139 models
Even though the Kopp Powerversal power distribution are completely made of plastic (don't get fooled by the aluminum look), they are made extremely well from the electrical standpoint. Additionally, the power sockets have the right angle.…
Print approx. €2.88–€3.51 excl. taxPreliminary estimate for one variant
I've simply print it with the default PLA 0.2 profile for the MK3S on Prusa Slicer. Support needed. The screw hole diameter are 8mm.
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Used provided parametric Fusion360 file and created brackets for Ikea's Koppla power strip.
Print recommendations no support needed print with the smallest side on the bottom for optimal results position the model with the long side in the same direction as the printers base plate is moving while printing Will match to IKEA…
A remix of a Koppla mount for the Ikea Skadis pegboard system. The Koppla power plug extension is slightly raised and angled for the use with the Skadis desk mounting kit. You can find the related M2 T-Nut-System files and more…
This is a followup to: Lack Attack#2: LACK Attack #2: Casterate the Lack: https://www.prusaprinters.org/prints/15918-lack-attack-2-casterate-the-lack-aka-roll-the-lack without further adieu.... Attack 3: KOOPLA THE LACK Next thing was to…
Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.
Needs some support for the hooks.
Bracket for screw-mounting IKEA Koppla power strips. Source files created with FreeCAD 0.14. Print instructions Unassociated tags: power socket, power strip, power strip mount, universal mount Category: Organization Summary Bracket for…
At work we are using Ikea Mittzon desks. These desks are designed to use the Ikea own power outlet series “Koppla”. At some of the desks we dont have these outlets. Instead of having blank openings, i designed a tight fit cover panel to…
I have the CH Version of the powerstrip. See dimensions below
Please note that this model is a remix from this design from crashdebug on Thinigverse. As I didn't like the wide setup of the original file I decided to rearrange the position of the holes. Happy printing! Notes: Used "support from built…
This clamp is designed to secure an IKEA KOPPLA extension cord to a table, ensuring easy access to the slots while taking up minimal space. The clamp fits tabletops ranging from 10 up to 29 mm in thickness (without pads). Some adhesive…
Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…
Printed with PETG, adjusted in Tinker Cad. Fits. Can be slightly tighter if you wish. Drop a like or two if you find it useful. Its nice to see these things grow over time.
Replacement connector for Renault Laguna 3 Xenon light sensor. This part was broken on my car and I decided to replace it. After replacing the part you need to get the light adjusted. I printed the part in resin and it works flawlessly…
This is a remix of Gregor1991s model to provide a frame for the Koppla Powerboard when not using the complete Mittzon desk frame. As the support for the powerboard is built into the desk frame and not the add-on module, if you use the…
I created this bracket, so I can store the Ikea koppla to a wall. Like it? Buy me a coffee: https://buymeacoffee.com/erwinha
Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all. I used Esun PLA+ as it was already loaded and it…
Version für CH
Da ich keinen passenden Adapter gefunden habe, der es möglich macht, Taschen mit dem Lochkoppel-System (der Bundeswehr) an einem Molle-System zu befestigen, habe ich diesen selber konstruiert. Beste Druckausrichtung: Locher müssen ggf.…
It's a smaller and faster print than the original. I just performed a cut through one of the mounts
Kopp Paris Frame Rahmen Power Steckdose Schalter 1/2/3 Frame Powersupply or switch 1/2/3 it works great - PLA - Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message.…
As Ikea is not selling the mounting frame separately, I designed this frame to have a tight fit for the koppla power outlet. depending on the printer tolerances you have to scale to 99% printed with PETG, 0,4mm nozzle
Die Wandhalterung dient zum senkrechten Befestigen der Vierfachsteckdose an einer Wand oder einer anderen ebenen Fläche.
This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse…
This will hold your Ikea Koppla 3-way socket under your desk or on a wall.
Printed from PLA, two 4mm screws for mounting to the desk / cabinet Print instructions: 0.2 layer 0.6 nozzle 5 perimeters or 100% infil from 3mm height to the top supports (idealy breakaway with 0 top clearance, top interface pattern…
Printed in PETG and fits fine, looks durable. This is a remix of https://www.thingiverse.com/thing:4942631
Da ich keinen passenden Adapter gefunden habe, der es möglich macht, Taschen mit dem Molle-System an einem Lochkoppel-System (der Bundeswehr) zu befestigen, habe ich diesen selber konstruiert.
This is a simple mounting mesh I made for the 110x180x70 Biltema Kopplingsdosa/ Junction Box. Edit: Added more!
This is an adapter for KTS 95 (Koppeltragesystem 95) also known as "Lochkoppel" or Bundeswehr Beltkit attachment system, to be able tu attach it to Molle panels. This adapter consist on a U shaped piece with 4 holes, it meant to emulate…
Hey! I recently got a standing desk from IKEA and the KOPPLA extension cord that is supposed to slot into the cutout in the desk was and is sadly out of stock. I got annoyed by having an empty space in my desk being unused, so instead I…
I would like to participate in the Clamp-On Items contest. You can adjust bolt and press using OpenSCAD file. Print with 100% infill. Print cap tip with flex filament.
Holder for Koppla french version (n° 204.120.24) with 2 versions (holes inside and outside)
This is a simple mount for IKEA KOPPLA or similar shaped multiple plugs. I printed it with 100% infill in Esun PLA+. I recommend hybrid tree support. For the screws I used wood screws 3.5x20 from SPAX but the screw covers shoud fit to any…
Simple stand to hold the roses in place in the vase. They looked ok w/o it, but like a real vase they tended to lean over towards the outside like roses in a real vase. I am include an scad file if you want to fuss with it or size it for…
This is an enclosure for common optocoupler relays including a snap fit lid
"Quick and dirty" 3D-Model for desk-planing. Here is the 4-EU-plug version incl. 2-USB 5V slots 13W (total). Category: Household
Wife wanted me to use the 3D printer to fix the problem with the power strip sliding around so I modified two awesome models to solve the problem since I couldn't find a tidy solution. My modeling skills suck so if anyone can clean up the…
The power cable for my OctoPi was too short for the power strip laying on the floor, so I needed to mount the power strip below the base plate. Constructed this clamp for the Ikea Koppla power strip so that the mounting screws were going…
Slides onto bottom rail of the socket. Tested with UK version, fits EU too.
I wanted a 45 degree holder for my Ikea Koppla powerswitch. As i couldn't find one i remixed an existing holder (thanks @volly !) with a block to glue on top of your desk or an altenative for screwing into you desk from behind. Screw in…
Inspired by this https://www.thingiverse.com/thing:4071960 by meckermac, I have made a similar model for SKADIS mounting. Print Settings Printer brand: Creality Printer: Ender 3 Resolution: 0.28 Infill: 40 Notes: The SKADIS charger hook…
Introducing my personalized IKEA KOPPLA Power Strip Holder – a game-changer for cable chaos in Swiss and Liechtenstein homes! This one's got a twist – I designed it to be 3D printable, attachable with small screws, and it's a breeze to…
Clip in Cover for Cover Frame - Switch Range / Series "Europa" from KOPP (width 51mm / corner radius ~3mm) Category: Household
I wanted a 45 degree holder for my Ikea Koppla powerswitch. As i couldn't find one i remixed an existing holder (thanks @volly !) with a block to screw in from behind your desk or an altenative for glueing onto your desk. You can cut the…
Printed with .20mm SPEED profile on my Prusa Mini from Sun PETG
Ikea koppla power strip bracket for Lack table leg. (will also fit other 50mm2 table legs). Easy to print, no support. Remixed from: https://www.thingiverse.com/thing:1376701
Each mounting bracket has a 3.5mm hole for screw, two pins matching extension cord casing holes, and holding flaps. Two brackets per extension cord is required. The whole bracket bends to accept the extension cord. I've printed it from…
Mounting bracket for the IKEA KOPPLA 6 outlet power strip sold in the North American market. Print two units, and install using four #8 screws (as designed), or another screw if you modify the hole yourself. I've printed this in Bambu Lab…
I designed this custom bracket to mount the Ikea KOPPLA 6-outlet power strip (model E1654-EU6WSW) when the surface wasn’t wide enough for a typical end-mount design. This model features screw holes positioned one outlet in from the ends.…
3-Räderkoppelgetriebe mit momentaner Rast Update: 7.5 instead 10mm per layer, better modularized, easier to assemble,, a more stable design. The design now allows for explosion to make export to the slic3r easy. The parameter is…
Another version of a Koppla mount for Skadis. I needed a flat bottom and holes for M2.5 Socket head screws. Designed for use with the Skadis T-Nuts Mounting System for Ikea Skadis Pegboards with M2.5 screws (Perfect: M2.5x12 SHCS).
I remixed crashdebug 's ' IKEA Koppla power strip mounting brackets ' in order to attach my power strip to my closet without screws. Print Settings Supports: No How I Designed This Remixed using Tinkercad .
The cover will be fixed by a M3 screw. Everything can be printed without supports. The theaded insets I found can be found here:…
Krauss XIVe class style loco for the TU-Koppel A chassis. The boiler is hollow so you can fill it with liquid gravity to increase the pulling power of the little thing. still a work in progress and I'm probably going to make a few more…
This is a remix of SoundDoc's LACK Attack #3: Koppla the Lack. Beside changing the dimensions for fitting the EU version of Koppla, I've also made a ‘small’ version for those who need a smaller version of the surface mount. Added some…
I needed to cover the switch of my Koppla 4-way socket which is right next to the op of my bed... I desingned 2 Verions of the molly guard, for the first you need some support for the hinge (I used a metal paper clip and glue to close the…
Windsensor Koppler Shelly Plus Uni für Home Deluxe Markise oder andere Funkmarkisen, Mit Aliexpress 0-10V Windsensor Wind sensor coupler Shelly Plus Uni for home Deluxe awning or other wireless awnings, with Aliexpress 0-10V wind sensor…
Kopp Europa 3-fach Abdeckrahmen – Ersatzteil (Arktis-Weiß) Das Problem Der originale Kopp Europa 3-fach Abdeckrahmen ist gebrochen oder gerissen? Im Handel wird er oft nur schwer als Einzelteil angeboten. Die Lösung Dieser 3D-gedruckte…
Print laying on the side without support structures. That way the part is the strongest I printed it with 5 Walls and 6 top and bottom layers; 20% infill. To attach it I used 4.5x16 mm Wood screws. You can also use longer ones depending…
This support have the exact dimensions for the 6 plugs Koppla Power Strip from IKEA and the LINNMON table, also from IKE
Die Lenkerverkleidung an meinem Star hat sich immer wieder losgerüttelt und dann geklappert. Also habe ich mal schnell an Freecad gesetzt, und diese Entkoppelung konstruiert. Das funktioniert sehr gut. Nix klappert mehr und nix löst sich.…
Dies ist eine Blindabdeckung anstelle der Schaltwippe... @zB für Philips Hue Er wird einfach in den Rahmen geklebt z.b.mit doppelseitigen Klebeband…
A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.
Modifications : Cable tile fixation Cable hole enlarged to 3 cm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Eryone PETG white
This foot slides over the existing feet of the IKEA Koppang cabinet to allow the cabinet to be used as a small baby changing station. With our new baby on the way we needed to remodel a small home office into a baby room. The room was too…
Just another holder for IKEA Koppla multiplug (USB version). It is a modified version from Olo Deepdelver's holder, changing the screw brackets to be inline with the multiplug to fit tighter spaces, fix on IKEA 4cm furniture legs, etc.…
Here is a clamp to mount the IKEA KOPPLA flush on a IKEA MOSSLANDA. All you need are two M5 screws, two washers and two M5 nuts to secure the koppla to the clamp. I used a jigsaw to cut the shape of the koppla into the mosslanda shelf,…
A replacement handle for IKEA KOPPANG – should also fit HEMNES. In 2025, redid my 2024 model, simplified the design, and added the FreeCAD file. If you like this design, please consider leaving a ♥heart. Thanks! ---------- - Top Fill…
An adapter to loosly hold the power strip to the bottom a table. 3.80 mm ⌀ hole for a screw. WORK IN PROGRESS Just slide the holder onto the strip and bolt it to the table. Please use at least 2.
Experimental Koppelgetriebe. OpenSCAD file supports animation Video at: https://youtu.be/UEW-ie00bvk Category: Engineering
This is a simple wall mount for IKEA Koppla socket strips in two variants for horizontal and vertical alignment of the sockets. STEP, FreeCAD and STL attached, so you can modify it for your own needs. If you like my design, please post a…
added a cutout to allow better reeling up of the cable
Beschreibung: Diese Fensterheberkopplung wurde speziell für den Smart Fortwo 450 (Baujahre 1998–2007) entwickelt. Sie dient als Ersatzteil oder Upgrade, um die Mechanik des elektrischen Fensterhebers wieder funktionsfähig zu machen. Das…
Für das fantastische Cable Managment-System “Underware / Underware 2.0” von @HandsOnKatie_827995 habe ich hier mit dem Generator einen Item-Holder für die Steckdosenleiste von IKEA “ KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß,…
HSW and Multiboard holder for Koppla french version (n° 204.120.24). For the different versions, you need : multiboard : 4 x M3x8mm Hex Socket Cap Screw + 4 x Drop-In Nut Snap - M3 HSW : 4 x M3x8mm Hex Socket Cap Screw + 4 x HSW insert…
It fits this model - tested on EU . Prints without support. printed at 0.24mm, 2 walls (if smaller, simply make 3 walls, no infill). You place the mount wire side first, then place the KOPPLA in it, place the left or right mount on the…
0.2 mm layer height, printed on PETG with supports
A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side. Designed for printing without…
Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one. https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original…
Just for fun I love that italian sketches. For now just the one. There will be more ........ (single) see the double one --> thing:5202832 Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.-…
Deutsch unten The Kopp UNOversal® Plus 6-way power strip is one of the best-selling power strips on Amazon. I designed simple mounting brackets for it. https://www.amazon.de/dp/B07B66G3CS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1…
printed on the mk4 without a problem, pictures are from a prototype, since then i added thickness to the bottom part and filleted the holes
Just another stand for Ikea Skadis perf board, with the Ikea Koppla extension cord in it. Fits Skadis board width 36cm. You can use the original bolts which cam with Scadis bord to attach the stand. The thread will cut into the plastic…
WARNING THIS THING HAS NOT BEEN TEST PRINTED! Genevieve & co.'s first class of tender locomotive, known as the "River Class" they started out with works no. 12 Draig yr Afon Droellog Welsh for, The Meandering River's Dragon built in 1903…
Combination of two modesl to fit power strip under your Ikea FJÄLLBO
Inspired by the Tipong Colliery Railway's 0-4-0 Bagnall named David (although squished down to fit a TU-Koppel), that is going to return to service this year! To assemble snip the front hook thing off the chassis and glue on the front…
Hello, Sharing an easy and quick to print wall mount for Ikea KOPPLA socket. Dimensions: 59 x 47 x 70mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
Beschreibung: Diese Fensterheberkopplung wurde speziell für den Smart Fortwo 450 (Baujahre 1998–2007) entwickelt. Sie dient als Ersatzteil oder Upgrade, um die Mechanik des elektrischen Fensterhebers wieder funktionsfähig zu machen. Das…
This is an electronics case designed to fit over the IKEA Koppla single-port USB charger. That variant of the Koppla charger has since been replaced by the Småhagel charger…
konstruiert mit OpenSCAD für Kopp Schalter Modellreihe ‘Paris’.
"Pride of Bryn Bach" (who was known by everyone as Lynn) Worked on the Bryn Bach Light Railway as their number one until the line flooded in 1902. The line had been built along the water level of the river Bryn, it turns out that large…
A quick 'n dirty mount for an Ikea UK plug Koppla 4-way power adapter. I wanted it mounted on my desk, at a 45 degree angle, and couldn't find any on Thingiverse, so I quickly made this. I'm still printing my first one - so it's untested.…
Gemaakt om een vlaggenmastje op de camper te kunnen plaatsen. De koppeling past op een Go Pro aansluiting. Het mastje is 8 mm dik.
This tray was always quite awkward. Everything slid around in there, not really knowing its place. Since I don't like wasting things, this is not a replacement to the included tray, instead it docks inside and snugly snaps in with little…
Geprintet mit Elegoo Neptune 4 Pro. Deeple Pla Pro Filament 0.1 Schichthöhe KEINE Glättung!! (Zeitverschwendung) Passend für Kopp Modell: ATHENIS Zeiten und gramm: 1-Fach: 15minuten 7gramm 2 Fach: 20Minuten 11gramm
reuploaded from my thingiverse account that I am now leaving behind as I migrate onto Printables
![[IKEA] FJÄLLBO / Koppla power strip brackets](https://media.printables.com/media/prints/481fe52a-08f6-4140-8188-cbbbe1fe10ef/images/11507866_a47ecee1-659b-4bf1-adbe-d84c3827a2ff_d9109f15-f29c-4f86-a5a9-d335dc439c08/img_0604.jpg)
