Search results: hd

Sort order

5,340 models

P
PrintablesNautilus Forge

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
4,274
Likes
1,071
Rating
5
P
Printablesevax design

Happy Birthday pinprick

It is a decoration designed to decorate a cake. It's very simple. It is 14 cm high, 20 cm wide and 0,4 cm thick. Please refer to the printing instructions before printing. The model can be proportionally scaled up or down, but you need to…

Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant

Downloads
1,315
Likes
163
Rating
5
P
PrintablesAnubiz3D

2.5" HDD / SSD Caddy for HP ProLiant Server G5 G6 G7

This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant

Downloads
1,260
Likes
139
Rating
4.8
P
PrintablesArtyL

Prusa MK3 RHD Fan Shroud Duct revC

This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
1,217
Likes
94
Rating
5
P
PrintablesScott Gibb

2.5" HDD Case

3D printed 2.5" HDD Enclosure A simple 3D printed case for an old 2.5" HDD. The case is designed such that, for the most part, it is a push-fit, with four nuts at the bottom, mounting the drive to the plastic case. Equipment List 4 x…

Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant

Downloads
936
Likes
60
Rating
5
P
PrintablesNozzle

Happy Birthday Text

A simple Happy Birthday text

Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant

Downloads
907
Likes
43
Rating
4.71
P
Printablescedarrapidsboy

HDD + SSD Tray

Put all your spare disk drives in one place. Use this to organize a spare parts pile or line up your cold spares for your NAS. Fits 8x 3.5" disk drives and 3x 2.5" disk drives. Print settings: WARNING: Large print across entire build…

Print approx. €17.35–€21.20 excl. taxPreliminary estimate for one variant

Downloads
740
Likes
105
Rating
5
P
PrintablesDraakjeYoblama

Apple Mac Pro 3.5" to 2.5" HDD/SSD mount adapter

Adapter for the 4,1 and 5,1 Mac pro (2009-2010) to fit smaller HDD or SSD on the mount meant for bigger HDD. It will only work with SATA drives, because that's what the computer uses. The 4 small printed bolts are not strictly necessary…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
703
Likes
48
Rating
5
P
PrintablesLoubie3D

Pōpoki: the Good Luck Tiki cat (for Chris's birthday)

Today (16th July)is my friend Chris's birthday and as he loves Hawaii and cats, I had a theme for for his birthday model in mind already. Chris is a good pal and deserves birthday wishes There are not many tiki cats and definitely not…

Print approx. €9.92–€12.12 excl. taxPreliminary estimate for one variant

Downloads
392
Likes
100
Rating
4.75
P
PrintablesKONEz*347

Tap/Faucet Aerator Mischdüsenschlüssel, für Wasserhähne

wrench, for taps M24 aerator, tap strainer insert external thread, Tap / Faucet Aerator (Perlator) filter Tool

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
380
Likes
55
Rating
4.94
P
PrintablesYourigh

HDD Grinder

Look what I did to your hard drive! - this can serve also as a nice prank. Recovery of data not guaranteed (aka impossible). Why HDD grinder? If you don't have full workshop and you just need to sharpen a drill bit or, round edges on…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
276
Rating
5
P
PrintablesLukasz

HDZero Goggle SpeedyBee Analog VRX cover.

This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
300
Likes
21
Rating
5
P
PrintablesmoWerk

Birthday Cake Topper Numerals | Leckerli One Font Numbers

Leckerli One Font Cake Topper Numerals 4cm high numerals, easily scalable (150% = 6cm, 200% = 8cm, etc.) Use the mirrored versions in case you like to have your buildplate pattern on the front. Font licensing The font “ Leckerli One ” was…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
36
Rating
5
P
Printablesvermontsfinest

Fire 10 HD Tablet Stand

Fit for a 10.1" 2019 Release, 9th gen Print Settings Printer: Ender 3 with Ender Extender kit Supports: Yes Resolution: 0.2mm Infill: 20% Filament material: PLA Charging wire used:…

Print approx. €36.11–€44.13 excl. taxPreliminary estimate for one variant

Downloads
274
Likes
23
Rating
0
P
PrintablesTom

Sortiment for Qbrick Systainer One 2.0 - Drawer 3.0 Ultra HD

Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…

Print approx. €19.01–€23.24 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
83
Rating
0
P
PrintablesHogger

16th birthday medal

16th birthday medal you can make for your son or daugter. Best printed with the color change function, see pictures. I used 4 colors, Prusament Galaxy-Black, Gentlements-Grey, Copper and Gold.

Print approx. €8.34–€10.20 excl. taxPreliminary estimate for one variant

Downloads
243
Likes
34
Rating
5
P
Printablespspf

Zalman HDD rails

Zalman Z3 Plus HDD rails Yes support PLA

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
14
Rating
0
P
Printablesbrva

Frame-reduction-holder for 2.5" HDD SSD to 3.5" slot. / Rámeček-redukce-držák pro 2.5" HDD SSD do 3.5" pozice

To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
23
Rating
5
P
Printablescbearman

Console for Elecrow 5" HDMI Touchscreen and Raspberry PI

A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…

Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
11
Rating
0
P
PrintablesEdison82

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…

Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
31
Rating
4
P
Printablesguennersen

Shower Seal 6 mm / Duschdichtung 6 mm

🇬🇧 EN Seal for 6 mm glass shower door with drip rail and long lip at the bottom. 5 cm width, can be set to the appropriate size in slicer by adjusting the z-axis. 🇩🇪 DE Dichtung für 6 mm starke Glasduschtür mit Abtropfleiste und langer…

Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
168
Likes
8
Rating
5
P
PrintablesSorcier

HDD Case for BitFenix Prodigy m 2022

I designed this compartment in order to put 6 hard drives 3.5 in the bottom of the BitFenix prodigy M 2022 case in the place normally intended to contain only two. I had originally created a NAS server under the Unraid OS with 4 hard…

Print approx. €9.74–€11.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
142
Likes
23
Rating
0
P

Birthday / Greeting Card - Hinged - No Pocket - for your own message with Power Point or felt tip pen

This card is similar to others I have published, except it is plain, without an embedded message, and without a pocket within. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
10
Rating
0
P
PrintablesMarcus

SSD HDD Cage 8 x 2.5 to 3x5.25

Needed to 8 x 2.5" ssd to a lab server There is a small tolerance so you might need to push in the disk a litle bit. There is room for a 120mm fan enjoy

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
22
Rating
0
P
PrintablesMattWasHere

Walksnail Avatar HD Goggles X Module Bay

Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
132
Likes
16
Rating
0
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
10
Rating
0
P
Printablesel.pollo.diablo

Happy birthday cake topper with candle

I made this model to use on all birthdays. I added the possibility of putting an interlocking candle holder at the top of the ‘birthday’ a

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
12
Rating
5
P
PrintablesShmidtey

Leg extension for home depot HDX storage shelf/rack

This is a leg extension for the HDX storage shelving unit from home depot. It extends the height by approximately 100mm. I printed mine with my Prusa Mini+ in PETG at 0.2mm layer height, no supports needed. The fit should be a lightly…

Print approx. €14.19–€17.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
14
Rating
3
P
PrintablesTomáš Čmiko

2.5" HDD/SSD Holder – 10 Drives (7&9.5mm Support)

A compact and practical storage holder designed for 2.5" HDD and SSD drives . The holder can store up to 10 drives and is compatible with both 7 mm and 9.5 mm thick disks , without any adapters or modifications. Each slot is shaped to…

Print approx. €5.16–€6.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
14
Rating
0
P
PrintablesSantiago gomez

happy birthday topper

happy birthday topper

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
10
Rating
0
P
PrintablesDRALUOP

BAFANG GUARD (BBSHD-BBS01-BBS02) Electric Bike Rain Snow Mud Protector

Protect your Bafang BBS01, BBS02, or BBSHD motor with this 3D-printed guard, easily installed on your bike frame with simple zip ties. Designed to shield your motor from rain, snow, and mud splashes from the front wheel, it’s especially…

Print approx. €18.69–€22.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
8
Rating
5
P
PrintablesSTSUL.CZ

cake topper Happy Birthday

The object is printed with the front side facing the bed.

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
85
Likes
6
Rating
0
P
PrintablesAndre

USB-Flashdrive und SD-Card Shelf for Cooler Master QUBE 500

A simple shelf to keep your flashdrives and sd-cards in reach

Print approx. €5.05–€6.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
85
Likes
21
Rating
0
P
Printableszxb466

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
23
Rating
5
P
PrintablesLS3print

Schuleinführung Tischdeko

Tischdeko für eine Schuleinführung. Größe (123) = 2cmx2cm Größe (ABC) = 2cmx3cm Größe (Schulkind) = 1,5cmx7cm Die einzelnen Modelle kann jeder auf eine gewünschte Größe, selber skalieren. (nur nicht kleiner da es instabil wird)…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
16
Rating
0
P
Printableswizhack

Bafang bbshd brake sensor mount tektro auriga comp

FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
63
Likes
5
Rating
0
P
PrintablesSeveriY

Sennheiser HD58X driver cover

This part is designed to to hold a piece of foam or other material over the driver to tweak the sound signature. Installation: Press the part carefully on the driver assembly, (glue is not necessary). Printed with Creality Ender 3, using…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
2
Rating
0
P
Printableseulampia46

Happy Birthday cake decoration (La multi ani decoratiune tort, Română )

MK4 and MK3S PLA; Nozzle=0,4; Infill=20%; Layer height= 0,3 mm

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
4
Rating
0
P
PrintablesSJM

Airport Runway - Additional Touchdown Point Module - For the bigger planes

Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height…

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
9
Rating
0
P
PrintablesLGworkshop

Flashdrive storage tray

Prints nicely in PLA, no supports needed. Since it's kind of large, I used glue stick on the print bed to make sure the corners didn't lift during print. Fusion360 file is included if you want to store more or less sticks (adjust User…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
2
Rating
0
P
PrintablesUca

HDMI Port Stylus Holder

My notebooks have no place to mount a stylus, I think the empty HDMI port would be a good option. So I made them😊

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
3
Rating
0
P
PrintablesJurek

Guyrings DX-WIRE HD 10m

About I am sharing with you my project of another guy ring for www.DX-WIRE.de 10m heavy-duty 2013 mast. There are various *.3mf files available for diameters as measured on the mast I got from dx-wire, I hope they are consistent among the…

Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
1
Rating
0
P
PrintablesLegufix

Cookie cutter 50. birthday

A nice gift for a 50th birthday party

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
5
Rating
0
P
PrintablesOtty_Skipper

IKEA Tisken rod holder , Shower curtain Clothdryer

Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
8
Rating
0
P
Printables3DDDS

Geschenkbox zum 16ten Geburtstag - Gift box for a 16th birthday

Geschenkbox mit Deckel in Form einer 16. Kann mit eigenen Geschenken gefüllt werden. Gift box with lid in the shape of a 16. Can be filled with your own gifts.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
4
Rating
5
P
PrintablesSpace3D

Prusa mini fan noise reducer for RHD Front Fan Duct

This is my remix of: https://www.printables.com/cs/model/136666-prusa-mini-heatbreak-fan-noise-reducer made to work with: https://www.printables.com/cs/model/52553-prusa-mini-rhd-front-fan-duct

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
5
Rating
5
P
PrintablesJolly

Braun Satin Hair 1 PowerPerfection HD180 Hair Dryer - Level Switch

The plastic switch of my aunt's hair dryer broke, so I did the only thing conceivable to a maker. I designed and printed the part. It took me a few tries to get the dimensions exactly right, but it worked in the end. I printed the part…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
2
Rating
0
P
PrintablesHolck

TRINITY2 - SmallHD Ultra5 Monitor Adaptor Plate

A small adaptor plate to mount the SmallHD Ultra5 Monitor to the existing ARRI Trinity2 brackets for the Small HD 503 (K0.0044368) or Transvideo Starlite (K0.0044367). Remove the 4 existing Torx screws from the ARRI bracket to remove the…

Print approx. €2.40–€2.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
13
Rating
0
P
PrintablesValad_Amoleo

Rack for External 2.5" HDD Drives

Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
4
Rating
0
P
PrintablesJoseph Vellucci

Enterprise SAS HDD Holder

Needed a way to store SAS drives. I printed this in PLA, .4 nozzle. Updated added STL file.

Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
4
Rating
5
P
PrintablesDarkmoon

Tischdreiecke für 3030 Profile

Habe mir aus 3030 Profilen einen Tisch mit diesen Teilen gebaut. erstellt in Auto Cad Fusion 360

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
29
Likes
3
Rating
0
P
PrintablesGolenes

NorTec HDFull webcam cover

Camera hatch for Nor-tec HDFull (10 euro's at action in the Netherlands). Place the slider in at the break-point in the GCode to lock it in.

Print approx. €1.28–€1.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
1
Rating
0
P
PrintablesNicval

Waveshare 7in HDMI LCD (H) holder

holder and vesa mount for the waveshare 7" hdmi lcd (H) vesa is 75 and 100 uses m3 inserts holes are 3.5mm

Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
3
Rating
0
P
PrintablesBoris Š

CrashDerby Toy Tank

Printing instructions Base & Chassis - print without supports Hood - print with organic supports

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
8
Rating
5
P
PrintablesGreymanx

VELKASE Velka 3 HDPlex400 Cover

The HDPLEX SFX bracket has been out of stock for months after building a SFF PC in the VELKASE Velka 3. I opted to go with the Screw-Lock 7.4*5.0mm Female DC Jack option for use with a DELL laptop power supply. Covers the case's power…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
1
Rating
0
P
PrintablesSteveW91

HHD Drawer Case

This is a cover for a PC hard drive drawer

Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
5
Rating
0
P
Printablesfardog

Fisher & Paykel DishDrawer Drain Hose Loop Clamp

A drain hose loop clamp for Fisher & Paykel dual-drain hose DishDrawers, US/Canada models. Good if you can't use their supplied one due to space. DishDrawers have some specific height requirements for the drain loop, and the supplied…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
2
Rating
5
P
PrintablesOstseefoto

Absaugadapter Einhell Flachdübelfräse

Damit das OSVAC-System auch an dieser Flachdübelfräse verwendet werden kann. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Anschluß in Tinkercad erstellt und angebaut.

Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
1
Rating
0
P
PrintablesTomáš Čmiko

3.5" HDD Holder – 5 Drives

A sturdy and space-efficient holder designed for 3.5" hard drives , perfect for organizing and storing multiple drives safely. The holder supports 5 drives and is designed for the two most common 3.5" HDD thicknesses: 21 mm and 25 mm .…

Print approx. €7.77–€9.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
3
Rating
0
P
PrintablesJan Muller

Label for Dell 3.5 HDD caddy 13G

simple clip-on tag that you can emboss text on (add negative-volume in PrusaSlicer) 0.5mm depth works well. Or you can use a sharpie. No supports, infill is not present. keywords: 3.5'' SAS SATA Hard Drive Tray Caddy for Dell PowerEdge…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
8
Rating
0
P
PrintablesBart

usb_mini_flashdisk_grip

This model solves trouble with slippery surface of flash disk for prusa mini 3D printer. Moreover, I tried out the new Prusaslicer 2.4.0 function - indented / notched outer surface.

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
2
Rating
0
P
PrintablesVincent

Husky 1/4 in Air Compressor Filter (HDA70403AV) Mount

A simple mount for the Husky brand air compressor filter HDA70403AV. Attach to the filter with an M4x8 bolt and then to your surface with whatever length M4 hardware you need. I printed mine with 4 perimeters, 50% infill, 0.25 structural…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
4
Rating
0
P
PrintablesBart

USB_flashdisk_holder

Holder of the USB flash disk for 3D printer Prusa Mini. You need also cabel “New USB 3.0 Extension Cable Up Down Left Right Angle 90 Degee” from Aliexpres.com. Why this type of holder ? My “Mini” is storaged in box and I cann't see slot…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
0
Rating
0
P
Printableslvorthman

OREI HDMI Extender TV Mount

This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…

Print approx. €2.24–€2.73 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesHelle

Jack Daniels in der Blechdose

Für Sammler zum besseren stellen. Es gibt schon Varianten für nur Flaschen und Flaschen im Karton

Print approx. €6.46–€7.90 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
3
Rating
0
P
PrintablesUca

SpotCam FHD 2 Mount for Prusa CORE One

Buddy3D Camera for Prusa CORE One is good, but the shipping is too expensive for me😢. So I designed the mount for cheap local SpotCam FHD 2 for my CORE One directly. Assembly requires: 2x M3*12mm screw 2x M3 square nut 3x Ø10*2T magnet 6x…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
1
Rating
0
P
PrintablesmVentions

Flashdrive Shroud | Rhythm Game Instruments (Rock Band)

Description and Design Goal: Regular flashdrives are boring. Originally, this was created with the intention of storing rhythgame songs. This shroud is designed to fit the 128gb/256gb Amazon Basics flashdrive (I have not tried this with…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P
Printablesgojimmypi

ULX3S Elecrow 7 inch HDMI Display Enclosure

See announcement: https://www.crowdsupply.com/radiona/ulx3s/updates/new-enclosure-and-upcoming-campaign-news Latest code: https://github.com/gojimmypi/ulx3s-elecrow-7inch-hdmi-enclosure Assembly instructions:…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2
Likes
2
Rating
0

JBOD Enclosure 3D – Multi-HDD Case for NAS Expansion

🧰 JBOD Enclosure 3D – Multi-HDD Case for NAS Expansion This is a JBOD enclosure (Just a Bunch Of Disks), designed for DIY NAS projects like Proxmox , TrueNAS , Unraid , or even Raspberry Pi setups using SATA HBA or port multipliers.…

Print approx. €5.23–€6.39 excl. taxPreliminary estimate for one variant

Likes
9
Rating
0
P
PrintablesDET-Man

BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door)

This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…

Downloads
13,560
Likes
276
Rating
4.78
P
PrintablesEDnation

BTT HDMI5 V1.2 display mount Voron

**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…

Downloads
12,318
Likes
231
Rating
4.97
P
PrintablesMarkGee

ChibiGrim on Skulls NEW HD version

UPDATE: Sorry, I didn't realize I uploaded the “original” remix twice, the _medres file is the new sculpt. I was wondering why everyone was printing the old version. A remix of the ChibiGrim model. Added a base of skulls for Grim to stand…

Downloads
12,071
Likes
3,023
Rating
4.95
P
PrintablesMZ4250

Curse of Strahd Collection

My takes on the Characters, NPCs and Creatures of Curse of Strahd are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…

Downloads
6,440
Likes
483
Rating
5
P
PrintablesSquirtle

3.5" Generic HDD Caddy

A generic hdd caddy for a 3.5" hard drive. The caddy uses 4 standartized pc case screws like https://www.aquatuning.co.uk/media/image/af/5b/d6/94577\_1\_600x600.jpg You can find a generic 5bay cage here:…

Downloads
5,958
Likes
474
Rating
5
P
PrintablesHeiko

Egg holder - egg stand with changeable label MHD/BBD

Egg holder-egg box-egg stand with changeable sign for MHD/BBD m With changeable compartment to insert small pieces of paper to write down the expiration date. Always fresh eggs, thanks to this dispenser, fill the dispenser with up to 10…

Downloads
4,959
Likes
1,270
Rating
4.43
P
PrintablesjonnieZG

2.5" to 3.5" SSD HDD Bay Adapter - Screwless

Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…

Downloads
4,715
Likes
407
Rating
5
P

PS2 2.5" HDD & SSD converter/adapter/mount/caddy

Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…

Downloads
4,307
Likes
212
Rating
4.67
P
PrintablesCezaryKrzy

Happy Birthday!

Happy Birthday!

Downloads
3,984
Likes
268
Rating
4.9
P
PrintablesRonanWarrior

Wall Mount for Fire Tablet HD 10, 13thGen (2023) and 11th Gen (2021)

Good News everyone! Now there is a version that is compatible with the 13thGen (2023) Fire HD 10 tablet. Not only that but now there is a new feature/option for physical buttons on the side of the mount for the power and volume…

Downloads
3,881
Likes
369
Rating
5
P
PrintablesMoonyx

HDD Cage | 1 - 6 Bays

Updated Version Please look at version 2 of my HDD Cage as it has a lot of improvements over this version Info A compact hard drive cage for 3.5" drives that will fit most cases. Can be mounted to 120mm and 140mm fan slots, not single fan…

Downloads
3,810
Likes
1,264
Rating
5
P
PrintablesDopins
Downloads
3,590
Likes
114
Rating
4.75
P
PrintablesTurnt

HDD Hard Disk Drive Stacker

A simple and scalable hard drive mount for external applications. Print 2 per drive and stack them up. If you stack 4 HDD's high you can attach one or two 120mm fans. Then stack blocks of 4 HDD's until it feels unsafe. If only using 1 or…

Downloads
3,523
Likes
517
Rating
5

Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more

It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…

Downloads
3,512
Likes
1,028
Rating
5
P
PrintablesJuicyLegend

4 Bay 3.5" HDD Cage

An extended version of the 2 Bay 3.5" HDD Cage made by @MattHope, because 2 bays weren't enough for me and I found this design nice. Keep in mind that general print time is 2-3 days. The dimensions of the HDD cage are: LxWxH = 160x(Base:…

Downloads
3,475
Likes
379
Rating
4.5
P
Printablesrohde•labs

2.5" HDD / SSD Reference Model

I couldn't find any decent reference models for a standard 2.5" Hard Disk Drive (HDD) / Solid-State Drive (SSD) that included a non-STL source file. I've created this reference model and want to share the STEP file in addition to the STL.…

Downloads
3,371
Likes
75
Rating
4.91
P
Printablesmfischer79

HDMI Dust Cover/Plug/Cap

HDMI Dust Cover cap with grip for easy removal. Check out all other port covers: USB-A port cover - https://www.printables.com/model/404578-usb-a-dust-cover-plug USB-C port cover -…

Downloads
3,361
Likes
339
Rating
4.86
P
Printablesonus

2.5" to 3.5" HDD Adapter

Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…

Downloads
3,176
Likes
169
Rating
4.9
P
PrintablesMakeAUsername

ADHD Highway to, hey look a squirrel!

UPDATED.14-2-2025: -Added a stand of this file to get a bureau stand. ------------------------------------------------------------------------------------------------------------ Always looking at facebook and i kept seeing this meme.…

Downloads
3,156
Likes
1,462
Rating
5
P
Printablesbuginside

Peppa Pig sitting, HD

High polygon version, no supports needed, very easy print. Print Settings Printer: Artillery Genius Pro Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 10 Filament: Sakata3D PLA850 Skin Tone 1 Category: Creatures

Downloads
3,096
Likes
79
Rating
4.93
P
PrintablesWolfyMode

Stitch HAPPY BIRTHDAY

Its a simple model for my friends Birthday UPDATE: I uploaded V2 version with space for Neodymium Magnet so print can become fridge magnet :) Use ⌀10mm 3mm thickness Neodymium Magnet, drop it arround one hour in the print, or if you want…

Downloads
2,874
Likes
285
Rating
5
P
Printablesisaacramirezd

3.5" to 2.5" HDD adapter

an adapter to perfictly fit 2.5" ssd's or hdd's to 3.5" disk bays

Downloads
2,837
Likes
101
Rating
4.67
P
PrintablesPYC3D.ES

CAKE TOPPER HAPPY BIRTHDAY

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE CAKE TOPPER HAPPY BIRTHDAY Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and…

Downloads
2,801
Likes
312
Rating
4.96
P
PrintablesMartin

Stargate in an off-world pedestal with a DHD

This is my model of the Stargate in the off-world pedestal with DHD. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths…

Downloads
2,764
Likes
694
Rating
4.92
P
PrintablesD4rk Helmet

Modular 3.5" HDD Cage

I bought a used Case, but the HDD cage was missing. So I had to make a new one. It is pretty generic. It is designed for M3x10 and M3x16 bolts and hex nuts. I desinged it for Noctua Fans. But other fans should fit ass well. I highly…

Downloads
2,719
Likes
379
Rating
4.92
P
PrintablesRetro Frog

Gamecube GC Video Support Brace for Carby, Prism and GCHD mkII

Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…

Downloads
2,696
Likes
156
Rating
5
P
PrintablesVger1981

2,5 HDD drive cover

A simple cover for the old laptop drive

Downloads
2,658
Likes
942
Rating
5
P
Printablesmeie1kyl

Double 2.5 to 3.5 SSD HDD bay adapter

Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…

Downloads
2,637
Likes
271
Rating
4.85
P
Printablesredaeq

10, 18, 20, 21, 25, 30, 40, 50, 60, 70, 80, 90, 99, 100 th birthday geburtstag holder / stand

10, 18, 20, 21, 25, 30, 40, 50, 60, 70, 80, 90, 99, 100 th birthday geburtstag holder / stand for…..the XX th birthday ;) Also check out these models:…

Downloads
2,472
Likes
105
Rating
4.83
P
PrintablesOlof Ogland

Prusa Mini RHD Fan Duct Rev. C

A remix of the fantastic RH_Dreambox fan shroud for MK3 to fit the prusa mini. Files fitting both original Mini and Rev 2 included. https://www.thingiverse.com/thing:3249344 Print instructions EDIT 2021-02-16 The shroud has been lowered 3…

Downloads
2,444
Likes
470
Rating
4.77
P
PrintablesMZ4250

Birthday Cake Mimic

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
2,433
Likes
105
Rating
5