Search results: ipp

Sort order

Counting matching models…

P
PrintablesExlipsis

Flippy Friendly Butterfly Knife Balisong Trainer {NO SCREWS NEEDED!}

BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…

Print approx. €3.59–€4.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,344
Likes
250
Rating
4.56
P
PrintablesGarage Maker

A remix of the Zipper Slider Jig with clamping improvement

I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
4,366
Likes
280
Rating
4.71
P
Printablesdj_redbird

Tripp Trapp Trofast Clip (metal basket)

The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant

Downloads
2,211
Likes
107
Rating
4.44
P
PrintablesFabianVeile

Thin Grippers / Tweezers (Compliant Mechanism)

Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
1,574
Likes
422
Rating
4.69

⫸ Drippy Spiral Tree ⫷

Good for vase mode and scaling too! Uses Fibonacci sequence to create the pattern. Enjoy!

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
892
Likes
248
Rating
5
P
PrintablesFabianVeile

Bistable Compliant Keychain Gripper

Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
799
Likes
127
Rating
4.81
P
PrintablesMarianne657

Ripples - XL texture roller

Imprints clay with a beautiful ripple texture of concentric circles. 20cm wide - 2 sizes of pattern Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in…

Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant

Downloads
720
Likes
172
Rating
5
P
PrintablesJeepingJohnny

Drippy Bucket! With Bigger Drips and Paint Leaks.

Drippy bucket, its now leaking paint onto your desk. Bigger drips and large and small paint leak's. PSA: I am not responsible for damage to any of your property from leaking paint! Inserts for the Drippy bucket found here.…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
699
Likes
181
Rating
5
P
PrintablesKazu-chan

Fly fishing tippet holder

You can choose body shaft dia. in accordance with tippet spool dia. 1)dia.16mm 2)dia.13mm

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
640
Likes
112
Rating
5
P
PrintablesBodo

Paracord endcap for zippers and other uses - 2× ø2mm or 1× ø4mm

Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
596
Likes
154
Rating
4.67
P
PrintablesPaul

Reinforced Zipper Pull

This remix of N00P's zipper pull should be a tad stronger. I liked the design, but it kept wearing out. Please iterate on this one and make it even better! I encourage you to use your Slicer of choice to scale both pieces in thickness…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
571
Likes
70
Rating
4.5
P
PrintablesDevWolf

Reinforced Flipper Zero Case (for Flipper with TPU cover)

Reinforced Version of TruTech's awesome Flipper Zero Case with f4r0kh's Wifi DevBoard Cutout on Top. Bottom fits the Flipper with TPU Cover. Since the holes for fixing the clips were still too thin for me, I reinforced this area a bit…

Print approx. €0.04–€0.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
513
Likes
94
Rating
4.83
P
Printablesfedererj

kederschiene keder pipping rail clip roof tent clothes line vickywood

First modification on my rooftop tent. This little clip allows you to dry your clothes under your tent. I tested the clip in ASA PETG and CarbonfiberPETG, all materials stand our 3 week journey. !!You need to print it with 0.25 and 100%!!

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
415
Likes
50
Rating
5
P
PrintablesArbora

Tufting Carpet Clipper

A 3D model for carpet trimming: a guiding tool that helps you achieve even trims effortlessly. The model can be printed in separate parts (floor and handle), which can be aligned and glued together. Alternatively, you can print it as a…

Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant

Downloads
404
Likes
34
Rating
4
P
PrintablesMLS

Zipper Slider Replacement for Wellensteyn and other #8 two-way-Zippers - Reißverschluss Ersatzschieber für Wellensteyn und andere 2-Wege Reißverschlüsse 8mm

Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…

Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant

Downloads
397
Likes
40
Rating
4.67
P
PrintablesFabianVeile

Bistable Compliant Robot Gripper

Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…

Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant

Downloads
384
Likes
84
Rating
4.9
P
PrintablesDanteSech

Zippo Lighter Stands

This model is an organizer for multiple zippo type lighters (original and similar clones), from 2 to 5 spaces in a row to save space. Perfect for placing in organizer boxes or adapting to EDC organizers. Feel free to download the model…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant

Downloads
380
Likes
78
Rating
5
P
PrintablesErik

Stokke Tripp Trapp Toy hanger

My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
371
Likes
31
Rating
5
P
PrintablesMLS

Zipper Slider for #5 two-way-Zippers - Reißverschluss Schieber für 2-Wege Reißverschlüsse 5mm

Hier habe ich Slider u.a. für 2-Wege-Plastikreißverschlüsse 5mm konstruiert. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten eingehakt und dann vorsichtig nach unten gedrückt -…

Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant

Downloads
360
Likes
39
Rating
4.67
P
PrintablesCelta

Sewing machine zipper foot

Replicated a faulty old zipper foot and fixed it.

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
348
Likes
134
Rating
0
P
PrintablesSK1TTL3Z

5 Tipped Throwing Star

Safer ninja star ig.. but be careful can still hurt someone

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
43
Rating
5
P
PrintablesTykomyk

Lid for Clipper Blades Holder ( Pet Grooming, Barbers, Stylists, Cosplay)

Lid for the 10 slot blade holder for Andis clippers: ( https://www.printables.com/model/208188-clipper-blades-holder-pet-grooming-barbers-stylist/files ). For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. (T blades…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
317
Likes
46
Rating
0
P
PrintablesKazu-chan

Fly fishing tippet holder adjustable model(dia 16mm)

You can add tube when you want to hold more tippet spools. Additional tubes are 2types(10mm,15mm) And you can add tube both side of body.

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
314
Likes
49
Rating
5
P
PrintablesPeter Farell

Constantine St. Benedict Zippo Snuff Box / Spice Box

Constantine St. Benedict Zippo Stash Box.

Print approx. €22.50–€27.50 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
113
Rating
0
P
Printablesishikawats

Grippy Filament Clip Clamp

This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
53
Rating
5

Shipping Container For Brio / Ikea Type Wooden Trains

A shipping container that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. If you like this model check out this collection of my other toy train models.

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
252
Likes
51
Rating
5
P
Printabless0ren

Zipper pull lock - Anti theft/pickpocketing bag, suitcase and backpack travel and commute zip clip

Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
210
Likes
28
Rating
0
P
PrintablesKazu-chan

Fly fishing tippet holder dia.8mm

Shaft diameter is 8mm. It is suitable for VARIVA or small hole spools. It is able to hold 3 or 4 spools.

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
18
Rating
0
P
Printablestom

Zippo-Ablage/ Zippo shelf

In diesem formschönen Halter finden 4 kleine und 4 große Zippo-Feuerzeuge Platz. Die Ausschnitte sind 33 x 13 mm bzw. 40 x 15 mm groß. Da das Modell nicht besonders stabil sein muss, habe ich im Prusa Slicer je 3 Perimeter vertikal und…

Print approx. €4.39–€5.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
174
Likes
30
Rating
5
P
PrintablesAinon3Dtisk

Hippo family

Good morning, Welcome to my profile, full of models and miniatures :-) I have a Hippo Family for you for the zoo, diorama, or just for play. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important:…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
32
Rating
0
P
Printablespr3mium.cola

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
37
Rating
5
P
PrintablesNISAkuh

FTC Into The Deep claw gripper for sample/specimen

Also Check out https://www.printables.com/model/1043084-gobilda-ftc-battery-mount-no-numbername For all Tetrix style batteries Print with supports and scale to 100.1 % With its lightweight construction and optimized grip strength, this…

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
10
Rating
0
P
PrintablesRosti

Clipper Comb / Guard Replacement 3mm (Wahl)

Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
162
Likes
16
Rating
0
P
PrintablesCocacolas29

Strong, flexible, Gripping Cat Ears, One Color Printer

I made it in two parts to separate colors parts. The original file works perfectly but with my Prusa Mini, it was not possible to have the ears colors, so I modified a bit the shape. Print in PETG Black and PLA white 0,2 layer height. I…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
53
Rating
5
P
PrintablesG Bell

Tippe Top

I split this model into two parts to make the finished top sturdier, as well as printing without supports or brim. The Tippe Top versions with the screw-in stem are harder to print and more fragile. Printing: Standard settings with 15%…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
145
Likes
9
Rating
5
P
Printablesadaptive

Nalgene Sipper for Wide-mouth Water Bottle

Print in colorFabb_XT Clear , which is FDA food contact compliant. Avoid using other liquids than water, this is to reduce exposure to bacteria.

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
141
Likes
14
Rating
3.33
P
Printablestur_bo_des_ign

Zipper - Zip Fastener - Zipper Pull - Reisverschlussschieber - Reisverschlussschlitten - Reisverschlusszipper

Der Reißverschluss ist ein unentbehrliches Zubehör für Bekleidung, Taschen und andere Gegenstände. Diese Zughilfe aus PLA bewegt den Öffnungs- und Schließmechanismus des Reißverschlusses. Ein qualitativ hochwertiger Zipper zeichnet sich…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
16
Rating
5
P
Printablesmscalora

Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
18
Rating
5
P
Printablescnf

Repcord Repbox 2 Feed Nipples

The nipples that came with the repbox didn't always hold on to my PTFE tubes very well, and sometimes I came back to find the PTFE tube wrapped halfway around the spool (PTFE is very slippy, that is why we use it :P ) So I designed these…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
11
Rating
0
P

Wattestäbchen / Q-Tipps- und Pad Spender

Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby

Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
7
Rating
0
P
PrintablesCalebTimoteo

Origami Dripper Pot Plant - Home Decoration

Any feedback would be greatly appreciated. The "Origami Dripper Pot Plant - Home Decoration" draws inspiration from the iconic Origami dripper designed by Yasuo Suzuki and Kiyohito Tanaka. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm…

Print approx. €12.94–€15.82 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
30
Rating
5
P
Printablesmscalora

Super Deluxe Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…

Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
30
Rating
5
P
Printablesdick

Skadis T-Nut mount for Klein Wire Cutter and Stripper

This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
92
Likes
8
Rating
4.67
P
Printablesmrmila

Flipping coins

Work coin This needs to be on every desk in every office. Working coin toss. "To work or not to work" ... Don't you know? Flip a coin... Have a fun :-)

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
39
Rating
5
P
PrintablesOBConcepts

Zip Tie Zipper Pull

How could a zipper pull not have a zip tie as a part of the design? I broke all of my zipper pulls on my jacket and had to replace them so I have made this zipper pulls that utilizes a zip tie. I have made two versions, one is the…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
19
Rating
5
P
Printablesdrewwwau

Wahl Hair Clippers - Gridfinity Bin

A 5x2 Gridfinity bin for the Wahl model 9649 hair clippers. Print with draft quality settings with low infill, but ensure more than 2 top layers to avoid the pillowing in my photo.

Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
17
Rating
0
P
PrintablesMagig_I3Prusa

Krippe REMIX FDM NoSupport PREsupported

A very nice print for the Xmas Tree FDM ready SCALED to 80mm for more details use the High stl version the 3mf file holds the lower Version 1h30min at 60mm/min

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
8
Rating
5
P
Printableswafflecart

Trippy Himalayan Salt Lamp

A trippy Himalayan salt lamp. To achieve the effect you see in the picture you need to use the following settings in your slicer with white filament: - 0.2mm layer height - 2 perimeters (if the 0.2mm layer height hasn't set it already). -…

Print approx. €5.41–€6.61 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
17
Rating
0
P
Printablestim.dwertmann

Push-ups / Handstand gripper

Push-ups / Handstand gripper

Print approx. €9.15–€11.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
8
Rating
0
P
PrintablesHenk

Gripper for Leifheit Click System

We have a Leifheit telescope handle (Nr 41523, 135 - 400 cm) that we use to clean high windows. Also it can be useful for positioning something high up. For that I already created a universal hook…

Print approx. €2.76–€3.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
68
Likes
12
Rating
5
P
PrintablesMoNkEy

Drippy Pail With Piggy Banks

Print profile 0,20mm SPEED (Input Shaper) No glue needed, all snap connections, and I recommend printing in PLA for dimensional stability, however others have had success with PETG as well. As described by the original author

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
28
Rating
0
P
PrintablesPatrick

Pour-over coffee dripper adapter

This is an adapter to fit a pour-over coffee dripper on various sized coffee pots. The hole in the middle has a diameter of 45 mm, the small step is at a diameter of 100 mm and the outside diameter is 120 mm. Print in PETG or a similar…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
29
Rating
4
P
PrintablesAinon3Dtisk

Stain dripping from the edge

Hello, Today I have for you a Stain dripping from the edge . It is suitable as a decoration for Halloween! It is like slime :-D. For proper functionality, you need to use a Printing Profile! I used PLA/PETG as the material. No need to use…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
12
Rating
4
P
PrintablesMatthewGTaylor

Kalita Wave 155 Dripper Coffee Filter Crimp

I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
5
Rating
0
P
PrintablesPavel Wojtaszek

Doraz na kleště/ Plier stop to Knipex wire stripping pliers 1262180

Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
13
Rating
3
P
PrintablesSteveW91

Simple Flipper Zero Stand

A basic quick to print stand for F0

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
3
Rating
0
P
PrintablesREMLURELMI

Remix - Wifi Devboard Case for Flipper Zero with Button Labels

Recommended print settings: Material: PLA or PETG Layer Height: 0.1 mm Infill % : 15+ Supports: No Print Orientation: Default as modeled Raft: No Brim: No Add a color change at layer 3 for contrast in the text.

Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
2
Rating
0
P
PrintablesRetromanIE

Amiga CD32 TF328 Kipper2k v6 Exp adapter Back cover

A work in progress back cover for the Amiga CD32 TF328 Kipper2k v6 Exp adapter. It works as it is now, but needs more attention to really make it perfect. Print instructions Can be printed in any resolution really, but 0.2 seems like a…

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
2
Rating
0
P
PrintablesDirk Hofmann

No-scratch Feet for Stokke Tripp Trapp

Replacement feet for Stokke Tripp Trapp Attach a self-adhesive felt glider (3mm plus thickness) cut to fit the cutout in the printed part to prevent scratching the floor Autodesk Fusion file included.

Print approx. €0.36–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
2
Rating
0
P
PrintablesRenakaiP

Ender 5 Klipper Electronics Case

NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…

Print approx. €6.10–€7.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
13
Rating
0
P
Printablesbuchnema

Replacement connector for Dickie Toys Mega Crane Gripper

Shortly after christmas we got the first accident. So I made this replacement connector for the gripper arm of the Dickie Toys Mega Crane . Print the part lying on its side for sufficient tensile strength. A small added support part…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
8
Rating
0
P
PrintablesFH

KLIPPT for Cylindrical Objects

I just recently needed additional cable guiding capacity on some Elgato Master Mounts. I did all my cable management with KLIPPT so, it came natural to adapt the base plate to round things. Putting KLIPPT on a tube is not particularly…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
35
Likes
14
Rating
0
P
PrintablesTechplex

Rokenbok Tipper - for Action Factory

Missing the tipper dump plate for your Rokenbok Action Factory? Look no further!

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
2
Rating
4
P
Printablestuckovajana

Hrošík magnetka barevné bez nutnosti MMU (Hippo magnet without MMU)

Hrošík magnetka (Hippo magnet) Velikost magnetu: 10 x 2mm Varianta s vložením magnetu (pauza) a s lepením magnetu (až po tisku) 4 barvy filamentu – světle šedá, růžová, bílá, černá Velikost vrstvy 0,2 – nastavení vložení magnetu a výměny…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
8
Rating
0
P
Printablestom

Ablage für Zippos/ Shelf for Zippos

Dieser formschöne Halter bietet Platz für 8 Zippo-Feuerzeuge. Die Ausschnitte sind 40 x 15 mm für große Zippos. Die kleinen Zippos können mit dem beigefügten Adapter 33 x 13 mm präsentiert werden. Da das Modell nicht besonders stabil sein…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
2
Rating
0
P
PrintablesZbyněk Král

JAR Dripper

No more wasted dish washing liquid! 👍💰 Print instructions: Material: PETG Layer: 0,15 mm Perimeters: 2 Infill: 25% Supports: No Brim: Optionally This model requires some special settings, more details in the attached 3MF file. Custom…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
7
Rating
0
P
PrintablesPool Noodle

Finger tipped ring holder

So, I tried modifying a hand model so that the fingertips would be supported with organic supports to make this ring holder. I added small bodies to guide the support generations. The thing I didn't manage to do was to make the base…

Print approx. €5.48–€6.70 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
7
Rating
0
P
PrintablesGradyMakes

Side Mirrors Ice Chipper

A Ice Chipper To scrape the Ice off your Side Mirrors/ Review Mirrors.I Scaled it up 25%

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
8
Rating
0
P
Printables3DHippo

Fancy Baby Hippopotamus

I modeled this because I felt like it. Also I wanted to model my profile picture. I hope you enjoy it as well! If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep…

Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
5
Rating
0
P
Printableskiam02

Handles for skipping rope

Handles for skipping rope hexagon The ball bearings on the handles of the skipping rope were rusty. Doubbel unders are no longer suitable for fast rope jumping. The 2.5mm thick rope can still be used. So decided to construckt a handle…

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
4
Rating
0
P

Piggy-hippo

Piggy keychain, created in meshmixer. Free for any use.

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
3
Rating
0
P
PrintablesJoseph Morton

BagClippie - Reusable Bag Clip

Food waste is a massive problem, with the BagClippie you can combat non-resalable bags to prevent your favourite snacks going bad in your kitchen. One third of food produced globally lands up in people's bins, This reduces Food security…

Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
5
Rating
0
P
PrintablesTechplex

Rokenbok Action Factory - Tipper Retaining Plate

Do you have a Rokenbok Action Factory missing the plate that holds the tipper? Here is the part for you!

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
2
Rating
0
P
PrintablesBruno Germany

Dipping cup cover

The cream cheese cups are often more informative then beautiful. Put the cup into the cover and you have a nice object on the table. There are so many different sizes of packaging (shape and height). My first cover fits perfectly for some…

Print approx. €1.87–€2.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
2
Rating
0
P
PrintablesF Engineering

ISO 7000-0083 low beam, dipped beam

EN: To identify the control that activates the moderate intensity, forward illumination. To indicate the operational status of the low beam function. DE: Zur Identifizierung der Bedienstelle des Abblendlicht. Zur Anzeige des…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
0
Rating
0
P
PrintablesFab Lab Siegen

Screw clamp gripper; Bessey KliKlamp

This gripper can be used instead of the original level to fix pipes or round material.

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
3
Rating
0
P
Printableshvrkh

Tommee Tippee diaper bins refill reduction

Úprava velikosti otvoru kartuší pro Tommee tippee plenkové koše. Smysl je jednoduchý, nové nálpně do košů stojí klidně 500Kč za 3 kusy. Vedle toho ale existuje prodej plastového/fóliového rukávu, který také stojí 500Kč v návinu 200m. Tedy…

Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
5
Rating
0
P
PrintablesIan Darwin

AM4 Ryzen CPU shipping protector

The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
2
Rating
0
P
PrintablesZach

BMW Cooling System Bleed Screw Nipple

I was tired of the coolant making a mess in the engine bay whenever I had to refill the cooling system. This tool screws into the bleed screw port and allows you to attach some 3/8" tubing. This stops coolant from spilling and allows you…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
3
Rating
0
P
PrintablesKRENN DESIGN

Ripple Tripod Lamp

Ripple Tripod Lamp A modern, stylish tripod desk lamp featuring an organic ripple-patterned shade designed to add warm ambient lighting to any room. Simple, clean, and quick to assemble! Bulb & Hardware Compatibility: Designed for a…

Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
6
Rating
0
P
PrintablesGrant M

Cute Hippo Clip - With jaw that opens and closes

Squeeze to open jaw and it will automatically close when let go. Use it for binders, chip bags, or anything that needs organization.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0

Tripple Wall Mount, UMS V1

Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
2
Rating
0
P
PrintablesFranspai

Pingegua NRF24 for Flipper Zero v1.2 Case

A remix for the case to work with the Pingegua NRF24 for Flipper Zero v1.2. In the original the dimentions for this model are off for goldpin locations, chip shield and antenna. I also added 1mm thick layers on top of goldpin and chip…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
PrintablesKat

Protection for whipped cream (for german cups )

If you like to go shopping by bike or with a backpack you know the problem. Where and how do I put the cream cup that it does not break and everything in the bag is divided up evenly. Therefore, here now comes the solution. I have a…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
2
Rating
0
P
PrintablesAhmed Taha

Redesign Kettle Tipper

This is a two part model prototype that can also be scaled if needed to be bigger. This is a two-part model prototype consists of a stable base and a pivoting mechanism designed for securely holding and tilting the kettle. Both parts…

Print approx. €6.55–€8.00 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
1
Rating
0
P
PrintablesReesesben

Angled Holder for Fine tipped Sharpie

Prints platform down no supports required.

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
4
Rating
0
P
PrintablesArnys_Workbench

Clipper Buddy Honigwabe

Das hier ist an sich dasselbe Modell des originalen Creators aber ich habe eine weitere Öse hinzugefügt um das Handling einfacher zu machen.

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesDevise3D

Rotating Gripper Vice Attachment

Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…

Print approx. €3.78–€4.61 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
Printablesheinz

Geschicklichkeitsspiel Wippe

Die Abdeckplatte sollte wegen der Rutschhemmung in Flex gedruckt werden. Für alle anderen Teile genügt PLA

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesHenk

Project TippeTop

Tippe Top Project As a little boy—a long, looong time ago—I had a small spinner that would flip itself over when started correctly. Recently, I decided to recreate that toy using 3D printing. This became much more than a single model. It…

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
0
Rating
0
P
Printablesdawe

Čep vozíku/ Tipper

Hlava čepu 10x10mm, střed 7,5x7,5 mm, nejmeší část 3,5x3,5 a last segment 7,8x7,8. celková délka 260mm Pin head: 10x10mm, center part 7,5x7,5, cap 3,5x3,5, cap 7,8x7,8, total lenght 260mm PLA works well 0,25 mm DRAFT 40% infill supports…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
2
Likes
1
Rating
5
P
PrintablesBorderlands

Ripper Mask - Borderlands 4

The Ripper mask, an iconic piece of chaos from Borderlands 4 , is now available for 3D printing. We've designed it with handy attachment points for straps, making it easy to create and wear. AVAILABLE NOW! Get your copy of Borderlands 4…

Downloads
30,941
Likes
4,742
Rating
4.89
P
Printablesdavemoneysign

Drippy Bucket

I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…

Downloads
26,481
Likes
8,264
Rating
4.98
P
PrintablesLoboCNC

Zippy Bag Clip (print-in-place-ish)

This clip is actually a working zipper with rows of little fingers to cinch your bag shut. It does require some assembly. OK, the work required for this bag clip is way more than any bag clip should require, but once assembled, you'll…

Downloads
24,795
Likes
9,413
Rating
4.44

Tetrahex Ripple Vase

Print with 0 infill, 0 top layers, and 3 walls.

Downloads
20,596
Likes
5,486
Rating
4.93
P
Printablesfivesixzero

Case for Flipper Zero Wi-Fi Module v1

Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…

Downloads
18,167
Likes
1,126
Rating
4.93
P
PrintablesNasBoc

Shipping Container

Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…

Downloads
17,924
Likes
2,512
Rating
4.96
P
PrintablesMisterJ

Zipper Slider Replacement - V3

Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…

Downloads
13,817
Likes
6,246
Rating
4.95
P
PrintablesFH

KLIPPT - Locking Cable Clip

We are thrilled to announce the release of our successor to KLAMMA, the culmination of countless hours of design work and dedication. This new version represents a significant milestone in our journey, building on the strong foundation…

Downloads
11,965
Likes
3,634
Rating
4.94
P
Printablesdavemoneysign

Drippy Bucket With Divider Insert

Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…

Downloads
9,319
Likes
3,232
Rating
4.97