Search results: hpr

Sort order

109 models

P
PrintablesVC Design

Mini Gym BenchPress - My PR Bench Press

Link to the platholder and plates: https://www.printables.com/model/1003638-mini-gym-barbell-weight-set-my-pr

Downloads
1,353
Likes
486
Rating
5
P
PrintablesD2 Doctor

Simagic HPR Haptic Pedal Reactor mount for Moza SR-P pedals

A simple adapter to fit the Simagic HPR to Moza SR-P and possibly SR-P Lite pedals. Mounts to the back of the pedal and holds the HPR to the back. Requires 4x M4x15 countersunk screws to hold the HPR to the adapter, and 4x M4x10…

Downloads
916
Likes
57
Rating
5
P
Printablesmikeev

Simagic P-HPR Adapters for Heusinkveld Sprint Pedals (Accelerator, Brake, Clutch)

Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…

Downloads
810
Likes
40
Rating
5
P
Printablesbroodro0ster

Simagic Haptic Reactor (HPR) mount for Heusinkveld Sprint brake

Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…

Downloads
436
Likes
16
Rating
0
P
Printablesnhchiu

StealthProtoXtruder 2.0

StealthProtoXtruder 2.0 (SPX2.0) Last update: 2025/08/02 ProtoXtruder 2.0 in stealth mode (low-poly style)! Most things are common between the two extruders. Please checkout PX 2.0 Github repo for details. (BOM, assembling, etc.)…

Downloads
414
Likes
80
Rating
5
P
PrintablesAVHfidgets&more

AVHprinting fidget star

Enjoy this handy nice print!!

Downloads
409
Likes
19
Rating
0
P
Printablesthomasfjen

Stealthpress Keybak Replacement Doorpuller

Cheap keybak alternative: https://www.amazon.de/ZDNT-Automatischer-T%C3%BCrschlie%C3%9Fer-Automatisch-T%C3%BCrschliesser/dp/B0BQRGTR8B Even cheaper when buying from aliexpress: https://www.aliexpress.com/item/4001346125084.html 800gr or…

Downloads
404
Likes
58
Rating
5
P
PrintablesMrTimcakes

VRS Pedals P-HPR Haptic Pedal Reactor Mount

VRS Pro Pedals - P-HPR Mount A sturdy mount using the existing top barrel nut on the VRS pedals. I've included a .3mf project with 100% infill between 4-17.8mm for extra strength. Printed all at once. Pictured printed in Eryone PETG-CF. I…

Downloads
393
Likes
20
Rating
0
P
Printables__lb__
Downloads
348
Likes
31
Rating
1
P
PrintablesMartin Majewski

Fanatec CSL Load Cell Brake Adapter for the Simagic P-HPR Haptic Shaker

Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…

Downloads
333
Likes
23
Rating
5
P
Printablesanchorman.nz

Insta 360 Pole Holder for the SeaDoo Fishpro

This holder supports the Insta360 Invisible Selfie Stick and can clip onto the Linq System of the SeaDoo FishPro Explore.. Print solid fill With a least PetG or better. Supports have been modeled so you wont need to add your own. PLEASE…

Downloads
302
Likes
16
Rating
0
P
Printablesrumcajcz

Asetek holder for Simagic P-HPR haptic reactor

Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…

Downloads
299
Likes
15
Rating
0
P
Printablesanchorman.nz

SeaDoo ST3 Fishpro Second Battery Mount

This holder has been designed to be glued into the hull of the fishpro. (The photos here are of a larger Lithium battery on my first version of the battery holder.) I have designed the holder to have a large surface area touching the hull…

Downloads
288
Likes
18
Rating
5
P
PrintablesJohn

SIMJACK UT Brake Pedal Adapter for Simagic P-HPR (Haptic pedals Reactor)

I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…

Downloads
286
Likes
12
Rating
0
P
PrintablesDiracDelta

Heusinkveld Ultimate+ HPR adapter

There seemed to be no free Simagic HPR adapters for the Heusinkveld Ultimate+ pedals, so I made my own. One model for brake and throttle, separate model for clutch. Designed for M5 Ruthex inserts . Run a long M5 screw through the part…

Downloads
248
Likes
13
Rating
5
P
PrintablesDomesticHacks

16mm Grow Tent mount for 5W clip fan from Garden Highpro GHP

Since the original mount of the Garden Highpro 5W clip fan isn't really suitable for (especially smaller) grow tents, I designed an alternative one. It can be mounted to a pole of the tent with two zip ties. I additionally put a strip of…

Downloads
238
Likes
36
Rating
5
P
Printablesc8_h10_n4_o2

Fill funnel for PsychProd's fast in-spool dessicant container

I took the original lid and added an open cone shape on top. For some reason unknown to me, I needed to slice at 101% for good fit, 100% was too tight.

Downloads
227
Likes
29
Rating
5
P
Printablespeer69

Simsonn Pedals Mount for Simagic P-HPR (Brake / Throttle)

Disclaimer: This model is a WIP, has not been tested in terms of durability and is likely going to change. Throttle Mount: Insert M4/M5 Nuts into the adapter Screw HPR to printed part using the provided metal-mount and screws Screw…

Downloads
218
Likes
21
Rating
5
P
PrintablesUnreal

Skadis SwitchPro Controller Holder

This tray is designed for SwitchPro Controller. Print with supports

Downloads
215
Likes
27
Rating
4.5
P
Printablesdavid0n

simagic P-HPR mount - for Fanatec ClubSport v3 Pedals

here is a very simple mount for the simagic P-HPR haptic feedback motors to mount them on the Fanatec ClubSport V3 pedals with the D-pads installed. I used two M6 screws and screw nuts to tighten them onto the pedals, and the motors are…

Downloads
196
Likes
30
Rating
0
P
Printablesrfourb

Simagic P-HPR Adapters for Heusinkveld Sprint Pedal - No Supports

Just some small tweaks to these incredible adapters to make for easier printing and assembly. Printed in Jessie Elixir PLA on a MK4S.

Downloads
192
Likes
14
Rating
5
P
PrintablesChris Lee

Simagic HPR Mount for VRS Pedals

Works for both throttle and brake. Suggest to use PETG or ABS. You can rotate it so the wire goes left or right.

Downloads
179
Likes
15
Rating
0
P
PrintablesDan

Moza CRP2 P-HPR Neo Mount

This is for mounting a Sim magic P-HPR Neo to the Moza CRP2 pedal set. You will need some machine screws (Roughly 4mm in diameter) and nuts to match in order to mount as well as a M6 bolt and locking nut. I printed 2 at 20% infill with…

Downloads
149
Likes
12
Rating
5
P
PrintablesMNK

Thrustmaster T-LCM Simagic P-HPR Mount

Uses the original hardware. First, mount the haptic reactor, then use the default screws to attach it to the pedals. The faceplate can be slid upward, but this will reduce contact Print it on its side with no support needed

Downloads
147
Likes
13
Rating
5
P
Printablesmichaelpm91

Simagic P-HPR Neo Haptic Pedal Reactor Neo mount for Moza SR-P pedals

A simple adapter to fit the Simagic P-HPR Neo to Moza SR-P. Mounts to the back of the pedal and holds the P-HPR Neo to the back. Requires 2 x M4x20 countersunk screws to hold the HPR to the adapter, and 4x M4x10 wafer-head low profile…

Downloads
144
Likes
15
Rating
0
P
Printablesfalcon14141
Downloads
138
Likes
32
Rating
5
P
PrintablesAntBlue

Ant test tube nest - Test tube portal - Ahprodite nest

This is an ant nest based on the Wakooshi Venus Nest. It holds 4 test tubes and has a small outworld. For 150mm x 16mm tubes Print the nest and lid at atleast 10% and the smaller parts at more than 30% 0.2 layer height Print the mesh…

Downloads
132
Likes
15
Rating
0

Kharkiv Derzhprom (Ukrain Landmark)

The Derzhprom ( Ukrainian : Держпром) or Gosprom ( Russian : Госпром) building is an office building located on Freedom Square in Kharkiv , Ukraine . Built in the Constructivist style, it was the first modern skyscraper building in the…

Downloads
119
Likes
34
Rating
5
P
PrintablesJulian Lemuren

Simagic P-HPR Adatper for Simagic P2000

Ich habe mal ein Adapter für die Simagic Shaker modelliert. Leider habe ich keine bei mir. Deshalb hoffe ich, dass der Flansch passt. Allgemein ist das Bauteil ziemlich straff in der Öffnung vom Pedal. Das muss so! Gebraucht werden 2x M5…

Downloads
113
Likes
12
Rating
0
P
Printablesanchorman.nz

SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Heads Up mount.

SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Centre mount Bracket..

Downloads
106
Likes
5
Rating
0
P
PrintablesSeven Sam

Asetek Pagani Huayra R Pedal - SIMAGIC P-HPR Haptic pedals Support adapta

Print no need for support, print with the motor plate on the bed side i printed @ 100%, but 50% it's okay you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor Step 1:…

Downloads
100
Likes
6
Rating
0
P
Printableszeroflow

Stealthpress Keybak Replacement Doorpuller - 18mm

800gr or 1000 gr variant with 63x63mm size. Loosen one barrel to get rid of the loop and tighten again. It fits directl

Downloads
95
Likes
12
Rating
5
P
PrintablesTHop3D

Mini Benchpress

This model i made is just a small benchpress. It can be assembled with bolts and glue and is a fun gift to give to someone who likes going to the gym. A wooden stick is used as bar.

Downloads
91
Likes
25
Rating
0
P
Printableskooziecup

Reviung41 Keyboard Highpro Case

Highpro case for the Reviung41 keyboard. Works with the sandwich case with standoffs that I got from https://www.boardsource.xyz/products/Reviung41.

Downloads
88
Likes
12
Rating
0
P
Printablesanchorman.nz

SeaDoo FishPro Rod Holder Base

I have just created a new product. This cap fits on the end of the FP rod holder preventing your fishing rod from dropping through the base of the holder and damaging your mats.. Easy install.. I have printed with TPU…

Downloads
77
Likes
11
Rating
0
P
PrintablesDavid Frey

Helzephyr MPR/HPR Model Rocket Builder's Kit

This post is an advanced publishing for the Rockety Forum members. You are welcome to download and enjoy the parts, but I am not supporting them unless you contact me via my build thread on TRF . When I release this model to the general…

Downloads
75
Likes
12
Rating
0
P
PrintablesAVHfidgets&more

AVHprinting Spiral Fidget toy

I hope you guys enjoy and please leave a like see you next time!!!

Downloads
71
Likes
9
Rating
0
P
PrintablesReese Boisse

Simagic P-HPR Haptic Motor Mount for VNM Pedals

Bracket to mount Simagic haptic motors onto VNM V1 pedals. Prints without supports Category: Video Games

Downloads
69
Likes
4
Rating
0
P
PrintablesEndless_Speed21

Simagic Haptic P-HPR for Moza CRP peddles

A set of brackets to mount the Simagic P-HPR Haptic Pedal Reactor on the original Moza CRP pedals. Which only need M4 Nuts & Flat Head Countersunk Screws The brackets are designed to hold the haptics as close to the pedal as possible,…

Downloads
69
Likes
8
Rating
0
P
Printablesevren.builds

Action Splashproof Speaker (Roseland RS-2oo) Open-Source Redesign

The Action Splashproof Speaker (Roseland RS-2oo) was redesigned to be easier to repair & recycle. It uses the existing parts but the designed is going to be adapted down the line the work with standard off the shelf parts. The current…

Downloads
56
Likes
4
Rating
0
P
PrintablesRobert Henry

Simagic HPR NEO Mount for HE Sprint Pedals

This is a simple and easy to print adapter to solidly mount your HPR Neo haptic devices to your Heusinkveld Sprint pedals. These print and work well using PLA. I also printed using ABS. 100% Infill is recommended. 50% infill works fine…

Downloads
55
Likes
3
Rating
5
P
Printablesanchorman.nz

Seadoo Fishpro Garmin Backing Plate

Seadoo Fishpro Garmin Backing Plate for the terminals of the Garmin FishFinder..

Downloads
53
Likes
6
Rating
0
P
Printablesanchorman.nz

SeaDoo FishPro gx750 black box vhf marine VHF radio Mount

Retrofit the GME Black box VHF Radio to the SeaDoo FishPro. Remove the plastic phone cover inside the glovebox then install the Handpiece mount.…

Downloads
53
Likes
8
Rating
0
P
Printablesanchorman.nz

Seadoo FishPro Water Pickup

Hi All --- I have published a new 3d model today ready for printing. Water pickup for a live bait tank. This is a simple attachment that clips onto the trim tab with a single bolt to hold it into place. I use the 12mm High-Pressure…

Downloads
53
Likes
4
Rating
0
P
PrintablesShaun Doe

Fanatec CSL LC Brake adapter for Simagic P-HPR (Remix)

Recommended print settings: Use the largest nozzle you have (E.g. I printed it with an 0.8mm nozzle and 0.4mm layers) Use 20% grid infill

Downloads
52
Likes
6
Rating
0
P
PrintablesAero

StealthPress Mount for Worx MAKERX Wood & Metal Crafter

Need supports for the upper section. Tolerances were built into the hinge, but may need to be drilled out. Takes a M3x25 screen as the hinge.

Downloads
52
Likes
11
Rating
0

Simagic Haptic Pedal Reactor (P-HPR) Bracket for Fanatec Clubsport V3 Pedals

Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.

Downloads
51
Likes
4
Rating
0
P
PrintablesBGDglider

Fully 3D-Printable Extension Arm for Philips MG5720 – OneReachPrint

OneReachPrint – Adaptive Back Grooming Extension for Philips MG5720 – no tools, no hardware, just print and groom After developing the original OneReach , I wanted to revisit the design to make it even more accessible for home users –…

Downloads
51
Likes
16
Rating
5
P
PrintablesGolddragons

3 Inch Rocket Fin Jig / Guides for High Power Rocketry HPR

This is a set of three parts for helping with building your 3 Inch High Power Rocket. This is designed to work with a 3 Fin style rocket, with a 3 inch body tube. This let me epoxy all three fins to the engine mount at the same time and…

Downloads
50
Likes
3
Rating
5
P
PrintablesNotatiation

Splashproof Rugged Snap-Fit SD Card Storage Box | No Parts Needed | Supportless

A Splashproof Rugged SD Card Storage Box. No Extra Parts needed to assemble, Prints in Place except one the Latch, which you need to Snap in. Make Sure to Print the Seal out of TPU and place it in in order to make the box Splashproof! Im…

Downloads
48
Likes
21
Rating
0
P
Printablesanchorman.nz

SEADOO FISHPRO SIMRAD NSX3007 fishfinder adapter

FISHPRO Adapter for the NSX3007.. https://www.simrad-yachting.com/en-au/simrad/series/nsx/nsx-3007-ai-xdcr--ausnz-chart/

Downloads
48
Likes
4
Rating
0
P
PrintablesJulian Lemuren

Simtag Ashley- Simagic HPR Mount/Adapter

Hier eine Option auch die Simagic HPR Shaker an den Ashley's zu nutzen. Der Motor wird mit 4 M4x20 Schrauben wie üblich an dem Bauteil geschraubt und wird dann über dem Pedal arm gestülpt. Danach schraubt man die Pedalplatte wieder an den…

Downloads
47
Likes
1
Rating
0
P
PrintablesFranchester3D

StealthPress Top With Handle for MGN9 Rail

Ads a handle to the mgn9h version of the stealthpress

Downloads
45
Likes
5
Rating
0
P
PrintablesJulian Lemuren

Tilton 900 Series Simagic HPR Adapter v3

Hier eine Option ein Simagic Shaker an den Tilton 900 Series zu nutzen. Benötigt wird eine längere Schraube für die Pedalplatte. (ACHTUNG: Das ist ein Zollgewinde!) metrische Schrauben funktionieren nicht! Der Adapter wird dann von Hinten…

Downloads
45
Likes
0
Rating
0
P
PrintablesJoel

DIY Simagic P-HPR Neo Clone

The $3 P-HPR Neo Alternative After researching what's inside the Simagic P-HPR Neo haptic vibration module, I discovered it's primarily powered by a simple rotary motor with flywheel. This inspired me to create a budget-friendly DIY…

Downloads
39
Likes
10
Rating
5
P
Printablessuperfell

Mounting bracket for the Simmagic P-HPR on PT-2 Pedals

These mounting adapters hook over the top stretcher/spacer on the pedals and are secured with screws into the side through the pedal arm slot. They won't work if you have the pedal arm up high in the slot. They also won't work on the…

Downloads
37
Likes
2
Rating
0
P
PrintablesFranchester3D

Keyback replacement 500g door puller for StealthPress

This is the 500g version of the door puller that replaces keyback in the original stealthpress. The force isn't quite strong enough to pull the iron up after you release it, but plenty enough to hold it in place, so it works good enough…

Downloads
37
Likes
3
Rating
0
P
PrintablesGdeGalleta

Simagic Haptic Reactor (HPR) holder Sparco sport seat

Simagic Haptic Reactor (HPR) holder for Sparco sport seat for belt holes. You need: 4x M3x5x4 Heat inserts 4 M3x12mm bolts I put adhesive foam in between Sparco's stock plastic hole cover and the seat in the outer part for eliminate…

Downloads
36
Likes
4
Rating
0
P
PrintablesTor Kramer

Simagic HPR Neo mount bracket for VNM Lite Pedals

This is just a quick bracket I threw together to mount the HPR Neo motors to my VNM Lite pedals. I'm not certain if it will mount to the full-size. It mounts using the screws that fix the pedal faces onto the arm of each assembly.…

Downloads
35
Likes
2
Rating
0
P
PrintablesNicsey

Benchpress

1:11 Benchpress with weights, bar and bench

Downloads
33
Likes
2
Rating
0
P
PrintablesPhilcotigo

StealthPress holder for KeyBak alternative, cable puller

I bought the cheaper alternative to the KeyBak cable puller (see " Retractable device (Budget savvy alternative https://s.click.aliexpress.com/e/_DeHzPFd )" as of 1st of february 2026 ) so I needed a fitting holder for it to mount to the…

Downloads
33
Likes
3
Rating
0
P
Printablesgrimmet

Garlic Press Cleaner - Reinigungsstempel für Knoblauchpresse

Just a stamp to clean the garlic press. Depending in the PLA used, NOT dishwasher-proof. ;) Prints without support.

Downloads
33
Likes
2
Rating
0
P
PrintablesJoel

P2000 HPR Haptics Adapter with Heatset Inserts

This is an alternative version of the P2000 pedals haptic adapter that uses heatset inserts instead of nuts and bolts. The adapter works for all pedals including the brake pedal, providing proper clearance for full functionality. Designed…

Downloads
31
Likes
4
Rating
5
P
PrintablesHK Design

Simagic HPR Adapter Mount for Nuosimulation Evo

Adapter for attaching the Simagic HPR to Nuosimulation Evo pedals. Several variants included: -Versions for 16mm or 20mm M4 countersunk screws -Versions for use with or without threaded inserts (M6x8x8)

Downloads
31
Likes
1
Rating
0
P
PrintablesBlissa Studios

TS101 adapter for Stealthpress

I chopped off the long arm and made it so the holder attaches to the stealthpress the same way the adapters that come with that insert press do.

Downloads
30
Likes
3
Rating
5
P
PrintablesMartin Majewski

Simagic - P-HPR - NextLevel Wheel Stand 2.0 - Mounting Adapter

I bought myself the Simagic P-HPR rumble motors but used only one for the brake pedal to simulate ABS activity (see https://www.printables.com/model/976496-fanatec-csl-load-cell-brake-adapter-for-the-simagi ). The other two motors…

Downloads
29
Likes
4
Rating
0
P
PrintablesMaWoKo_3D_Druck

Bodum FrenchPress Griff/Handle

ein Ersatz für deine French Press damit du weiter guten Kaffee genießen kannst.

Downloads
27
Likes
2
Rating
0
P
PrintablesDrKoko

Stealthpress Silent Mod

Your Linearrail comes with 2 Stoppers to prevent the block from sliding off. In my remix you can use these to stop the gantry in both extreme positions. use the first one in the remixed model to stop at the top position use the second one…

Downloads
26
Likes
2
Rating
0
P
Printablesdeserr

Centerlock adapter / holder / mount for TQ HPR50 motor magnet

After replacing my brake discs with such that are only available as a 6-bolt version which forced me to use an adapter, the original part of the magnet mount would grind on the frame of my bike so I designed this replacement part with…

Downloads
25
Likes
1
Rating
0
P
PrintablesStreelyDan

Simagic HPR mount for Fanatec CSL Elite Pedals

I created this to mount the Simagic HPR modules to my CSL Elite pedals. These may also work for the CSL Elite V2 pedals but I dont have those to test. Use the countersink screws included with your HPR actuators to mount them to the…

Downloads
25
Likes
1
Rating
0
P
PrintablesWellHelloThere

VRS Pedals adapter for Simagic HPR Neo rumble motor

Got my self the new Neo HPR by simagic for my rig and couldn't find any adapters for them so I made my own. This adapter works for Throttle and Clutch only. I have an original P-HPR haptic reactor on my brake and I had found already an…

Downloads
23
Likes
6
Rating
0
P
Printablesmitz

Simagic HPR NEO VRS v2 pedals mount

Simagic HPR NEO VRS v2 pedals mount - the neo haptic wire is now hidden behind the mount, front facing plate made smoother, adjusted bolt hole being (oval) Infill 20 should be enough. Made for throttle and clutch, but works for brake too.

Downloads
21
Likes
3
Rating
0
P
PrintablesVeszmadar

Rugged Moto tag splashproof case

Works well, but reduces the range where i can hear the beeping. BOM: 4x M3x12mm countersunk head screw (10mm works too) 4x M3 nut (there is space for self locking nuts) 38x2.5mm O-ring (i used these string silicon sealing, where you have…

Downloads
20
Likes
5
Rating
0
P
PrintablesLaisch

CNC Z-Touchprobe

A Touchprobe for CNC in normally open mode made from an PT31 plasma cutter electrode and nozzle and a spring. Can be mounted directly into the spindle for Z-probing the workpiece surface. Since the isolator part between the electrode and…

Downloads
20
Likes
3
Rating
0
P
PrintablesInfinityMakes

RKHPR Counterweight

Print at 3 walls and 96% infill

Downloads
19
Likes
4
Rating
0
P
PrintablesLukass

Benshpress dumbbell holder on wall

Just a holder on the wall carry around 15 Kg PETG Category: Accessories

Downloads
19
Likes
1
Rating
0
P
Printablessp_cecadet

Simagic pedal shaker(pnp-hpr) to thrustmaster tp3lc pedals

Mount your Simagic shaker to your thrustmaster tp3lc pedals No nuts or threadserts needed. Uses included shaker hardware. Attach the printed part to the shaker using the shakers included adapter plate and hardware. Slide the mount over…

Downloads
19
Likes
5
Rating
0
P
Printablessp_cecadet

Sim magic HPR PSU holder

Sim magic HPR PSU holder holds psu.

Downloads
18
Likes
4
Rating
0
P
Printablesgyoung23

Retainer for 54mm High Power Rocket (HPR) motors.

Retainer for 54mm High Power Rocket (HPR) motors. The threads are interoperable with the 54mm Aeropack retainer. There is a solid version of the cap which can be used to plug the motor mount tube or mask off the base when painting. The…

Downloads
18
Likes
0
Rating
0
P
PrintablesMareIngenii

Simagic P-HPR Mount for HE Sprint Pedals

I needed a reason to fire up Fusion and print something, so I created these mounts to connect my P-HPR actuators to my HE sprint pedals. This is designed to use the countersunk screws that come with the P-HPR and re-uses the M4…

Downloads
16
Likes
1
Rating
0
P
Printablesdefuxn

Bottomplate for the Stealthpress Zero

Bottomplate for this https://www.printables.com/model/869368-stealth-press-zero-small-footprint-heat-set-insert

Downloads
15
Likes
2
Rating
0
P
PrintablesDrgigaherz

Aprilia RSV4 Crashprotection EC2.0 connectors frontfork

I've had 2 crashes now on track. Both times the vulnerable connectors were destroyed which can be a pricey replacement. I printed these parts lying down with PA12-CF with 4 perimeters and 50% infill 0,1 layer height, support needed i…

Downloads
13
Likes
3
Rating
0
P
PrintablesJustin Davis

Meshpro Anti-Spill Ring

This is an anti-spill ring for the Freemax Mesh Pro atomizer with the bubble tank installed. Version 4 is 11.50mm radius and fits very well. Version 5 is 11.25mm radius and is for those that like a snugger fit. You do not have to remove…

Downloads
12
Likes
1
Rating
0
P
PrintablesRandakan

Benchpressy

Do you even bench(y)? (Arms taken from: https://www.thingiverse.com/thing:3397529 )

Downloads
11
Likes
8
Rating
0
P
PrintablesMV

Power Supply Holder for Stealthpress 1 S from

A holder that attaches to the Left rear leg of the Stealthpress 1S from @IconicFAB, to house a power supply. I have both a PineCel and a TS101 soldering iron attached to the Stealthpress and wanted their power supplies handy. This is a…

Downloads
11
Likes
2
Rating
0
P
PrintablesStudi_Ha

Kaffesatz Entsorger Trichter und Filter (Frenchpress, Bodum usw.)

Wie bekomme ich den Kaffeesatz aus der French Press? Nehme ein herkömmliches Küchensieb und gieße den Inhalt der French Press hinein – vorzugsweise über deiner Spüle. Das Wasser fließt ab und du kannst den Kaffeesatz im Sieb in den Müll…

Downloads
11
Likes
0
Rating
0

benchpress wireless charger

benchpress wireless charger for IKEA charger LIVBOJ with accessories as barbell, dumbbell and bumper plates Printed with PLA infill 10% printed on Creality ender v2

Downloads
10
Likes
0
Rating
0
P
PrintablesRain

Lebois SRT v10 mod for Simagic P-HPR

In order to moung P-HPR or P-HPR GT rumble motor you need to print Body1 and base lever. For assembly you will need: M4x20 DIN 912 screw, 1 PCS M4x10 DIN 912 screw, 1 PCS When you are doing assembly, do it in following order: 1. install…

Downloads
10
Likes
2
Rating
5
P
Printablespointer4

Simagic P-HPR to Racewerk S1 pedal console

You will need two M6 bolts (30mm) and nuts per pedal. I hope the pedal's milled design hasn't changed during production, and that the special pattern fits other models as well, it just fits a little tight at first. v2: When printing from…

Downloads
8
Likes
0
Rating
0
P
Printablesheartprinter

Flachprofil-Adapter

Square with 150x70mm (external dimensions) round with 95mm outer diameter 2.4mm wall thickness 230mm height

Downloads
8
Likes
2
Rating
0
P
PrintablesDozSmith

VACTechPro F02 Ultra tool holder

Bracket to attach a single, or 2 of the tools to the lower part of the wand on the VACTechPro F02 Ultra. Will require 4x M3 screws and ideally heat set thread inserts. (the hole has a 3mm section that will accept a screw but it will be…

Downloads
8
Likes
0
Rating
0
P
PrintablessiManthrop

Simagic Haptic Reactor Adapter for TB-RS Handbrake - HPR NEO P-HPR

Simple Adapter to mount any Simagic Haptic Reactor on an Simagic TB-RS Handbrake. Used Screws: - 2x M4x12 - 2x M4x18 - 2x M4 Nuts

Downloads
7
Likes
0
Rating
0
P
PrintablesJames79

DAAM/RAM/HPR parts and such

1st stage to body, and body to can gaskets are only a stopgap for when rubber and nylon ones are unavailable. Print in TPU, and the 1st stage gasket is very sensitive to over-torque. Mouthpiece plug is for the USD curved mouthpiece. Older…

Downloads
6
Likes
0
Rating
0
P
Printablesjizichun13

IQair HealthPro Plus Top lid filter hold down clip

its the clip that holds down the top filter located on the top lid, they are removable and mine recently break so i designed this one with thicker peg than original. Printed using PETG on XL and it come out great

Downloads
6
Likes
0
Rating
0
P
Printablesjannis

BENCHPRESS TROPHIES

benchpress trophies 135lb (60kg), 225lb (100kg), 315lb (140kg)

Downloads
6
Likes
2
Rating
0
P
PrintablesMarkusLaumann

SV08 toolhead board adaptor for StealthProtoxtruder 2.0

I was looking at 3D-Printsolutions' SV08 Lightweight Toolhead Mod (LTM) and thought I could keep from extending all the original toolhead wires if I mounted the board as close to the original position as possible. The StealthProtoXtruder…

Downloads
6
Likes
0
Rating
0
P
PrintablesWupper1988

TQ HPR Remote Schelle

Habe die Schelle mit einem Resin Drucker gedruckt. PETG geht auch, ist aber schwierig mit den dünnen Stegen welche die Knopfgummis Halten.

Downloads
6
Likes
0
Rating
0
P
PrintablessiManthrop

Simagic HPR Adapter for Shifter with 12mm Shiftlever

Simple Adapter to mount an Simagic HPR, HPR-GT or HPR-Neo on the Gearshift Lever, in my Case an Lebois SRT V10 Gearbox Gear Shiftlever needs an diameter of 12mm. Bolts needed: 2x M4x18/20mm 2x M4x 10mm 2x M4 Nuts Please be aware you need…

Downloads
4
Likes
3
Rating
0
P
Printablesstoni

Frenchpress Coffee Ground Filter

I don't want the coffee ground in the kitchen sink, so I did this model in the prusa slicer only for my frenchpress :) Check if the infill for "Netz" (=filter) is at 95% or maybe more.

Downloads
3
Likes
0
Rating
0
P
PrintablesMuffex

Fanatec CSL LC Brake adapter for Simagic P-HPR (short)

Recommended print settings (mostly copied from @ShaunDoe): PETG Use a large nozzle (e.g. I printed it with an 0.8mm nozzle and 0.4mm layers) Use 20% grid infill

Downloads
2
Likes
0
Rating
0