Search results: holds

Sort order

516 models

P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Downloads
16,512
Likes
4,050
Rating
4.93
P
Printablesmchangcreative

Playing cards holder for IKEA Skadis (holds 10 decks)

I created this model so my daughter could store and display her 30+ decks of playing cards. Each holder shelf holds 10 standard-size decks. By my estimation, you can fit at least 8 holders / 80 decks on the 22x22" IKEA Skadis and 4…

Downloads
288
Likes
152
Rating
5
P
Printableskyleireland

DJI Tello Drone Battery Holder - Holds 4

What this is A very basic four battery holder for holding DJI Tello batteries. Could be handy for those wanting a way to hold some DJI Tello Drone Batteries. I designed this quickly in Fusion360. The batteries sit loosely and move a bit,…

Downloads
39
Likes
2
Rating
0
P
PrintablesREMLURELMI

W.O.R.D.32 - Workshop-Organized Repository of Drivers (holds 32)

Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.

Downloads
22
Likes
4
Rating
0
P
Printablessrirachachacha

Multi Time Zone Clock Housing with Labels — Holds Three 90mm Insert / Fit-Up Clocks

Multi Time Zone Clock Housing with Time Zone Labels and Stand --- Fits three 90mm (3.5 Inch) fit-up / insert clocks. Model includes various time zone labels that can be attached underneath each of the clocks. Has a removable stand for…

Downloads
10
Likes
1
Rating
0
P
PrintablesJerry Lee

Playing card holder - holds 20+ cards

5/24/24 - Updated: added a new version where 2nd row of cards sits 10mm higher. Playing card holder. Help young, old and any players hold 20+ cards without straining your hands. Printed in any filament with no supports.

Downloads
3,936
Likes
388
Rating
5
P

Modular Robot Vacuum Door Ramps for door thresholds

Summary This modular ramp allows robotic vacuum cleaners to easily overcome door thresholds and small height differences. The individual segments can be flexibly combined to achieve different widths. Key facts For overcoming door…

Downloads
3,613
Likes
2,285
Rating
4.94
P
PrintablesBSP.Creations

Tri-Holder - Holds Your Phone At 3 Different Angles

This phone holder is designed to hold your phone vertical or horizontally at three different angles: 60, 70 or 80 degrees. The holder comes in 2 different models, the lightweight or infilled model. The lightweight model prints on its side…

Downloads
2,698
Likes
389
Rating
4.88
P
PrintablesMateusz Tokarz

Philips OneBlade Stand & Organizer | Holds Combs

BOM: Printed with ROSA3D Starter PLA Black Keep your grooming kit perfectly organized with this custom-designed stand for the original Philips OneBlade shaver. Instead of leaving your shaver and its delicate attachments scattered on the…

Downloads
2,221
Likes
634
Rating
5
P
Printablesjs500

Insert / Organizer for Earth Board Game - Also Holds Kickstarter Extras

This is an insert / organizer for Earth, including the Kickstarter upgrades (wooden soil tokens, wooden leaves, wooden active player token, and calendar cards). It all fits in the base box, has no lid lift, supports premium sleeves on the…

Downloads
1,932
Likes
277
Rating
4.97
P
PrintablesBMO_FUSE

Not Enough Crimps Sample Pack Climbing Holds

A sample of my upcoming paid pack of climbing holds There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :) Sample Crimp 1 A medium size crimp with a moderate amount of incut but a small edge…

Downloads
1,844
Likes
261
Rating
5
P
Printablesjs500

Spirit Island Insert / Organizer - Holds All Expansions Through Nature Incarnate

Update December 26, 2024 : I have received multiple reports that recent printings of the base game box are slightly smaller than the copy I used to create the original version of this insert. I created a new version that you can print if…

Downloads
1,446
Likes
193
Rating
5
P
PrintablesCasper

Dyson Airwrap Shelves - Holds seven attachments

My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…

Downloads
1,334
Likes
158
Rating
4.75
P
PrintablesTony Virelli

Covert ZYN Can - Small Box That Holds An Entire ZYN Can!

Please Share Your Makes and Give It A Like! I have a friend who loves ZYN, however, he said he doesn't like the fact that the can shows in his pocket all the time, plus with all the other “everyday carry” stuff he has, the ZYN can takes…

Downloads
1,275
Likes
106
Rating
5
P
PrintablesPrusaUser

Paracord Pulley (100% Printable, Holds 200+ lbs)

Introducing the ultimate solution for your camping and outdoor needs – the Super Strong 3D Printable Camping Pulley! Designed for durability and versatility, this pulley is perfect for a variety of tasks, from setting up tents to creating…

Downloads
1,211
Likes
720
Rating
4.11
P
PrintablesCraig Eaveson

Beyblade X case - holds 3

Here is version 2 - https://www.printables.com/model/1431172-beyblade-x-case-holds-3-v2 My eldest son has got into the Beyblade X scene, he's doing a 3 against 3 comp this weekend so made him a case for when he goes and thought I'd share.…

Downloads
988
Likes
84
Rating
4
P
Printablesjs500

Quest for El Dorado Insert / Organizer (Lautapelit Edition) - Holds All Expansions and Promos

This is an insert / organizer for The Quest for El Dorado (Lautapelit Edition), with Heroes & Hexes; Dangers & Muisca; Dragons, Treasures, & Mysteries; and Promo Packs 1-3 (but not Golden Temples). I'm told that it also works with the…

Downloads
981
Likes
100
Rating
4.92
P
PrintablesBuildX

#0067 Collapsible Compact Cup Caddy [Holds 2, 3, or 4 cups]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** When you need to make a boba, coffee, or beer run for you and your group while…

Downloads
976
Likes
462
Rating
5
P
Printablessad_salad

Keurig K-Cup Holder - Holds up to 25 kcups

A simple Keurig K-Cup Holder - Holds up to 25 k-cups. Printed upright with tree supports.

Downloads
905
Likes
108
Rating
5
P
PrintablesD.S. Prints

Strong Shelf Support V1-2 - Holds 30lbs! (Tested)

Test Information I tested this hook using PLA+ at a 15% infill. I used a 20mm wood screw. 30lbs of resistance before breaking. Theoretically, using 4 or 6 supports (recommended) you could get up to 180lbs of bearing weight. Print at a 50%…

Downloads
878
Likes
412
Rating
5
P

Rising Sun Kickstarter-like - Strongholds | Turtles | Flags | Alliance Markers | Dynasty Invasion

So you like Rising Sun Board Game? Do you think too that cardboard strongholds, turtles suck? Print this kickstarter-like-ish addons for your Rising Sun game! Turtle has been remixed from Snapping Turtle by xinghcy0311

Downloads
854
Likes
58
Rating
4.83
P
Printablesjs500

Wingspan Nesting Box Insert / Organizer - Holds All Current Expansions and Room for More

Update February 4, 2026 : Today I posted an updated version of the Nesting Box insert to accommodate everything through the Americas expansion. You can view the new version of the insert here: I left the original version posted here in…

Downloads
782
Likes
197
Rating
5
P
PrintablesPrinting Panda

Sewing Machine Seam Guide with Double Magnet Slot - Keeps Fabric Straight & Holds Sewing Pins!

I designed a new version of the seam guide with two magnet slots. This one has a 5mm-wide edge to hold down thicker or fluffy fabric while sewing. I also found that with strong magnets, it works as a pin holder too! Here’s what it does:…

Downloads
732
Likes
207
Rating
4.9

Pocket Scroll Keychain - holds 80cm of paper easy roll-up

Thanks for checking out the Pocket Scroll Keychain! The Pocket Scroll is only 6 cm long but packs enough power for a detailed diary, ultimate shopping list, or ninjutsu summoning. It won't unroll on it's own and it's easy to remove a…

Downloads
727
Likes
342
Rating
5
P
PrintablesCDoucet

Kit Card - House (holds business card) - Real Estate

The back of the house is perfect to add your logo onto, just do it it your slicer of choice! This is the perfect promotional item to give to potential clients as a contractor or real estate broker! Make sure your printer and filament are…

Downloads
722
Likes
149
Rating
5
P
Printablesasteven5

Spice Rack (Holds 16 Regular Spice Jars)

This spice rack will hold 16 regular spice jars like those sold in supermarkets (e.g. Schwartz, ASDA etc.) Jar dimensions: diameter ~44mm, height up to 12cm. The rack is designed with very tight tolerances, as I didn't want to use glue on…

Downloads
709
Likes
109
Rating
4.8
P
Printablesjs500

Terraforming Mars: Ares Expedition Insert / Organizer - Holds Discovery, Foundations, and Crisis Expansions

This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…

Downloads
667
Likes
136
Rating
4.9
P
PrintablesJan Štech

Climbing Holds

Print the climbing hold with a sufficient number of perimeters and infill to ensure extreme strength. Each hold is attached to the wall using an M10 screw and washer.

Downloads
663
Likes
180
Rating
4.83
P
Printablesjs500

Quacks of Quedlinburg Insert / Organizer - Holds GeekUp Bits & Bags, Herb Witches Expansion

This is an insert / organizer for Quacks of Quedlinburg, the full Herb Witches expansion, the locoweed recipe books and general fortune cards from the Alchemists expansion, the BGG GeekUp bits, and the BGG GeekUp bags. It has no lid lift,…

Downloads
647
Likes
125
Rating
5
P
Printablesdanid

Bit Storage Box – Holds 60 Bits (12x5) – Compact Organizer For Bits

I got tired of my bits rolling around everywhere, so I designed this simple storage box. It holds 60 bits in a 12×5 layout and keeps them neat, secure, and easy to grab. Prints in place – no assembly or extra hardware needed Nice snug fit…

Downloads
646
Likes
233
Rating
5
P
PrintablesMediaMan3D

Big Bambu Poop Box - Holds Over 1,000 Filament Changes

Update 3-13-2023: By request I updated the Honeycomb-Ribs Big Bambu Box to use eight 8mm x 3mm magnets. Update 1-10-2023: Updated the Honeycomb-Ribs Big Bambu Box with 6mm x 2mm magnet to have spots for 8 magnets. Update 1-3-2023: By…

Downloads
586
Likes
87
Rating
5
P
PrintablesBalloonActivity

Extended Wire Cutter/Plier Holder for the Multiboard (Holds 5)

Used with multiboard: https://www.multiboard.io Extended remix of https://www.printables.com/model/704739-dual-wire-cutterplier-holder-for-the-multiboard that has five slots. It slots into two octagonal holes for better stability.

Downloads
582
Likes
83
Rating
4.56
P
Printablesstevensaero

Bambu Lab P1P – SD Card Display Bezel (holds microSD to SD card converter)

*************** UPDATED B-Model .stl 2-28-2023 The “B” model variation of this file moves the SD card holder slightly right and adds a 2mm pass-through hole that perfectly aligns with the back-edge of the micro SD card slot. This allows…

Downloads
549
Likes
139
Rating
5
P
PrintablesMaker Mellor

Gridfinity 3x2 hex bit holder (holds 136 bits)

Another gridfinity hex bit holder. This one holds 136 bits in a 3x2 footprint. Holes are 7mm diameter to comfortably fit standard ¼" (6.35mm) hex bits.

Downloads
534
Likes
62
Rating
4.88
P
Printablesgameyspirits

OLD - REMIX Cthulhu Death May Die - Retail Boxes Inserts SLEEVED CARDS (holds Season 1, 2, Goat, Yog)

######################## UPDATE 2025-02-03 If you have all 4 seasons, the unknowable box, and all the elder gods, check out my new insert. https://www.printables.com/model/1177300-cthulhu-death-may-die-retail-boxes-inserts-sleeved…

Downloads
495
Likes
82
Rating
5
P
Printablesjs500

Grand Austria Hotel and Let's Waltz Insert / Organizer - Holds Meeple Source Food Upgrades

This is an insert / organizer for Grand Austria Hotel with the Let’s Waltz expansion (retail versions of both) and the Meeple Source upgraded wooden food across the base and expansion boxes. It supports premium sleeves (Gamegenic Prime…

Downloads
494
Likes
58
Rating
5
P
PrintablesMerillan

Soda bottle holder - Holds two 1,5L

Bottle holder for stacking two 1,5L bottles on top of each other. All I wanted was to stack two soda bottles on top of each other, to save on space in the fridge. So after getting a 3D printer, I decided to make my own. This is my first…

Downloads
485
Likes
249
Rating
5
P
Printablesjs500

Space Base Insert / Organizer - Holds All Expansions Through Velocity in the Command Station Box

**This post has spoilers for Shy Pluto and Terra Proxima.** Update October 5, 2026 : Today I added an alternative player tray that should better fit cards in Sleeve Kings sleeves. It has thinner walls to accommodate some extra width, but…

Downloads
484
Likes
62
Rating
5
P
PrintablesJérémy LAFAYE

5x5 Holds Sample pack

This a 48 sample pack of approximately 5x5 cm climbing holds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors

Downloads
476
Likes
55
Rating
5
P
PrintablesJoerg_H

Cable clip: holds two cables together

These are simple clips to hold two cables together. Usage examples: Computer monitor data & power cable Desoldering station heater & vacuum line Sound system cables … you name it :-) PLA and PETG work very well. Printed with 10-20%…

Downloads
463
Likes
85
Rating
5
P
PrintablesJérémy LAFAYE

10x5 Holds Sample pack

This a 48 sample pack of approximately 10x5 cm climbing holds with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors

Downloads
453
Likes
44
Rating
0

Nano shards - climbing holds

These are almost too bad really, with a height of 7mm, but they're fantastic for slab or vertical setting, and may be good for a screw on for a volume or arrete. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…

Downloads
452
Likes
57
Rating
5
P
Printablesjs500

Architects of the West Kingdom Collector's Box Insert / Organizer - Holds All Expansions

This is an insert / organizer for the collector’s box of Architects of the West Kingdom. It holds the base game, Age of Artisans expansion, Works of Wonder expansion, the promos included with the Collector’s Box, the five extra player…

Downloads
442
Likes
76
Rating
5
P
Printablesjs500

burncycle Insert / Organizer - Holds All Expansions and Both Sets of Brassmags

This is an insert / organizer for burncycle, all of its released expansions (as of December 2023), and the Brassmag Volumes 1 and 2. It all fits in the core box, has no lid lift, supports vertical storage, and was designed to aid setup…

Downloads
426
Likes
70
Rating
5
P
Printablesgameyspirits

Cthulhu Death May Die - Board Game Boxes Inserts SLEEVED CARDS (holds Season 1, 2, 3, 4, Unknowable, Goat, Yog, Ithaqua, Animal Allies)

This insert will combine all 4 seasons, the unknowable box, Black Goat, Yog, Ithaqua, and animal allies all into 4 boxes. Without getting rid of the episode boxes, this is what I came up with. This insert will get rid of all your elder…

Downloads
424
Likes
67
Rating
0
P
Printablesrezips

Terraforming Mars: The Dice Game Insert With Included Dice Tray - Now Holds Expansion!

Update 25 Jun 26: I have made some major edits to the insert. Now it holds all the content from the Missions expansion. If you are downloading this for the first time, just download everything already in the files and you should be good.…

Downloads
424
Likes
55
Rating
4.86
P
PrintablesDannyji00

Yeti Lid Organizer V2 | Holds 5 Yeti Lids and Magslider Magnets | Available for small, medium, or large lids

This 3D printed Yeti Lid organizer is perfect for organizing 5 small, medium, or large yeti lids. There are versions for including either straws or magnets. 2.8" Lids are used on "small" drinkware, including 10oz Tumblers. For more…

Downloads
419
Likes
70
Rating
4.5
P
PrintablesJérémy LAFAYE

15x5 Holds Sample pack

This a 48 sample pack of approximately 15x5 cm climbing holds with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors

Downloads
408
Likes
51
Rating
0
P
PrintablesAmrtay

Precision Razor, holds disposable double-edge razor blades

I was always driven crazy by how fast the precision razors dull out after a single use, so I designed a razor with replaceable blades to solve this problem. I mainly use these to line up my mustache and the cheek line of my beard, but…

Downloads
392
Likes
76
Rating
5
P
PrintablesTlangphoto

35mm film case- (holds 4 rolls)

This film case will hold 4 rolls of 35mm film with a tight fitting top that clicks into place. Print the top and bottom in separate colors for added creativity.

Downloads
385
Likes
51
Rating
5
P
PrintablesJiK

Dishwasher Spacer - holds the door open

Dishwasher Spacer - holds the door open. Designed for 28 and 38 mm worktops . Printed from PETG, no supports needed. DESIGNED in ONSHAPE . Wait till they are all steamed out before adding spacer. Open the dishwasher all the way till they…

Downloads
380
Likes
125
Rating
5
P
PrintablesTheHeimZocker

Cigarette Box - Slim Design - Holds 5 Cigs

NO SUPPORTS NEEDED In the picture it's printed at 0.2mm (PLA) Print with a brim, unless you think your printer can handle it without The density should be 100%

Downloads
371
Likes
34
Rating
5
P
PrintablesTamsio

V2 . MTG Basic Deck Box – Magic: The Gathering Logo (Holds 60 Sleeved Cards)

"This 3D printed basic deck box is designed specifically for Magic: The Gathering players. With enough space to hold 60 sleeved cards, it keeps your deck safe, compact, and easy to carry. Featuring the iconic Magic: The Gathering logo,…

Downloads
352
Likes
33
Rating
4.5
P
Printablesjimerb

Sleek Razor Holder - Holds Gillette and Most Popular Brands

Sleek Razor Holder Elegantly holds your favorite razor in a variety of settings Features Stand your razor to free up space in your medicine cabinet, sink, or shower. Wide 25mm (.98") opening accommodates most size handles. Gillette,…

Downloads
335
Likes
48
Rating
4.67
P
Printablesjs500

Space Base Insert / Organizer - Holds All Released Expansions in Command Station Box

Oct. 9, 2024: I created an updated insert that holds the recent Genesis expansion. The updated insert is located here : https://www.printables.com/model/1034600-space-base-insert-organizer-holds-all-expansions-t **This post has spoilers…

Downloads
334
Likes
58
Rating
0
P
PrintablesBullseye3d

Nintendo switch games case - holds 12

I couldn't find a nice enough storage case to print to hold my switch games, so I made this one. It can hold 12 games. There are 2 holes in the backside if you ever want to mount the thing on a wall or else… The gcode file provided should…

Downloads
330
Likes
51
Rating
4.5
P
PrintablesCraig Eaveson

Beyblade X case - holds 3 V2

Original - https://www.printables.com/model/1425327-beyblade-x-case-holds-3 Just after I made the original my son got Wizard Rod which has an extra large bit! To allow for this I made inserts which are reversible, so they fit normal bits…

Downloads
328
Likes
39
Rating
3
P
Printablesbr3tt

Wiimote/Wii Remote Stand (Holds Two)

A stand for two Wiimotes. I modified the original design so that it fits two. I really like this design because it is small and easy to print! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter…

Downloads
325
Likes
32
Rating
4.75
P
PrintablesJosh Drury

Interchange Thumb Slug Holder – Holds 2 Interchangeable Bowling Slugs

Organize Your interchangeable Slugs – Bowl Smarter, Travel Lighter! This 3D printed Vice IT Thumb Slug Holder is built to hold two interchangeable slugs, keeping them protected and easily accessible whether you're heading to league night…

Downloads
319
Likes
17
Rating
3
P
PrintablesNate DiSalvo

Press Latch Wallet With Cash Clip (Holds 6 Cards)

EDIT: A new file for the main wallet body has been uploaded. If you previously had issues with the .stl file, the .3mf may work better. To use the wallet, you can press down on the spring and the tab over the card opening will lift to let…

Downloads
314
Likes
102
Rating
3.5
P
PrintablesJerry Lee

Cascade AirTag MagSafe wallet - holds 6 cards - STEP file included - Assemble after

Cascading AirTag MagSafe wallet with glides for easier sliding actions. Great for fidgeting too :) MagSafe ring like this one

Downloads
306
Likes
54
Rating
0
P
Printablesfatdavemakes

Old fashioned Oil lamp, holds flame bulb - Steampunk oillamp

A 3D printable old school style oil lamp. Designed to hold a "Flame Bulb". Inspired by Adam Savage's video on Tested.com but couldn't get hold of a similar lamp at right price in a reasonable time frame so designed my own. The lamp was…

Downloads
305
Likes
78
Rating
0
P
Printablesjs500

Aquatica Insert / Organizer - Holds Coral Reefs and Cold Waters Expansions

This is an insert / organizer for Aquatica. It holds the base game, Coral Reefs, and Cold Waters in the base box with no lid lift. It is an update to my previous organizer, which did not support the most recent Coral Reefs expansion. Here…

Downloads
298
Likes
34
Rating
5
P
Printablesmonkey nicaud

Crab who holds nothing

won't need any supports on this, should print fine. I also made some with a hole to fit a ball 11mm ball Bering to roll around. if you have a ball that's not 11mm you can always scale it to fit your needs. you will just probably need to…

Downloads
292
Likes
83
Rating
5
P
Printablesspencer3Dprints

Nespresso Original Pod Holder (Holds over 60 pods + extendable add on)

This sleek and durable Nespresso Original Pod Holder is capable of displaying over 50+ pods with as small as a footprint as possible! With no sacrifice to convenience, the pods easily slide out from the top keeping you caffeinated all…

Downloads
273
Likes
37
Rating
5
P
PrintablesGPlusPlus

9 Volt Battery Holder (Holds 14 Batteries)

This is a basic file I designed to hold 9 volt batteries. The reason I designed it was to make sure that the battery contacts did not short against each other in the drawer. It holds 14 batteries and should fit in most drawers because it…

Downloads
266
Likes
18
Rating
5
P
Printableswilmer

A mini bb shooter that holds 7 rounds

it can hold 7 rounds and shoot up to 3 meters!

Downloads
261
Likes
9
Rating
0
P
Printablesjs500

Obsession Insert / Organizer - Holds 2nd Ed. Base Game, Wessex, Upstairs Downstairs, and Useful Box

Update: I posted an updated insert that supports all the released expansions for Obsession through the Characters expansion here . ***Original Post Below*** This is an insert / organizer for Obsession (2nd ed.) with: • Wessex Expansion; •…

Downloads
251
Likes
53
Rating
5
P
PrintablesKarmah

MtG - Commander Deck Box (Compact/Stackable) - Holds 100 Standard Cards

This compact box can snuggly hold a sleeved deck of 100 TCG standard sized cards (2.5 in x 3.5 in / 6.4 cm x 8.9 cm), with an additional space for tokens, dice, etc. There is an optional basic box version with no divider that can be…

Downloads
250
Likes
42
Rating
4.5
P
PrintablesDELLOO2008

90 Degree Corner Clamp - holds two boards square for gluing and screwing (100% printed)

Put one board against each fence and turn the knobs. Each screw drives its own pressure pad, so you can clamp two boards of different thickness. The fences are one solid printed part, so the corner is always 90 degrees. Clamps boards from…

Downloads
249
Likes
136
Rating
0
P
PrintablesJoris

Compact Cassette Storage Box - Holds 10 Tapes

This cassette holder is a versatile and stylish storage solution for your cassette collection. Designed as a variation of my earlier 5-slot model, this version doubles the capacity, offering space for up to 10 cassettes. Whether you want…

Downloads
239
Likes
50
Rating
5
P
PrintablesFreedomMaker

Poker Chip Holder | with Screw-On Lid | Holds 45 Poker Chips!

Poker Chip Holder | Travel Carry Container Tube | with Screw-On Lid Holds 45 Poker Chips. This is the perfect addition to your travel poker bag. Helps to keep all of your poker chips organized so you don't accidentally lose any. The tube…

Downloads
236
Likes
32
Rating
5
P
PrintablesMupshot

5 inch FPV prop box holds 6

Yes, you can just throw a bag of props into your kit. This box holds a full change and has enough room to carry a spare of each. Plus I was bored and wanted to draw something. print the box rigid, and the lid in flexible. the lid can be…

Downloads
234
Likes
36
Rating
5
P
PrintablesAgronov

TOILET PAPER CLOUD - HOLDS 8 ROLLS

This Holder fits all the brands, large tp and small! I designed it to fit on an average print bet, there are two parts that connect with a Dove Tail joint. It can be on the wall with two options, I left two screw holes OR you can do like…

Downloads
233
Likes
35
Rating
5
P
PrintablesTlangphoto

120 film holder (holds 4 rolls)

This film holder safely stores 4 rolls with a secure top lid that snaps into place. Print the top and bottom section in different colors for added creativity.

Downloads
232
Likes
34
Rating
4.83
P
PrintablesTacoDimension

Flower Coasters and Holder, Daisy Coaster, Holds 4

Our unique flower shaped coaster set not only keeps your tables free from unsightly drink rings but also blooms with personality. The retro daisy shape adds a playful yet sophisticated touch to any decor, making it the perfect…

Downloads
231
Likes
28
Rating
5
P
Printablesmuddymaker

Star Trek Coaster Holder Holds Four Coasters

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Will hold up to four coasters. The Star Trek Coaster can be…

Downloads
220
Likes
46
Rating
5
P
PrintablesJudah Chang

bouldering holds

Some rock climbing holds I designed for my climbing wall. I designed them to be fastened to the wall with a 3/8 lag bolt but it should work with the standard allen bolt also. I printed these with a .8mm nozzle at a .3mm layer height. The…

Downloads
217
Likes
29
Rating
5
P
Printablesantionion

Watering can holds 1 Liter

Simple watering can holds up to 1 Liter water to water your plants. Printed in PETG with 0.6 mm nozzle 0.32 mm layer-hight adaptive and min. 3 wallperimieters. Can that I printed is watertight. No Suppords needed.

Downloads
215
Likes
27
Rating
5
P
PrintablesNelson

Grip Training Climbing Holds

These are four different grip training holds - a ball, a pinch, a tapered cylinder, and a cylinder with a double-pinch interior. They require paracord to complete (ideally 550 or stronger); you can tie the paracord in any way that makes…

Downloads
211
Likes
54
Rating
4.75
P
PrintablesJoris

Compact Cassette Storage Box - Holds 5 Tapes

This practical cassette storage box holds up to 5 audio tapes and is perfect for keeping your collection organized. The design allows the cassettes to protrude slightly above the edge, making them easy to grab. Ideal for analog music…

Downloads
210
Likes
52
Rating
5
P
PrintablesNickFAdame

Reloading Tray For 223 / 556 (Holds 50 Cases)

Dimentions X = 129.71mm (5.1 in) Y = 64.85mm (2.6 in) Z = 27.13mm (1.0 in)

Downloads
200
Likes
29
Rating
0
P
PrintablesSvechinskaya

Cassette Tape Shelf (Holds 5)

(Picture is sideways, for some reason the site just does that) A cassette tape shelf that can hold up to 5 cassettes and cassette cases. Can be fixed to wall using small nails or push pins (recommended two small nails in top, with pins in…

Downloads
199
Likes
25
Rating
0
P
Printablesilike2design

2oz paint bottle holder, holds 25

This is a newer version of my original 2oz paint bottle holder. It now holds 25 bottles vs. 20 and has increased strength in several areas.

Downloads
194
Likes
19
Rating
0
P
PrintablesCuriouslyCory

Climbing Holds

WIP Set of climbing holds. Holes sized for standard hardware (3/8" - 16 socket head bolts) Print settings 1 (epoxy infill): PLA with 6% gyroid infill 0.2 layer height (cura experimental) fuzzy surface Zero bottom layers Fill with epoxy…

Downloads
191
Likes
20
Rating
0
P
PrintablesPetilolz

Tuna Can Dispenser - Holds 6 Cans

This 3D-printed dispenser is designed to store up to 6 cans of tuna from Mercadona, a popular supermarket chain in Spain and Portugal. It offers a simple and convenient way to organize your pantry while keeping your tuna cans neatly…

Downloads
177
Likes
41
Rating
3.67
P
PrintablesCoded

Funwheel XR Foot Holds (Fungineers Stompies)

Print fenders in ABS or PETG with 100% infill. Foot hooks, AirTag cover, and mud flap should be printed in TPU. Mount the foot hooks to the fender using M5 screws and nuts. Nuts should slot into the cutouts on the back of the fenders.

Downloads
176
Likes
12
Rating
5
P
PrintablesDMD

Ring Doorbell / Camera battery wall mount - holds two spare batteries

Keep your spare batteries together and wall-mounted; holds two batteries. Use 3M double-sided tape or 3M Command Strips to mount to the wall or inside a cupboard.

Downloads
169
Likes
19
Rating
5
P
Printablessamywamy10

Hex Holder Gridfinity 4x2 (4U tall) - holds long, short and extender bits

This hex bit holder holds: 26x short hex bits 9x long hex bits 2x hex extenders In a Gridfinity bin 4 tall x 2 wide x 4U tall

Downloads
167
Likes
37
Rating
5
P
PrintablesPLA & Steel

Cute Animal Stand – Holds Your Phone with Style

3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Sell unique, stylish, and modern 3D models with a commercial license – no restrictions, full freedom! 💸 Why…

Downloads
162
Likes
57
Rating
5
P
Printableskyleireland

Compact Flash Card Holder by Kyle Ireland (Holds 6)

A Compact Flash Card Holder/Case that I made for my Dad. Feel free to modify and print. Lid can be a little snug. Note: My printer needs the bed tuned a little bit better again so the lid looks a bit funny on the image at top which I…

Downloads
161
Likes
8
Rating
0
P
PrintablesPaparazziN

Playing Card Holder for Skådis (holds 5 decks)

Just a simple remix of mchangcreative's playing card holder but holds 5 decks instead. The main difference is that I moved the hooks so that they are somewhat centered for the holder, now that it only holds 5 decks. I only use Bicycle…

Downloads
158
Likes
50
Rating
4
P
PrintablesNat

A Cup (holds 1 Cup)

I feed my dog a scoop of food, twice a day.

Downloads
156
Likes
20
Rating
5
P
PrintablesZen Aku

DUMMY 13 Weapons Storage Rack (Holds 26 Weapons) - Only 32g

DUMMY 13 Weapons Storage Rack (Holds 26 Weapons) A compact storage rack designed specifically for Dummy 13 weapons, holding up to 26 pieces while only using around 32g of filament. Perfect for keeping your growing Dummy 13 arsenal…

Downloads
155
Likes
75
Rating
0
P
Printableswilliam

Co-Ax Reloading Press fits Forster and Bonanza presses storage for the tools needed to work on machine also holds a small oil bottle

Co-Ax Reloading Press fits Forster and Bonanza presses storage for the tools needed to work on machine also holds a small oil bottle, no supports needed can print at any print height u like, there are also place to put magnets when done…

Downloads
153
Likes
26
Rating
5
P
Printablesmonkey nicaud

A rock That holds The Rock That holds a rock That hold The Rock.

You can now print this rock that holds The rock Who holds a rock That also holds The Rock! i dont know why you would download this, but if you are you will need a total of 18 6x3 mm round magnets to keep the Rocks and rocks together.

Downloads
153
Likes
39
Rating
0
P
PrintablesAzJake

Storage Rack for Milwaukee REDLITHIUM USB 3.0 BATTERY holds 3, 4, or 6 Wall Mount

Looking for a convenient and secure way to store your Milwaukee REDLITHIUM USB 3.0 batteries? Our wall mounted storage rack is the perfect solution. This rack holds 3, 4, or 6 batteries at a slight downward angle for easy insertion and…

Downloads
151
Likes
24
Rating
0
P
Printableslanguer

Simple AA battery box that holds 8 batteries

Simple AA battery box that holds 8 batteries Remixed from Sarti @ thingiverse (https://www.thingiverse.com/thing:4582694). Removed top and modified bottom to fit my purpose of holding rechargeable batteries for XBOX game controller.…

Downloads
142
Likes
12
Rating
5
P
Printablesmyth_sammich

Door STOPs for Sovol SV08 - Holds enclosure doors open

just print them, and then you can use these to hold the doors open on your SV08 enclosure. I used PLA, but I imagine anything will work. No supports needed in the set orientation.

Downloads
138
Likes
30
Rating
5
P

Wet Cat Food Pouch Dispenser | Holds up to 12 Pouches

Keep your wet cat food pouches organized and easy to reach with this dispenser. It holds up to 12 standard-sized pouches and uses a simple gravity-fed design, so the next pouch is always ready to grab. A removable lid makes refilling…

Downloads
137
Likes
15
Rating
0