Search results: gyroscope

Sort order

120 models

P
PrintablesJeepingJohnny

Extruder Gyroscope, Print in place with press fit magnets.

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
1,360
Likes
336
Rating
4.97
P
Printablesschuetzi99

spinning top / gyroscope, three-part, can be assembled without gluing

This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
21
Rating
4
P

MK3S Spinning Gyroscope

Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports

Downloads
6,230
Likes
690
Rating
4.93
P
PrintablesDavid S

Gyroscope Fidget

This is a fidget gyroscope. It spins and doesn't have any pins so you can rotate it in any orientation Notes: The proportions change as the number of rings increases. The smaller the number of rings, the smaller (in height) I made the…

Downloads
4,799
Likes
324
Rating
4.5
P
PrintablesEli Fastow

Gyroscope Fidget Keychain

This simple gyroscope fidget prints in about 45min and spins remarkably freely. I usually carry several of these to give away as gifts, and they are some of my most popular prints

Downloads
2,445
Likes
348
Rating
4.91
P
Printablesdona97m

MEMS Gyroscope

MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…

Downloads
1,984
Likes
390
Rating
4.93
P
PrintablesLoboCNC

Gyroman 4: Walking Gyroscope

This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…

Downloads
1,760
Likes
1,467
Rating
4.82
P
PrintablesKeyboardCrawlin

Fidget Gyroscope Rotating Rings

These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…

Downloads
1,485
Likes
203
Rating
4.89
P
PrintablesEndless

Print in Place SQUARE Gyroscope Fidget

A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.

Downloads
1,335
Likes
166
Rating
4
P
PrintablesEndless

Print in Place Gyroscope Fidget

A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.

Downloads
1,331
Likes
138
Rating
4.5

Ultimate fidget toy - bearing, gyroscope and gear all in one.

Have you ever thought of combining a bearing, a gyroscope and a gear fidget toy? Probably not, but here it is, and it is a true adventure for both your fingers and your drifting mind. It is easy to print and assemble, and it needs no…

Downloads
926
Likes
123
Rating
4.83
P
PrintablesStengel99

Music Note Fidget Gyroscope

A fun little fidget toy gyroscope with each layer showing whole notes, half notes, quarter notes, and eighth notes. I had hoped to use more authentic looking music note graphics, but they involved too many overhangs that would have…

Downloads
925
Likes
126
Rating
4.63
P
PrintablesTHop3D

Print in Place: Gyroscope Fidget toy (keychain)

Gyroscope Fidget toy (keychain) Keychain with ring or without. Printable at the size you prefer. If anyone has any questions please contact me, THop3D

Downloads
777
Likes
73
Rating
5
P
Printablesgary niu

Gyroscope Fidget Toy (Print in Place)

A small gyroscope fidget toy Print flat, on its side, recommended to use either no adhesion or raft , do NOT use brim! Mines was printed with 0.15 layer heights, 3 walls thick Should take around 30 minutes to print

Downloads
605
Likes
50
Rating
5
P
PrintablesSuperprinter

Gyroscope

When you take it off it might not be spinning so easily. So just keep playing with it and it’ll spin.I have also made a 5 ring gyroscope https://www.printables.com/model/605104-5-ring-gyroscope-smooth-spinning

Downloads
594
Likes
23
Rating
5
P
Printables3DCreat3d

Rotating heart (single axis gyroscope)

A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too. Print instructions Highly recommended to print this with a raft as any elephants foot on the…

Downloads
577
Likes
50
Rating
5

Gyroscope Fidget spinner toy - Fidget Spinner

An elegant and original spiral fidget spinner 3D printed for stress relief! This innovative toy features a spiral structure that spins smoothly around its axis. Perfect for relaxation, focus, and keeping your hands busy, it’s ideal for…

Downloads
529
Likes
26
Rating
4.75
P
PrintablesIvanGirderboot

3D Gyroscope Keychain

This is a simple little gyroscopic keychain I designed in Fusion 360 following the Product Design Online tutorial as a guide. I took it a step further and set it up as a multi-color MMU print.

Downloads
516
Likes
67
Rating
5
P
PrintablesMAKERTEAM®

VOLKSWAGEN VW Fidget Gyroscope Keychain Spinner (Print-In-Place)

Nice little print in place (PIP) keychain fidget toy for all VOLKSWAGEN fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%

Downloads
489
Likes
55
Rating
0
P
PrintablesAlexsky1

Large Gyroscope with Stand

I scaled the original model and created a stand for it. All axis points are smooth and able to rotate freely.

Downloads
450
Likes
103
Rating
4.5
P
PrintablesWhateverPrints

Gyroscope Beer / Soda Can Holder

It uses 18mm M4 screws and 7mm M4 nuts. I recommend to use nyloc nuts for the outer ring. There are different attachment options, see the original for more details. I added a custom rod which lets me insert the holder into my bicycle…

Downloads
421
Likes
100
Rating
5
P
PrintablesByer

Gyroscope Fidget

New to the 3D printing world and design. I was inspired by others who designed similar fidgets. So i took on the task to design one and test myself. This is what i ended up with. This print is very large and measures 105mm X 46mm and will…

Downloads
403
Likes
37
Rating
5
P
PrintablesSuperprinter

5 Ring Gyroscope (smooth spinning)

A awesome stressing toy and smooth spinning rings.

Downloads
397
Likes
30
Rating
4
P
PrintablesBogomips

Gyroscope puzzle

I made this gyroscope looking puzzle to enter the Brain Teaser Puzzles contest. You can play with the dimensions (parametric table) but be careful with the width on small diameters because the “key” can be blocked and the puzzle unable to…

Downloads
342
Likes
38
Rating
4.6
P
PrintablesDaHouzKat

Gyroscope for x-axis

Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…

Downloads
332
Likes
73
Rating
4.86
P
PrintablesMAKERTEAM®

BATMAN Fidget Gyroscope Keychain Spinner (Print-In-Place)

Nice little print in place (PIP) keychain fidget toy for all BATMAN fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%

Downloads
331
Likes
40
Rating
0
P
PrintablesStudio 42

MK3S Zip Tie Spinning Gyroscope

Remixed the remix of another remix ;) I liked the original model a lot, but it got loose and boiled randomly. So I decided to make my own version including a rail to pass a zip tie arround it. Now it doesn't move at all and it's really…

Downloads
291
Likes
39
Rating
5
P
PrintablesJose Cruz

MK4 Gyroscope

Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.

Downloads
279
Likes
57
Rating
4.75
P
PrintablesDaHouzKat

PRUSA MINI/MK3 Gyroscope and/or Optical Illusion

This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…

Downloads
277
Likes
118
Rating
5
P
Printablesmorfaber78

Fidget Toys - Fingertip Gyroscope

Gioco progettato per il concorso di design Fidget Toys Stampa sul posto Piedistalli con doppia funzione, per appoggiarlo sulla scrivania e per tenerlo fermo mentre si gioca Cornice esterna con piedistalli, tre cerchi e una sfera centrale.…

Downloads
250
Likes
50
Rating
5
P
PrintablesStacker55

Mini+ Z Axis Visualizer Gyroscope (No Magnet)

Made for my Mini+. I found that magnets want to stick to the edges of the opening instead of the spinning part in the middle. I noticed the top of my Z axis rod had a small 2mm hole in the center of it so I modified this to press into…

Downloads
244
Likes
36
Rating
4.69
P
PrintablesDaHouzKat

Gyroscope and/or Optical illusion for x-axis

This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…

Downloads
236
Likes
51
Rating
5
P
PrintablesAnna

gyroscope coaster

large gyroscope coaster 3mm height Update 08-12-2023: added 5mm version that is more stable and doesn't fall apart as easily

Downloads
210
Likes
28
Rating
4.8
P
PrintablesHex2000

Human Gyroscope Extruder Indicator (2x sizes)

Human Gyroscope Extruder Indicator (2x sizes) A fun way to see if your extruder is feeding filament through to the printing model. The largest extruder indicator model I know of. To make the gyroscope run freely as possible you need the…

Downloads
199
Likes
26
Rating
3
P
PrintablesMatt Thibs

Spinning Gyroscope Throwing Toy: Easy Print

Print in PETG rather than PLA. When throwing this around and banging into things, the softness from PETG is less likely to break. Or print the file without wave in TPU. Print at any layer height. Set infill to 100%. Set seem location to…

Downloads
191
Likes
23
Rating
4.5
P
PrintablesMAKERTEAM®

CAPTAIN AMERICA Fidget Gyroscope Keychain Spinner (Print-In-Place)

Nice little print in place (PIP) keychain fidget toy for all CAPTAIN AMERICA fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%

Downloads
189
Likes
33
Rating
0
P

MEMS Gyroscope Credit Card Size

I love the original MEMS gyro, but it wasn't the right size of a wallet. Plus I found that the 0.5mm thin wall joints of vertical joints to be hard to print without gaps. So I used the 1mm joints throughout. Additionally I scaled it down…

Downloads
141
Likes
22
Rating
5

Spinning top gyroscope thing

This has been conveniently split into 2 for easy printing, so you just print both halves and glue them together, if youve got no glue then you can try and use 5mm pieces of 1.75mm filament in the holes which I put in there to hold it…

Downloads
133
Likes
18
Rating
5
P
PrintablesJan

Impossible "!" gyroscope

Saw this a while ago in Poland, and created a replica, but accidentally lost it. Decided to now load it up here on Printables.com. Maby I will print it soon again so i can upload a picture of it while it is action…

Downloads
118
Likes
16
Rating
5
P
PrintablesGabani

Letter Z Gyroscope/Toy Keychain

Print in place fidget toy with free movement. Stress relief keychains, really fun to play with!

Downloads
118
Likes
10
Rating
5
P
PrintablesManufactorum_3D

Soporte para latas giroscopio (Gyroscope can holder)

3D Printed Can Holder. Perfect for keeping your drinks safe and handy anywhere. Thanks to its gyroscopic design, your can will never fall over again!🍻✨ Ideal for the beach, the mountains, or the pool. Enjoy the summer without worries!🌴☀…

Downloads
116
Likes
18
Rating
0
P
PrintablesSitRepPope

Mk3s Davinci Gyroscope

Remix of https://www.prusaprinters.org/prints/2561 I wanted to add a little touch of Davinci

Downloads
104
Likes
15
Rating
0
P
PrintablesBlake Unsell

Gyroscope

PLEASE read entire discription before printing This is a gyroscope that I designed myself. This is super fun to play with, while also demonstrating some cool physics principles. PRINTING AND ASSEMBLE: Printing is pretty straightforward.…

Downloads
97
Likes
10
Rating
5
P
PrintablesMAKERTEAM®

CAPTAIN FUTURE Fidget Gyroscope Keychain Spinner (Print-In-Place)

Nice little print in place (PIP) keychain fidget toy for all CAPTAIN FUTURE fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%

Downloads
97
Likes
11
Rating
5
P
PrintablesJoseph Schmidt

Ender 3 Spinning Gyroscope Extruder Visualizer

Here is a remix of "MK3S Spinning Gyroscope" created by Franklin Samuels. This one is an addapatation to be used on a standard extruder motor on an ender 3. I couldn't find one so i quickly made one. It's a tight fit, maybe try to scale…

Downloads
96
Likes
14
Rating
0
P

Woodstock in MK3S Spinning Gyroscope as Test Pilot

I am not sure if this is worth a remix, but since I can not upload a .stl file to a comment, I made one. I just used the Woodstock figure from https://www.thingiverse.com/thing:2463449/files - thanks to the creator, Misterdid. I copied…

Downloads
95
Likes
11
Rating
0
P
Printablesacmeman

Gyroscope Fidget Rings

The fidget in the stl file consists of 7 concentric rings that can move in any direction. The idea of the design, implemented in FreeCad, originated from https://www.instructables.com/Gyroscopic-Fidget-Rings/ . The FreeCad design is fully…

Downloads
90
Likes
8
Rating
5
P
PrintablesDizzyDawn

Gyroscope Fidget Keychain - Increased Center Clearance

This let me print this model with a 0.4 nozzle and rotate the center gyroid. If you are still having trouble, try increasing the Z offset, and/or printing with “Slicing Tolerance” set to “Exclusive.” Model edited in Blender. Sliced in…

Downloads
90
Likes
8
Rating
5
P
PrintablesyukiLo_3d

Gyroscope Fidget Toy

Note: This model is designed to print completely in place with zero supports needed! Make sure your first layer is properly calibrated so the concentric rings don't fuse together. Print Settings & Recommendations Layer Height: 0.2mm or…

Downloads
87
Likes
14
Rating
0
P
PrintablesLarry Guo

Classic Gyroscope

Classic gyroscope toy. Cannot be printed in PLA or it will be impossible to assemble due to rigidity of PLA. PETG preferred. Designed in F360 Source: http://a360.co/2oJmZRo Non printed parts: Uses CAD or USD pennies for mass. The cavities…

Downloads
82
Likes
24
Rating
0
P
PrintablesVin

Gyroscope Cup/Mug Holder

The design is intended to hold a cup or mug and prevent spilling. Good for those with deteriorating motor skills or kids

Downloads
77
Likes
15
Rating
0
P
PrintablesLexie The Furry

Print in place Hexagon Gyroscope

its a hexagonal gyroscope and it go speeeen printing note: -you can disassemble it if you squeeze the sides but be gentle please begging sounds -on smaller scales the pegs might flatten -why wont italics go away *sadness *

Downloads
75
Likes
9
Rating
0
P
PrintablesAngelim

Giroscópio com base (gyroscope with base)

Giroscópio com base de suporte 100% funcional

Downloads
74
Likes
6
Rating
0
P
PrintablesOndrej

Fidget_gyroscope

This is fidget gyroscope. Fidget gyroscope is anti-stress toy. It is easy to print. I print this in multi color print. Take photo of your fidget gyroscope on Instagram with hashtag: #fidget gyroscope Print Settings Printer Brand: Prusa…

Downloads
74
Likes
10
Rating
0
P
PrintablesQris

Volkswagen Logo Keychain - 3D Gyroscope Design

This Volkswagen Logo Keychain is a stylish and innovative accessory for any fan of the iconic car brand. The 3D printable keychain features a unique gyroscope-inspired design, with the logo enclosed within a spherical structure. The two…

Downloads
73
Likes
6
Rating
0
P
PrintablesIsaac Corbrey

Gyroscope 45 Record Adapter

Topper prints in place, make sure it's flat against the print bed.

Downloads
73
Likes
23
Rating
0
P
Printablesmscalora

3D Gyroscope Keychain MFC@4

I split the two contrast color rings so that you can use manual color changes for only 4 layers on each side. I'll attach my modified gcode along with 3mf and f3d. Note, 4 layers assumes 0.2mm layer height e.g. 0.8 mm. Attribution for CAD…

Downloads
72
Likes
6
Rating
5
P
PrintablesPosix

PrusaBox Spinning Gyroscope X-axis

Remixed the remixed remix of another remix ;) PrusaBox version, for the enclosure made by printer-box, with negative volume to create little cuts on the outer circle, so that it does not hit the plexiglass of the enclosure. If you have…

Downloads
71
Likes
13
Rating
5
P
PrintablesJACK98

Fidget Gyroscope Keychain

Gyroscope fidget keychain.

Downloads
69
Likes
6
Rating
0
P
PrintablesLuBi Tech

Gyroscope with a levitating optical effect

Gyroscope with a levitating optical effect. Just spin it and have fun. :). Two stl files: gyroscope with holes solid gyroscope Print tips: add support add brim to the bottom after printing remove the brim from the bottom part. The bottom…

Downloads
67
Likes
5
Rating
3

Star Gyroscope Nativity

This is a star gyroscope but with the nativity in the middle. Plus the star outline becomes the star for the nativity. I also really liked that I could print these out easily in different colors. Each of them spins independently.

Downloads
65
Likes
19
Rating
0
P
Printablesschuetzi99

spinning disk top / gyroscope, three-part, assembly without gluing

This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing. This one has a disk instead of spokes. Here you can see, how long it spinns (about 105 sec.): Please take also…

Downloads
63
Likes
9
Rating
5

Gyroscope Toy

Battery Powered Gyroscope Toy with Point and Hole mount. Designed to use 2x AAA Batteries, 1.5V DC Motor, Modular Switch, and wiring commonly available on Amazon.

Downloads
63
Likes
10
Rating
5
P
PrintablesPlexi

Gyroscope Stand and Pull cord

Accessories for using a gyroscope. The pull tab should be tied to a strong but thin nylon cord. The stand provides a place to demonstrate the principles of a gyroscope. Here's a good website that explains:…

Downloads
61
Likes
7
Rating
5
P
PrintablesTano

Physics Gyroscope with DC Motor – Demonstrate Precession & Nutation

Looking for a hands-on way to teach rotational dynamics , angular momentum , and gyroscopic motion ? This 3D-printed gyroscope is designed for physics educators, students, and makers who want to explore fundamental physics concepts…

Downloads
56
Likes
10
Rating
0
P
PrintablesVashiru

Helper pin to losen Ultimate fidget toy - bearing, gyroscope and gear all in one

I printed the Ultimate fidget toy - bearing, gyroscope and gear all in one by Julie Bjerregård Rasmussen , but had some trouble losening the inner bearing. Figured I could easily print a pin with the same 'gears' as the innermost bearing…

Downloads
56
Likes
4
Rating
5
P
Printablesbelittlemaker

Little Gyroscope Christmas Balls

Design: Structure: Gyroscope-based Christmas ornaments Components: 4 concentric rings Interior Element: Central decorative figure Decoration Options: Ring Heart Star Snowflake Dimensions: Outer Ring Diameter: 67 cm Maximum Figure Height:…

Downloads
50
Likes
2
Rating
0
P
PrintablesAgent_Gator

6 Ring Fidget Gyroscope

No need for assembly

Downloads
48
Likes
2
Rating
0
P
PrintablesBogomips

Gyroscope II puzzle

I made this second gyroscope looking puzzle because I like puzzles. You can play with the dimensions (parametric table) but, as always, be careful with the width on small diameters. To make a puzzle you need 12 pieces (yes the naming is…

Downloads
47
Likes
12
Rating
0
P
PrintablesEndless

MINI Gyroscope Fidget

Tiny little fidget to bring with you!

Downloads
45
Likes
3
Rating
0
P
PrintablesRC Showdowm

Gyroshuttle: A 3D-Printed Gyroscope-Integrated Space Shuttle Model

What is the Gyroshuttle? The Gyroshuttle model is designed as an educational tool to demonstrate the principles of gyroscopic motion in a tangible and engaging way. Ideal for use in schools and universities, this model integrates a…

Downloads
43
Likes
13
Rating
0
P
PrintablesSuperprinter

Gyroscope Fidget

This one is very sturdy and a small fidget, easy to carry around and distract yourself.

Downloads
42
Likes
1
Rating
0
P
Printablesthebrownwelsh

Gyroscope Beer / Soda Can Holder - ROVIC GOLF CART ATTACHMENT

Remixed a very well made can holder design, just a little so that it would attach to the Rovic brand golf cart. Clips on perfectly to the existing cup holder attachment “nub” thing on the cart. Doubled the wall thickness so it hopefully…

Downloads
33
Likes
1
Rating
0
P
PrintablesCarGuy

Gyroscope fidget

I made this gyroscope fidget in Tinkercad. Supports required. Print in Place.

Downloads
32
Likes
5
Rating
0
P
PrintablesAppLe_Mix

Gyroscope Christmas bauble

Gyroscope Christmas bauble, place anything you want in the center of it, even model of car. It has a hole which allow to hang it on Christmas tree or desk. I'm giving version with empty center which you can customize like you want, and…

Downloads
32
Likes
7
Rating
5
P
PrintablesEndless

HEX Gyroscope Fidget

A simple print in place Hex fidget, that makes mesmerizing shapes when fidgeted with!

Downloads
32
Likes
2
Rating
0
P
PrintablesDH_engineering

Toy Gyroscope Gimbal

This is a gimbal frame for the classic Tobar Gyroscope, giving a stable support for gyro experiments. This design uses three standard 608 ball bearings (8x22x7mm), which can be purchased for a low price on eBay or Amazon. There are 4…

Downloads
27
Likes
4
Rating
0
P
Printablesblmak

gyroscope stand

This is just a stand for those cheap gyroscope toys. Category: Toy & Game Accessories

Downloads
27
Likes
1
Rating
0
P
PrintablesFranky Storms

Gyroscope from The Cycle: Frontier

This is the lootable epic item from the video game, The Cycle: Frontier. Item Description: Helps keeps things pointing where they're supposed to be pointing even in the roughest conditions, making it quite useful for printing some weapon…

Downloads
25
Likes
2
Rating
0

Replacement Gyroscope flywheel

Replacement Flywheel for gyroscope. Recommended that you split about the equator in slicer to print without support.

Downloads
25
Likes
4
Rating
0
P
PrintablesRoRo24

Star Wars Gyroscope

This is a Star Wars Gyroscope, both multicolor and single-color

Downloads
24
Likes
3
Rating
0
P
PrintablesMuad´Dib

Číselná káča (Number gyroscope)

Podstavec horní části nasaďte do díry ve spodní části. Pozor, jde to ztuha. Obě části na sebe nasaďte co nejpřesněji. Nic se nemusí lepit. Insert the base of the upper part into the hole in the lower part. Careful, it's a bit stiff. Fit…

Downloads
23
Likes
3
Rating
0
P
PrintablesSitRepPope

Mk4 remix of my remixed MK3 Davinci Gyroscope

Originally remixed this model for my MK3 to add a Davinci inspired Vitruvian Man. Now added mount for the MK4 X-axis thanks to the work from Jose Cruz on his remix of the original gryoscope found here.…

Downloads
21
Likes
2
Rating
4
P
PrintablesRoRo24

Gyroscope Base

If you want to design gyroscopes but don't know how to make them, this model is perfect for you! It is a blank slate, open to your design.

Downloads
20
Likes
1
Rating
0
P
PrintablesRoRo24

Lego Gyroscope

This is a Lego gyroscope, there is a MMU and single-color version

Downloads
19
Likes
1
Rating
0
P
PrintablesEndless

Double Gyroscope Fidget!

2 types of gyroscope fidgets in one, the outer rings can only move and rotate around their axis, while the inner rings can move more freely in any direction!

Downloads
19
Likes
2
Rating
0
P
PrintablesAhmed Azzam

Gyroscope Cup Holder

The Self-Leveling Gyroscopic Cup Holder is a 100% Print-in-Place mechanical model inspired by multi-axis gimbal stabilization. Designed with integrated rotational clearances, the mechanism isolates the central cup holder from external…

Downloads
19
Likes
3
Rating
0
P
Printablesmoondoctor

TEDCO Original Gyroscope Coaster

Inspiration of this coaster comes by the gyroscope my son was playing with recently that I also had growing up. The Tedco Original gyroscope. I used the wheel weight from the middle (I couldn't decide how to implement the frame parts).…

Downloads
19
Likes
3
Rating
0
P
PrintablesRoRo24

Bambu Lab Gyroscope

This is a Bambu Lab Gyroscope, there are single color and MMU files

Downloads
18
Likes
1
Rating
0
P
PrintablesGUSGUS

gyroscope fidget

a cool fidget to fight off bordum and stay engaged

Downloads
16
Likes
2
Rating
0
P
PrintablesRoRo24

Captain America Gyroscope

A gyroscope of Captain America's Shield

Downloads
14
Likes
1
Rating
0
P
PrintablesSocinPower

Adapter insert for DIY gyroscope weight

Hello there I designed this model with SolidWorks. The purpose of it is to center a weight for your DIY gyroscope with rod. My DIY mechanical gyroscope is made with an M5 threaded rod. So, feel free to scale it according to your rod or…

Downloads
14
Likes
6
Rating
0
P
PrintablesPnM LLC

An optical illusion for the Prusa MK3S x-axis with mount for gyroscope

An optical illusion for the Prusa MK3S x-axis with mount for gyroscope.

Downloads
13
Likes
7
Rating
0
P
PrintablesObitx

Gyroscopekeychain

Gyroscopekeychain for all those who always need something in hand to play. The pendant can also be personalized.

Downloads
12
Likes
1
Rating
0
P
PrintablesRoRo24

Holly Gyroscope

This is a holly gyroscope, 3mf for multicolor, stl for single color

Downloads
11
Likes
2
Rating
0
P
PrintablesImortalphoenix

gyroscope fidget

prototype#1

Downloads
10
Likes
0
Rating
0
P
PrintablesForgeFiles

Gyroscope Fidget Spinner, Print in Place, 3 Nested Gimbal Rings, - 3D Printable STL File

A unique 3D printable creation — this Gyroscope Fidget Spinner, Print in Place, 3 Nested Gimbal Rings, Physics Desk Toy Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY…

Downloads
10
Likes
0
Rating
0
P
PrintablesTony Hanma

Print-in-Place Gimbal Gyroscope - 4 Rings, No Supports

Four nested gimbal rings on alternating cone pivots, printed flat and already assembled. Spin the centre disc. 104 mm across, 10 mm thick rings with 0.8 mm gaps Cone pivots (Ø5.2 → Ø1.2) in cone sockets with 0.45 mm clearance, alternating…

Downloads
10
Likes
1
Rating
0
P
Printablesacmeman

Gyroscope Fidget Rings v2

The Fidget is an improvement of my earlier design. One issue was rigs would lock. In the new design, Each ring now has a V-shaped groove running all the way around its inner surface at mid-height. Each inner ring has 2 pins on its outer…

Downloads
10
Likes
0
Rating
0