Search results: lawnmower

Sort order

166 models

P

Lawnmower Blade Balancer

3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…

Downloads
1,224
Likes
96
Rating
4.5
P
Printablesmicael456

2-Part Robot Lawnmower Wheel & Tyre | Mculloch R600 / Husqvarna / Gardena

A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…

Downloads
25
Likes
1
Rating
0
P
PrintablesTreyvn

Lawnmower pull start handle

a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…

Downloads
943
Likes
55
Rating
5
P
PrintablesChristoph

Replacement Wheel for Gardena R40Li robotic lawnmower

The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…

Downloads
779
Likes
61
Rating
5
P
PrintablesM D

Lawnmower Drive Handle Spare (MacAllister MLMP1600)

The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…

Downloads
705
Likes
21
Rating
5
P
PrintablesSylex3D

Riding Lawnmower

A model to honor the many hours spent upon the seat of a mower… Because who doesn't want a model of a lawnmower sitting on their desk? Like, download, and comment if you want to see more models like this! (And, perhaps, if you are feeling…

Downloads
343
Likes
45
Rating
0
P
PrintablesEngineer

Lawnmower fuel Cap

Lawnmower fuel Cap

Downloads
318
Likes
12
Rating
5
P
Printablespittance

Bosch Rotak 32R Lawnmower Pulley/Fan - Version 2.3

My Bosch lawnmower stalled and melted its drive pulley - I designed and printed a replacement Update 21June 2016 It finally died - the mower ate a chunk of wood which jammed it and caused grievous harm to the pulley and tension bearing…

Downloads
231
Likes
6
Rating
0
P
PrintablesReckit

Fuel Cap - Mountfield Petrol Lawnmower

Fuel Cap for Mountfield SP180. Fits perfectly, not sure which other models it fits Print instructions Print top side down Requires supports for the underside, not internally. Use custom supports as auto support will generate supports for…

Downloads
224
Likes
10
Rating
0
P
PrintablesQuickset45

Replacement pull start handle for chainsaw, lawnmower, leaf blower etc.

This is very close to the original ICS 695 concrete chainsaw handle. I printed with 100% infill.

Downloads
221
Likes
182
Rating
5
P
PrintablesTheWortLord

Zero Turn Lawnmower Keychain

Needed a keychain for my zero turn mower. Enter this simple two color print to get the job done. 4/11/2025 - I've added two new models that increase the height of the mover design.

Downloads
202
Likes
16
Rating
0
P
Printableswerner_rh

Worx Landroid Mähroboter Garage / Robotic lawnmower garage cheap and easy

Selbstbau einer Mähroboter Garage (Carport) für weniger als 20€ Materialkosten. Die Garage ist für den WORX Landroid WR165E und ähnliche Modelle zugeschnitten. Eine Anpassung für Roboter Modelle anderer Hersteller ist leicht möglich. Für…

Downloads
185
Likes
23
Rating
0
P
PrintablesRudeus

Manscaped Lawnmower 2.0 Guard

Works better than you would think. Print first layer super slow, maybe add a bit of a glue stick swipe across. DO NOT PRINT WITH BRIM. The brim will interfere with the teeth, it will be impossible to remove the brim. I've included a photo…

Downloads
181
Likes
13
Rating
4
P
Printableshegelklimbo

Lawnmower Blade Balancer Universal Size

I wanted to have a blade balancer which fits a wide range of center hole diameters so that I can balance the blades of all different lawn mowers I have. In my opinion the balancing units one can buy are way too expensive so I came up with…

Downloads
173
Likes
30
Rating
5
P

Ryobi lawnmower battery holder

This is a holder for a 6Ah Ryobi battery for an electric lawnmower. It's designed to charged while hanging on the wall and for it's charger to be hung from the side when not in use. If you need to change the mounting hole size the…

Downloads
165
Likes
38
Rating
5
P
Printablesmichelluccote

Small Lawnmower Wall Mount for 6 inch wheels

This is a simple wall mount that I used to put up a plug in lawnmower onto my garage wall. The lawnmower has 6 inch wheels and this is for the 13 inch Ryobi lawnmower. The mount has many opening to make it strong enough to support the…

Downloads
155
Likes
16
Rating
0
P
PrintablesJim

Qualcast Panther Lawnmower Pinions (Yellow and Blue)

I've owned a Qualcast Panther 380 push lawnmower for many years. It's unbreakable, solid, and does an excellent cut. If you own one, you might already know that there are two small pinion gears inside the wheels that need replacing every…

Downloads
143
Likes
6
Rating
0
P
PrintablesSammyP

Replacement 8" Lawnmower Wheel

This is a replacement wheel for a lawnmower. 8" wheel 1/4" axle

Downloads
140
Likes
15
Rating
5
P
Printablesnushipwright

Security key for Parkside PRMA 40-Li A3 lawnmower

Security key for the Lidl Parkside battery powered lawnmower PRMA 40-Li A3. Print flat, no supports needed.

Downloads
130
Likes
9
Rating
5
P
PrintablesAlteRob

30deg Angle Gauge for Lawnmower Blade Sharpening

Most lawnmowers, and a lot of other garden equipment, work best when the blades are sharpened to a 30-degree angle. With this gauge, you no longer have to estimate--just grind or file the blade's edge until tip just reaches the center of…

Downloads
121
Likes
23
Rating
5
P
PrintablesThe Olly Bee

Milwaukee Lawnmower cup holder

Hello Guys I have I created this gyro cup holder for the Milwaukee lawnmower 2823-20. Yes you can put a beer in there if you would like, but for me I typically have a spray bottle with weed killer and anytime I see a weed during my mowing…

Downloads
108
Likes
16
Rating
5
P
Printablesericsnis

Honda lawnmower throttle handle

This is a replacement handle for Honda HRT lawnmowers. The original one broke on my mower, but the housing was not broken, so it only needed the lever part. Includes a cover for the side of the throttle lever if needed. The old lever can…

Downloads
108
Likes
8
Rating
0
P
PrintablesJosh0

Lawnmower Blade Balancer Remixed Base

I tweaked the bottom of the base of Materialistic_3D's Lawnmower Blade Balancer design ( https://www.printables.com/model/244656-lawnmower-blade-balancer ) to be printable without supports for printers that can handle 45º overhang. This…

Downloads
104
Likes
6
Rating
0
P
PrintablesDabomb

lawnmower wheel

lawnmower wheel

Downloads
99
Likes
14
Rating
0
P
PrintablesCicin

Lidl Parkside - PMRA 20-Li B2 - Robot Lawnmower disc

Replacement Blade Disc for Lidl Parkside PMRA 20-Li B2 Robotic Lawnmower (148mm Diameter) This is a replacement disc designed for the Lidl Parkside PMRA 20-Li B2 robotic lawnmower. Please note: There are multiple versions of discs for…

Downloads
93
Likes
10
Rating
5
P
PrintablesLukas141

lawnmower wheel

Structurally reinforced spare wheel for lawn mowers

Downloads
88
Likes
7
Rating
0
P
PrintablesCharles Smith

Lawnmower wheel

Lawnmower wheel for Husqvarna Royal 47. This model has no spare parts available, but it is stil function.

Downloads
84
Likes
3
Rating
0
P
PrintablesNas

Stihl Viking lawnmower grassbox full indicator flap - Stihl Viking indicador de llenado del cortacesped

I designed this to replace a broken grassbox fill indicator in my old Viking MB650 lawnmower. Viking lawnmowers are now sold under the Stihl brand, but I believe they still use this indicator flap in some models. The Stihl part number is…

Downloads
79
Likes
7
Rating
5
P
PrintableseRacoon

Ardumower robotic lawnmower 25cm wheel, two versions

Robotic lawnmower replacement 25cm wheel with wider profile and a car based rim design. Print with support. Mirror the print on Z axis for left/right orientation. Update: v2 added with wider wheels, more profile and seperate mounting.…

Downloads
77
Likes
10
Rating
0
P
PrintablesMart80

Lawnmower pull start handle

A printable replacement part for your lawn mower with a pull-start cord. Unfortunately, the original broke, so I designed this replacement part. Printed with PLA, it works great. However, PETG is recommended for its UV resistance. Have…

Downloads
75
Likes
18
Rating
5
P
PrintablesMarcin Kargula

Lawn mower Blade Balancer simple project for AL-KO OLEO MAC GFORCE lawnmower

I Designed simple Lawn Mower blade balancer. To create it you need only 2 berings 608, 1 screwe M4-55mm long 1 square nut M4, 4 magnets 6mmx2,6mm. Optionally 1more M4 nut & washer. Bu default you have central pin 10mm - suitable for Lawn…

Downloads
68
Likes
34
Rating
0
P
Printables2Mars

Mähroboter Kabelverleger - Lawnmower cable installer

Zum Verlegen des Mähroboterkabels mit dem Winkelschleifer den Rasen aufschneiden und mit dem Verlegerrad den Draht reindrücken. Material: Für den Zusammenbau benötigt man ein 10x10mm Alu Profilrohr oder Holzstab und eine M4 Schraube mit…

Downloads
68
Likes
9
Rating
0
P
PrintablesTheParrotGuy

Hinge pin for Flymo Turbo 400 lawnmower

A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one. Print Settings Rafts: No Supports: No Resolution: ~0.2 Infill: 50% or more Filament: any PETG or PC original is black Notes:…

Downloads
67
Likes
4
Rating
0
P
Printablesnexusz

Troy-Bilt lawnmower wheel bushing

Replacement bushing for the 12" rear wheels on my Troy-Bilt push lawnmower. It has a 1/2" ID and a 1 1/8" OD, with a flange on the end. I made the bushing slightly longer than the original since there was room to spare and I don't want it…

Downloads
66
Likes
8
Rating
0
P
PrintablesJPN_FI

VIking/Stihl lawnmower pinion

This is 10 tooth pinion gear for Viking/Stihl lawnmower used in many models like MB4 RT. This suits left & right Print the part with 0.6 with 0.4 mm nozzle (150%) line width to get extra strength. Also you could add 100% infill block…

Downloads
65
Likes
8
Rating
0
P
PrintablesPaul

Lawnmower

Just a small model of a lawn mower with a separate handle. Print Settings Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20% Category: Outdoor & Garden

Downloads
63
Likes
4
Rating
5
P
PrintablesSoupCake

Cable Clip for lawnmower

Needed a new cable clip as i ran over the old one For 22mm Handlebar and 6mm cables Category: Outdoor & Garden

Downloads
63
Likes
7
Rating
0
P
PrintablesSINGH DESIGN

wash nozzle for lawnmower

This is a lawnmower wash nozzle , a specialized accessory designed to make cleaning the cutting deck of your lawnmower easier. Key Features: The image shows two variants of the nozzle (Type 1 and Type 2), These nozzles have screw-on…

Downloads
62
Likes
16
Rating
4
P
PrintablesKoen.gauchez

Stiga lawnmower - foldable arm replacement

3D model: a foldable arm replacement part for Stiga lawnmowers

Downloads
61
Likes
5
Rating
5
P
Printablesbricker0813

Bowden Cable Holder for Lawnmower (GGP, AL-KO)

After the bowden cable holder of my father's GGP lawnmower broke the 3rd time and the local service shop wanted 20 CHF (22$ / 20€) for a new part, I went and looked for it on the internet. I found out, that AL-KO mowers use the same part…

Downloads
57
Likes
5
Rating
0
P
PrintablesBeeTinker

Bowden holder for lawnmower

Bowden holder for lawnmower with two spaces for power up the engine and for moving the lawnmower. Simple and useful print.

Downloads
57
Likes
2
Rating
5
P
PrintablesNutterflies

Lawnmower folding knob

Lawnmower folding knob with 8.5mm hole on it, room for M8 nut. Use PETG or ABS to withstand environmental effects and UV

Downloads
55
Likes
10
Rating
5
P
PrintablesOld Lady

Hub lawnmower wheel, Nabe Rasenmäher-Rad

Centerpiece for the wheels of our lawn mower Mittelstück für die Räder unseres Rasenmähers.

Downloads
49
Likes
7
Rating
0
P
PrintablesDavid Ondřej

Ryobi lawnmower replacement starter arms

Ive made this replacement for my ryobi lawnmower because the original parts cracked at the hinge point, both of them, so i made a strenghtened version, yes the lever angle is off by like 4 degrees, but that doesnt stop it from working…

Downloads
47
Likes
7
Rating
0
P
PrintablesMorten Møller

ESP32-CAM for lawnmower

No support required

Downloads
46
Likes
3
Rating
0
P
Printablesmichelluccote

Lawnmower Wall Mount for 6 inch wheels

This is a simple wall mount that I used to put up a plug in lawnmower onto my garage wall. The lawnmower has 6 inch wheels and this is an 18 inch lawnmower. The mount has many opening to make it strong enough to support the weight. This…

Downloads
45
Likes
8
Rating
0
P
PrintablesFrantišek

Lawnmower Handle Lever / Páka ovládání sekačky (Replacement Part)

Toto je náhradní rukojeť sekačky na trávu, která je určena k výměně poškozené nebo opotřebované bezpečnostní/ovládací páky u mnoha běžných sekaček na trávu s ručním pohonem. @Díl je vytištěn na 3D tiskárně a je plně funkční – montuje se…

Downloads
45
Likes
4
Rating
5
P
PrintablesStanley

Butterfly nut for Gardena 380 Cylinder Lawnmower

This is spare butterfly nut for all Gardena 380 Cylinder Lawnmower models. Original part is made of POM (Polyoxymethylene), but I made mine of PETG (threaded) and ABS (nut insert). Print instructions Category: Outdoor & Garden Summary…

Downloads
45
Likes
5
Rating
0
P
PrintablesPHabermehl

Radkappe für SABO Rasenmäher / Hub cap for SABO lawnmowers

Needed a replacement, and if it's worth doing, it is wort overdoing! So I designed a two-color custom hubcap for our lawnmower. A plain single-color version is also available. Print Settings Printer Brand: Prusa Printer: Prusa Clone…

Downloads
43
Likes
3
Rating
0
P
PrintablesGabT

Gaz cap lawnmower

Replacement for a broken gaz cap on lawnmower. It is print in PETG with 3 perimeter and solid layer for top was 5 Thread pitch of the cap is 3mm. Owner of lawnmowers as found no issue for now over the complete season

Downloads
43
Likes
0
Rating
0
P
PrintablesIdus

Klippo lawnmower front axle holder

The front wheel axle holder(s) broke on our Klippo lawnmower… so I made a replacement. This is the latest iteration and I suggest printing it in something really sturdy. Due to the strain on it - ABS might hold a while - but the latest…

Downloads
43
Likes
5
Rating
0
P
PrintablesBogusF

40x137mm wheel for for Lawnmower, 608 skateboard bearings

This is a wheel I designed as a replacement for my lawnmower, where the original has too much friction and a bad way of fixing it, so it kept getting loose. Might be useful for other projects too. It needs two 608 bearings and 8mm bolt of…

Downloads
43
Likes
7
Rating
0
P
Printablesmscalora

Height Adjust Knob - Troy Bilt TB230 lawnmower and many others

My mower's previous owner's dog chewed the height adjust knob so I wanted to make a replacement. It needs a bit of curve to it but I designed it flat so a little heat and a hammer help it go on. The tang it goes on is cupped and has a…

Downloads
43
Likes
2
Rating
0
P
PrintablesSaltyPkay

Manscaped LawnMower Skadis holder

Just need support for the skadis hooks Please give credit to original designer “ ziggyzig ” on Thingiverse

Downloads
41
Likes
5
Rating
5
P
Printablespinspanner

Black & Decker lawnmower fan

The fan blades all broke on my electric lawnmower so designed a version with wider, supported blades. In order to print the fan with no supports I redesigned the blade insulator to work with this specific fan. The printed fan must be used…

Downloads
40
Likes
5
Rating
0
P
Printablesdiealtebremse

Makita Lawnmower Parkside Adapter

This is an adapter plate for a Makita lawnmower to be able to use PARKSIDE X 20 V Team batteries.

Downloads
40
Likes
9
Rating
0
P
PrintablesMark J

Lawnmower Pulley

Pulley i made for my Wolfgarden Cart Outer Diameter 80mm Inner Diameter 26mm Hight 14.80 Belt size 9.7mm (properly also fit other sizes) i printed mine with Ender3 v2 ABS 10% infil, 10 Walls. Works like a charm for what its is. by request…

Downloads
40
Likes
3
Rating
0
P
PrintablesBacon2002

Honda Izy lawnmower - wheel bushings

Honda Izy lawnmower - wheel bush - flanged Size 13mm (ID) x 27mm (OD) x 20mm deep These replacement bushes are an upgrade on the original parts. The bushings on my old Honda lawnmower all failed. I found it difficult to find replacements…

Downloads
39
Likes
3
Rating
0
P
PrintablesSneakySnake

Wheel for Parkside Lawnmower

I was not really happy with the models that i found, either the tolerance was not very good or the wheel was too small to get proper grip. This wheel is easy to attach: - Remove the plastic cover of the wheel - Unscrew the bolt. - Remove…

Downloads
39
Likes
3
Rating
0
P
PrintablesLokva

Hook for wire to the robotic lawnmower

This is the hook for wire to the Gardena robotic lawnmower, but can be used with any other brand as long as the wire fits into the pin gap. The gap for the wire is 4.2mm. Since it's for outdoor use, at least use PET-G material.

Downloads
39
Likes
3
Rating
5
P
PrintablesTallahassee

Lawnmower Cogwheel

I've made this back in 2018 as a replacement for the broken one. Lawnmower is LUX-TOOLS B&S 750 EX DOV, I believe the cogwheel is for the gearbox-to wheels junction. I didn't have a printer, so I can't provide the print parameters. I've…

Downloads
39
Likes
1
Rating
0
P
PrintablesStigern

Funny Lawnmower Gnome

Funny Lawnmower Gnome Meet the hardest-working little guy in the garden! 🌱😂 The Funny Lawnmower Gnome is ready to keep your lawn looking perfect—or at least look adorable while pretending to do it. Few supports are needed. I used…

Downloads
38
Likes
6
Rating
0
P
PrintablesKruscle

Manscaped Lawnmower Trimmer Wall mount

Original design credit goes to peep111 I liked the original idea, but it had a lot of cutouts for accessories I didn't have/need, so I trimmed it down. Original also doesn't have any way to mount to a wall, as it's meant to adapt to an…

Downloads
36
Likes
8
Rating
0
P
PrintablesJeromy

Lawnmower Blade Balance

I made this because I could not find my balance after I sharpened my mower blade. I just didn't want to wait two days for delivery or run to the store when I could make it myself. Prints on my Prusa in a little more than an hour with no…

Downloads
36
Likes
3
Rating
0
P
PrintablesSilberstreifen

Ardumower robotic lawnmower additional bumper spring

Additional bumper spring to adjust the bumper force There are 2 Versions: for normal conditions for rough conditions Printed with PETG with 25% infill an 4 perimeters.

Downloads
36
Likes
3
Rating
5
P
PrintablesTheCafeRacer

Lawnmower Blade Balancer Universal Size (608 Bearing Remix)

Remix of hegelklimbo 's original balancer that uses 608 bearings. See photos and original for assembly. Some changes I made: -Converted it to use 608 bearings & a M8 shaft. -Tightened up some tolerances. -Added some 8-32 set screw holes…

Downloads
35
Likes
8
Rating
0
P
PrintablesAdamDavenport

Lawnmower fuel cap retainer/holder

The fuel cap on Briggs & Stratton lawnmower comes with a flexible plastic retainer so that the cap is never lost (or set on the ground where it could contaminate the gas). When the fail, they're not sold separately from the fuel cap. This…

Downloads
35
Likes
15
Rating
0
P
PrintablesRoni

Razor blade adapter for robotic lawnmowers / Rasierklingen Adapter für Mähroboter

Perfect emergency blades for robotic lawnmowers. F3d file is also included for adjustments . Printed in PETG for stability. Printed standing on the long edge, no supports, I have uploaded two different versions, one for 06 nozzles and one…

Downloads
35
Likes
3
Rating
0
P
PrintablesDonny G

Drive Gears Replacement For Self-Propelled Lawnmower Alpina AL4 46-S

Drive gears I tried to replicate for my Alpina AL4 lawnmower, as both factory gear teeth are worn out and I haven't found anywhere to buy them. These are not exact replicas, as they were measured with a caliper, but they get the job done,…

Downloads
34
Likes
5
Rating
0
P
PrintablesCoopr

Trampoline Leg Barrier for Robot Lawnmowers

Trampoline Leg Barrier for Robot Lawnmowers Prevent your robotic lawnmower from getting stuck on trampoline legs with this practical 3D-printed connector system! This model allows you to attach wooden slats to the legs of a trampoline,…

Downloads
33
Likes
12
Rating
0
P
PrintableseRacoon

Ardumower robotic lawnmower alternativ mowing body

Alternativ body part for the Ardumower.

Downloads
33
Likes
3
Rating
0
P
PrintablesOptimal Objects

Hank Hill's Mason 1500 Lawnmower

The Mason 1500 is the finest piece of lawn equipment I’ve ever had the pleasure of sittin’ on. Built with good ol’ American steel and powered by a no-nonsense V-Twin engine, it cuts grass cleaner than Roger Staubach's haircut. Mason…

Downloads
32
Likes
8
Rating
0
P
PrintablesKazdo

OLEO-MAC LAWNMOWER THROTTLE LEVER 66070341AR

OLEO-MAC Lawnmower Throttle Lever 66070341AR – replacement throttle handle for lawnmowers. Designed to restore full control over engine speed, compatible with selected OLEO-MAC models. Durable and easy to install.

Downloads
32
Likes
1
Rating
0
P
PrintablesMartin Tulak

Upgrade Old Lawnmower Wheels

.3mf file is designed for 215mm wheels. But you can scale it in slicer for bigger/smaller wheels New Life for an Old Lawnmower Recently, I decided to give my old lawnmower a new life by upgrading its wheels. I created a new tread pattern…

Downloads
31
Likes
7
Rating
0
P
Printablesglacefood

Lawnmower blade

For lawnmower with plastic blades.

Downloads
30
Likes
3
Rating
0
P
PrintablesDannyD
Downloads
30
Likes
4
Rating
5
P
PrintablesMAKERTEAM®

AL-KO Robolinho lawnmower canopy roofing adaptor (AL-KO Dachadapter)

This adaptor is made for AL-KO Robolinho loading base stations. We use a Robolinho 550W but the same homebase comes with other AL-KO modells. Check the pics. It is a slide-on adaptor for the main tower to hold an acryllic or wooden roof…

Downloads
29
Likes
3
Rating
0
P
PrintablesDaBub

Lawn grid for robotic lawnmowers

A lawn grid to help robotic lawn mowers have more grip in certain areas. This model can be printed on Bambu printers.

Downloads
29
Likes
3
Rating
0
P
PrintablesStuart800

LUX TOOLS Control Lever for Cordless Lawnmower

Replacement Control Lever for Lux Tools Cordless Lawn Mower The original lever is manufactured with an extremely thin cross-section at the point where it typically breaks. The original lever is too short, making breakage virtually…

Downloads
29
Likes
1
Rating
0
P
Printablesjakub

lawnmower

lawnmower

Downloads
28
Likes
4
Rating
0
P
Printablesmason

Cup holder for Lawnmower

This is a large cup holder for a lawnmower built in drain holes the mounting holes are for 3mm self taping screws up to 15mm deep no supports needed 20% infill 0.3mm layer high pre sliced with a draft setting for speed

Downloads
28
Likes
3
Rating
0
P
PrintablesBego

Lawnmower repair

Naše páka zámku rukojeti sekačky se zlomila, takže jsem udělal kopii. Matice má otvor pro závitovou vložku M6. Potištěno PLA If you like my work, please consider supporting me. Add a photo of your print 😁

Downloads
28
Likes
7
Rating
5
P
PrintablesSilberstreifen

Ardumower robotic lawnmower 25cm frontwheel and 12cm backwheel

Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters.

Downloads
28
Likes
3
Rating
0
P
PrintablesSilberstreifen

Ardumower robotic lawnmower 25cm frontwheel and 12cm backwheel with TPU-tyres

Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters. Tyres…

Downloads
27
Likes
5
Rating
0
P
PrintablesDimzila

Держатель кабеля электропитания газонокосилки (Lawnmower power cable holder)

Удобный держатель кабеля электропитания газонокосилки. Вешается на ручку и препятствует непредвиденному отсоединению кабеля вследствие его натяжения. Петля кабеля продевается через низ и укладывается по рельефному рисунку. Рекомендуется…

Downloads
27
Likes
0
Rating
0
P
PrintablesTho Fi

Lawnmower spare wheel 180mm

The wheel broke on the weekend, printed a new one in PETG until the replacement arrived, ended up holding the season. It broke when the trimmerline hit it, it held up until then. Printed with 6 permieters and 25% infill. PETG from…

Downloads
27
Likes
7
Rating
0
P
Printablescmcd2820

Lawnmower cable clip

Clip to hold the cables on a Craftsmen lawnmower handle. Lawnmower did not have anything holding the cables, so someone zip tied the cables tight to the handle. When the handle was folded up, the cables were over stretched and snapped.…

Downloads
27
Likes
1
Rating
0
P
PrintablesChillidogg7

Modified Dremel Lawnmower Blade Sharpener

Description from Usmar19 This is a modification of the Dremel Lawnmower blade sharpener. I redesigned it to be able to hold more flat to the blade's surface.

Downloads
26
Likes
6
Rating
0
P
Printableskillowatt

lawnmower battery pack

Customized version of http://www.thingiverse.com/thing:1351565 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1351565 Instructions Using the following options: $fn = 100 alt = 4 vary = 7 varx = 1 supalt =…

Downloads
26
Likes
3
Rating
0
P
PrintablesD4rkS!gns

Husqvarna Lawnmower Drivegear

I recently bought a used lawnmower and the seller decided to remove and discard the defective drive. Spare parts are expensive and hard to come by, so I did a bit of research into 3D design and came up with my own solution. Designed with…

Downloads
25
Likes
5
Rating
0
P
Printablesrebeltaz

Lawnmower Deck Height Knob

This is a shift knob for the Deck Level lever on a Harmony riding mower. It will most likely fit a whole range of other applications. The threads are 5/8-11, right-hand thread. If the knob doesn't stop at the correct position once it's…

Downloads
24
Likes
3
Rating
0
P
Printablesjfc.calado

Wall Lawnmower hook/support

Hook for store a lawnmower on a wall. It was designed for a 14cm wheel diameter and an 9kg electric lawnmower. The STL is one side only (just needs to be mirroed on the slicer. The code includes both sides and was sliced for Prusa MK4.…

Downloads
24
Likes
8
Rating
0
P
PrintablesTeamADW

EZ wire fence stake for dog / lawnmower invisible fence

I got tired of buying the easy to loose stakes for my Gardena (Husqvarna) robot's fence wire, so I designed these. They print fast, I use 2 walls and 20% infill, .03 layer height. They dont need to look great, just need to be able to be…

Downloads
23
Likes
3
Rating
0
P
PrintablesThe Olly Bee

Milwuakee lawnmower fan attachment

Hello I created this attachement for the Milwuakee Lawn Mower 2823-22HD so that you can attach the M18 Milwuakee packout fan 0818-20 With this you will need the following parts 2 X Rods 15 ¾" long with a diameter of 19.30mm (this rod can…

Downloads
23
Likes
3
Rating
0
P
PrintablesSimon Chalmers

Lawnmower grass box handle

The handle on my lidl florabest lawnmower broke so i designed this to replace it.

Downloads
23
Likes
5
Rating
0
P
PrintablesSilberstreifen

Ardumower robotic lawnmower next gen bumper spring

The new design is nearly unvisable, has a more even power build-up and protects the switches behind it. Printed with PCTG or PETG with 25% infill an 4 perimeters.

Downloads
23
Likes
1
Rating
0
P
Printablesgregor
Downloads
23
Likes
3
Rating
0
P
PrintablesPouOu

Gardena Robotic lawnmower mounting ring

A disc to mount the Gardena Robotic lawnmower securely with screws. FUSION 360 FILE IS INCLUDED

Downloads
21
Likes
4
Rating
0
P
PrintablesIJsklontje

Yamaha Lawnmower Drivegear

All the teeth of the original gear where stripped which caused the lawnmower to lose its drive. Instead of purchasing a €85,- new part I printed one myself for €2.

Downloads
21
Likes
2
Rating
0