5e7-0e2a-45c6-bafd-a80f3e969207/dji_goggles2_batteryholder_20231122_192011401_hdr.jpg)
