Butterfly or Bowtie Router Inlay Template
I am including the F3D so you can scale the size of the inlay, but I made one small and one large that should cover most sizes of inlays.
- Downloads
- 669
- Likes
- 92
- Rating
- 5
1,139 models
I am including the F3D so you can scale the size of the inlay, but I made one small and one large that should cover most sizes of inlays.
The model is quite self explaining. Print it, insert it into the original card game box. the tolerances for the cards are rather tight. Model file was created with Autodesk Inventor 2024.
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
You print this little flower pot in vase mode and then press fit the inlay into the channels. (They snap in when I print on my Mk4). It allows you to make a dual color design with only a single extruder. Once I had all the filament press…
This is an inlay for the produce tray of the fridge. The small offset allows moisture to collect at the bottom of the tray. The accumulated water can then easily be removed, preventing the vegetables from getting moldy. Suggested…
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
NOTICE: INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Working off of a design by @Jeroen P, I've had to remix…
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
case inlay for GoPro hero 8/9/10/11/12. This model is made for GoPro.
there is enough space that you can put a Lens Cap on the GoPro (like this one Simon Pratt's Lens Cap ) Case Inlay 1xGopro: 1x GroPro Hero 9, 10, 11 4x microSD 1x SD to microSD adapter 1x GoPro dual charger (opening for USB-C charging…
For engraving up to 11 pens or ballpoint pens simultaneously with the xTool F1. A placement map for xTool Creative Space is also available. Update: The placement map file has been updated for xTool Creative Space 2.x, including grouped…
Remixed the original cardboard spool adapter design to secure to the spool utilizing the holes using a press fit design. It is also clipless to allow for easier removal and should be appropriately sized to apply enough friction on the…
The Ultimative Filament Drybox Introduction So... I saw those filament dryboxes. Of course I'd wanted to design one by myself so badly… And here it is! Let me introduce an overengineered but cool looking drybox spool stand! Does it print…
Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props
A friend wanted this for his workshop so we designed it better for what he needs. We used the space better by adding three sizes and some optional mounting holes. He also wanted the inverse of the cutouts. I will include the blender file…
This is a system to organize your drawer or replace an existing drawer inlay. It uses a grid of 40x80mm, so you can combine any length and width. I have designed two different hights - 60mm and 80mm To keep the boxes in place, use the…
Sunflower Windmill inlay cover I get some request for a single color opportunity of my Sunflower Windmill . I came up with this easy solution. Just print the cover inlay in black and press / glue it into the yellow printed sunflower…
I needed a box with an inlay. And so i decided to upgrade the box from whity . Now you can change the amount of dividers in the parameter menu Changes are made by the division_length resp. division_width
Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…
🇫🇮 Tervetuloa Helsinkiin! Welcome to Finland! This model was designed by Dany Sánchez with optimizations by Jukka Seppänen @kijaidesign . The idea of MiniWorld3D came to creator Dany Sánchez after a Finnish friend who asked if 3D printing…
I'm not 100% sure which Gopros and Cases fits. I only tested it with the Gopro 10. Fits only the normal lens, not the Max Lens Mod. Changes to v3: Since some have complained about the somewhat tight fit, I have added three different…
The outline template for XTOOL creative space is also available
A modern and sophisticated designed dish for soaps with an integrated grate to collect dripping water. The standard dimensions are 175 mm x 110 mm x 20 mm . Printed with the following settings: Layer Height - 0.2 Walls - 2 Infill - 15% 🚀…
Terraforming Mars Inlays have been done by the dozen - personally, I moved away from the classic components so much that none of them would be helpful. So I decided to create a premium inlay for the following content: Terraforming Mars…
Inlay to insert into the handle recess for everyone without MMU (like me), but still want the handle in another cool color. Simply print the additional part in the desired color and insert it into the handle.
Just a quick enclosure I made for this Inland SSD I wanted to put in an ITX case and take up a little bit less room. Not sure what other SSDs it would work with. Maybe someone will find use for it.
After some Years, my OPC Key Buttons went away. To save the Key, i've desigend a new Inlay. Printed in TPU - works greate ! No clue needed ! DualColor MMU printable Print instructions I've printed the part on the textured Prusa Sheet to…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
Customize your poker suitcase inlays with a card (and dealer / blind chip holder) plus poker racks as base and lid, so you can use both of them for playing. OpenSCAD-Files: Customizable Chip Rack including these parameters: Chip Diameter…
Simple clamp with decorative low-poly inlay. Single or dual color options.
Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…
Insert for IKEA Skadis tray to store sewing machine needle boxes. I tested with "Schmetz", "ORGAN" and "akra". Others should also fit. I was inspired by the model of @TomDoe, but I designed it from scratch in a completely new and…
To the last vacation I wanted to take all my Nintendo Switch games with me, but not all of the cases. That's where I came up with the idea, nothing special but easy and quick to print. So all games have their place, I hope you like it. In…
Description An universal set of crates of several sizes. These can be stacked together and have slots to add signs to know, whats inside. Signs can either printed from the included files or added with handwritten paper with 29mm width and…
Reloadable master spool with 90mm center hub and 60mm flange spacing. This spool design appealed to me because it was threaded and used less filament than other reloadable spool designs I saw. When I printed it out as-is, I discovered…
Fits Inland spoolless filament snugly without slipping. Width has also been adjusted to match inland sizes This is the version with the locking mechanism that works in Bambu AMS without unraveling I printed it with 0.2mm layer height, no…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to tile with a fancy diamond inlay pattern. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
**NEW** : The Universal Ring works on ALL Inland cardboard spools, but the AMS will not operate properly unless it is propped open and resting on its locking tabs. Instructions for using Universal Ring: 1) Align long oval in the Universal…
Letters have a 0.1mm kerf from the original LCD Cover design file and are 0.6mm thick these can be glued inside the cutout logo on the LC Cover as shown on the picture
Inspiration for this vase collection came from drodfro's “Filament Beer Pint Vase”. Multiple sizes of slim and wide body vases are provided in this collection. You can choose between vase mode and regular printing mode. The neat part…
Einfache Muldeneinlagen für Bohrer und Fräser in Schubladen. Simple trays for Drills and Milling Cutters in Drawers.
Needed a spacer to take up the gap between the cardboard and the spool. This is for Bambu Spools that fit the AMS and Microcenter Inland filament refills. I printed from PETG with 3 walls and 20% infill, PLA should work fine.
Made a simple coin/key tray for my Ridge wallet, but I also tested it with 2 other slot type card wallets, one with friction fit and one with a slide out lever and it works with all of them :) It's about the same dimensions as the…
Das Insert ersetzt alle in der Spielbox gelieferten Inlays. Es passen alle Acrylteile + Playmat rein. Kein Lidlift/Deckel schließt komplett. Die Playmat muss relativ straff zusammen gerollt werden, dass sie in “Layer 3” passt. Drucker:…
Nach gut 20 Jahren sind mehrere der Einlauftrichter meiner Rolladen gebrochen, da das Plastik langsam porös wurde. Da ich den Hersteller und das Modell nicht mehr herrausfinden kann, habe ich das Teil kurzerhand selbst Modelliert. Das…
This 4 piece inlay for Bosch/Sortimo L-Boxx Mini stores the Bosch GSR 12V-35 FC with its accessories and nine ¼'' Bits. The L-Boxx mini has to be modified a little to make it fit unfortunately. The back-left slot has to be removed with a…
This is a set of 2 router templates for a bowtie inlay or bowtie joint : 1 template to route the negative part of the inlay (bowtie_template_ech1_negatif) 1 template to route the bowtie itself : you still have to cut 2 tabs of the bowtie…
I have done my best to replicate the inlay of the armrest of my Skoda Karoq as faithfully as possible. In addition, the diameter of the front cup holder has been increased to 75mm so that thermos cups can also be placed. Two models are…
A tray insert to hold packages of sewing needles of the german company "Schmetz", maybe fits other companys as well.
Fits nicely inside the box and helps you to organize all the tiny things of the game so you can start the game faster. The magic and flames holder can also be used during the game of course. I also designed some feet for the figurines as…
Thanks to x13a for the original model. Mainly i remixed the model to add 4 microSD Slots and to get the GoPro to fit in with this lens cap on.
I remixed the original model to include the Chevrolet logo as an Inlay.
Since I was not really satisfied with the existing Skadis Gridfinity solutions and had plenty of these original IKEA Skadis trays laying around, I figured why not reuse them. They fit a 2x6 baseplate just perfectly. I added two magnet…
This is an inlay/organizer for the board game Lacrimosa by Devir Games. This inlay is heavily inspired by the one by silfire , however I didn't like the hard edges and wanted a different design for some of the boxes. The player tray…
Print the pieces and glue together. I haven't messed around too much with it but it did require a little sanding so maybe the shell could be ever so slightly larger.
Aus der Reihe “Ordnung ist das halbe Leben” hier einige Inlays für die IKEA Alex Schubladen. Gedruckt in PLA mit einem CR-10 Smart Pro und 0.6 Düse (0.4 geht auch, dauert aber deutlich länger) Die kleinen Füße (einfach duplizieren auf…
This was created to fit on the Bambu Labs spools that came with my P1P and AMS. I normally by Inland filament from Microcenter. I wanted to try and use their spooless filament as it is $2 cheaper per roll of PLA+. The fit of these rolls…
I made this inlay because I liked the format of the Systainer3 S76’s and the OCD in me wanted to create cutouts for all my tools. I couldn’t find any template cutouts that covered most of the nooks and crannies of the Systainers which is…
Basierend auf dem Vorbild der Aufbewahrungsbox von @Hugo habe ich Inlays entworfen. Für die 3er Version Box 180x60x25 Für die 6er Version Box 180x120x25 Die 3er Version wurde bereits überarbeitet.auf den Fotos ist die V1 zu sehen. Update…
This is an inlay for the Fortnite loot chest created by Blecheimer . The 30mm version, like in the picture, the cartridges are easier to be removed only the lid can't be closed. The 20mm version the cartridges are lower in the chest and…
Add this D&D inlay to any project. Fun little print, comes out looking great.
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/190120 The print settings in the print profiles have been tested. PLA prints in 16 minutes & PETG in 18 minutes. ==== Protect…
TPE-83a eSun Layer High 0.2 Layer Widht 0.4 Temp 240 Speed 20mms Ready in 7 Min
I remixed a supportless box and created/designed the inlay myself.
FULL CREDIT TO MakeALot ON THINGIVERSE. UPLOADING HERE TO SHARE WITH THIS COMMUNITY. Summary A circular trinket/present box with the words "I LOVE YOU" embossed in the style of Morris/Goudy around the outside. There is a plain lid, or if…
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter. The sensor used is a “M12 DC 5V NPN NO LJ12A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will…
With the base part you can mark the basic shape and the neckline on the leather comfortably. The additional slot with the two integrated holes serves on the one hand for the exact positioning of the two round seam holes existing at the…
I love the Toyo Y350 Toolbox so I made inlays for various small tools that can be stacked in two rows. Fits nice and firm. Split the model into two objects with your slicer and print them separately. Printed in PETG, but PLA and other…
This is a large turning knob designed for heavy use in woodworking jigs and similar applications. It contains a M8 metal nut inside to make a very rigid thread. Outer diameter is 60mm. I recommend using "Prusa Control" Slicer for easy…
This is an insert designed to be a one stop storage solution for Tiny Epic Dungeons (incl. Expansion), able to hold all content also for sleeved playing cards. For details pl see the pictures. Print instructions: 0.30mm layer DRAFT, with…
I love Vintage Russian Lenses especially the Helios 44-2 58mm f/2.0 . It's a dirt cheap prime lens with an amazing swirly vintage look. A couple of years ago I made some Aperture Inlays, Yes this doesn't require to remove the aperture of…
Ein Inlay für das Brettspiel Revive (Deutsche Ausgabe). Das Inlay soll einen schnellen Spielaufbau ermöglichen. An inlay for the board game Revive (German edition). The inlay is designed to allow a quick game setup.
An empty inlay for Systainer Mini T-Loc, as a base to design our own for Your tools, equipment... You can choose between the whole part, and two divided parts, which fit Prusa Printers buildplate (included the Mini). I designed an inlay…
“Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer.” STL…
Inlay for the lid of the Wera Tool Check Plus Rugged Box that holds a Knipex Cobra Water Pump Pliers (87 03 125) and a Knipex Mini-Pliers Wrench (86 03 125), the 152mm bit holder of the Tool Rebels Edition of the Tool Check Plus and 8…
I designed this inlay for the Happy Little Dinosaurs board game, which fits inside the original box. It's made to house all of the original game + all of its expansions because the original box can't fit everything.
Housing for Inland IR Night Vision 1080p camera with IR illuminators for Raspberry Pi. May work for other cameras with IR illuminators, but I've only used it on my Inland. Designed to be used with GoPro mount. Needs to be printed with…
The original make was great, but didn't fit the cardboard Inland spools (which are slightly smaller than the spooless ones). I have quite a few of the cardboard ones and wanted an easy way to quickly convert them to a Bambu Lab reusable…
Irgendwann liegen einem die Schubladen beim LMC Wohnwagen beim Ausziehen auf dem Boden. Hier hilft nur eine beherzte Amputation der ausgebrochenen Teile und ein Einfügen neuer 3D-gedruckter "Implantate". Ein wenig Nacharbeit mit der Feile…
For a mini-project I was doing, I needed an Inland spool model, but couldn't find one. It seems models of different brand spools are hard to come by, so I'll do my part in remedying the issue. Enjoy!
The original coin tray is just a trough that doesn't hold the coins properly and if you leave the tray open while driving, the coins rattle which is quite annoying (at least for me). The new tray holds the coins individually and upright…
German: Hallo! Ich habe für meine Bosch L-Boxx 102 mal ein Inlay gebastelt! Es ist am besten, wenn man den Boden und den Aufbau separat druckt ,um ihn anschließend mit Uhu Hartkunststoff zu verkleben! Druckt also die Noppen vom Boden nach…
This is a simple case-inlay to organize your GoPro and accesories. It fits the camera, a EU-220v Charger, the GoPro dual-charger, two original battery-packs, some mounts and SD-cards. The inlay only fits for the original GoPro Case which…
Print this inlay and put it in your Ender 3 S1 tool drawer. Get organized, and have access to the most used accessories at the front of the drawer. For me that is the filament cutter and filament clips! I use these clips:…
The Front Inlay needs to be printed as two separate parts in order to fit through the narrow opening of the Center Console. The Back Inlay is for 2 € coins on the left, 1 € in the middle and 50 cents on the right side. The Slots can be…
This is an insert designed to be a one stop storage solution for Tiny Epic Zombies (incl. Expansion), able to hold all content also for sleeved playing cards. For details pl see the pictures. Print instructions: 0.30mm layer DRAFT, with…
The original QIDI spool position is modified to the left handle with a spool bracket embedded in it. The original dehumidification spool holder can be used and can also be used with other filaments. Spool Holder layout reduced. The outlet…
I remixed a supportless box and created/designed the inlay myself. Bigger version for more accessories.
Background I kept on experiencing the dreaded "AMS assist is motor overloaded" error when I used certain filaments (Inland spools, Inland refills with Bambu spools, and sometimes with Sunlu spools). I noticed that the filament would get…
This is a remix of https://www.thingiverse.com/thing:3938005 increased the tolerance of the main inner threads for easy on / off removed the chamfers around each of the cutouts A reusable filament spool designed to work with eSun and…
This is remixed from _endrift's Nintendo Switch game case on Thingiverse . Same great case, but with a graphic on the front! This case for Nintendo Switch game cards is well-designed, and convenient to customize in openSCAD. But it was…
The ING Logo. Print the two parts in orange and white and press them together. I started from the commonly available PNG file and created a vector version using Inkscape. I loaded the SVG file into Fusion360 to extrude the white and…
I had to buy some spooless filament from Microcenter out of necessity, but spools that fit and worked in the AMS were lacking. I liked this original spool the best because the chamfered edges were removed, so the edges have more surface…
designed a perfect fitting inlay print the TPU inlet with hilbert curve with no top layer to make sure your stuff dousnt slip around
68mm Lufteinlass für GrowBoxen Lässt Luft durch aber kein Störlicht rein/raus 68mm entspricht den standard Lochsägen für z.B. Steckdosen -- 68mm/ aprox 2.67 inch light proof air intake for growbox air passes through but leaves no light…
Inlays in different sizes for LBOX 102 . For the smallest inlay (single), a topper can be printed to add more space in the box for parts/screws of small amounts. I used a 2cm foam material for the lid of the box. I glued that foam to the…
a reasonably efficient adapter for using Microcenter's Inland branded filament refills on a Bambulab spool. as Inland refills are slightly narrower than the Banbulab ones, the filament does have a tendency to become a bit messy but still…
(English version below) ich suchte nach einer Möglichkeit, zusätzliches Werkzeug im Deckel der L-Boxx zu befestigen, wollte aber dabei nicht auf Lösungen zurückgreifen, bei denen ich die Halter einkleben muß. Die Ideen von @fns720 (…
I made this box inlays for the two free slots in the new (2022+) Multimaster AMM700/500AS LBoxx to keep everything organized. After I bought my Fein Multimaster last year I had to find out that all delivered accessories are just hold…