Search results: hoe

Sort order

3,412 models

P
PrintablesCodeName X

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
3,536
Likes
1,114
Rating
4.9
P
Printablesecoiras

Big Shoe Horn

This is a remix of "shoe horn | no support" by cashew675, which you can find here: https://www.thingiverse.com/thing:4119614 I liked the original design very much and especially the fact that it could be printed on the side, as this means…

Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,226
Likes
299
Rating
4.76
P
PrintablesjonnieZG

Modern Elegant Designer Chess Set - "Phoenix"

About I have envisioned this chess set for quite a while, inspired by fire and steel. Since I was limited to plastic as a medium, I experimented with the board’s texture and surface patterns to achieve a metallic shine. For the black and…

Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant

Downloads
1,952
Likes
556
Rating
5
P
PrintablesDarius V

Modular Sliding Shoe Size Ruler (EU/US)

This 3D printable shoe sizer features a two-part sliding design that measures foot length in both EU (left) and US (right) sizing systems. The base unit covers up to EU size 27. For larger feet up to EU size 46, simply print the optional…

Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant

Downloads
1,407
Likes
760
Rating
5
P
PrintablesMajlen

Shoe organizer

Jednoduchý a přitom funkční. Nutno přizpůsobit rozměry (já tisknu x 180, y 100, z 75 - na fotce boty vel.37).

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant

Downloads
1,081
Likes
137
Rating
5
P
PrintablesJB

Hot Shoe Cover minimalistic (internal flash working) V1.4

I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
1,043
Likes
125
Rating
5
P
PrintablesRatasich

Cold Shoe (for Storage Cheese Plate)

Designed for the Storage Cheese Plate , this print can be attached with a single ¼" screw .

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
975
Likes
56
Rating
5
P

GoPro Hero 10 (9) Battery Cover | Cold Shoe Version available

GoPro Hero 10 (9) Battery Cover | Cold Shoe Version available Simple and fast to print cover for the GoPro Hero 10 (and 9) to allow charging while recording. Useful for long video recordings or time lapses. The Cold Shoe variant is useful…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
852
Likes
104
Rating
5

Running shoe keychain (Nike)

A simple keychain of a running shoe. Modeled using a picture of the Nike Air Zoom Pegasus Here is a similar model of a Saucony and Adidas running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
828
Likes
85
Rating
4.67
P
PrintablesWP_Master

Montessori kids game "Lacing Shoe"

Model inspired by wooden lacing shoe. Great oportunity how to use your printer. Kids will be happy. No extra printing instruction. Print without supports, 10% infill, add 3 perimeters for extra durability. Two colors for bottom part are…

Print approx. €3.52–€4.30 excl. taxPreliminary estimate for one variant

Downloads
590
Likes
223
Rating
4.83
P
Printablescarlascreashuns

Wooden Clog Shoe Dolls

A scan from thingiverse: thing:341835 I changed the shape and size to fit a Build-a-Bear. For the 12" doll or American girl doll shoe, I shrunk down the size of the clog and then erased enough of the inside that it will slip onto a dolls…

Print approx. €4.79–€5.85 excl. taxPreliminary estimate for one variant

Downloads
553
Likes
76
Rating
5
P
PrintablesIng. Ákos

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
452
Likes
40
Rating
5

Running shoe keychain (Adidas)

A simple keychain of a running shoe. Modeled using a picture of the Adidas Duramo SL Here is a similar model of a Saucony running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can customize the slicing…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
410
Likes
61
Rating
5
P
PrintablesDenver

Wall shoe rack / holder for Command Strips

Thanks for the original model goes to @SickSadWorld_260233 This printed well for me in PETG at .20mm and 25% infill.

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
309
Likes
81
Rating
5
P
Printablesrtm

Shoehorn with a salmon tail

It's a salmon season here in the Pacific Northwest. It's always a good idea to have a shoehorn with you on the river, where you'll be changing your boots at least couple of times. I've designed and printed this shoehorn to keep it in my…

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
266
Likes
26
Rating
5
P
PrintablesNeva

Shoe dryer (no supports needed)

no supports needed, just use some brim

Print approx. €4.61–€5.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
260
Likes
100
Rating
5
P
PrintablesOneKaidou

Hot Shoe Cover - Sony ILCE-7RM3

This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on the Sony ILCE-7RM3 camera. Its probably also fits on any other of their cameras as well though. This model is designed to be printed standing upright…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
16
Rating
4.8
P
PrintablesKmanSweden

Ooni Karu 12" shoes

Shoes to help keep your Ooni Karu pizza oven from not slipping off the table. I'll use doublesided tape and a screw to fasten. General shape from thing:4629146 by Tom7688.

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
9
Rating
0
P
Printablesateldsign

Horseshoe magnet, neodymium magnets inserted

Magnets in the shape of the iconic horseshoe magnet. Neodymium magnets are inserted during the print. I have two versions here, one for Diam.6mm x Height 8mm magnets, the other for Diam.5mm x Height 2mm. The 3mf files are all set with the…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
17
Rating
0
P
PrintablesPavel

horseshoe cookie cutter / vykrajovátko podkova

A horseshoe is said to be a symbol of luck, so it probably shouldn't be missing among the cookies. you can make the nail heads yourself when you use a skewer to remove the dough from the cutter :) podkova je prý symbol štěstí, tak by asi…

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
152
Likes
16
Rating
0
P
PrintablesRaymond Ernst

Pentax Flash Hot Shoe cover

Cover for all pentax dlsr cameras, with a fixed hot shoe

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
5
Rating
5
P
PrintablesFrogg

Very very tall monster high doll shoes

Monster high doll shoes, 136.982 mm tall

Print approx. €2.84–€3.48 excl. taxPreliminary estimate for one variant

Downloads
126
Likes
18
Rating
0
P
PrintablesJirka B

Shoehorn half-moon hanger

Simple shoehorn hanger. Two variants - one with hole for screw and second one without it. Recommended print settings Resolution: 0.15 Supports: No

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
11
Rating
0
P
Printablesa123qwertz567

Remix of Leifheit Click System Holder by DirkHoefle

I wanted to store some of my Leifheit cleaning equipment on a wall or under a cupboard. So i searched for printable mounts. I found the mount provided by DirkHoefle and printed it. Unfortunately it broke for me on second use because PLA…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
9
Rating
0
P
PrintablesThunfischToni

Shoe Stacker

This is my attempt at designing a supportless shoe stacker with low filament usage. PLA compatible! I plan to play around with the thickness of the walls/ceiling, to see how low I can go before it gets unstable. I also want to make a…

Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
11
Rating
5
P
PrintablesPeter Farell

Echoes of the Divine : Carved Ivory : India

Echoes of the Divine Artist Unknown Classical Indian Temple Sculpture This work captures the profound grace and spiritual symbolism characteristic of classical Indian art. The figure, a celestial being, stands in the elegant tribhanga…

Print approx. €3.94–€4.82 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
31
Rating
0
P
PrintablesCG0072

X-Carve Dust Shoe glass

A model to exchange the glass in the Dust Shoe.

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
80
Likes
11
Rating
0
P
PrintablesJadozub

Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix

This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
6
Rating
0
P
PrintablesMechLink

New Holland B95 backhoe latch

New Holland B95 backhoe window hinge latch. I add material to the rear pin hole to help strengthen it, the factory one tends to break in this spot. I recommend 7 perimeter on this print for strength and print it with PET. PLA is to weak…

Print approx. €8.69–€10.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
68
Likes
8
Rating
0
P

Easy to print shoe charm catapult

Hi all, Thanks for downloading this shoe charm catapult. The model is simple printing-wise, just one part so no assembly is required. The printer settings are still a work in progress I'll update them in the future. The settings below…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
13
Rating
5
P
PrintablesBobino

AB4 Tool for learning how to tie shoes

You can tie shoelaces to this print as you would to the normal shoes to practice tying knots and loops. Printing: This is an easy print that does not need supports. I would suggest to use higher perimeter count to add rigidity - around 5.…

Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
21
Rating
0
P
Printablesgrejvl

Cold Shoe to SmallRig 1/4" Adapter

This is a cold shoe to SmallRig 1/4" adapter , designed to let you securely attach any cold shoe accessory (like microphones, lights, or monitors) to your SmallRig rig or other equipment with a 1/4” screw mount. The design is compact,…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
4
Rating
0
P
PrintablesKPV

HDZero Goggle Rail Cold Shoe Mount

Addition for the HDZero Goggles, to add a cold shoe mount via the front rails. Enables you to use cold shoe compatible microphones such as the Rode VideoMicro. There are two files, as the cold shoe mount is rotated 7.5 degrees relative to…

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
1
Rating
0
P
PrintablesMichael

Glücksbringer LineArt Hufeisen / Talisman / lucky charms Horseshoe

sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
13
Rating
5
P
PrintablesFalco

IKEA Shoehorn holder.

Filament : GST 3D. Pla+ Support : None. G code. with All top-Ironing.

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
6
Rating
0
P
PrintablesFuturaprint

The Windshield De-icing Scraper: Power and Efficiency Inspired by a Backhoe Shovel!

Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…

Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
12
Rating
5
P
Printables3DJG

Lucky horseshoe Tensegrity

I hope riding this tensegrity brings you good luck, pal! Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. The pieces fit together tightly, but depending on printing tolerances you may need…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
8
Rating
0
P
PrintablesJP

SHOEI GoPro Shin mount (no glue)

You just need to plug it into the lower small air vent of your SHOEI helmet (all newer versions seem to have the same front and air vents. As shown i jused the SHOEI TC-10. For easy removal you just need to press the sides close to the…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
6
Rating
0

Stackable Shoe Rack

This shoe rack was designed to perfectly fit panels or boards with a thickness of 12mm and a depth of 33cm. Due to the limited print area of my Prusa printer, each bracket consists of 2 parts. The parts fit together so well that gluing is…

Print approx. €9.54–€11.66 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
15
Rating
0
P
PrintablesSaSch

Cold Shoe Adapter/Stand Canon to Osmo Pocket

For a small video production with a telephoto lens on the Canon R (on a tripod), I needed an adapter for the DJI Osmo Pocket to be able to film the wide shot at the same time. I found a solution on Cults3D at User “ 3D-Designs” , which…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
3
Rating
5
P
PrintablesMykashy

Shoehorn Holder | Držák na nazouvačku

Český popis Tento držák na nazouvací lžíci je praktickým doplňkem pro předsíň nebo botník. Udrží vaši nazouvací lžíci vždy na svém místě, takže ji už nikdy nebudete muset hledat. Model je navržený pro snadný 3D tisk bez podpěr. Lze jej…

Print approx. €5.28–€6.45 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
4
Rating
0
P
PrintablesZapster

IKEA Shoe Cabinet Drawer Guide/Stopper Plug

I bought and old IKEA shoe cabinet (probably an old version of the Hemnes cabinet ) to remodel it into custom one that better fits into the room. While the cabinet was in a good general shape, many of the little plastic plug that guides…

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
5
Rating
5
P
Printablesbart

Ooznest Workbee Z1+ quick-swappable magnetic dust shoe v0.3

Intro This is an updated and modified version of my previous Workbee dust shoe . The previous version had a wing nut sticking out of the side (which I found a bit annoying although it wasn't hitting the Workbee frame) and the attachment…

Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
4
Rating
0
P
PrintablesJamie

Sony Multi Interface Shoe Cover and Lapel/Lavalier Microphone Clip

A cover for the Sony Multi Interface Shoe that allows for a Lapel microphone to be clipped on and attached. Protects the digital pins by covering them. The cover does not touch the pins at all. Should work with all lapel microphones with…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
4
Rating
0
P
PrintablesFlashL

Shoehorn OMTÄNKSAM mount

Wallmount for the best shoehorn from IKEA.

Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
5
Rating
0
P
PrintablesDoctaylor

IKEA Ställ shoe cabinet peg

Replaces broken or damaged ikea Ställ retaining shoe cabinet bracket pin peg. Printed at 45 angle with 5 layer walls

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
3
Rating
0
P
PrintablesDracoMalfoy

Shoe Stars

Bling out your shoes with shoe stars!

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
11
Rating
0
P
PrintablesPaulo

Laser Rangefinder Cold-shoe Holder

I wanted to have a mini laser rangefinder to carry along with my Zeiss Ikon Nettar and I didn't want to use the included mini strap, so I designed it to hold it and use it at the same time to properly focus the camera. My design was based…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
3
Rating
0
P
Printablessteffanders

Shoehorn wall bracket

We got a new shoehorn which was too to big and too beautiful for the drawer. It is a famous i.e. amazon article which you can get in different length and from different sellers. It must be fixed like a sculpture and easily accessible for…

Print approx. €5.19–€6.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
4
Rating
0
P
PrintablesCed59670

Shoe Hook – Footwear Carrying & Drying System

Shoe Hook – Footwear Carrying & Drying System Wet, dirty, or bulky shoes often end up taking space in a backpack, lying on the floor, or cluttering a garage or entryway. The Shoe Hook is a simple 3D-printed system designed to carry,…

Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
7
Rating
0
P
Printablescerydzik

TuK shoe Heel

I have updated with all the Files I have for Boot Heel Replacement for TuK Boot/Shoe Some I have Printed on Resin, some on FDM Print Settings Printer: PrusaMK3 Rafts: No Supports: No Resolution: .2mm Infill: 100% Notes: plan to testing…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
0
P
PrintablesPomi

Stopper for a tilting shoe rack (Sconto).

Printed using PLA with 4 perimeters. Use superglue to bond the plate and the pin.

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
8
Rating
0
P
PrintablesYamiGhor

VanShoes

Are you tired of stinky shoes inside the Campervan? Are you tired of leaving outside and put on your weat shoes because the puddle of the night rain? You don't want insects on your shoes? NO PROBLEM! You can install the VanShoes to your…

Print approx. €5.10–€6.24 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
3
Rating
0
P
PrintablesMaWoKo_3D_Druck

Wall hoes with inscription field / Wandhacken mit Beschriftungsfeld

Hey, wall hoes with lettering field were urgently needed in our company because otherwise we are looking for the keys. printed with a 0.4mm nozzle on 0.20 structural with organic supports Have fun Hey, Wandhacken mit Beschriftungsfeld war…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesJC

IKEA BEKVAM Stool “Shoes” 506.110.22

IKEA BEKVAM Stool “Shoes” 506.110.22 I wanted something more than just wood on the bottom of the feet. I created these shoes. I used a digital protractor to get the angles exact. Has some crazy compound angles. Luckily all 4 legs are the…

Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
3
Rating
0
P
PrintablesCalebTimoteo

Joaquin Phoenix Joker Bust - Joker Figures

Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…

Print approx. €33.85–€41.38 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
2
Rating
0
P
PrintablesChorchie

Cold Shoe Monitor Mount for homemade teleprompter

This model is designed to use this monitor from Amazon: https://a.co/d/0rkTGwB And this cold shoe adapter: https://a.co/d/13R9GcO I use this phone tripod mount to hold the phone and to provide the front cold shoe to hold the monitor…

Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
PrintablesJordi

Shoe organizer

Organizer for shoes. 2023-02-17 Added versions with holes that should print fatser and use less material. 2023-02-26 Added a version of the model without a base.

Downloads
24,950
Likes
8,604
Rating
4.93

Crocs Shoes - Fully 3d-printed

Fully 3d printed crocs shoes “CrocsL/R” and “Holder” printed with Overture TPU ( https://amzn.to/40n8I0D) (390 g) for the shoes I used: 2 walls 15% infill (gyroid) for the holder 2 walls 5% infill (monotonic) “Mount1/2” printed with PLA…

Downloads
24,163
Likes
3,530
Rating
4.87
P
PrintablesBowedFurball

3d printed Running Shoes

3d printed running shoes that you can wear Use TPU filament

Downloads
18,542
Likes
2,529
Rating
4.4
P
PrintablesAlbeart3D

Mini Shoe Horn (Last meters | no support)

Mini compact shoe horn to clip on your shoes and protect them, easy to to print and slip in!

Downloads
12,063
Likes
2,522
Rating
4.97
P
PrintablesPrintThatBoii

Cute Christmas tree with shoes

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the…

Downloads
8,911
Likes
2,282
Rating
4.95
P
PrintablesCarWalkerMail

Air Jordan One / 1 - Finger Shoe

Finger diameter at base is 17 mm. Scale a model so that it suits your needs! High Quality OBJ - mm

Downloads
7,860
Likes
750
Rating
4.85
P
PrintablesPhD3DP

shoe horn | no support

Shoe horn design taught by Kevin Kennedy Except the side is cut flat and chamfered for no-support 3D printing. One reason to add yet another shoe horn is that the exist ones are either too short or need support or need post processing.…

Downloads
7,093
Likes
623
Rating
4.97
P
PrintablesCalebTimoteo

Cute Christmas tree with shoes (print in place)

Completely print in place. No breaking it loose, no supports. Added a tree with a star and an ornament tree Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) Scale it as you like :) Legs from the famous Zou Ghost model by Tower of Creation!…

Downloads
7,048
Likes
1,407
Rating
4.86
P
Printables3D Print Life

Waverrior - 3D Shoes

Waverrior - 3D Shoes by Dhafinrezky on Thingiverse

Downloads
6,316
Likes
1,015
Rating
4
P
Printablesfifindr

Shoe Horn

A compact shoe horn designed to help slide your foot into a shoe more easily. Place the tool over the heel area of the shoe, slide your foot in, then simply pull the shoe horn out. Useful as a small everyday helper for sneakers, casual…

Downloads
6,075
Likes
1,403
Rating
4.97
P
PrintablesMZ4250

Phoenix

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
4,745
Likes
379
Rating
4.75
P
PrintablesHeber

Barbie Doll Shoes

This pair of Barbie heels began as a special request from my granddaughter, who wanted new shoes for her collection. Choose your favorite color and scale the model in PrusaSlicer to fit your doll’s foot size. Printing Instructions…

Downloads
4,724
Likes
303
Rating
4.64
P
PrintablesMZ4250

Dragon Phoenix

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
4,016
Likes
620
Rating
4.69
P
PrintablesVinors3DLab

Side Lace Lock – No‑Tie Shoelace Holder for the Last Eyelet

A lightweight, ultra‑compact and efficient system designed to lock your shoelaces without tying a knot . These side lace locks attach directly to the last eyelet of your shoe (one on each side) and guide the lace through a multi‑stage…

Downloads
4,002
Likes
1,640
Rating
5
P
PrintablesC1RKT

Rugged Shoe Clip Hangers

A supper strong option to keep your footwear off the ground! This shoe hanger is designed to fit most shoes including your flip-flops! Here's a cool cost-effective remix by @PRIma:…

Downloads
3,624
Likes
1,780
Rating
4.97
P
PrintablesFabioGhiro

Fast Shoes Organizer

NEW VERSION AVAILABLE! Thank you very much for your feedback. I’ve created version 2 of this shoe organizer, which now features a clasp to keep the top in place. Keep writing for more suggestions! ADDED MK4 PROFILES! (slower than a…

Downloads
3,447
Likes
1,505
Rating
4.88
P
PrintablesProgrammaDan

Nighthawk & Phoenix FPV Drone

ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…

Downloads
3,399
Likes
593
Rating
5
P
PrintablesPower Jojo

Nike Airforce 1 shoes for Dummy 13/Lucky 13

Nike Airforce 1 shoes for Dummy 13

Downloads
3,048
Likes
450
Rating
5
P
PrintablesSbardesign

Shoe Organizer Honeycomb

As the original design, it's made to fit in most printers, with at least 220mm bed.

Downloads
3,035
Likes
435
Rating
5
P
PrintablesZachMods

Flexible Flip Flop Shoe!

This model is designed to be printed in flexible filament to make a flip flop that is US Male size 10 . You can scale the model to make it smaller or larger to fit your foot. I recommend using 5% infill or less. The less amount of infill…

Downloads
3,018
Likes
429
Rating
4.83
P
PrintablesV1 Engineering

Makita 701 / AutoSpin T1 Tool Mount and Dust Shoe for the LowRider 4 CNC

Tool mount and dust shoe for the Makita 700 series palm router or the Sienci AutoSpin T1 and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the…

Downloads
2,957
Likes
157
Rating
5
P
PrintablesHow To Homemade

Slide Shoes | Fully 3D Printed TPU | Wavy Sole

Fully 3d printed slide shoes , remixed from MakerVerse Designs printed with TPU (I used eSun eTPU-95A Rainbow ) probably TPU 90a or so is more comfortable, but also more difficult to print My print settings: Infill: 10% Infill Pattern:…

Downloads
2,872
Likes
431
Rating
4.83
P
Printables43D PRINT

Shoe holder organiser

Shoe holder organiser Print settings 0,2mm layer 5 walls 15% infill no supports

Downloads
2,705
Likes
855
Rating
4.5

Hot Shoe Cover

Standard camera hot shoe cover. Some cameras like my Nikon D850 and D750 do not come with a hot shoe cover, and the original manufacturer part is around 10 bucks each - for a tiny piece of f-ing plastic. I know there are numerous other…

Downloads
2,629
Likes
263
Rating
4.89
P
PrintablesHitMxrker85

Custom Flexible and Breathable Shoe Insoles

Shoe insoles incase yours arent cutting it, are damaged, or lack breathability etc.

Downloads
2,501
Likes
382
Rating
4
P
PrintablesArt3Design

Nike Air Jordan Shoes Keychain

If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:

Downloads
2,461
Likes
151
Rating
4.71
P
PrintablesFLEX.53

Shoe Hanger - Organize All Your Shoes Space Efficient

Choose between 3 hook sizes and 2 main body sizes. Features: Rotatable hook: The shoe hanger has a 360° rotating hook that offers you maximum flexibility. Easily adjust the orientation of the hanger to make the most of the available…

Downloads
2,394
Likes
1,363
Rating
4.94
P
PrintablesV1 Engineering

Makita 700 Series Mount and removable dust shoe for the LowRider 3 CNC

Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the hose zipped in initially but it will soon conform to the curves…

Downloads
2,360
Likes
107
Rating
5
P
PrintablesFilarte3D

Modular Shoe Rack

~ VERSION 1 ~ The idea of this design is that with 2 different 3d printed models and some ø16mm PVC tube you could make your own size shoe rack that fits your needs. You will have to: 3D print 2 units of each model (2 units Part-A + 2…

Downloads
2,222
Likes
803
Rating
4.86
P
PrintablesOld Lady

Shoes of Hermes, messenger of the gods

A humorous addition to your footwear or your base cap - just for fun. Please check beforehand whether the print matches. With genuine Crocs, the wings will only fit if you loosen the strap fastenings and use longer screws.

Downloads
2,125
Likes
943
Rating
5
P
PrintablesJP

Canon EOS Hot Shoe Cover

Hot shoe cover designed to fit Canon EOS cameras perfectly. A variant better suited for Canon FD cameras can be found here . Print Settings Resolution: 0.1 mm Infill: 100%

Downloads
2,120
Likes
233
Rating
5
P
Printablesdodasch

Shoehorn

print in 0.2mm layer height, with PETG, maximal perimeters, align your seam and some brim around it 11.08.2023 UPDATE: added V2 / smoother geometry

Downloads
2,032
Likes
125
Rating
4.63
P

Doll House Turtle Sandbox with Shovel, Rake, and Hoe

🐢 I like turtles!!! Here's a shot of nostalgia for ya! Now your dolls can enjoy some sandbox play with this Little Tikes Turtle Sandbox look-alike! Now with a Shovel, Rake, and Hoe! This makes a great stash box for goodies, too! Do you…

Downloads
1,995
Likes
640
Rating
4.79
P
Printablesfifindr

Shoe Organizer

A practical shoe organizer designed to maximize storage space by allowing one pair of shoes to be stored vertically. Perfect for closets, wardrobes, entryways, or shoe cabinets where space is limited. The organizer features textured…

Downloads
1,992
Likes
789
Rating
5
P
PrintablesGut Shot Games

StageTop 4 Deck Card Shoe

The StageTop 4 Deck Card Shoe is a token of appreciation for those interested in our crowdfunding campaign and accessory for StageTop 2: 3D Printed Gaming Tables . While made as an accessory for StageTop Encore Gaming Tables, this 4 Deck…

Downloads
1,984
Likes
177
Rating
5
P
PrintablesUloPe

Stackable Shoe Rack (metric version)

Side panel to construct a (stackable) shoe rack from 18x200mm wood boards. Fits exactly on an MK3(S) printbed. The model is customizable on OnShape via variables . This is a re-model for metric wood boards of the original:…

Downloads
1,975
Likes
753
Rating
4.94
P
Printablesgimpelginster

Barefoot Shoe Sneakers

Versions April 2nd 2026: v2.12 improved geometry on the outside of the foot (less buckling) better print orientation and support placement Opening the Project I'd recommend downloading the .3MF project file and opening it in PrusaSlicer.…

Downloads
1,941
Likes
653
Rating
4.75
P
PrintablesAndrea Loddo

football shoe keychain

Couldn't find a soccer shoe keychain so I decided to create it myself. I used an already existing shoe model and added the ring. Use tree supports touching the bed. Category: Accessories

Downloads
1,903
Likes
117
Rating
4.83
P
Printables3DDIY

Stackable Shoe Rack

Download link is broken and thingiverse is not fixing it. To download, go below the thumbnails there is the section "thing files". Click on that and download the STL there. Hi Everyone, This is a shoe rack design based off of my Monitor…

Downloads
1,844
Likes
699
Rating
5
P
PrintablesGiantBrain

Lucky 13 Nike Shoes – Sneaker Accessories

Small shoes. Big style. Give your LUCKY 13 figure a fresh look with a pair of Nike-style shoes. These small sneaker accessories add a distinctive finishing touch to your figure's outfit. The download contains the shoes only. The LUCKY 13…

Downloads
1,770
Likes
410
Rating
4.93
P

Phoenix - MGM Print-Ready Mini

Phoenix - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Wreathed in eternal, elemental flame, this majestic Phoenix rears back with wings fully outspread to unleash its fiery rebirth upon the battlefield. This titanic avian avatar serves…

Downloads
1,734
Likes
326
Rating
5
P

OpenRun - shoe last, size 42

Do you want to make your own DIY running shoe? Use our shoe last. For more sizes and all instruction visit: www.openfootwear.com

Downloads
1,678
Likes
69
Rating
0
P
Printables川

Tora barefoot shoes

size chart: --- Filament: Recreus 82A, 3Dfils 85A Use TPU 95A first --- Orca Slicer / Bambu Studio settings: Global - layer height: 0.2mm - line width sparse infill: 0.6mm - wall loops: 0 - top shell layers: 0 - bottom shell layers: 0 -…

Downloads
1,674
Likes
247
Rating
4.8