823 models
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Divided Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
In case you print several filament swatches , you might need a storage solution. This is an improved one, where each swatch has its own slot-in holder which includes a hinge, in order to browse through all the colors/materials quickly.…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
I did another experiment with TPU/PLA Multi-Material printing. I changed the interface section in a way that over a configurable number of layers the 2 materials get kind of "woven" (per layer) to each other (see pic of interface…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Cute little containers with hinged lid and dovetail groove to combine them to a complete small part storage system. I designed this originally for my beloved girlfriends jewelry but discovered very quickly that these little containers…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
No supports, print in place and easy to print I tried to make it simple and useful. The upper side has a steep angle but it prints well event with 0.3 layer height. Please enjoy and share your comments Print instructions no supports print…
Print approx. €7.36–€9.00 excl. taxPreliminary estimate for one variant
Prints happily at 0.3mm layer height (or adaptive if you're using PrusaSlicer) - no supports required.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This is a glasses case with print-in-place hinge. It keeps your glasses secure even when open. The example images show “oversized” reading glasses from amazon. The inner length is 148mm. The hinge friction will keep the lid closed, but…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
I chose to print this lure standing upright because the details look better in that configuration. In order to loosen the hinge I had to move it open and close several times and pick out support material but eventually it does loosen up…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
This design offers a low profile handle for the hinged lid add-on originally designed by the Prusa Research team for the Original Prusa Enclosure. Handle Features Simple and Discreet: The low profile design minimizes protrusion, creating…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET
Needed a box for my quick change Nextruder Hotend Assemblies. Holds 3 completed assemblies, and 16 assorted print heads. I enlarged the box, but also shortened its height. Be careful the first time you try to close the case or you might…
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
My own take on the typical bag clip. I've found that this length (~110mm) is the most useful for me. The pattern on the front and back means my wife appreciates them more.
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
When having both the optional “Hinged-Lid” and “Advanced Filtration System” add-on installed, you'll find you have to share 1 connection with both of them. I've adjusted the “Hinged Lid Hinge-Bracket-R” to accommodate “Advanced Filtration…
Print approx. €8.75–€10.69 excl. taxPreliminary estimate for PETGSource material: PET
A very unhinged set of dice :) Printing recommendations: FDM printer with 0.4mm nozzle 0.15mm layer height Generic PLA Organic supports everywhere 15% infill No brim or skirt Recommend retracting when moving between objects if printing…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Summary I have cats, and they are curious when the printer starts printing. So I needed a way to keep them out. What started out as taping some plexi glass to my IKEA Bror shelf turned into this. We'll see where it goes from here.…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
remix for the Hinged Lid
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
I've an unreasonable fear of the garbage disposal. This hinged cover prevents accidental switch presses. Designed for Leviton screw-less plates, but you can adapt it for other brands using the attached Fusion360 source file. Print in…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
A simple modification of a hinge that creates a flap that we used to cover the green lights form our AC unit's control panel (because it's in our bedroom). All modifications and modeling simply done in Prusa Slicer.
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
In the days BC (Before Computers), we kept track of contacts' information on a large Rolodex card file. I was surprised to find that Rolodex card files are still available at Amazon and local stationary stores. The filament swatches are…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant
There is a new and improved 2026 version available here , or included for my club members . Yes, I know it's blasphemy as we already have the awesome mother of all flexi dinosaurs, the original Flexi Rex from DrLex . But in order to…
This is a fully parametric storage box with a hinged, snap-fit lid , designed in OpenSCAD (you need to install BOSL2) . All key dimensions can be adjusted, making it easy to adapt the box to your specific needs. The design is optimized…
This is the full kit to raise the Creality K1C lid to minimise/ eliminate the issue of cable chain bumping onto the lid when printing at the left edge (when viewing the Creality K1C from the front). It also eliminates the issue of…
Updates 2023-07-26 - Adjusted z-Height of Betweeners, all level with floor now. 2023-07-20 - Rear Betweener Added! Introducing the JC K1 Lid Riser now with hinges! Keep your lid attached and stop having to find a place for it when you get…
Projectvideo: https://youtu.be/IWbeTUQQgZ4 I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs Hinged Calibration Cube: https://www.printables.com/model/74825…
This is a modified version of Official_Dino55's Glamrock Freddy Head model. I added a hinge for the jaw and widened the neck hole to make the model wearable. The hinges only require two skateboard bearings. Rubber bands can be added to…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
Hinged Cable Clips V2 Make cable management fun, seriously! These cable clips offer refined improvements over the original Hinged Cable Clip design with much stronger latching and easier release. How does it work you ask? A redesigned…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates and more detailed instructions. Go to my site for an overview of my other models . Only a few of them are published on…
Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the Hinged…
Another version of customizable lockable box with hinges. Most of customizable boxes are here done in OpenSCAD. For those who prefer direct building models in 3D instead of writing a source code, this is a version in done in Fusion360.…
Simple small print-in-place box with Printables logo. Featured as a sample project in the upcoming Prusa Academy Fusion 360 online course.
This print was made as a proof of concept, as well as a model future use. The provided prints are primarily for testing purposes. On the other hand, the prints are useful on a try-before-you-buy basis, and they are perfectly useful little…
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
Hinged Box Fully printable general purpose box. If you need a partitioned box then please see my Box Thing 3649139 My boxes for shotgun chokes Thing 3652790 Choice of 4 included External size (mm) Internal size Minimum print bed size 120…
Print In Place Hinged Cable Management Strip Check out the video here: I got tired of pulling my charge cables out of the various comb style management strips so i designed this locking one. Can be either screw mounted or double side…
Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…
english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…
Removed the micro SD card slots for 3x more full-sized SD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of…
This is a latching/hinged parametric box, built in Replicad. Supports width, height, depth, dividers, outside radius and embossed text on the inside of the lid, engraved text on the outside, or inlayed text for MMU printing (or manual…
Took the Frog from the Flexi Frog Fidget in a Toad and hollowed it out to turn it into a fun little Frog trinket box. Made it a little stronger and improved the print quality. Printed in (3) different sizes. Great for storing or hiding…
Hinged lid stand for Flashforge Adventurer 5M (AD5M) 3d printer. Works with manufacturers' DIY enclosure - just unscrew screws and screw them back with this stand. When stand is not needed, it just laying flat on the back side of a lid.…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
NOTE: Do not print with supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 %
A compact, 3D-printable pill splitter designed for convenient tablet splitting. The hinged design allows easy operation, while the recessed cutting area helps position the tablet. The model folds into a compact shape for easy storage and…
this a chest model remixed from DrLex all the instructions are on his original model page the photo was also from his original page to show what the model looks like when finished, (this was made originally for his godson because of his…
If you are using the Creality K1/K1C Hinged Lid Riser and need to keep the lid open while printing some materials (e.g., PLA), do you feel that the opened lid is wobbling/ shaking a little too much during prints? Look no further. This…
There are 3 hip options included: Standard width flexible, wide flexible, and wide non-flexible. Shown in the photos is the wide flexible version.
This is a custom sized hinged lid box that is easy to print. No supports or assembly is required and can be printed on nearly any FDM printers' default settings. If you need a specific size feel free to leave a comment, I can generate…
I really liked the idea of the speedbump and hinged riser by these contributors listed below so I combined them to make them into one. Added 10mm height to the original parts and made ventilated and non-ventilated side pieces. Back plate…
Print-in-place customizable box with hinge and latch(es). There are a lot of improvements compared to original model. It can have more latches and there are some tweaks for easier printing. There are 2 styles of latch (simple and complex).
This is a simple box with hinge. Print settings don't really matter but I printed at .28mm layer and 10% infill
I created this assembly for my Sonic Pad. After adding sides to my printer, I needed a new way to mount my Sonic Pad and get it off my work bench. I wanted it to rotate out of the way when not in use. I found these hinges and modified…
Anatomically correct HINGED Skull and Jaw because you and I both know you're going to make this thing talk like a puppet. Three stl's are here. 1 - hingedSkullAndJaw are meant to print in one piece. Untested but SHOULD work. If it doesnt…
This is a print in place, 1 piece model. The holder/case has a built-in hinge and lid and self-latching. It holds 28 Micro SD cards and a 2-card bay for the SD Memory Cards. For the person who just wants to store more than 6 or 8 cards.…
Projectvideo: https://youtu.be/IWbeTUQQgZ4 Hinged Calibration Cube: https://www.printables.com/model/74825 Accessories 01: https://www.printables.com/model/75008 Accessories 02: https://www.printables.com/model/146880 Accessories 03:…
Masterful Dungeons Door is designed as part of the Masterful Dungeons modular dungeon system. This is a functional door featuring a working hinge, allowing it to open and close during play. The hinge is assembled using a short piece of…
Projectvideo: https://youtube.com/shorts/8ngqxC3aonA Hinged Calibration Cube: https://www.printables.com/model/74825 Accessories 01: https://www.printables.com/model/75008 Accessories 02: https://www.printables.com/model/146880…
This is a small storage box for small parts with a division in the middle. The lid is hinged and it snaps closed. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different…
UPDATE 05/07/2025 : the step files are now available ! I originally created this high clearance / low profile bumper for the Trx4m Bronco to solve the issue of poor attack and departure angle, as well as to reduce rubbing of the wheels…
After trying some of the other options I'd seen online I wasn't particularly happy with the ergonomics of any of them and I definitely didn't like using bolts or dowels to make a simple hinge. So I sat down and taught myself enough Fusion…
This box is designed to be laser cut from 3mm plywood - it is simply glued together, with one side going on last BEFORE the top lid; you can't attach the lid after it is all glued. Dimensions: 116 x 53 x 50 // W x D x H I've included a…
Update 05-05-2026: added 3mf file with the optional honeycomb mesh, ready to load into your slicer and use your own settings. I'm the lazy type of guy, hating to unscrew the panel clips every time i want to go into the electronics…
I printed it the way in the photo showing supports, and it turned out great. Printing it straight up and down would work too, but that was going to take longer on my printer and these supports didn't use too much more filament.
Hinged Dice Vault With Magnets Parts List 10mm x 3mm neodymium disc magnets CA glue 7 piece dice set Instructions Print with 2 walls, 15% infill of your choice, and no supports. Insert a pause on the layer that the magnet holes are…
The model in the pictures is printed on a 0.8 nozzle and 0.25 layer height and 1mm layer width in PLA. But the model should work with the normal 0.4mm or 0.6mm nozzles as well. Just slice for your printer. You can use 0.25mm layer height…
Projectvideo: https://youtu.be/IWbeTUQQgZ4 Hinged Calibration Cube: https://www.printables.com/model/74825 Accessories 01: https://www.printables.com/model/75008 Accessories 02: https://www.printables.com/model/146880 Accessories 03:…
Box prints open on back. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,2 Infill: 50-100 Filament: . PLA . Custom Section ============== Category: Organization
Bottle/Beer Marker with Cap Perfect Party Gadget! Every Crown Cap Bottle could be marked with the snap fit Bottle Marker! Never ever someone drinks your Beer😎 And you can simple close it with the integrated Cap! Kind of fidget toy…
Simple, print-in-place stand for Hueforge prints or other small 2d art.
NEW!!! UPDATED! ADDED SEALED FRONT AND REAR BETWEENERS! CREALITY K1C SLIM HINGED RISER USES STOCK HARDWARE SLIM, LESS TO NO DAMAGE! AND NOISE FROM PRINT HEAD CRASHING INTO THE R/F (camera) CORNER DOES NOT HIT NOWHERE NEAR AS HARD AS ANY…
Needed a lidded storage box for tiny parts like small screws. Hate how much trouble it is to get screws out of the “assortment” boxes from China so I custom designed this box with a ramp to help pull screws out with a finger: The model is…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
A small box with a hinged lid. Thin walls and very small hinges give it a delicate look — the hinges seem to disappear when the lid is shut — but the hinges are sturdy and smooth. Prints in place: no supports needed. Printed in PETG using…
Edit 1/30/25: slight change to make box rectangular, and full multicolor version for Sprawlopolis and Tussie Mussie available here. This is a small hinged card box I made specifically as a hard, protective travel case for my Button Shy…
I wanted a riser for my K1C which would allow me to secure the corners using the M3x8 screws which already support the printer lid. I modified the Creality K1/K1C Hinged Riser corners to allow me to do this. Features No supports required…
Compact Screwdriver Bit Storage Case Keep your screwdriver bits organized and protected with this compact 3D printable storage case. Designed with a durable hinged lid and secure snap-lock latch, this case provides quick access to your…
Who? People with Filum Disease have difficulty controlling eye movements and processing shapes and forms, which makes reading difficult. Looking down with the neck bent can also cause pain and vital sign issues. Why? Slant boards are used…
Like most things I design I had a need for this. This is a print-in-place case for 6 x 18650 batteries that uses minimal filament. It should print in one piece and come off the bed ready to go, there are small ribs to support the…
Print in place case for Kindle (paperwhite, 2012). The cover can be folded completely backwards for easy handling. I placed recesses for 4 magnets (8mm diameter 2mm thick) in the cover and the back. If you prefer to insert magnets, the…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
HellAlex model is brilliant. Perfect for my need: to hold two cards that are frequently used throughout the day. It fits safely and the space between the cards is about 7.5mm, which is great for the proximity sensors I have to interact.…
Very simple picture stand, scaled for a 5x7" picture. The hinge is a piece of filament. Print instructions Print flat, no supported needed.
This is a remix of JC's modular riser system. Three major changes i made: 1.) increased height, so it can be use with Extruder fan mount 2.) LED mount for the betweeners 3.) now use M3 screw&nuts for the pin, no more pin dropping and…
For English please roll down. CZ: Přepracovaná verze odklápěcího víka pro Original Prusa Enclosure Vlastnosti: nový systém zámků víka není potřeba otáčet víko = hladší víko bez závitových výstupků, ideální pokud používáte pro odkládání…
This box is easy to print, can be customized as you prefer with OpenScad
A small, hinged case for a DVD or CD. STEP files available
This is a shell replacement for the launch model Nintendo DS (NTR-001 aka DS Phat) that also removes the hinges. This is a hingeless design. The top screen will not fold down. The original DS console is known to have plastics that have…
I loved the OP's Fusion 360 design and made some modifications. The hinge design is ingenious and fully parametric, but the design would break under certain circumstances. I made the following changes: Magnets can be sized up to 10mm…
Remix of the Centauri Carbon screen cover adding a basic hinge so you can open and close it without having to take it off, use cutoff pieces of filament for the joints, press fit onto the screen, make sure to mount it with the hinges on…
Just practicing with Fusion 360 parametric design. - this box can be sized up or down as needed
I was looking for clips to secure the lids on some of my IKEA Samla boxes and came across many, including this one by Canislupus . I really liked the idea of the design but there were a couple of things I wanted to change so I remodelled…
This is a wooden door for your dungeon. There is a print in place version with working hinges and an opened and closed version if you don't want to mess with print in place hinges. The two split versions can be printed flat and glue…
A design I started to create custom compartmented boxes. Easy to change the size via Change Parameters (fx on the toolbar) inside Fusion360. Make changes to the “Insert” sketch to make custom, removable inserts or just modify the “Shell”…
Customized version of https://www.thingiverse.com/thing:82533 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=82533 Print instructions Category: 3D Printing Tests Instructions Using the following…
I was playing around with my CAD system and hours later a barrel fell out of my 3D printer. Yes, this happens more often then you might think… This is a barrel with a hinged lid. It has a diamenter of ~110mm and a height of ~125mm. The…
There is no shortage of covers for the Mean Well LRS-350 power supply, but I couldn't find one that was quite what I was looking for, so I decided to create my own. 2019/09/24: Added Fusion 360 Source Files Print instructions This design…
These deck boxes are hinged and have a latching feature that allows you to open them by pushing the button on the front of the Pokeball. Print a base, top, hinge, and button for all versions. The great ball requires additional “Great Ball…
![Bag clamp [hinged, print in place]](https://media.printables.com/media/prints/105292/images/1053826_e7a5ac4a-64f8-479b-b231-845b38703a23/clipping.png)
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
