469 models
This compact and efficient cleaning nozzle (drain jetting nozzle) is designed for use with standard Gardena connectors. Perfect for cleaning gutters, channels and narrow drains. Fair word of warning: don't plug on a hose and turn on the…
Cleaning your rain gutter can be difficult if your ladder is too short to reach the roof. Therefore I created a little scoop (or shovel) that can be mounted on a (telescopic) Gardena stick. The angle can be changed in two directions…
Easy and fast printed hooks for rain gutters, to hang christmas light in. I was tired of hanging Christmas lights on the gutter with strips, so I had to design some hooks so it was much easier. Printed them in ASA-X, since they had to…
Introducing the Milwaukee Leaf Blower Gutter Cleaning Attachment, your ultimate solution for maintaining clean gutters without the need to climb onto your roof. This innovative printable file is designed to make gutter maintenance easier…
** Updated April, 2022 All of the code/files are contained within GitHub - GutterDrainGrate I would recommend either pulling via git: ```shell git clone https://github.com/jshessen/GutterDrainGrate.git ``` or downloading the repo as a zip…
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Spent my last weekend cleaning out my eavestrough, Dirty and annoying job. I decided I needed some gutter guards, and designed these in Freecad. Simple design and pressure fitting on standard-sized eavestroughs. Printed at .28 layer…
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
Christmas lights and ornament clips for rain gutter. ASA would be most ideal material but PETG will work just fine for one season. ASA may be able to last a few seasons depending where you live. So Cal is hot and dry (yes hot winters…
This is a remix of my own sieve for the downpipe of the rain gutter: https://www.printables.com/de/model/578245-gutter-sieve-leave-catcher-d78mm-regenrinnensieb It fits a gutter with an inside width of about 120mm (130 or 140mm should…
Very sturdy sieve. You have to measure your rain gutter drain hole and scale the model accordingly. At my house every drain hole is different because they are handcrafted. Measure the hole crosswise! The model has a circle with 90mm. The…
Remix of the model from: https://www.thingiverse.com/thing:5222403 (Thanks to grv107 ) Made a shorter and less sharp version and added one additional support. Printed in PLA
A gutter cleaning tool. Goes on the end of a painters pole thanks to the threads by Halley ( https://www.thingiverse.com/thing:84774 ) I printed it in PETG, and it seems rather robust. :D
I needed a clip that fit my gutters which had a folded channel on the inner lip. It will also fit on a plain flat surface. It has a strong holding force even on a flat surface, and clips extremely well on my gutters. Could be used on a…
UPADTE: this is a WAY MORE accurate version and fits as it should vs the old model I uploaded , so give it a shot and tweak with it if you want to! lol I did my best to copy the kind that's sold on amazon but I guess it can be a start for…
a simple hook that can hold lights hooked onto a gutter.
Part numbers: DBC101690, AWR6711, DBC101680, AWR6712 --------------------------------------------------------------------------------------------------------------- On thingiverse is similiar model, but without locking hook. I had done…
Collect rain water from your greenhouse gutters using this hose connector and blind plug! Both parts are provided as left and right variants, so they fit both sides of the greenhouse. Requirements The gutter must be 38 mm wide and 21 mm…
I modeled this attachment for my Ego blower to clean out the roof gutters while standing on the ground. It has a flat surface for the build plate. I printed this without any supports. It is 219mm tall. This nozzle points to the left, but…
This is a gutter cleaning attachment designed for use on Ego Power+ leaf blower. it has a profile that closely matches the stock tip, just with a 180 degree bend in it. Print Settings Printer: Monoprice Maker Select V2 Rafts: No Supports:…
Přepadová redukce na okap pro IBC nádrž. Redukce jde celkem za levno koupit, ale většina má malý nátrubek. Moje je vhodná pro okapy s průměrem okolo 100mm a nátrubek má vnější průměr 70mm, což je vhodné pro odpadní trubky. Jsou přiložena…
Gutter feed pipe end piece compatible with Marley gutters. 150 and 125 mm gutter size. Entstück-Stutzen für Dachrinne, Marley-Kompatibel. 150 und 125 mm Dachrinnen-Größe. Printed in PETG (with supports on the build plate), sanded a little…
This is a very simple downspout, but it works well. It sits up high enough that you can mow underneath it. The vanes disperse the water out, which keeps your lawn from eroding away. It doesn't kick water very far away from your…
I live in Tampa, FL, and Hurricane Ian is about to rock us.. well.. Like a Hurricane. To deal with the deluge of water I made a tapered adapter to take the 4x3in downspout to a 3in flexible backwash hose for a pool (exact one here…
Works great with gutters with a rounded edge. I used about 1 per meter/yard to hang the lighting. Fit around 30 at the time on a 230x230mm print bed.
I was inspired to make this 3d model by this video by Dr. Kratky . Designed to be used in a 3" deep gutter/downspout system. *this is just a little test section for a larger row, it was a coincidence I printed an endcap in translucent…
Cleaning out gutters is a miserable, messy, stinky job. Installing gutter guards could put that headache behind you. Print instructions ASA is an ideal material for outdoor usage.
I used the dragon from: http://www.123dapp.com/creature/Gargoyle-Dragon/3355535 and BLENDER for cutting out the pipe. Two versions: for 50mm and 40 mm pipes Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: Yes…
This is a minimalistic and effective gutter hook. I did not find any other model that fitted quite right, were using hours to print, or could be tuned, so I quickly made one in OpenSCAD. The ones shown on the picture are printed using…
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Designed this to move and/or flick leaves out of my gutters. In particular it is good for moving leaves away from the gutter down spout to stop water overflowing the gutters. You are working blind with this tool so it is definitely not a…
This is an add-on set of Railings and Rain Gutters for the 1/60th scale Mobile Launch Platform MLP/LUT model. These are installed on Level 0 around the parameter of the deck. Glue the railings to the outside edge of the top decking.
These are $20 bucks on amazon but why buy when you can print! Extended downspouts to reduce water pouring on to your trailer when it is raining because the original spouts are too short. Also reduces black marks under the downspouts. 20mm…
Printed in PETG and stuck on using silicone sealant.
4" by 3" gutter downspouts from Lowes are great if you're looking for hydroponic nutrient film technique (NFT) growing channels. However, it comes with the challenge of closing off one of the ends. This is my solution. A very simple end…
Rain water collector diverter allows you to choose whether you want to send water to the tank or to the sewer Print in White PETG for 80 mm tube (2 screews 4x40 to fix handle) Optimized print profiles for Bambu Lab printers available…
Update: New enclosed remix with added lid and less supports The print i did in PLA held up well since some month. Going to print a PETG one next year. It might friction stick in between the ends of the aluminum gutter of pictured…
Attaching the WS2811 ‘bullet’-style RGB LEDs to your rain gutters can be a pain. I tried using the ‘universal’ gutter clips from the home improvement store that are sold around Christmas time. They didn't last, didn't hold, and were so…
Working on this for my greenhouse. Still a work in progress. If you print it, give me feedback, its my first custom file
Print without supports. PETG recomended…. Updatede: slightly increased the size to make the print fit better
Last year, I tried the “gutter hooks” listed on Amazon. Those seem like they'll work until you get up there and see how gutters are actually designed. Gutters don't have a vertical lip as you would imagine. Instead, they're horizontal.…
I had issues with some store bought hooks that were very tight and didn't survive well being exposed to UV. I designed these to be printed with PETG for UV resistance, and to be simple to put in place while balancing on a ladder. They've…
Two different gutter cleaning tools designed for small metal gutters. One is used to push or pull debris in the gutter. The other has a hook for pulling debris through a gutter hanger obstacle. The internal threads fit a painter's pole…
Gutter cleaning tools to match the gutters found in Australia. These are the lysaght profiles as found here: https://professionals.lysaght.com/product-applications/guttering-fascia-rainwater-goods Print with PETG or some other robust…
I printed these at about 900g of Petg each. Not the cheapest but indestructible. Maybe you can get away with scaling down or reducing infill to help. Survived very well outdoors with daily use.
Endcap for 2x3 inch rain gutter for use in hydroponics nutrient film technique
Since the original fittings didn't fit my tool shed, I had to design my own for 3D printing (an additional advantage is that it turns out much cheaper, as the gutter brackets make up most of the set's cost. I recommend purchasing the…
Mounting band/clip for 2 x 3 inch gutter downspouts. Pretty self explanatory to print and use. No supports needed. I made these because I could not get anything similar in the color I wanted… only white :-( I also really hate the look of…
Rectangular Gutter Cover for a common application in wet room drainholes (DE:Abflussrost) Untested first iteration of a parametric design. As si the lid has 142mm square dimension and the seat area tapers down from 136mm square at the…
Enclosed version of my Gardena Gutter Adapter Water Collector. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the adapter off when moved. Print slowly…
These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever. Split into objects, flip them on their backs…
Print standing vertically, Coat with a clear Just glue on your trim and push it on Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 10% Filament: eSun PLA+…
Needed a few more Gutter Hocks / Clips to support strings of Christmas lights. Design is a copy of what seems to be the UK standard clip for most cheap name brand Christmas light strings. Printed in white PETG PLA should also work fine…
Modelled from a retail design that works well with my own gutters. In print settings use 4 perimeter shells — see screenshot (print settings/vertical shells - Slic3r) Recommended print material: PETG (Less likely to snap in cold…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! These clips fit my “generic” 7 inch aluminum rain gutters in California. Lot's of gutters out there, these have a 16mm lip on…
I have 30 year old plastic rain gutters on my house. I believe I got them at Home Depot. But they don't carry them anymore. I've had a couple of the end caps break. I made this model as a replacement (the original Genova was PN RW-102). I…
No supports are required. Use a brim to ensure adhesion of the thin contact profile of the design.
This bracket will keep the end of your rain gutter supported off the ground. It is sized for 2"x3" (nominal) downspout, a common residential size in North America. The actual inner width is 83mm. The bracket is designed to support the…
Simple hook to hang christmas lights along gutters. It is compatible with Marley plastic gutters, but may fit to others also. Hook is easy to install and remove.
So the whole idea here was to, rather than have the gutter just be cut and dump all the time into the rain barrel, instead to give me the option to have the water go one way or the other. I fugred a simple flipper flapper doo dad would be…
Clip for simple attachment for xmas lights etc to gutter rails. The models are best printed in PETG, to give a little springing effect. Fits gutter with approx 16mm round edge, that is the most common size in scandivania
Needed to replace downspouts on RV gutters after winter
Endcap for 2x3 inch rain gutter for use in hydroponics nutrient film technique
The hardware store I started at had gutters, but only 3x4 downspouts. The second store had the 2x3 downspouts I wanted, but only these mid sized outlets. This adapter makes them work together. Parametric, so maybe it can work for you.
As fall is around the corner and rain expected, you should think about a maintenance of your rain gutter (rain drain). This tool (fitting Ø150mm) can help you prevent overflooding your drain gutter respectively your drive way or whatever…
Mirror piece as needed Seems to be a French specific gutter profile
It is designed to be printed very easy. Printed mine in ASA, because of the outdoor properties. 0.2-0.3 Layer height is fine and no need for supports. They are mounted a year and still look like the freshly printed. (Prusament ASA 🔥)
the inlet has a staged arrangements to allow for multiple sizes of leaf blower to be attached, however it will need to be secured to the leafblower using duct tape to stop it blowing off when in use the exit nozzle is placed at an angle…
Použito na svod okapu. Used for gutter downspouts.
Simple clip that attaches to the lip of any gutter and holds Christmas lights. Printed with Taulman3d Alloy 910 Filament 100% infill
45° or 60° Gutter Bend (pipe fittings) - pipe diameter 63mm (gutter system - 75mm). Print Settings Printer Brand: Biqu Printer: Biqu BX **Rafts:** No Supports: No **Infill:** no Filament: Fiberlogy PET brown Category: Outdoor & Garden
It fits 80mm zinc gutter (popular in France), but you can easily adjust the size as you'll find the Fusion360 file included. The outlet pipe fits inside a 32mm PVC tube (inner hole 27mm). Print with PETG or better (PLA works but after few…
Print out a bunch of these (6" at a time) to cover your 4" wide trench/gutter outdoor drain
Fast printing gutter clips. Designed to be as small as possible and holds the lights wire very snug requiring fewer of them. You'll need good print bed adhesion to print these. I print at .28 layer height and they take under 3 minutes a…
Customize a simple gutter for your shed with bitumen roofing. Choose from 10cm, 20cm and 25cm long gutter rails to fit your roof length. End-caps and drain-caps for both mounting orientations are provided The bitumen felt self-glues to…
Green house rainwater gutter adapter/replacement for an old green house. The 2nd photo shows one original part on the left which was not totally cracked (I guess because not always in full sun) The old ABS(?) part was eroded over the…
Only those who have played Kenshi will know the terror these things will bring to my table top group
Please look at the newer version: https://www.printables.com/de/model/859040-gutter-sieve-leave-catcher-d78mm-version-3 This is a simple Gutter sieve / Leaf catcher for my gutter downpipe. It fits a gutter with an inside width of about…
This is a 3D design of a greenhouse gutter water outlet.
Gutter clips for old W Australian profile, printed from ABS due to high heat range in WA in summer, but other materials can be used eg PETG or even PLA. Printed at 0.2 layer height with no infill just increased wall perimeters for…
A remix of the gutter clip that holds the ws2811 leds vertically on the front of the gutter.
I had the problem that the gutter stopper we bought was much too simple and let a lot of small leaves through. This meant that our rain collector kept getting clogged and I had to remove and clean it. When I was thinking about how I could…
This is my take on a rain water collector. It's been in use for 2 weeks now and works just fine. The 3mf and gcode files here are for a 100mm pipe with a 54mm hole in the side and a hose with 33mm diameter. The FreeCAD model is adjustable…
The bracket installs below the gutter - use the included drill template and qty 3-6 (3 should be adequate) M5 screws with washers and nuts (and preferably lock washers as well). The modular coupling can be used by itself or joined to…
This is a adapter nozzle for the Milwaukee M18 FUEL Blower (3017-20) that allows you to attach the Sealegend Gutter Cleaning Attachment Kit Compatible with EGO leaf blowers https://www.amazon.com/gp/product/B0CWRKSYLP/. That kit is…
The original never was sealing enought, were not stable to keep the gutters “in line” and had a step inside - doesnt make me happy. So I designed that one, for using a 2mm foam rubber (available self adhesive in diverent versions) as…
I designed this to fit on the end of a piece of conduit that I had lying around for use in cleaning out gutters. Or maybe you need a giant-size back scratcher. You could scale it a little to fit whatever pole that you plan on using. It is…
A friend, who is a classic cars aficionado, asked me to recreate the missing gutter caps of his beloved Saab 900. Print Settings Supports: Yes Category: Automotive
I had the best results with TPU. It is designed to be printed threads up without the need for supports. For my prints, I used the default print settings for the print, but made the neck with the threads solid. I used .2 print height and…
It is a first generation of gutter hooks for Christmas lights. It is designed to fit K-style gutters, which are common in the USA. I could not find something similar in the local store and didn't want to wait and pay extra for online…
Cover for rain gutter downspouts. Fits 2x3, 3x3, and 3x4 (parametric) down spouts with wire mesh cover to keep rodents out. I had a problem with mice and chipmunks getting into my downspouts. This cover keeps them out an looks fairly…
EN: The plug for rain gutters of the Israeli PALRAM Multiline 6x8 greenhouse. Printed from PETG "flat" with supports. Greenhouse has rain gutters along the longer sides with outlet on all 4 corners. I joined 2 corner outlets together with…
I made this for a mold I needed for work. It is pretty basic, but I could not find one. It will need supports and printed in something that can exposed to weather. You will also need to slice it to fit your printer.
I made a filter for my roof gutter to avoid any leafs to go inside. The hole in the center is used to put a screw and lock the filter in the roof gutter. The shape of the base allows having enough flexibility to be inside a hole between…
This model is dimensionally very similar to the kit provided by Scouts BSA. Recommend printing with 4 perimeters to keep water out and 5-10% lightning infill to keep it lightweight. Additional materials required: 2x Wooden dowels for…
A "T" junction for a gutter downspout. The attached STL should be reasonably sized for standard 3x2" gutters, although I encourage measuring your downspouts for appropriate fit. This print is customizable, and should adjust reasonably to…
I printed it with: Material: PETG Nozzle: 0.6mm Layer height: 0,3mm Walls: 3 (alternate extra wall) Infill: 30% Support: Tree support Top Z distance: 0.2mm to make it easy to remove STL and Fusion 360 files provided.
This has been designed to turn a length of Floplast 115mm HI-Cap gutter into hanging planter for something like lettuce. The end cap is printed with no top and bottom layers with honeycomb infill at 15% to get the lattice on the end for…
Install inline in downspout to harvest rain water for use in gardening or filling water bucket for animals to drink. Two models, depending on hose size. ½" tubing or 5/8" garden hose slip onto tap. Made with PETG. 15% infill, supports…
I designed a basket for a gutter settler because I lost mine during construction. Following the pattern of the original basket, I made an exact copy, which was unfortunately too delicate after printing. I decided to convert the basket…
