Search results: indoor

Sort order

636 models

P
PrintablesJohn Doe

Simple Indoor Glider V2

This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…

Downloads
27,282
Likes
5,133
Rating
4.78
P
PrintablesMartin Rigatoni

Indoor Boomerang - aka Roomerang

This very simple boomerang is only two layers thick and uses less than 5 grams of filament. If thrown correctly, it will fly around a two meter wide circle and come back to your hands! Printing and post processing: Print it at 0.2 mm…

Downloads
15,158
Likes
2,177
Rating
4.8
P
PrintablesJohn Doe

Giant Indoor Glider v4

Prints on the Bambu P1S in exactly 30 minutes with the provided 3mf file. Print in PLA with 100% infill. Be careful not to bend the wings while removing from the build plate. Once you take the glider off the build plate, flip it over(flat…

Downloads
5,152
Likes
619
Rating
4.83
P
PrintablesNordic Creativa

Indoor Plant Pot with Drainage and Drip tray

🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…

Downloads
4,394
Likes
1,163
Rating
4.92
P
PrintablesGavBro

Indoor Golf Hole

I created a golf hole inspired by a product from the putter designer, Scotty Cameron. If you miss the hole, the ball has a little track to slingshot back towards you. *The model as a very thin floating solid section but should not come…

Downloads
2,957
Likes
406
Rating
4.95
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor. Just glue the head with the body and enjoy it!

Downloads
2,183
Likes
586
Rating
4.85
P
Printablesteddyhatcher

Indoor Bee Hive

Instructional video below.

Downloads
2,127
Likes
255
Rating
5
P
PrintablesSINGH DESIGN

Universal Indoor Faucet Adapter for Garden Hose v2

Indoor Tap Adapter – V2 This 3D-printable adapter is designed to connect garden hoses to standard indoor taps. Easy to install and use, it requires no support structures during printing and ensures a secure, leak-free connection.…

Downloads
1,737
Likes
1,123
Rating
4.64
P
PrintablesJohn Doe

Mini Indoor Glider

Prints in 15 minutes on the Bambu P1P, 33 on the Ender 3 V2. Once printed, wait for the hotbed to cool down and gently remove with a scraper tool. Bend the elevator slightly upwards and bend the ends of the wings up. Hold the plane from…

Downloads
1,276
Likes
100
Rating
4.5
P
PrintablesDani

Dani's Indoor Grow Towers

Hey! Want to contribute, see the assembly manual, grab the Fusion 360 files, or report issues? Check out the project repository on GitHub! Hey folks! I thought it would be neat to create a Discord server where people can show off their…

Downloads
1,243
Likes
561
Rating
5
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.

Downloads
1,141
Likes
242
Rating
4.67
P
PrintablesTommy3D Lab

Indoor Boomerang

My first indoor model! With this boomerang, you can skip going outside and comfortably throw it right in your living room. Perfect for anyone who, like me, gets stuck indoors because of bad weather but still wants to get a few throws in.…

Downloads
1,129
Likes
164
Rating
4.67
P
PrintablesNordic Creativa

Owl Indoor Plant Pot

🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8% infill and 2 walls ( you can also…

Downloads
1,063
Likes
244
Rating
5
P
PrintablesJohn Doe

Wobbling Indoor Glider v2.5

Flies slower and more accurately than v2, at the cost of reliability and build difficulty. Is more durable and can be modified more. Print with 100% infill in PLA. A brim isn't needed. Wait until the build plate is cool before removing…

Downloads
730
Likes
42
Rating
5
P
PrintablesSASSy Design

Modern Gear Planter Pot fot indoor plants

A rather modern planter / pot for plants. It was inspired by conected gears moving togheder. It will fit into many interiors and is a fitting planter for all plants! It has the adventage (coz of it skape) to let the roots breath tho smal…

Downloads
714
Likes
226
Rating
5
P
PrintablesMarin

Watering Can for Indoor Plants

Our grandchild has discovered that it is very cool to water indoor plants. The problem was that, all watering cans, we can find around us was too big for tiny hands. We googled to find some appropriate model to buy. We couldn't find…

Downloads
633
Likes
98
Rating
5
P
Printablesdkrnet

Ring Indoor Cam Mount

A simple mount for the Ring Indoor Cam. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Hatchbox PLA Black Category: Camera

Downloads
625
Likes
25
Rating
5
P
PrintablesCmdrSoyo

XTR-33 | Fully 3D Printable Indoor/Outdoor Light Aerobatics RC Plane

I needed an Indoor RC Plane with removable wings that use a proper 3D Airfoil (NACA 0018). My idea was to 3D Print the wings and use depron foam plates for the rest. but then i asked “why not?” This model is intended to be printed in…

Downloads
603
Likes
68
Rating
0
P
PrintablesSVEN KRAUSE

Hydroponic Style Tower Indoor

Hallo, hier stelle ich euch mein Hydroponic-Sytem für die Küche vor! Frische Kräuter immer in Reichweite, so stelle ich mir das vor…. :) Ich wollte etwas designen, was sich optisch von den runden Towern abhebt. Das ist mir ganz gute…

Downloads
596
Likes
408
Rating
0
P
Printablesfilippo

Blink indoor camera stand

A simple stand for blink cameras. Works with volcano mount included with the camera and M3 heat set inserts. Raises the camera to place it in a flat surface and better point it where desired. Platform is big enough to make it stable and…

Downloads
589
Likes
81
Rating
4.8
P
PrintablesMe

Eufy Indoor Pan & Tilt camera mounting bracket

OpenSCAD file included in case it is useful

Downloads
584
Likes
64
Rating
5
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.

Downloads
581
Likes
125
Rating
5
P
PrintablesLeoquart

Concept2 Indoor Rower (model D) Device Holder - Easy to print - No supports

After a couple of years rowing I've notice that using the phone on top of the PM5 rower monitor with the provided phone holder I've been developing the tendency to arch the neck while rowing (especially on the initial "catch" position).…

Downloads
553
Likes
70
Rating
5
P
PrintablesSuperLion 3D

IndoorBee

@Tommy3DLab hat mich zu eine Challenge aufgefordert. Nachdem ich ihm in den Kommentaren seines Indoorbumerangs gesagt habe das ich Bienenwaben als stabiliesation cool fände meinte er wir könnten eine Challenge machen: Jeder erstellt ein…

Downloads
525
Likes
102
Rating
5

Smartphone mount for indoor rowing machine (Concept2 Rower PM5 monitor)

You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…

Downloads
501
Likes
49
Rating
5
P
Printablescmos

Eufy Indoor Cam 2K Pan&Tilt - Mounting Plate

Unfortunately, there is just one of these mounting plates in the box. So if you want to use the cam in different locations just print a couple of more mounting plates! no supports required - no rafts required.

Downloads
490
Likes
41
Rating
5
P
PrintablesChris Dee

Indoor plant pot / planter

A simple indoor plant pot and base I designed. Overall dimension is approx' 150x150x150mm (the pot is shorter than the distorted image shows). Can be watered from the base with a narrow spout. Print instructions Unassociated tags: Plant…

Downloads
490
Likes
80
Rating
5
P
PrintablesJP Creations

Eufy 2K Indoor cam wall mount

I made this eufy 2K indoor cam (pan & tilt) mount for the wall. I used the same screw pattern as the original mount that come's with the cam. But since you cant use that mount for the wall and still have a nice camera view (as i…

Downloads
477
Likes
65
Rating
5
P
Printablesmkprinz78

Ring Indoor Camera wall mount bracket

This is bracket I designed for mounting my removably mounting a ring indoor camera to a wall or window. The camera is secured using the supplied mounting base and two M4 x 12 machine screws which self tap into the bracket. Rather than use…

Downloads
448
Likes
77
Rating
4.8
P
Printablesdaytrader

Simple Indoor Glider V2 - REMIX - tuned Version :-)

Original model: https://www.printables.com/de/model/577942-simple-indoor-glider-v2 Same print settings and same Instructions :-)

Downloads
440
Likes
31
Rating
4.67
P
Printablesfreezyfresh

Dummy Shifter (Fake Hoods) for Dropbar (Fixie, Indoor Trainer)

These dummy shifters are modeled after the shimano grx shifters. They are basically fake hoods and thus the only benefit is to give you the same comfort as regular dropbar shifters. Main purpose is the fixie and indoor trainer bikes with…

Downloads
431
Likes
26
Rating
0
P
PrintablesJoe Malovich

Simple Indoor Glider V2 Thicker Wings BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.

Wings are now more than one layer thick, more durable. BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.

Downloads
420
Likes
36
Rating
4.67
P
PrintablesDaniele

Ring Indoor Camera wall mount (with screws)

It prints easily without supports, just place it on its bigger side.

Downloads
417
Likes
46
Rating
5

Smart Sprouts/Green Indoor Growing System

Welcome! After months of designing and testing, Stage one is complete, and our Smart Sprouts Indoor Growing System is ready! This is a fully 3d printed indoor solution for growing sprouts and greens. This design is hydroponic and does not…

Downloads
403
Likes
455
Rating
5
P
PrintablesSander

Garmin-Style Tablet Holder (30°) for Indoor Cycling

Garmin-Style Tablet Holder (30°) for Indoor Cycling This Garmin-style tablet holder allows you to mount your tablet directly onto any standard Garmin quarter-turn mount during indoor cycling sessions. Perfect for Zwift, Rouvy,…

Downloads
402
Likes
37
Rating
5
P
PrintablesTorontoDan3D

Eufy Indoor Cam Pan Tilt holder

I made this Bracket/Stand so that I could put my Eufy Pan/Tilt camera up on the top of a cupboard in a corner of the house. April 27 Updates: Added revision 4 of the upper to make a little more stiff and to open up the hole in the back in…

Downloads
377
Likes
68
Rating
4.75
P
Printablesburkelarsen

Window Sill Extender Support Clamp (Great for Indoor Gardens)

For all the indoor gardeners! I was tired of my very small window sills that were not wide enough to hold plants for good sunlight. I didn't want to permanently add a larger window sill with glue or screws, so I designed a clamp that…

Downloads
376
Likes
73
Rating
0
P
PrintablesRT3D

eufy 2K Indoor Cam Window Mount

I saw on r/eufy there was a request for a windows mount option similar to the wzye camera. I previously created an outdoor enclosure for the Eufy 2K Camera here: https://www.thingiverse.com/thing:4638649 So creating this didn't take too…

Downloads
374
Likes
56
Rating
5
P
PrintablesKent Prints

Nest Cam (outdoor or indoor, battery) mount plate

This is a mount plate for the Nest Cam (outdoor or indoor, battery) https://store.google.com/product/nest_cam_battery?hl=en-US Google don't/won’t sell these. Pictured at 3:26 in the video above. https://youtu.be/x2-RRXMj-cs?t=206…

Downloads
350
Likes
27
Rating
5
P
Printablesmanmac

Gryffindoor Bookmark

Print with 0.1mm height and change color at 3.3mm which gives four layers of the second color.

Downloads
330
Likes
60
Rating
4.67
P
PrintablesJonweb

Sonoff Mini Case - indoor enclosure

Hello, just another enclosure for Sonoff mini used indoor only ,could be used on light inline wire, work in progress i will finish it in December 2022. 20211128_finished, ready to test on print 20220412 the 4 holes on corners are made to…

Downloads
330
Likes
63
Rating
5
P
PrintablesAJM

Blink Indoor Camera Window Mount

I was looking for an interior window mount for the Blink Indoor camera, similar to this one for the Blink Mini , but couldn't see anything available, so decided to design and create my own. This has been tested with a 2020 Blink Indoor…

Downloads
327
Likes
40
Rating
5
P
PrintablesRipe3D

Eufy Camera wall Bracket for Solo Indoor Cam P24 / P22 Pan & Tilt 2k and 1080p By Ripe3D

Eufy Camera wall Bracket for Indoor Cam Pan & Tilt 2k and 1080p Simple bracket to attach your Pan and Tilt camera to a wall. Bracket works by fixing the mounting plate that comes with the eufy camera to the bracket using the two m3 6mm…

Downloads
321
Likes
54
Rating
5
P
Printables42electron

Sensor Housing indoor / outdoor DHT22 / and others

Case for dht22 on other sensor version outdoor with PG screw opening and cable stripe connector version indoor with backwall cable opening Used M2 8mm screws for lid M2x4x3,5 threaded inserts PG7 screw connection for outdoor version DHT22…

Downloads
315
Likes
20
Rating
5
P
PrintablesRafael Zasas

Elegant Indoor Trellis for Climbing Plants – Snap Peas, Beans & Vines

A minimalist yet decorative indoor trellis designed to support climbing plants like snap peas, beans, or vines. I wanted something functional but also aesthetically pleasing. I think this trellis hits the sweet spot between functionality…

Downloads
299
Likes
152
Rating
0
P
PrintablesBuildit

Indoor Golf Ball Return Mini Golf

Remix of the original file created by matthewpatt on Thigiverse(Link Below). I added a ramp for the unit. Recommend printing 10% infill and .3 layer height. File is broken out into multiple pieces for smaller printers.…

Downloads
299
Likes
104
Rating
0
P
Printablessam elliott

Indoor golf putting cup hole thing

My friend asked for a golf putting hole thing and this is what I made. The main hole is 4.25 inches so it should be, regulation? Idk I don't golf haha

Downloads
299
Likes
27
Rating
5
P
PrintablesNoFate301

Emergency indoor key

So I have two bathroom doors that take the little metal key in case someone locks the bathroom door and steps out. This is great in a pinch. It helped me dial my settings in as well as the result I finally got was solid and the layers…

Downloads
294
Likes
10
Rating
0
P
PrintablesTarik EL hamdi

Dragon Planter Pot Fantasy Plant Holder Indoor Decor

A stunning dragon-themed planter featuring a detailed sculpt of a dragon wrapped around the pot. Perfect for adding a bold and magical touch to your space, this planter is ideal for succulents, small plants, or decorative greenery.…

Downloads
285
Likes
43
Rating
0
P
Printables3Dtec_Studio

Smart Indoor Mini Herb Garden with LED Lighting – Stylish & Functional

New Version: _______________________________________________________________________________________________________________________________ Design and 3D print your own indoor mini herb garden with integrated full-spectrum LED lighting –…

Downloads
283
Likes
80
Rating
5
P
PrintablesSven

Activated Carbon filter for Indoor Gardening with 100mm Fan adapter

DIY Activated Carbon Filter: Instructions Print the Adapter Ring Print the Body Print 2 Lids Glue adapter Ring to your 100mm Fan (make sure its on the correct side!) Screw one lid in the part with the long thread of the body Fill it up…

Downloads
281
Likes
56
Rating
5
P
PrintablesKratos

Eufy S350 Indoor Dual Cam 4K wall mount correct base orientation

Just reversed the base orientation of both anchors from the original model by Terrywood02

Downloads
275
Likes
19
Rating
0
P
Printablesila

Tablet holder for indoor trainer

Needed a tablet holder for indoor trainer, OEMs cost about 80eur so I said no. Found multiple ones but none of them had exact specifications for tablet or handle bar, or were really complex or just didn't work with Wahoo Kickr Shift…

Downloads
273
Likes
20
Rating
4
P
PrintablesDirkvK

Japanese Lantern/Indoor Lamp

Japanese lantern inspired lamp. Indoor version with paper shoji doors. The base has a 40mm hole for a e27 fitting (see picture), this fitting has two rings that are used to keep it in place. There is also a version without hole, use…

Downloads
272
Likes
66
Rating
5
P
PrintablesNordic Creativa

Indoor Plant Pot with Drainage and Base

🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…

Downloads
258
Likes
56
Rating
5
P
PrintablesGrant

Ring Indoor Camera Flat Base

If you've misplaced your mounting hardware for your Ring Indoor Cam, the camera can fit onto this base. The base has just a flat side for something like double sided tape. It has to be printed with internal supports so the tabs stick out…

Downloads
252
Likes
19
Rating
0
P

Indoor Golf Hole

An Indoor Putting Golf Hole I recommend scaling each file to 130% so standard golf balls can be used. The model is printed on a Prusa Mini+ with a 0.40 mm nozzle, 0.10 layer height, and using PLA 3DE Premium in the colors Leaf Green and…

Downloads
245
Likes
26
Rating
5
P
PrintablesJP Serrano

Conector Esquinero para Carpas Indoor – 3 Vías (Modelo 3D)

Conector Esquinero para Carpas Indoor – 3 Vías (Modelo 3D) Diseñado para estructuras ligeras, este conector esquinero de 3 tubos permite unir perfiles de forma firme y precisa, ideal para carpas indoor, sistemas modulares o soportes…

Downloads
241
Likes
18
Rating
0
P
Printables4cj

Indoor Golf tee set, with holder

Tee hights 40, 35,30,25 and 11 mm. Tee's printed in tpu 2 walls no infill. No supports needed. Holder in PLA or Petg 3 walls and infill 10-20%. No supports needed.

Downloads
241
Likes
15
Rating
0
P
PrintablesJamshamdana

Water Tray Filter for GE Profile Indoor Smoker (Arden)

This slides over the water tray of the GE Profile Indoor Smoker to keep the spent pellets from falling into the sink. Whipped up in Tinkercad in 15 mins, so may be a few refinements as I use it more. Highly recommend printing in a more…

Downloads
239
Likes
8
Rating
5
P
Printables3D-Muc

Engine bracket and parts for Clik 21 indoor RC plane

The original parts are also made with a 3D printer. You will find 2 versions of the motor mount. This motor mount fits for the motor from SCHNURZZ (Pichler drive set) The rudder horn is also available as a template. Category: R/C Vehicles

Downloads
235
Likes
23
Rating
0
P
PrintablesProfos

*updated* Tennisball raiser for front wheel on indoor trainer (25mm to 45mm)

On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of the height of a Tennisball, but not…

Downloads
233
Likes
24
Rating
3
P
PrintablesProfos

*Outdated* Tennisball raiser for front wheel on indoor trainer

Note: Here is an updated version ! On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of…

Downloads
231
Likes
20
Rating
4.5
P
PrintablesBUDS3D

NEST CAM INDOOR/OUTDOOR DESK /SHELF MOUNT

GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE FOR A PERMANENT FIT. LISTED ARE TRIED…

Downloads
217
Likes
19
Rating
5
P
PrintablesBrendonBuilds

Parametric Indoor Golf Simulator TeePU Golf Tees

Create custom indoor golf tees of any size for use in a golf simulator. A selection of standard sizes from 25-55mm has been included as .3mf files. By using the .f3d model, tees can be adjusted to any height using the Modify > Change…

Downloads
207
Likes
13
Rating
0
P
Printablescode3

Drill-less Mounting Bracket for TP-Link Kasa Indoor Pan/Tilt Security Camera

This bracket uses the hardware included with the camera. Bracket attaches to the wall using 3x medium 3M Command Strips. Printed with 20% infill.

Downloads
207
Likes
44
Rating
5
P
PrintablesTroy Lee

Front wheel support for indoor bike trainer

This model can simulate 3%/5%/7% incline for my bike. 7% is perfect for a Road to Sky ride. My tyre is 700C x 25mm, but it should be okay for 30mm. Material: PLA Infill: 15% Perimeter: 4

Downloads
203
Likes
42
Rating
5
P
Printablesakaderby

eufy solo indoor camera mounting plate

Copy of the mounting plate for the Eufy Solo Indoor Camera. Merge it with your own designs to add a camera mount option!

Downloads
203
Likes
28
Rating
5
P

3.3.2 Ventilation System with HEPA Filter for indoor grow Tent (Martha)

This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ◾ 2023-12-23: Update your Martha with an even further optimized air…

Downloads
202
Likes
33
Rating
0
P
PrintablesRT3D

eufy 2K Indoor Cam Enclosure for Outdoor

I recently purchased the Eufy off amazon because it was very cheap, I have the YI Home outdoor cameras but they are not 2k. Since the Eufy camera was meant for indoors, I designed an enclosure to be used outdoors. There are (2) variations…

Downloads
201
Likes
31
Rating
5
P
PrintablesTerrywood02

Eufy S350 Indoor Dual Cam 4K wall mount

Update on remixes: Use the remixes! I initially made this incorrectly and somehow lost the correct version before uploading! Not taking it down to ensure the remixes dont get tagged somehow. The “wall mount” that comes with the S350 is…

Downloads
198
Likes
13
Rating
0
P
PrintablesSmokerJoker2020

Ring Indoor Cam Wall Mount

I needed a wall mount / shelf for my new Ring Indoor Cam. Designed so the USB cable can pass through a slot in the back of the holder. Simple install w/ 2 screws or command strip. No supports required. Printed in PLA+ with 20% infill.…

Downloads
196
Likes
23
Rating
4.67
P
PrintablesMAKERTEAM®

Quad Indoor Grow Pot for mini Grow Box (30x30)

Indoor Grow Pot for mini Grow Box (30x30). Pots will fit stable on base and are reuseable. If the base don't fit on your printer, resize both models with the same value. On Bambu P1P you can scale it down to 90%. Material: PETG or PLA…

Downloads
196
Likes
48
Rating
0
P
PrintablesRokyson

Tree Planter for Indoor Plants (without supports)

Modern design of a flower pot in the shape of a tree. Suitable for 3D printing with PLA and PETG material. During printing, it should be turned upside down so that the roots can be printed without supports.

Downloads
195
Likes
53
Rating
5
P
PrintablesMartin_au

Eufy Indoor Cam 2K Pan and Tilt pedestal

Lifts the camera up enough to see a Prusa's print bed.

Downloads
194
Likes
37
Rating
5
P
PrintablesTarik EL hamdi

Chameleon Plant Pot Cute Reptile Planter Indoor Succulent Holder

A fun and eye-catching chameleon-shaped planter that adds personality to any space. Designed with detailed textures and a playful pose, it’s perfect for showcasing small plants like succulents or snake plants. Ideal for desks, shelves, or…

Downloads
177
Likes
41
Rating
0
P
PrintablesBotany Chic

Japandi Watering Can - Modern Minimalist Indoor Plant Watering Pot with Ribbed Texture

A minimalist Japandi-style watering can designed for modern plant lovers. The organic teardrop silhouette pairs vertical ribbed grooves with a soft oval cutout handle, creating a sculptural piece that doubles as decor when not in use.…

Downloads
176
Likes
49
Rating
0
P
PrintablesDeMamba Prints

Angel Planter (indoor/outdoor)

Used Poly.cam to scan a planter of an Angel. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…

Downloads
174
Likes
32
Rating
0
P
Printablesmekuba

Universal Indoor Key

Key for indoor locks works on %90 of the locks! I reccomend using strong filament like:abs,petg If you like don't forget to add to your favorites

Downloads
173
Likes
21
Rating
4.5

Small indoor watering can - petit arrosoir

Small indoor watering can with graduations every 50 ml up to 300 ml. Convenient for indoor plants with no risk of pouring alongside. Beak design without dripping. Petit arrosoir d'intérieur avec graduations tous les 50 ml jusque 300 ml.…

Downloads
172
Likes
33
Rating
5
P
Printablestdanielsson

Eufy Indoor S350 Wall Mount TD Remix

The wall mount that comes with S350 is horrible as the original creator said. I totally agree with him, that the angel is no good at all with it. I did some changes on Terrys model, so it fitted my needs. This is my very first remix that…

Downloads
172
Likes
11
Rating
5

Hanger Clamps For 4" Outlet 7.8" Diameter Carbon Filter For Indoor Garden / Air Filtration System / Grow

These clamps are designed to fit a carbon filter with an outer diameter of 7.8". These types of filters usually feature a 4" intake/outlet flange, and are often used in indoor gardens, and airbrushing fume hoods. They feature a small flat…

Downloads
170
Likes
79
Rating
0
P
PrintablesPeter C

Golf - Indoor Golf Tees - varied heights

Simple indoor driver golf tees (9) with varied heights from 0.125 inches (3mm) to 2.5 inches (63mm). Printing Tip Use TPU for FDM printing on 100% infill and 0.2mm layer height. Usage Testing is underway to see how durable they are when…

Downloads
167
Likes
13
Rating
0
P
PrintablesThomPatterson

Indoor Pet Bird Fountain

Our pet birds kept trying to get under the water at the sink so I decided to make a fountain for them. It's a bit splashy so you'll want to place it on a towel or in a larger tray / basin. We only run this for an hour or so when the birds…

Downloads
166
Likes
48
Rating
5
P
PrintablesSM3Dtech

Universal key for indoor doors

Print with Supports touching buildplate Resolution: 0.16 or higher Infill: 100% Filament material: PLACF - PETG or Stronger

Downloads
157
Likes
11
Rating
5
P
PrintablesLysander

Ring Indoor Camera (2nd Gen) Wall Mount

Wall mount for Ring Indoor Camera (2nd Gen)

Downloads
155
Likes
21
Rating
5
P
PrintablesHenriDIY

Indoor Planter With Good Drainage

Large two piece planter with good drainage. Eazy to scale for different sizes. Needs 200x200mm bed to print in original scale. For cover photo I painted mine with stone effect paint and it came out great. I also used plastic primer to aid…

Downloads
155
Likes
68
Rating
5
P
Printablestaosd

Nest Indoor Wired Camera (2nd Gen) Mount

Summary Nest indoor mount.stl is an alternative to the plate included with the camera. Ensure you print with supports on. Nest indoor mount threaded.stl is meant to be used with a 1/4" threaded insert, allowing you to attach this camera…

Downloads
155
Likes
10
Rating
5
P
PrintablesToby

Idoo indoor garden replacement pot

A replacement pot for the Idoo indoor kratky style herb garden. These indoor gardens are fully self contained and can sometimes be found for under $80.

Downloads
151
Likes
36
Rating
5
P

Google Nest Indoor Camera Mount

Introducing the 3D printable mount for the Google Nest Indoor Camera. Did you? Break your mount Want multiple mounting location Mount your camera where ever the hell you want Break your mount twice ;) Well now you can print another one!!!…

Downloads
151
Likes
16
Rating
0
P
Printablesoxygene

Netatmo Indoor Module Holder

Use two screws to place your netatmo indoor module anywhere

Downloads
150
Likes
18
Rating
4.67
P
PrintablesTarik EL hamdi

Fox Planter Pot Decorative Animal Succulent Indoor Plant Holder

A beautifully designed fox-shaped planter that adds a warm and natural woodland touch to your space. With detailed textures and an integrated plant pot, it’s perfect for succulents and small indoor plants. Ideal for desks, shelves, or…

Downloads
148
Likes
36
Rating
0
P
PrintablesExtra Fox

Pimoroni Enviro+ Super Deluxe Indoor Air Quality Housing

The wildfire season in Oregon went from "hey it looks like we lucked out this year" to "who guessed apocalypse for 2020" in a shockingly short period of time. And as our air quality hit the lowest in recorded history I got to wondering…

Downloads
148
Likes
58
Rating
5
P
PrintablesRshar27

Tesla Model XYS3/Cyber Charger Holder Indoor/Outdoor Heavy Duty

The Tesla Model XYS3/Cyber Charger Holder embodies a sleek and weatherproof design, crafted to withstand outdoor elements while maintaining its aesthetic appeal. Engineered for durability, it ensures long-lasting performance, seamlessly…

Downloads
148
Likes
10
Rating
5
P
PrintablesTFro3

MUFGA Indoor Gardening System - Hole Cover

This simple cover design features a groove on the bottom of the cover to keep it in place and not slide off the unused hole/opening. Need a holder to keep all unused covers together so you don’t lose them? Get that file here . Don't have…

Downloads
147
Likes
12
Rating
5
P
Printablesm_castle

HEMA Longsword Indoor Trainer

HEMA Indoor Longsword Trainer I wanted a HEMA trainer I could safely use indoors without smashing lamps or walls. Most commercial ones were either too long or way too expensive, so I made my own. This longsword trainer is 3D-printable and…

Downloads
146
Likes
29
Rating
0
P
PrintablesAdam

Wall Mount Extension for Ring Indoor Cam

This wall mount extension helps position your Ring Indoor Cam when a flush mount doesn't work. It moves the camera's included mounting bracket slightly away from the wall, at a 30 degree angle. There is also a small cable management…

Downloads
146
Likes
16
Rating
0
P
PrintablesDrakoTrogdor

Ring Indoor Camera Weighted Mount

This is a weighted mount for the Ring Indoor Camera. Fill with sand or another weighted material. After filling with weighted material, close it up with the screw and then friction fit the camera into the base. Could also double as an ink…

Downloads
145
Likes
17
Rating
5
P
PrintablesJumpei

Indoor Garden with LED Grow Light support

I had a problem with my printer during print the base so it's not complet (I need to reprint this part) but all it's ok and fit realy good. I print Water_Level_2.stl with 0% infill to increase precision. The seeds germinated correctly…

Downloads
142
Likes
52
Rating
5
P
PrintablesSulya

Enclosure for Indoor Mini LCD Temperature Humidity Meter

Adorable holder for Indoor Mini LCD Temperature Humidity Meter These inexpensive meter modules can be bought online and have outside dimensions of 49x28mm and mounting slot dimensions of 46x25mm 2 Versions provided, with 0.8 and 1.2 mm…

Downloads
140
Likes
22
Rating
4.9