Search results: jw

Sort order

140 models

P
Printableschemteacher628

Unfolding James Webb Space Telescope (JWST)

This model includes almost all of the deployment steps of the James Webb Space Telescope including: Solar Panel Antenna Fore and Aft Sun Shield Pallets Left and Right Sun Shield Boom Extension Aft Momentum Flap Tower Deployment Secondary…

Downloads
3,209
Likes
2,534
Rating
4.94
P
PrintablesIn3DSpace

JWST Drink Coaster

Drink coasters inspired by the James Webb Space Telescope primary mirror. Fits drinks up to 3.5" diameter. Available in four surface patterns: Triangles Circles* Linear Matte Gcode and 3MF files include color change and infill patterns…

Downloads
1,595
Likes
839
Rating
4.98
P
Printablestallen8

Remix JW cart model kit

This is a remix I made to be printed as a kit all together. This makes it easier to hand out as gifts for friends and recommended for a family worship project. I'll also include an instruction card with publications that are sized for…

Downloads
857
Likes
72
Rating
5
P
PrintablesTheIgorMC

James Webb Space Telescope (JWST) - Full model

Hello fellow space exploration enthusiasts! I made a small replica of the James Webb Space Telescope, as close to the original as I could! The model is fairly complicated as it has lots of pieces and tight tolerances, some parts to glue…

Downloads
806
Likes
116
Rating
5
P
Printableskriswillcode

James Webb Space Telescope (JWST) Drink Coaster

This is a simple drink coaster inspired by the mirror of the James Webb Space Telescope. The panels are raised, so condensation can easily drain away. It's not 100% accurate, but an artistic interpretation of the mirror. If you're looking…

Downloads
655
Likes
269
Rating
5
P
Printablespolyfractal

JWST Mirror Actuators

This is a replica of JWST's mirror actuators. Six of these actuators are paired into a hexapod / stewart platform arrangement and used to control 6 degrees of freedom of each mirror segment (tip, tilt, roll, x, y, z translation). Video…

Downloads
519
Likes
125
Rating
4
P
PrintablesBitteEinBrot

Ariane 5 and James Webb Space Telescope (JWST)

This is a model of the Ariane 5 rocket carrying the James Webb Space Telescope. The top ist turnable so you can choose to show the opening which reveals the JWST or the front of the hull showing the decals. It's also possible to fold the…

Downloads
488
Likes
130
Rating
5
P
PrintablesTelfonTape

Airsoft JW4 Pit Viper Red Dot Mounting Plate

Since the Pit Viper does not come with a proper mounting for a red dot i decided to make my own. It uses the existing screw that is used to adjust the rear sight, this way no extra hardware is required for mounting. The Red Dot screws tap…

Downloads
416
Likes
23
Rating
0
P
PrintablesHank

James Webb Space Telescope (JWST)

This is a stylized version of the JWST with an enlarged primary mirror with enhanced curvature, since that is the most striking detail of the telescope.

Downloads
336
Likes
128
Rating
4.78
P
Printablesswissmineral

JWST - james webb space telescope Scale 1:100

This telescope proves that cooperation is the most powerful ability of mankind. Since I am so grateful that this wonderful telescope was built and works, I am posting the model here for free download. Scale 1:100 The model must be…

Downloads
249
Likes
56
Rating
0
P
PrintablesLA J

KJW KP-08 Holster

As there is no commercially available holster for the KJW KP-08 i just designed this one off of an 1911 holster. The holes for the pin in the release and the main body may still need a small drill, for whatever pin-size you're using. For…

Downloads
243
Likes
30
Rating
5
P
PrintablesGeorge

Holder for JWST Drink Coaster

I print and love the JWST Drink Coaster but there is no holder. So I made a few ones that can hold 12, 10 or 6 coasters but you could probably scale it on Z to fit your needs.

Downloads
201
Likes
96
Rating
5

JWST Mirror Actuators Refined

A refined version of JWST Mirror Actuators to make assembling easier. Changes include but are not limited to: Tolerance adjustment Some parts split into multiple components to allow easier assembly Add stoppers for bearings to prevent…

Downloads
178
Likes
24
Rating
0
P
PrintablesBooks

James Webb Space Telescope (JWST)

Public domain model of the James Webb Space Telescope (JWST) by DanIGI . Originally uploaded to Blend Swap .

Downloads
176
Likes
16
Rating
0
P
PrintablesERAN.PC

JW VISIT CARD DISPENSER

excellent gift for brothers and sisters in service ministry and a good souvenir for international assembly. ONE PART VER: NO NEED SUPPORT It is recommended to change the color of the filament for the text above. In one part VER, The first…

Downloads
172
Likes
18
Rating
5
P
PrintablesCGaddict

EMG x TTI JW4 Pit Viper Stand

Stand for airsoft gun EMG TTI JW4 Pit Viper. I have measured it from the magazine of mine EMG Pit Viper. Not sure if it will fit other brands or not. Thank you for your interest. :) Printer : Ender3 V2 Neo • Layer Heigh 0.2-0.16 • Infill…

Downloads
154
Likes
9
Rating
0
P
PrintablesAcesEighty8

KJW Cybergun Taurus PT99 Compensator

Just a fun thing for the gun. With rail for attachments. Print Settings Resolution: 0,16 Infill: 10 Category: Other

Downloads
147
Likes
13
Rating
0
P
PrintablesUntangleWORKS

GL9 baseplate styled for WE TECH G series , WA VX-series, HFC AG, KJW KP13 KP17

this baseplate is modeled to look like a Pmag GL9 base plate. this is not 100% the same but it give it the look and feel of one. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Pmag GL9” just like with the…

Downloads
144
Likes
12
Rating
0
P
PrintablesGabe Pari

Airsoft KJW Glock G23 Loader

Airsoft GBB pistol magazine loader for KJW/WE G-series. Slightly narrower than a Hi-Capa, and the hole is lowered by 3mm to line up with the smaller cutout section of the G-series mags. I had to modify the follower on the magazine to give…

Downloads
139
Likes
19
Rating
5

JWST Coaster

This is a coaster based off the James Webb Space Telescope primary mirror. I designed the model in TinkerCAD.

Downloads
134
Likes
27
Rating
5
P
PrintablesCity

Hadley JWST Spider - slotted 10-24 nut inserts remix

I didn't want captured nuts as it requires pausing the print partway through. I plan to make several of these so it helps to save time during the printing process. Other spiders with slots exist, but only for the metric remixes. This one…

Downloads
130
Likes
5
Rating
5
P
PrintablesFREDCHRYS

JW Caleb

https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…

Downloads
119
Likes
15
Rating
0
P
Printablesrhn

JWST flexible ornamental piece

Just a little flexible hexagonal “JWST” ornament/patch/bauble/fidget/coaster piece I accidentally made while test printing swatches for another entry to the “Printed Fabric” contest: https://www.printables.com/model/1452441-flexihex-bowl…

Downloads
116
Likes
50
Rating
0
P
Printableskhyams

JWST Dish (Deconstructed for higher-quality printing)

Due to the curvature of the dish, I wasn't able to get the mirrors, or the back of the dish, to print very well. I separated the backs from the mirrors in Tinkercad and printed them separately with the face of the mirrors on the build…

Downloads
115
Likes
16
Rating
5
P
PrintablesTheIgorMC

James Webb Space Telescope (JWST) - Keychain

This is a pretty simple print, You just need some glue to hold the pieces together. It is based off the real JWST with the outer ring of tiles tilted more towards the center. HOW TO PRINT Print first one “JWST Keychain Base”, make sure…

Downloads
114
Likes
21
Rating
5
P
PrintablesJA3D

Airsoft KJW m9 pistol upper

Reverse engineered from kjw m9. Missing safety assembly. Not meant to be printed as it is.

Downloads
110
Likes
12
Rating
0
P
PrintablesGconley66

Bandsaw Dust Collection - Jet JWBS-14

Update: 3/15/2025 I have added a version of the top part that should have a better fit with the stock blade guides. Although I find the thumb screws on the stock blade guides to cause more trouble than they are worth so I recommend…

Downloads
107
Likes
20
Rating
5
P
PrintablesJavier Rizzo

JWST Drawer Knob

Drawer Knob inspired by the James Webb Space Telescope mirrors. It has a small hole to make it easier to insert a screw, but you might want to change the sizing depending on the screw you're using (I've included the STEP/F3D files), or…

Downloads
106
Likes
53
Rating
5
P
PrintablesBrian.Kuo

James Webb Space Telescope (JWST) LED Wall Panels

Github project link: https://github.com/TrumpetH4X/JWST-LED-Panels Overview I've always enjoyed the honeycomb mirror arrangement of NASA's James Webb Space Telescope (JWST). To commemorate the telescope's launch on December 22, 2021, I…

Downloads
102
Likes
34
Rating
4
P
PrintablesGrigi

James Webb Space Telescope (JWST) Drink Coaster with 18 mirror

"A simple drink coaster inspired by the mirror of the James Webb Space Telescope"

Downloads
101
Likes
32
Rating
5
P
Printables3DJG

JWST Table Mirror

Hexagonal table mirror frame, inspired by the JWST telescope and designed to use IKEA hexagonal mirrors (HÖNEFOSS). The mirror is clipped into its housing and can be disassembled for cleaning and to avoid breaking the edges. It is…

Downloads
98
Likes
58
Rating
5
P
Printablesdrewmoseley

Unfolding James Webb Space Telescope (JWST) Sunshield Template

I had trouble making the sunshield from the descriptions in the other models. I created this as a template that can be glued in place using either Elmer's Glue or CA Glue. The spars can then be cut off with a pair of wire cutters and you…

Downloads
94
Likes
17
Rating
5
P
PrintablesAndrew Nelson

KJW M700 Barrel to M14 CCW Thread Adapter

KJW M700 Barrel to M14 CCW Thread Adapter Fits (snugly) over the unthreaded KJ Works M700 Rifle and adds M14 CCW threads for threading on muzzle devices (E.g airsoft tracer). I made the sleeve that fits over the barrel long so it covers…

Downloads
91
Likes
9
Rating
0
P
PrintablesTalon K

James Webb Space Telescope (JWST) Mirror Assembly Model

With the success of the JWST launch, I thought it would be cool to have a desktop model of the JWST mirror assembly to display on my desk. The model is designed to be printed in two major parts, to facilitate the base and the mirror to be…

Downloads
82
Likes
21
Rating
0
P
PrintablesArnaud S

JWST keychain

Keychain based on the iconic primary mirror of the James Webb Space Telescope. The geometry is simplified. The sides of the mirrors should theoretically be black. However, I decided to print them entirely in gold so the color transition…

Downloads
81
Likes
25
Rating
0
P
PrintablesLastByte

Mini JWST Wall Art

Quickly created to commemorate the successful launch and deployment of JWST. This was been pre-sliced to print from a 220mm x 220mm print bed. The original Solidworks file has been included in case you would like to separate it yourself.…

Downloads
77
Likes
46
Rating
0
P
Printablesmscho24

Jewelry Wall Organizer (JWO-System)

The Jewelry Wall Organizer (JWO-System) is an adaptable solution that can be used to organize and display jewelry or other lightweight items, or serve as wall art. The JWO-System is built from 3D printed vertical and horizontal rods that…

Downloads
73
Likes
56
Rating
0
P
PrintablesHardHat

JWST RGB Wall Art

Just a school project. Put rgb strips on the back middle circle.

Downloads
65
Likes
33
Rating
0
P
PrintablesLexFran

JWST Artistic Wine Glass Holder UPDATED

Kindly "LIKE" if you download James Webb Space Telescope inspired wine glass holder. Very Sturdy, print with 5 walls. Approximate bounding box: 20x20cm Weight 45-50 grams Also find other JWST artistic models & items: 1:50 scale 1:25 scale…

Downloads
65
Likes
18
Rating
0
P
PrintablesUntangleWORKS

WE TECH G series, KJW KP13 KP17, AW VX: DMB styled baseplate

(08-09-2024) APS ACP base plate added GHK g 1 7 base plate added -- this baseplate is modeled to look like a DMB base plate. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Danny meatball G mag” just like with…

Downloads
64
Likes
10
Rating
4.67
P
Printableskiwii

AA/EMG x TTI JW4 Pit Viper Stand (Angled)

Stand for the TTI Army Armament JW4 Pit Viper (should fit EMG version too according to CGaddict). I wanted my Pit viper to be displayed in a different way to the original model, so this is my take on it :) Printer : Artillery Sidewinder…

Downloads
62
Likes
10
Rating
0
P
PrintablesMücke

VFC - MP7 & KJW - KC02 - Airsoft Empty Chamber / Safety Flag - Free Download

***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…

Downloads
61
Likes
11
Rating
5
P
PrintablesDropoff510

Jw literature holder

Hi this is a compact holder for magazines, contact cards, meeting invites, and tracts. there are 2 versions of the back side one for holding tracts and the other for no tracts. Assembly hardware, 1m3x10mm cap screw. Printing. Ive been…

Downloads
61
Likes
16
Rating
0
P
PrintablesMERoy

JWST Desktop Display for Prusa

This remix is based on VegaWoodWorks's LED James Webb Galaxy Desktop Display , which is beautifull but too big to be printed on a Prusa printer. This remix contains STL files made to fit on a i3MK3S+ bed. The biggest part is 19.5 cm x…

Downloads
60
Likes
21
Rating
0
P
PrintablesMücke

KJW - KC02 / SSQ22 GBB Airsoft Speedloader Adapter with BB Kicker - Free Download

Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…

Downloads
59
Likes
7
Rating
0
P
Printablesmaxcross

Duraco JW-82 Watering Can Nozzle ( 3 versions)

A simple watering can nozzle, the original that was too brittle due to years of service. EDIT: Different sizes will be created upon request, to fit your specific watering can. Printed in PLA, it can be printed in PTEG for increased heat…

Downloads
58
Likes
9
Rating
0
P
PrintablesERAN.PC

JW NEW 9 TRACTS

If you want the 3D model as an object, write to me and I will send it to you. The base needs a can measuring 8x22x7. I created three small recesses in the bottom for those who want to put silicone rubber bands. Just an idea, if you print…

Downloads
55
Likes
8
Rating
5
P

JW Philipp Tipptopp im Dienst / JW Caleb Be Good in the Ministry

Philipp Tipptopp im Dienst / Caleb Be Good in the Ministry

Downloads
52
Likes
5
Rating
0
P
PrintablesJohn Evans

JW Bible Tetragrammaton Keychain 2025

Keychain with a hanging bible, inscribed on the exterior side with the JW and on the interior with the Tetragrammaton. Created in Blender.

Downloads
51
Likes
10
Rating
0
P

JW David vs Goliath

Read 1. Samuel 17:1-54

Downloads
48
Likes
8
Rating
0
P
PrintablesDizzy

James Webb Space Telescope (JWST) - Keychain (REMIX)

This is very simple remix of original JWST keychain made by TheIgorMC. Big thanks to him! Changelog Added holes to mirror holder pillars Added handle on the mirror bottom Suggestions I have used default “0.1 mm DETAIL” print settings I…

Downloads
48
Likes
11
Rating
5
P
PrintablesAstroPrinter

JWST 3d Coin

This a a printable coin I created for the James ebb Space Telescope. It is free to print but you are not permitted to sell it.

Downloads
48
Likes
11
Rating
5
P
PrintablesLazyMaker

JWST mirror cookie cutter

A cookie cutter in the shape of the JWST primary mirror.

Downloads
48
Likes
16
Rating
0
P
PrintablesRiccardo

Kjworks Ruger MK1 outer barrel

just an outer barrel "cover" Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Category: 3D Printing

Downloads
47
Likes
3
Rating
0
P
PrintablesMajsterkoV

KJW AND RAVEN GLOCK 17 HAMMER

KJW AND RAVEN GLOCK 17 HAMMER designed for raven glock 17 but fits kjw and any other simillar

Downloads
46
Likes
4
Rating
0
P
PrintablesRiccardo

Picatinny Rail for kjworks ruger mk1

this is a rail for the kjworks ruger Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Category: 3D Printing

Downloads
42
Likes
3
Rating
0
P
PrintablesLexFran

JWST 1:50 Artistic Model

Kindly "LIKE" if you download Donations welcome at MetaMask: 0x60336dD01af8f8542Ab7F263b02F87302c83b5f2 James Webb Space Telescope JWST, a 1:25 scale artistic model Parabolic design 2 parts to print Printable on small beds **The grille…

Downloads
41
Likes
8
Rating
0
P
PrintablesLexFran

JWST Coaster

JWST inspired drink coaster ±40 grams of filamants Filament only (no acrylic) design, please use both COASTER_Hegaxons.stl and COASTER_filament_only_no_acrylic.stl for the tiles and the base respectively Best made with laser cut clear…

Downloads
39
Likes
7
Rating
0
P
PrintablesTuXaMaT

Xiaomi Mijia 3 mini (MJWSD06MMC) temperature sensor wall mount

Wall holder for new 2025 Xiaomi Mijia 3 mini BLE MJWSD06MMC temperature and humidity sensor

Downloads
38
Likes
4
Rating
0
P
PrintablesJaykoyote

JWST Wall Art for Hanging

A model of the JWST telescope mirrors, curved to match the scaled focal point of the real telescope. for this model you will need: Non Printed: Approx 40 x 16mm M3 bolts An equal number of nuts (I used hex). 19 x gold acrylic mirrors…

Downloads
38
Likes
17
Rating
5

JWST Cookie stamp

I know you always wanted to eat those crispy little mirrors, guess now you can! Just a fi=50 cookie stamp with JWST mirrors B) Tech Stats: -fi = 50 mm -depth of mirror pieces = 2 mm -Handy hole for inserting toothpick as a handle…

Downloads
38
Likes
18
Rating
0
P
PrintablesCaptainMarc

KJW Mk1 Handguard (Compatible with Esteran KJW Mk1 Carbine Stock)

These are remixes from https://www.thingiverse.com/thing:4883607 By Esteran I really like The carbine stock from Esteran but I want something more classic WW era looking and maybe more variations to the designs will be great. There are…

Downloads
38
Likes
5
Rating
0
P
PrintablesLuka Gra

Ultimate JWST coaster

This model is remix. It's 4mm high (+1mm) to allow more filament layers. Print with 3 filaments, no bottom layers. First layers are TPU, then black, then silk gold and finally TPU again. Made like this to prevent slipping and it works!

Downloads
35
Likes
19
Rating
5
P
Printableskdub

Parametric JWST Mirror Coaster

Fusion360 model included so you can change the params if desired.

Downloads
33
Likes
4
Rating
5
P
PrintablesLexFran

JWST Original Shape Coaster 1:64 scale

Kindly "LIKE" if you download Approximate weight: 25g Size: 101 x 93.5 x 4mm Also find other JWST artistic models & items: 1:50 scale 1:25 scale 1:16 scale 1:10 scale In progress Wine glass holder JWST Wine Glass Holder Coasters JWST…

Downloads
32
Likes
8
Rating
5
P
PrintablesCrazyCzech

James Webb Space Telescope (JWST) pencil / marker stand

James Webb Space Telescope (JWST) pencil / marker stand Redesigned, re-dimensioned I didn't make it but can't find the source, thangs.com maybe

Downloads
31
Likes
5
Rating
5
P
PrintablesAli E

Mirror Decoration (JWST)

I liked the other JWST mirror decorations I've seen lately, I sourced 100x100 hexagon “wall decor” gold acrylic mirrors and figured out a frame that would fit on my build plate. You will need 18x 100x100mm hexagon mirrors and 6x of this…

Downloads
30
Likes
7
Rating
5
P
PrintablesOxmstr

JWST James Web Space Telescope wall art mirror

As always with my designs this is not the best of them. This is time and filament optimised, meaning it's floppy and not that easy to assemble and should be done in openSCAD. BOM 18 × 150 mm diameter circumscribed (edge to edge) PMMA…

Downloads
30
Likes
11
Rating
5
P
PrintablesDon Joe

Bandsaw Table Insert Plate 70mm (Solid) (fits JET JWBS-14SFX)

Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…

Downloads
29
Likes
4
Rating
5
P
PrintablesDon Joe

Bandsaw Table Insert Plate 70mm (Vented - Holes) (fits JET JWBS-14SFX)

Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…

Downloads
29
Likes
2
Rating
0
P
Printables2_ZENN

JWST Realistic Wall Art (with hole for hanging)

I inspired myself from this design : https://www.thingiverse.com/thing:5223379 Not a remix tho as I went from scratch. I wanted something a bit more realistical, as the real stuff is already quite symetrical. Use the test_mirors_jwst to…

Downloads
29
Likes
10
Rating
0
P
PrintablesJacob

JW Literature Cart Wind Clip

For best results, print solid or with 5 perimeters with ASA. It works good in PETG as well, but ASA has a higher modulus and fares better in the frequent outdoor sunlight due to its good UV resistance. (if it is not constantly in…

Downloads
28
Likes
7
Rating
0
P
PrintablesZachryWD

Button, James Webb Space Telescope - JWST

Simple and quick print, I find 0.1mm gives the best result. Sew it to anything! Shirts, Backpacks, Hats, Jackets, Jeans, Anything!

Downloads
26
Likes
6
Rating
0
P
PrintablesAcesEighty8

KJW Cybergun Taurus PT99 Switch Bar

This is one of the things that always gets lost in the pistol, so i designed this since it's hard to get spare parts. Print Settings Rafts: No Supports: No Resolution: 0,12 Infill: 100 Category: Other

Downloads
26
Likes
5
Rating
0
P
PrintablesDon Joe

Bandsaw Table Insert Plate 70mm (Vented - Round Slots) (fits JET JWBS-14SFX)

Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…

Downloads
25
Likes
4
Rating
0
P

JWST Small Artistic Model

I liked the large hanging wall design, but wanted something smaller, which can be printed in one time on my MK3S. So I designed this model around those mirrors : https://fr.aliexpress.com/item/33038861135.html (S size). It requires 18 of…

Downloads
24
Likes
10
Rating
0
P
PrintablesLexFran

JWST 1:16 Artistic Model

Kindly "LIKE" if you download Donations welcome at MetaMask: 0x60336dD01af8f8542Ab7F263b02F87302c83b5f2 Artistic Sculpture/Model at 1:16 scale of the JWST (James Webb Space Telescope) Printable on beds as small as 14x14cm 1 base,…

Downloads
24
Likes
9
Rating
0
P
Printablesmcko

JWST mirror for 100x115 hexagons

Use glue instead of pins :)

Downloads
23
Likes
2
Rating
0
P

Biblical Samson Simson JW Comic Version

Samson Simson JW Comic Version. If you think that's too much, look up the JW illustrated Bible story about Samson ;-)

Downloads
23
Likes
0
Rating
0
P
PrintablesJB3Designs

Remix of JWST hanging wall model

This is a remix of JWST hanging wall model by floribot. The original had a wood backer board. The idea is to print the segments thicker so they can be fully 3D printed. This remix creates some slots in the bottom of the segments with some…

Downloads
23
Likes
11
Rating
0
P
PrintablesRubén García

ZJWRC 140mm antena mount

ZJWRC 140mm antena mount, impreso en TPU. Elementos utilizados: Pigtail SMA: https://www.banggood.com/Turbowing-MMCX-to-SMA-or-RP-SMA-Female-Flange-FPV-Antenna-Extension-Cord-p-1185767.html?cur_warehouse=CN&ID=511528 Tornillería: 2x M2*8…

Downloads
23
Likes
1
Rating
0
P
PrintablesDon Joe

Bandsaw Table Insert Plate 70mm (Vented - Slots) (fits JET JWBS-14SFX)

Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…

Downloads
22
Likes
4
Rating
0
P
PrintablesPheeniksu

JWST Diffraction Stars (James Webb Space Telescope) – Anti-Stringing Edition (MK4 & Ultraglow)

Bring the iconic look of the James Webb Space Telescope (JWST) to your home! This set of stars, featuring the signature diffraction spikes, is specifically engineered for a fast, clean, and frustration-free printing experience. I went…

Downloads
22
Likes
6
Rating
5
P
PrintablesFREDCHRYS

JW15 '' screen stand

super cool Category: Accessories

Downloads
22
Likes
4
Rating
0
P
PrintablesCherryOT

5 layer sunshield for foldable JWST

The foldable JWST model is awesome, but the single layer mylar/foil sunshield just didn't do it for me so I created a 3D printable 5 layer sunshield. Just barely fits on my Prusa XL which has a 36x36cm bedsheet so you'll need a similar…

Downloads
21
Likes
5
Rating
0
P
PrintablesMücke

TM/KJW - M1911 & M45 GBB Airsoft Speedloader Adapter with BB Kicker - Free Download

Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…

Downloads
21
Likes
4
Rating
0
P
PrintablesLexFran

JWST 1:25 Artistic Model (Mixed Media)

Kindly "LIKE" if you download A 1:25 scale artistic rendition of James Webb Space Telescope. Also find other JWST artistic models & items: 1:50 scale 1:16 scale 1:10 scale In progress Wine glass holder JWST Wine Glass Holder Coasters JWST…

Downloads
20
Likes
4
Rating
5
P
Printablesalex-wi

JW Cart Trolley Trakt holder Traktathalter

Für die neunen Traktate erstellt. Du brauchst ein 1mm Acrylglas oder ähnliches. Ich habe einen günstigen Bilderrahren gekauft und das Acrylglas mit einem Cuttermesser ausgeschnitten. ca 67g Material, 2-3 Stunden Druckzeit 3 Wandschleifen…

Downloads
19
Likes
5
Rating
5
P
Printablesbotbot141

JWST Clock - 2.5in, fastned (Remix)

Similar to the original, the idea is to make a JWST shaped clock with reflective gold acrylic mirrors. Prints: 1 X JWST_Clock_Center 9 X JWST_Hex_2.5in Assembly notes: There is no need to put a screw in every hole, just use as many as you…

Downloads
18
Likes
3
Rating
0
P
PrintablesCheebus

JWM22 Cover

If you have a Jensen JWM22 RV Stereo and you're like me you'll find that having a second sun in your camper is too damn bright. I would use black filament, you can see in the picture that there is still a little light bleed through, ill…

Downloads
17
Likes
0
Rating
0
P
PrintablesGavin

Lego MOC James Webb Space Telescope (JWST) Wall Mount 487 piece model.

This is a wall mount of for a AliExpress sourced lego compatable kit of the James Webb Space telescope (JWST). The kit as sold is 487 pieces of compatable lego bricks and looks to be a kit of the…

Downloads
16
Likes
3
Rating
0
P
PrintablesDugi

JWST launch badge

This medal will forever remind you of a historic moment. On December 25, 2021, the Ariane 5 rocket launched with the James Webb Space Telescope - the flagship of astronomy this decade. No support needed, you can make the the object…

Downloads
15
Likes
2
Rating
0
P
PrintablesMücke

KJW - AR15 / M4 GBB Airsoft Speedloader Adapter with BB Kicker - Free Download

Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…

Downloads
15
Likes
2
Rating
0

JWST Hexagon Mirror Alternative

Hexagonal plate. As I was printing the JWST Table Mirror https://www.printables.com/model/168910-jwst-table-mirror I discovered the IKEA (HÖNEFOSS) hexagonal mirrors were not available. There is just enough clearance between the plate and…

Downloads
15
Likes
5
Rating
0
P
PrintablesBen
Downloads
15
Likes
1
Rating
0
P
PrintablesAdrian Menzel

WD12X10327 GE Nautilus Dishwasher caster for GSD3200JWW/GSD3200J00WW

You will need to use supports on the round part of the model. I recommend to print it laying on it's side for best stability during and after printing. The part that holds the casters in place for the upper rack in the GSD3200JWW…

Downloads
14
Likes
1
Rating
0
P
Printablessescobar

Joyo JW-06 Wireless Transmitter Guitar Strap Clip

I made this to move my wireless transmitter away from my active pickups in the hopes that it would help with interference. You'll need a 1/4 inch TS cable extension (One end male 1/4 jack and one end female 1/4 inch jack). The model is in…

Downloads
14
Likes
0
Rating
0
P
PrintablesCherryOT

Curved JWST Mirror

Wall mountable curved JWST mirror designed for use with 110mm gold hexagonal mirrors commonly available on sites like Amazon. Careful peeling off the backing to reveal the adhesive, the mirrors I got use a thin foil for the gold…

Downloads
14
Likes
6
Rating
0
P
PrintablesFlexlug

KJW M9 Beretta airsoft spring retainer

Spring retainer for M9 Beretta magazine

Downloads
14
Likes
3
Rating
0