Search results: jet

Sort order

2,155 models

P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
42,152
Likes
8,919
Rating
4.87
P
Printablesagepbiz

Surprise Egg #6 - Tiny Jet Fighter

Print-in-place and Articulated Surprise Egg #6 - Tiny Jet Fighter 'Making of' video: https://youtu.be/hjCWHOE4sb8 Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the jet fighter and the egg was each…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
7,554
Likes
1,247
Rating
4.86
P
PrintableslayerCraft

Jetson nano case

I found this case for the jetson nano and I liked the pattern. The extra height required for the fan was something I did not need. As such, I made a similar model with the same pattern. The jetson nano pcb requires 2.5mm screws. As I only…

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant

Downloads
742
Likes
22
Rating
5
P
PrintablesKubiV

LEGO Cody Jetpack

Printable jetpack for LEGO minifigure of commander Cody form Star Wars

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
482
Likes
54
Rating
0
P
PrintablesAlex

Jet Engine Business Card Holder

This is a spinning business card holder that when full looks like the first stage of a jet turbine. My dad has just retired after 46 years of commercial flying. I printed this to help him "celebrate" the conversation of a cockpit to an…

Print approx. €16.75–€20.48 excl. taxPreliminary estimate for one variant

Downloads
446
Likes
107
Rating
0

Fighter Jet

The YF-27 "Wasp" is a highly detailed, 3D-printed prototype fighter jet , inspired by the agility of the F/A-18 Super Hornet and the stealth technology of the F-22 Raptor . Fully Articulating Flaps – for aerodynamic accuracy and control.…

Print approx. €2.71–€3.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
294
Likes
99
Rating
0
P
PrintablesThrorin

HP DesignJet 500 - 24inch Roll Paper (Spool Holder)

My colleague had this plotter but the fins from one of the spool holders were cracking and finally broke off. He asked me if i could print one for him and i said yes. At first i did some search for a replacement part for the Spool Holder…

Print approx. €4.26–€5.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
10
Rating
0
P
PrintablesXavier Marquet

Jeton Charette

Wave keychain. Can also be use for a cart.

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
141
Likes
8
Rating
5
P
PrintablesPeter Farell

Jet-Vac (light) Skylanders

Jet-Vac (light) Skylanders

Print approx. €15.66–€19.14 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
21
Rating
0
P
PrintablesVincja

Jtronics Jet Boat Moded Propeller

I have runed this boat with 2205 brushless motor and 2 x 18650 lion and was fast as hell. To build this awesome boat check the original link below https://cults3d.com/en/3d-model/game/rc-mini-jet-boat

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
15
Rating
0
P
PrintablesPeter Farell

Gum from Jet Set Radio

Gum From Jet Set Radio. Gum (ガム, Gamu ) is a Rudie living in Tokyo . She is a member of the GG's , in Jet Set Radio Future . She acts as a teacher towards Yoyo at the beginning of the game, mirroring her role in the first game .

Print approx. €7.49–€9.15 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
16
Rating
0
P
Printablesariadnafx

Sherlock Holmes bookend sujetalibros

Bookend for you Sherlock Holmes book collection.

Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
12
Rating
0
P
PrintablesIsaac Diggs

Jetons (Poker Chips) with Spartans Rising Logo

Jetons for a casual Poker night. I designed these with the logo of my german Gaming Clan Spartans Rising (we do have some Gaming Montages on Youtube) these are printed in PLA and 0.15mm layer hight ( I tried to include a variable layer…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
77
Likes
20
Rating
0
P
PrintablesRaphhorn

Yamaha Superjet/Waverunner Fire Extinguisher Cap

printed in PETG & TPU not 100% Watertight but it has a decent fit i uploaded the f3d file so if you edit it to be watertight may share a remix of this :)

Print approx. €5.78–€7.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
65
Likes
3
Rating
0
P
PrintablesFranky 71

Jetons Caddie - Caddie Tokens

Mesdames, Messieurs, Ne cherchez plus un jeton dans vos poches ou au fond de votre sac, chercher plutôt un caddie de libre, le reste vous avez avec vous… ✅ 1.- ✅ 2.- ✅ 1 € ✅ 2 € Modifications: 22.04.2025 profondeur d'extrusion modifiée.…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
5
Rating
0
P
PrintablesDavid

Tope puerta, sujeta puerta

Sistema de tope de puertas con manetas, además se puede dejar sujeta la puerta para que se mantenga cerrada.

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
2
Rating
0
P
Printablesrlfigueiredo

Wall Mount for iRobot Braava Jet m6 Mopping Pads

Wall Mount for iRobot Braava Jet m6 Mopping Pads

Print approx. €9.66–€11.81 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
6
Rating
0
P
PrintablesSpockandlock

Jet Band Saw Throat Plate

This is used to replace the Jet throat plate for a band saw.

Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
6
Rating
0
P
Printablesisaiah

49ERS jet fighter

this is A simple 49ERS jet fighter

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
8
Rating
0
P
PrintablesCooper'sRower

JetPens Kanso Noto Journal Holder

This is a holder for a JetPens exclusive Kanso Noto notebook. For those who don't know, the Kanso Noto is a notebook filled with delicate paper for writing on with fountain pens. It can be found here ! Since the pages are so delicate, I…

Print approx. €7.71–€9.42 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
11
Rating
0
P
PrintablesNacho Nieto

Sujeta pinceles/cepillos de dientes/palillos chinos estilo japones Japan style

Las medidas de la foto están en mm por lo que realmente son unos 6'5 cm de ancho y 3'7 cm de alto aprox.

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
7
Rating
0
P
Printablesatom

High pressure washer shower head jet tip

The model is inspired by https://makerworld.com/en/models/1265553-shower-head-print-head-with-small-aperture , but it is original creation created from scratch. I was unhappy with the original model, the print quality was not the best,…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
4
Rating
0
P
PrintablesGrogg3D

JetKVM Under Desk Mount (Remix - Slim & added Cooling)

This remix has a reduced the profile (X Axis) so it has a slimmer/narrower profile , it will fit into tighter spots, and corners. I have moved the mount holes to centre of the model, using 3.5x25 screws . And the bracket is good for a…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
3
Rating
0
P
PrintablesJrprusa

Jetboil Collapsible Cup Storage Addition

Description: This model is designed to sit on the top (or bottom) of a Jetboil flash 2.0. The storage cup holds 4x Sea to Summit collapsible cups (https://seatosummit.com/en-ca/products/frontier-collapsible-cup). Holes on the bottom are…

Print approx. €8.36–€10.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
2
Rating
0
P
PrintablesJer

Jet 14-DXPRO Bandsaw Belt Tension Reminder

The Jet 14-DXPRO bandsaw has a tensioner handle behind the top wheel and nearly out of sight. I'm not used to tensioning the blade before use and de-tensioning when done yet, so I made this cover for the power switch that should prompt…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
1
Rating
0
P
Printablesh2odragon

ACME Jet Bike sign

100x160mm sign, advertising the ACME Jet Bike. The new and improved model features brakes; an important innovation. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with…

Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
1
Rating
0
P
Printables3DJay

Jet engine spiral 5015

spiral step 5015. spiral for prusa mk4 fans coming soon

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesCATIAV5FTW

3D Printable Jet Engine

A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with visual cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there's some resemblance there...…

Downloads
15,616
Likes
5,640
Rating
4.95
P
PrintablesGamerForge

Star Wars The Mandalorian Full Costume/Cosplay (Helmet, Armor, Jetpack, Blaster etc.)

I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…

Downloads
11,948
Likes
2,888
Rating
4.86
P
Printables3_Dave

TwinJet Speedboat

If you like this model, please follow my profile - it will help me a lot 😎 TwinJet Speedboat is a lightweight, balloon-powered water toy designed for quick, repeatable launches. The first two gallery images are visualizations created…

Downloads
10,817
Likes
2,634
Rating
4.76
P
PrintablesCasaPrint3D

Turbofan aroma diffuser - Car vent mini Jet engine

This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…

Downloads
10,048
Likes
1,684
Rating
4.88
P
PrintablesHarrison

NVIDIA Jetson Orin Nano Developer's Kit Case

Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…

Downloads
6,982
Likes
174
Rating
4.95
P
PrintablesLinus3d

3d Printable Turbojet Engine

Introduction The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet, afterburner and variable exhaust nozzle. This conversion uses…

Downloads
5,785
Likes
2,338
Rating
4.95
P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Stand

This is a modified version of my Surprise Egg #6 - Tiny Jet Fighter, but bigger, smoother and with a stand https://www.prusaprinters.org/prints/10652-surprise-egg-6-tiny-jet-fighter Commercial license Do you want to sell prints of this…

Downloads
5,694
Likes
887
Rating
4.87
P
PrintablesQuizque

Jett's Kunai - Valorant

Modified from WF3Ds to fit the one from the game a bit more and to make painting a tad bit easier. Recommended printing vertically with supports (tree supports work wonders on this). NOTE: some printers can handle the overhang with no…

Downloads
4,957
Likes
486
Rating
4.89
P
PrintablesTX_Ryan

Ender 3 S1 Twin Jet 5015 Fan Duct

Update : Revised STL to rotate matching recommended print configuration and repaired non-manifold issue some people experienced. The stock S1 cooler isn't exactly great, and I wanted a bi-directional cooling design with a stronger 5015…

Downloads
4,482
Likes
715
Rating
4.71
P
Printablesagepbiz

Print-in-place and articulated MiG-23 Jet Fighter with Improved Wingdesign

Projectvideo (F14 with breakaway): https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real MiG better, while still being print-in-place and articulated.…

Downloads
4,412
Likes
875
Rating
4.82
P
Printablesccc6501

Jet Engine

Remix of 3D Printable Jet Engine by Catiav5ftw and calebfwood. Grouped and sliced for Mini+

Downloads
3,940
Likes
1,351
Rating
4.8
P
PrintablesJace1969

F-18 Fighter Jet

Found this really cool jet over at the 3D where house made by Tony https://3dwarehouse.sketchup.com/model.html?id=4ed01f44e3e422dff64801ad2940cdd5 Seperated out and cleaned up the files as best possible. Certainly enough pieces here to…

Downloads
3,532
Likes
303
Rating
5
P
PrintablesAlexMu

3D printed RC Jet boat OLD DESIGN

NEW DESIGN: https://www.printables.com/model/496157-jetboat-hull-new-design Boat for wild river runs. There is a hull extension available to extend the boat length. THERE is a new hull design:…

Downloads
3,038
Likes
459
Rating
4.44
P
Printablesagepbiz

Surprise Egg #13 - Tiny MiG Jet Fighter

Projectvideo: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the toy and the egg was each designed to be print-in-place without any need for support structures. The toy has…

Downloads
2,942
Likes
502
Rating
4.88

RC Jet Boat

Hi guys, this is my 1st Jet Boat, made in 2021, fully 3D printed. This is an easy project to print and assemble. Youtube video link: youtu.be/52TS3p7NUL0 In the instruction manual are images of the assembly of each part of the boat and…

Downloads
2,845
Likes
370
Rating
5
P
PrintablesZswickliffe

Jet Engine - working compressed air turbofan by rndmframes_printing

This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…

Downloads
2,620
Likes
495
Rating
5
P
PrintablesMakerTom

Gardena System Watering Jet HF (high flow)

I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden. So i tried many different designs by myself and came to this simplified…

Downloads
2,611
Likes
801
Rating
4.82
P
PrintablesJaredC01

JetKVM 1U Rackmount

Hey all! If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor. You're in luck! Below I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing…

Downloads
2,485
Likes
218
Rating
5
P
PrintablesIsaiah 3DP

Fighter jet F18

Printer used: Anycubic Kobra Plus Layer height: 0.2 Brim: yes Raft: no Supports: Yes

Downloads
2,252
Likes
171
Rating
4
P
PrintablesUseless Designs

Modern Jet Fighter (Based Roughly Off Of The F15 StrikeEagle)

I roughly based the aircraft off of the American F15 Strike Eagle.

Downloads
2,236
Likes
97
Rating
4.88
P
PrintablesCATIAV5FTW

High Bypass Jet Engine Fan

A high bypass fan inspired by Rolls-Royce's Trent series turbofans. The fan blades print separately from the disk and are designed to slide in, just like a real fan. The blades can stand up on their own, and the whole fan can also balance…

Downloads
2,236
Likes
297
Rating
4.75
P
PrintablesKarkovski

Jet engine extruder indicator

An extuder motor indicator made from a 3D Printable Jet Engine's fan by CATIAV5FTW - scaled down to 25%, with a cone or without. Link to this awesome printable jet engine here: Thingiverse There are three versions: With an integrated cone…

Downloads
1,946
Likes
305
Rating
4.85
P
PrintablesRandall Krall

J57 turbojet Engine and stand

So, I was making a CF-101B voodoo display for my grandfather and decided to make a J-57 turbojet engine (or something that approximates it) to go along with the airplane. The goal was to make a simple turbojet that went together w2ithout…

Downloads
1,925
Likes
871
Rating
5
P
PrintablesSzymon Adamczyk

F-16 Fighting Falcon print-in-place micro jet fighter

About the F-16 Fighting Falcon The F-16 is an american single-engine supersonic multirole fighter developed by General Dynamics for the US Air Force. It was designed as an air superoirity day fighter, but evolved into a succesful…

Downloads
1,914
Likes
137
Rating
4.88
P
PrintablesAndrew W

Water Jet Pump - Jet Drive 54mm - Pump Jet

This is a 54mm jet drive that can be used for an RC boat. I used two of them for an electric surfboard. I designed these jet pumps because I couldn't find anything that met my needs. I hope they are of use to someone who is looking for a…

Downloads
1,773
Likes
228
Rating
5

Grassy Terrain Flexigrid by jetpad

This model was made by jetpad! You should follow him! He works with fidgets, upgrades and a COLOR MIXING PRINT! If jetpad wants to take the printables version down, he can. He just needs to ask. By the way, thanks for like, 1000…

Downloads
1,746
Likes
43
Rating
5
P
PrintablesAaronTMG

F15 American jet fighter

The McDonnell Douglas F-15 Eagle is an American twin-engine, all-weather fighter aircraft designed by McDonnell Douglas (now part of Boeing). Following reviews of proposals, the United States Air Force (USAF) selected McDonnell Douglas's…

Downloads
1,729
Likes
73
Rating
3
P
PrintablesAlexMu

JetBoat Hull new Design

This hull works with all the parts of this model: https://www.printables.com/model/51680-3d-printed-rc-jet-boat/comments/897854 https://youtu.be/-7sSGXb9A3U?si=2WvybAz3n-ELLGuw jet housing is included in this model. The deck has to be…

Downloads
1,719
Likes
176
Rating
4.83
P
PrintablesAdudino

SR-71 & F-35: Dual-Colour Toy SR 71 and F 35 Jet (Blackbird SR-71 = SR71)

- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…

Downloads
1,703
Likes
394
Rating
4.9
P
PrintablesRamjetX

RamjetX Thrustmaster T300 T500 TX TSPC 70mm Hub Adaptor Kit

Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…

Downloads
1,533
Likes
86
Rating
5
P
PrintablesJace1969

FA-37 Talon Stealth Fighter Jet

Hi Keo, these particular models are a little out of my depth and what I've discovered is they need to have the wholes on the mesh fixed up first before they can become a solid. Something I have yet to learn about in Sketchup. As this…

Downloads
1,521
Likes
143
Rating
4.5
P
Printablespachek

Jet Engine (manual) Fan

An accesory to be used with my rotating machine print . Print on the given orientation, no suports required.

Downloads
1,474
Likes
284
Rating
5
P
PrintablesSzymon Adamczyk

F/A-18 E/F Super Hornet print-in-place micro jet fighter

About the F/A-18 Super Hornet The Boeing F/A-18E and F/A-18F Super Hornet are a series of American supersonic twin-engine, carrier-capable, multirole fighter aircraft derived from the the McDonnell Douglas F/A-18 Hornet . The Super Hornet…

Downloads
1,444
Likes
120
Rating
5
P
Printablesagepbiz

Print-in-place and articulated MiG23 Jet Fighter with Stand

Projectvideo: https://youtu.be/zUH6NLYGv7Q This is a modified version of my Surprise Egg #13 - Tiny MiG Jet Fighter, but bigger, smoother and with a stand https://www.prusaprinters.org/prints/66335-surprise-egg-13-tiny-mig-jet-fighter…

Downloads
1,416
Likes
287
Rating
4.78
P
Printablesironfan72

Fighter Jet Bookmarks Volume 2

Quick and easy to print bookmarks with a fighter jet theme. Includes F-14, F-35, A-10, Tornado and Typhoon (yeh I know the A-10 isn't a fighter!) I've included several variants of each bookmark including facing up or down and with or…

Downloads
1,343
Likes
259
Rating
5
P
PrintablesEvan Showalter

Shallow Water Rc Jet Boat

Parts (what I used) Bronze Bushings - https://www.amazon.com/gp/product/B07JLPC8TS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Shaft Couplers - https://www.amazon.com/gp/product/B0867P8H6D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1…

Downloads
1,327
Likes
176
Rating
5
P
PrintablesWF3D

Jett's Blade Valorant

This is Jett's Blade from Valorant. Have fun. ;) Notes: You can print it in one piece, standing upright. Only use supports in the middle for the ring. Otherwise it prints perfectly. :)

Downloads
1,326
Likes
145
Rating
5
P
PrintablesBash_Tech

RC Jet Boat Bashtech

Update 08.05.2020: we used the motor: https://hobbyking.com/de_de/propdrive-v2-series-4248-650kv-brushless-outrunner-motor.html?queryID=821f8e5965ad229ef4e011a419d1228a&objectID=59142&indexName=hbk_live_magento_de_de_products ESC: 70 amp…

Downloads
1,273
Likes
193
Rating
4.71
P
Printablesagepbiz

Tiny Multicolor Jet Fighters - Print-in-place and Articulated

https://www.instagram.com/p/C0ZsZbDrwg0/ What if Blue Angels used F14?! Tiny 3d printable print-in-place and articulated f14 in colors inspired by the Blue Angles! The built in wingtip support breaks of with a satisfying snap and leaves a…

Downloads
1,260
Likes
396
Rating
5
P

custom attachments for WOLFBOX MF50 Electric Air Duster Jet Fan

Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…

Downloads
1,234
Likes
275
Rating
5
P
PrintablesBaran Tunc

Jetson Orin Nano Case

Jetson Orin Nano case I made for myself. Bottom part has 2 versions for one with PCI slot screw holes and the other is without them. Feel free to delete the mark "gears.com.tr" if you wish. For extra tidiness I punch 2 small holes with…

Downloads
1,211
Likes
36
Rating
4
P
PrintablesSzymon Adamczyk

F-35 Lightning II print-in-place micro jet fighter

About the F-35 Lightning II The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, supersonic stealth strike fighters. A multirole combat aircraft designed for both air superiority and strike missions,…

Downloads
1,140
Likes
106
Rating
4.83
P
PrintablesHyrax

Fighter Jet F-18 Like

A remix of Figter Jet v2 from Edie S. I redesigned the wings a bit more close to the F-18 design. Can be printed from two separate parts without supports and then glued together. Print was tested with PLA. Edit 17.09.2022: Added non-split…

Downloads
1,131
Likes
82
Rating
5
P
PrintablesSlanjonok

Jet another Vallejo/Citadel-Paint holder, standalone version 4x4

This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…

Downloads
1,098
Likes
151
Rating
5
P
PrintablesMistertech

Modern Jet Turbine Fan Fidget Spinner

This is the modern version of my other Jet Turbine Fan Fidget Spinner. I designed this to resemble todays' "Fan" section of a jet turbine engine. Simply blowing on it will spin it. The fan is directional. Due to the curve of the blades,…

Downloads
1,097
Likes
141
Rating
4.6
P
PrintablesSzymon Adamczyk

Su-27 Flanker print-in-place micro jet fighter

About the Su-27 Flanker The Sukhoi Su-27 is a Soviet-origin twin-engine supersonic and supermaneuverable fighter. It was intended as a direct competitor for the large US fourth-generation jet fighters such as the Grumman F-14 Tomcat and…

Downloads
1,059
Likes
84
Rating
4.5
P
PrintablesShikko

Rafael Fighter Jet

Its a rough design of Rafael fighter jet, note: it won't fly. If you like my 3D models. Please consider buying me a coffee : https://www.buymeacoffee.com/Shikko15

Downloads
1,033
Likes
82
Rating
4
P
PrintablesHJ_3D

Water jet for a tubular pool / Jet d'eau pour piscine tubulaire

Water jet for a tubular pool to be fixed onto a bar (maximum bar diameter 60mm) and connected with a hose to the pump outlet. The hose used is the one provided with a classic hydraulic robot. The water inlet diameter is compatible with…

Downloads
1,024
Likes
356
Rating
5
P
PrintablesTeque5

Jetson Nano Case (Vented)

Jetson Nano Case A minimal snap-fit case for the Nvidia Jetson Nano. The original design ( thing:3603594 ) by ecoiras was very well done, but I prefer cooling over the logo. This is for the 4GB kit with all the ports, but I imagine also…

Downloads
1,012
Likes
34
Rating
5
P
Printablesironfan72

Fighter Jet Bookmarks

Update 05/15/2022 Now includes two different orientations for each bookmark as my kids wanted it to look like the jets were flying out of the book ;) Details Three quick and easy to print bookmarks with a fighter jet theme. Includes F-16,…

Downloads
1,009
Likes
148
Rating
4.8
P
PrintablesWind_Redrock

Horten Ho-229 WW2 Era German Flying Wing Fighter Jet

Horten Ho-229 WW2 Era German Flying Wing Fighter Jet

Downloads
1,007
Likes
52
Rating
0
P
PrintablesBillyBones

Jett Valorant Keycaps

This was made because I couldn't find any free keycap designs on Thingiverse so here you go. Please let me know if you want me to make keycap sets for any other Valorant character's abilities. I will try to get back to you as soon as…

Downloads
1,001
Likes
56
Rating
4.2
P
PrintablesKyne

Bumper Car Chip Autoscooter Jeton

It is difficult to print this accurately since there is no good orientation. The originals (in colour) are most probably injection moulded. I printed it horizontally , the top side came out amazing with ironing but the bottom side…

Downloads
992
Likes
27
Rating
5
P
PrintablesLinus3d

Turbojet Stand

Description This stand is heavily inspired by peteyen86 . Adding some details and making the jet sit lower to the ground. It works great! Easy to print with tree supports. Check out the Afterburner & Variable Nozzle for the turbojet this…

Downloads
989
Likes
136
Rating
4.89
P
PrintablesMatyáš Flek

jett valorant

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Downloads
954
Likes
53
Rating
0
P
PrintablesAlex

Approximately Gripen model jet fighter

made using 3 views from the internet I didn't have accurate fuselage and wing sections so everything is just an approximation, maybe someone that has foaming filament can use it to make an edf rc plane out of it

Downloads
940
Likes
85
Rating
4
P
PrintablesWind_Redrock

Late-WW2 Era German Fighter Jet Messerschmitt Me-262

Late-WW2 Era German Fighter Jet Messerschmitt Me-262

Downloads
936
Likes
71
Rating
5
P
PrintablesN7 Cat

RC Boat - Pump Jet Boat / 遥控船-喷射泵

Needz MOAR boat? U can haz 4/3 moar here: https://www.printables.com/model/413647-rc-boat-pump-jet-boat-large-yao-kong-chuan-pen-she Note I am seeing copies of my design being posted by other users in violation of site TOS - I am the…

Downloads
914
Likes
200
Rating
5
P
PrintablesNairck

3D Printable Jet Engine - V3 Turbofan Driver (update complete)

The V3 release features a new custom PCB by Cyberfox361, revitalized electrical design, many bug fixes and upgrades to software, improvements to the overall shaft-alignment, new components, bill of materials, and the introduction of…

Downloads
913
Likes
553
Rating
0
P
Printablespunisher_1211

Simple Jet Plane

Simple Jet Plane

Downloads
912
Likes
46
Rating
5
P
PrintablesDallatorre

F-35 Stealth Fighter Jet | Desktop Stand and Phone Holder

A while ago I found this F-35 cad model. It inspired me to create this. unfortunately my printing and painting skills are terrible.

Downloads
904
Likes
70
Rating
5
P

JetKVM 10-inch rack mount - With Keystone slots

A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…

Downloads
901
Likes
110
Rating
5
P
PrintablesNick Pagazani

Desktop Jet Engine With Motor

I was looking to create a desktop fume extractor, but wanted a jet engine look. @CATIAV5FTW_1217083 's model had what I was looking for, though it needed some work to get it into something workable as an actual fan and not just a display…

Downloads
890
Likes
181
Rating
5
P
Printablesmdpro For PC

Jet Fan - fully 3d printed

what you need: 1- brushless motor ( 2212 2.5mm mount - 1000KV or higher) 2- ESC 30A 3- Servo motor tester 4- dewalt battery* no need for an insert you can use any 4 CM scrow, but you can have them if you want for all info check the “…

Downloads
886
Likes
114
Rating
0
P
Printables3docity

Milwaukee M18 Compact Blower Small Air Nozzle Jet

This is a nozzle that fits onto the Milwaukee m18 compact blower that I designed to be more of a jet. The original nozzle has a larger opening so I made this with a 10mm diameter opening to make it easier to blowing out my vacuum filters.…

Downloads
877
Likes
113
Rating
4.6
P
PrintablesModu

Turbo Fan / Jet Fan - Magnetic Nozzle (15mm)

This is an alternative nozzle for a Turbo Fan/Jet Fan, featuring much higher nozzle pressure than the stock version. In my opinion, it offers the perfect balance between pressure and airflow. There's a small notch on one side, which…

Downloads
856
Likes
135
Rating
5
P
PrintablesFlyAttack

Nvidia Jetson Nano Case – NanoMesh Mini

NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…

Downloads
849
Likes
39
Rating
5
P
PrintablesMDBDesigns

Fallout Jet-Prop

This is the Fallout 4 inspired Jet inhaler! Need to get an edge on your cosplay? Got an itch you need scratched? Look no further! This Jet prop will have you flying through your cosplay in no time! Make one, make a dozen! You can never go…

Downloads
844
Likes
177
Rating
5
P
PrintablesSzymon Adamczyk

MIG-29 Fulcrum print-in-place micro jet fighter

About the MIG-29 Fulcrum The Mikoyan MiG-29 Fulcrum is a twin engine fighter aircraft designed in the Soviet Union. It was developed as an air superoirity fighter during the 1970s. The MiG-29 was developed to counter U.S. fighters such as…

Downloads
819
Likes
71
Rating
5
P
Printables3D-Muc

Glider Jet Model for advertising - give aways

Small aviator for a gift at a model building show. At our exhibition I printed the planes with my Delta printer and gave them away to children. One template is with text and one without for your own text. The model is flat at the bottom…

Downloads
815
Likes
70
Rating
5
P
PrintablesCrazyBird199

Lucky 13 Mandalorian (With Jetpack and Rifle!)

I have modified and collected some Mandalorian parts for Lucky 13. All parts were printed at 0.15 or 0.20 unless otherwise stated. They were all printed on the Prusa MINI as well. Creators, if you see your stuff here and don't want it…

Downloads
810
Likes
286
Rating
5
P
PrintablesForker45

Pro Boat Sprintjet Upgrade Parts

Overview I converted my son's Pro Boat Sprintjet 9" boat to run a 1806 brushless outrunner motor, standard RX41 receiver, & 20A BL ESC. I designed a few parts to optimize the performance with the new drive system. Here they are… 3-Blade…

Downloads
797
Likes
35
Rating
5
P
PrintablesMike Ant

Gardena Watering Jet / Zalévací tryska Gardena

The original model by MakerTom didn't suit me at all, as I use a rain water tank pump for watering, which has a lower water pressure than has water supply line. The original jet had a throw distance about 1.5 meters with the pump.…

Downloads
776
Likes
143
Rating
5