Search results: lens

Sort order

4,295 models

P
PrintablesElektronaut

M42 Body & Lens cap

The body cap has a slightly undersized M42x1 thread and the rear lens cap has a sightly oversized M42x1 thread. This ensures a loose fit. The prints shown in the pictures were done with a layer height of 0,15mm.

Downloads
1,377
Likes
96
Rating
5
P
Printables3DHirn

55mm One Piece Lens Cap

Idea I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that. Printing The print is fairly self explanatory, just print it with the logo side down…

Downloads
1,065
Likes
105
Rating
4.75
P
PrintablesM1Designs

Camera Lens Cap 58mm

Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…

Downloads
846
Likes
52
Rating
4.5
P
Printablessteffenbew

iPhone 12 Lens Filter Mount

Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…

Downloads
473
Likes
51
Rating
0
P
Printablesdteng

LED Light Pipe and Lens for Original Prusa MMU3

The LEDs on a stock MMU3 are difficult to see unless looking directly into the holes, especially when viewed from the front with the MMU mounted at the standard angle. These light pipes and lenses disperse the light over a wider angle…

Downloads
353
Likes
104
Rating
4.97
P
Printablesoltas

Feder für Sony Objektivdeckel, spring for sony lens cap

Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.

Downloads
339
Likes
71
Rating
5

Lens Cap 49mmØ

Hey there :) Step 1: Load the files into the slicer Or you use the prepared gcode, just look at the requirements Step 2: Correct the orientation of the models: The FRAME is printed with the Logo facing down and the bridging should be from…

Downloads
332
Likes
43
Rating
4.2
P
Printableskevsparky

Canon Lens Back Cover

A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…

Downloads
315
Likes
57
Rating
5
P
PrintablesBitScout

Lens cover for AUKEY webcam

New: v2, which is a lot more solid, doesn't catch on the lens bulge and only slides off sideways. Three versions of a simple webcam cover for the 1080p AUKEY webcam (the wide one, with microphones on each side). The cover slides easily…

Downloads
229
Likes
16
Rating
5
P
PrintablesPenguinNinja

Bokeh lens filter (fits over a 58mm lens)

This is an attachment for a bokeh filter. It fits over a 58mm lens. I designed the base free to rotate, so that I can make bokeh images in the background rotate also. Each filter slides into the top of the base. I have 17 pre-made filter…

Downloads
219
Likes
47
Rating
5

Lamellenstopfen 40mm x 40mm

Lamellenstopfen als Abdeckung für ein 40mm x 40mm in 3mm Stärke Formrohr. Ich habe dies in PLA gedruckt und funktioniert einwandfrei. Standard Slicereinstellungen 0,2 mm und 15% infill.

Downloads
197
Likes
5
Rating
4
P
PrintablesFelixAtter

lens cover for uconsole

clip on lens cover for uconsole by clockworkpi Prints with no supports with flat against build plate

Downloads
188
Likes
14
Rating
0
P
PrintablesBM

Extra-wide lens hood Canon EW-73D alternative

The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…

Downloads
170
Likes
12
Rating
0
P
PrintablesStampBoutique

49mm lens cap with flaps

49mm lens cap with flaps for easy screw and unscrew.

Downloads
166
Likes
6
Rating
5
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Downloads
137
Likes
6
Rating
0
P
PrintablesGeoff

Kodak Type M Cine Lens Adapter for MFT Cameras

I didn't know of any available adapters for these unusual lenses, so here one is! The smart little Kodak Cine-Ektar 25mm f/1.9 is the only one I have tried, but the coverage on a Four Thirds sensor is pretty good and it is quite usable. I…

Downloads
121
Likes
7
Rating
0
P
Printablesb8trez

Leupold VX-5HD - Flip up style objective / ocular lens cover set - 44 mm objective

Hey team, I've put together an objective and ocular ‘flip up style' lens cover to suit the Leupold VX-5HD. Leupold themselves make absolutely stunning lens covers ( example ), which are beautifully machined out of aluminium and fit their…

Downloads
105
Likes
14
Rating
0
P
PrintablesVBalsa

Pixel 9 Pro Moment T-Series Lens Mount (Ringke Onyx Case)

Print at normal speed with a dark color PLA. Light can pass through white PLA and cause lens flare. The file has the correct orientation, print w/ organic supports. Will require some very light sanding. This may fit into other cases that…

Downloads
105
Likes
17
Rating
5
P
PrintablesBouggo

Brillenständer in Katzen-Design – Glasses Stand in Cat Design

Hiermit drucken Sie einen Brillenständer im Katzendesign aus. Sinn und Zweck ergeben sich aus den Fotos. Die farbigen Bilder stammen von BlocksCAD, mit dem ich das Objekt erstellt habe. Ich habe einen weiteren Ständer entworfen:…

Downloads
103
Likes
6
Rating
0
P
PrintablesSpotmatic

Version 1: Lens cap for TLR with mounted filter, bayonet 1 (Aires reflex, Rolleicord, Rolleiflex, Yashica, Minolta)

Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…

Downloads
95
Likes
11
Rating
0
P
PrintablesThomas Mayr

Fujifilm Lens Stand

Only works with original Lens bottom caps. Shape is slightly conical and was adapted to fit them perfectly. Printed on Prusa Mini+ with PLA

Downloads
83
Likes
18
Rating
0
P
Printableseof

Reinforcement Glass Stand / Verstärkter Brillenständer

I include the Fusion source, so that one can adjust it to personal needs.

Downloads
81
Likes
7
Rating
0
P

Canon-FD lens mount cap

Simple Canon Fd mount cover cap to protect your lens mount. Works with interlocing lens mechanism.

Downloads
80
Likes
8
Rating
0
P
PrintablesFazal Majid

Lens caps for the Zeiss Victory Pocket 8x25 binoculars

Objective and eyepiece covers for the Zeiss Victory Pocket 8x25 binoculars. Print instructions Use PETG at the 0.10mm Detail setting, rotate 45º so the lines are parallel to the lens axis.

Downloads
62
Likes
3
Rating
5
P
PrintablesYao Wei

Sirui/Moment Lens Adapter for iPhone X/XS

Model originated from Thingiverse and fixed model issues. Please note that phone cases may be needed in order to properly hold this adapter. This model is confirmed to be able to fit into Rhinoshield SolidSuit, but may require cutting the…

Downloads
59
Likes
4
Rating
0
P
PrintablesBrightGecko

M7 sensor lens casing for OV5647 (ZeroCam / Arducam)

Replace the original M6 threads on the OV5647 sensor (Arducam/Zerocam) to M7 threads with this casing. Before changing the threads, you need to remove the original M6 lens casing from the OV5647 sensor body. To do this, you can carefully…

Downloads
41
Likes
1
Rating
0
P
PrintablesGlenn Brockett

Bahtinov Focus Hood for 69mm lens

A simple “Drop over” Bahtinov mask for camera lenses under 69mm. (Half of my lenses work with it.) Place over your lens and focus on a star until the | splits the X. https://en.wikipedia.org/wiki/Bahtinov_mask Pattern generated using:…

Downloads
36
Likes
4
Rating
0
P
Printablesknopersikcuo

Sinar lens board 26,3mm

Hi, Sinar lens board (139x139mm) with ~26,3mm hole, the circle which is “deeper” is 20mm deep and have 100mm diameter. Print in PLA laying on the front with supports inside the ring. 27.05.2025 / Added version with 30mm depth ring.

Downloads
29
Likes
4
Rating
0
P
PrintablesKen Hammond

Bushnell Citation Binocular Lens Cap

Replacement lens cap for Bushnell Citation Binoculars

Downloads
24
Likes
5
Rating
0
P
PrintablesTi

Opticron BGA 8x42 Lens Cap

This is an eyepiece lens cap for an Opticron 8x42 BGA monocular. The rubber cap supplied with this monocular is very easy to knock off or misplace as it sticks out from the body of the monocular and has no retention mechanism; this print…

Downloads
21
Likes
1
Rating
0
P
PrintablesJesseW3D

Pegboard Zeiss Lens Wipe Holder

I printed this on my Prusa Mini+ in PLA with supports everywhere using the 0.20mm STRUCTURAL preset with 20% infill.

Downloads
20
Likes
2
Rating
0
P
PrintablesPhilo_fo

Lens cap for FUJIFILM X-Half Camera (X-HF1)

I printed it using two color metallic PLA filament and the octagram spiral pattern on the top and bottom. You can obtain the printing setup form the gcode (for Prusa XL) below. The result looks quite good, and given the minimal effort…

Downloads
19
Likes
3
Rating
0
P
PrintablesJorreto

Soporte AiLens para Cutebot pro

Es un soporte para la cámara Ai Lens de Elecfreaks. Se sujeta sobre el sensor de ultrasonidos del cutebot pro. Se le han añadido un par de orificios para tornillos, pero no es necesario, se sujeta bien. De esta forma se puede llevar el…

Downloads
17
Likes
2
Rating
0
P
PrintablesGuido3D

Sun filter lenses box

Protecting box for magnetic solar filter lenses This a box that fits foldable magnetic sunfilter. The filter is designed to magnetically connect to eyeglasses models as Carrera (Luxottica). The box can be used to put the folded eyeglasses…

Downloads
15
Likes
2
Rating
0
P
Printablesimhavoc

43mm-67mm Lens Cap Holder — Thin Camera Straps, 8 Minute Print

Keeps your lens cap on the strap instead of in your pocket, in the bag, or on the floor of a parking lot. Prints in under ten minutes from whatever is left on the spool. Fits — the cap Any 43mm-67mm center-pinch lens cap. Retention is on…

Downloads
11
Likes
1
Rating
0
P
Printablescombobulator

Lens Cover for Bosch GTC 400 C Thermal Camera (16055002CR)

Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…

Downloads
10
Likes
1
Rating
0
P
PrintablesMatt Boyer

PSVR2 Hanging Lens Cover

A dust cover for your psvr2 PSVR2 Lens Cover

Downloads
10
Likes
3
Rating
0
P
PrintablesNorberto
Downloads
10
Likes
2
Rating
0
P
PrintablesJed LaRue

Contact Lenses Box

Contact Lenses Box for traveling.

Downloads
9
Likes
0
Rating
0
P
Printables3D2H

Carry-on Box - TriShade & CMF Lenses (print in place)

I was looking for a carry-on box for my TriShade design https://www.printables.com/model/1300501-trishade-optimised-light-protection-for-mobile-tri This is the result, including the lenses provided by CMF. NOTE: I don't have the lenses…

Downloads
7
Likes
0
Rating
0
P
Printables3dstc

stollensohle Handarbeit

für Handarbeitsfiguren ( Fussballer, Sportler ) eine Stollensohle

Downloads
6
Likes
0
Rating
0
P
PrintablesLXO

Rear lens cap for Sony E-mount

Just as it sounds, it's a rear lens cap for your E-mount lenses. 12 times cheaper than buying it from Sony! Works on my lenses and with my printer but tell me if you believe i should change anything. edit: Added a double mount to be able…

Downloads
5,599
Likes
448
Rating
4.78
P
Printablesyor42

Meta Quest 3 Lens Cover

Basic 3D printable lens cover for Meta Quest 3. It is designed for default facial interface, so it might not fit with other ones. It doesn't block proximity sensor and shouldn't touch lens directly, but I still recommend putting…

Downloads
4,418
Likes
445
Rating
4.97
P
PrintablesPrusa Research

президент тут Volodymyr Zelenskyy Bust

This is a bust of Ukrainian president Volodymyr Zelenskyy in combat gear, who has shown his outstanding leadership skills, resolve and courage during the ongoing Russian invasion of Ukraine. #StandWithUkraine

Downloads
3,232
Likes
900
Rating
4.99
P
PrintablesStepan Broz

Nikon F Lens Cap

What else there is to say? It's a lens cap for the Nikon F mount. You always need one more. Print Settings Rafts: No Supports: No Resolution: .20 Infill: 100% Filament: Filament PM PETG Black Notes: Prints without supports. Extra…

Downloads
3,128
Likes
253
Rating
4.98
P
PrintablesLXO

49mm lens cap

A 49mm lens cap that I made. Works great with my Sony lenses. Be careful to use this lenscap with too rounded lenses as the backside of this lens cap is flat for easier printing. I made a lite version, see "49mm_lenscap_V3_lite.stl" which…

Downloads
3,007
Likes
201
Rating
4.76
P
Printablesvolzotan

Disposable Camera Lens Adapter

They're easy, they're cheap and they can be a lot of fun: disposable cameras. If you still got one around, you can remove the plastic lens from the camera housing and print a lens holder for a Sony E-mount camera. All you need is a bit of…

Downloads
2,879
Likes
288
Rating
4.79
P
PrintablesGyoenastaader

Hadley Mirror and Lens Covers

Update September 12, 2022: Added CAD Step files. Mirror covers for the Hadley. The primary cover can be used for the main mirror, and the bottom of the secondary mirror holder. The web mirror is intended to go on top of the web. The lens…

Downloads
2,604
Likes
194
Rating
4.95
P
PrintablesNominal Brand

Rear lens cap for Canon EOS EF and EF-S lenses

Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…

Downloads
2,466
Likes
495
Rating
5
P
Printablesckth

Meta Quest 3 Lens Cover

So I wanted to try out modelling the lens cover for the Quest 3 to conform nicely to the default interface but using simpler shapes so it's easier to edit / play around with. NOTE: I've only tried this with the silicon facial interface…

Downloads
2,349
Likes
300
Rating
5
P
PrintablesCypherA7

Spider-Man PS4 Faceshell + Interchangeable Lenses by HappyMoon on Thingiverse

I've seen this Spiderman PS4 faceshell on thingiverse and I wasn't sure if HappyMoon had uploaded it to Printables yet or not so I figured I would share it with this community in case anyone hadn't seen it. It looks like an awesome…

Downloads
2,332
Likes
294
Rating
5
P
Printablesdoroteo

MEDIUM FORMAT CAMERA for MAMIYA PRESS LENSES

Hi! This project is a medium format to be used with Mamiya Press lenses. I uploaded a photo taken with this camera. A Fusion 360 file is attached for you to be able to modify it. The information related to this camera can be found in…

Downloads
2,184
Likes
777
Rating
4
P
PrintablesThomPatterson

Camera Lens Filter Adapter - All Sizes

Why buy multiple filters for all your lenses when you could buy one filter and reuse it for all your lenses. You just need this simple adapter. I've included the two sizes I needed (step-up 49mm to 67mm, step up 43mm to 67mm) which I have…

Downloads
1,987
Likes
142
Rating
5
P
PrintablesFindusdwarf

Pillenspender-Pill Dispenser

Dec 17, 2022 Please read the entire description before downloading! This is a pillbox with 7 compartments for the whole week. Approximately 20mm x 20mm x 136mm in size. For the hinge I use a piece of filament with ø1,75mm that is about…

Downloads
1,748
Likes
162
Rating
4.94
P
Printables3d printing

lens caps

a functional camera lens cap with all sizes for your camera if you lose yours, and is fit for any camera!

Downloads
1,656
Likes
830
Rating
4.89
P
PrintablesMichal Fanta

The Lens Filter Wrench Set

Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771

Downloads
1,646
Likes
224
Rating
4.94
P
Printablesthenickdude

Sony E/FE lens mount

This is a printable model of the mount found on Sony E/FE lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended), PLA, or my pick, ABS. For ABS I had to…

Downloads
1,607
Likes
109
Rating
5
P
PrintablesJP

Canon EF 50mm F1.8 STM Lens Hood

A lens hood for Canon EF 50mm f1.8 STM lenses. Can be used both as as hood and as a protective case. Print Settings Resolution: 0.1mm Infill: 100%

Downloads
1,519
Likes
212
Rating
5
P
Printablessilviu

Canon EOS RF Rear Lens Cap

Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.

Downloads
1,465
Likes
126
Rating
4.91
P
Printablesthenickdude

Canon EF/EF-S lens mount

This is a printable model of the mount found on Canon EF/EF-S lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended) or another filament like PLA. This is…

Downloads
1,458
Likes
91
Rating
4.67
P
PrintablesKiril

deep 55mm lens cap

This is a deep easy to handle 55mm lens cap. It is 4 pieces outer shell, buttons with spring, and 2x jaws for each side The lens cap snaps together after printing. Please use PLA and 0.20mm quality settings. See notes for PETG below. To…

Downloads
1,358
Likes
112
Rating
4.79
P
PrintablesMatsErik

Oculus Quest 2 Lens Cover

Designed a lens cover for my lens distance setting. Using the Blender file, you can redesign for yours

Downloads
1,311
Likes
235
Rating
4.75
P
PrintablesSPRKPLG

Ligero69 Camera Body for Mamiya Press lens & M-mount roll/cut film back

Thank you all for the kind messages! Can't wait to see your images, please tag them in social media #ligero69 where possible. Much love! ……… Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required…

Downloads
1,260
Likes
184
Rating
5
P
PrintablesGiwi

Canon Lens Hood 58mm

This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm

Downloads
1,152
Likes
118
Rating
4.91
P
PrintablesCatdad Workshop

82mm lens cap (print in place)

I recently purchased a well-used camera lens which came with a lens cap that was missing the springs on one side. Seeing as I own a 3D printer and have access to the internet, that should be a not-really-a-problem that is easy to solve. I…

Downloads
1,152
Likes
91
Rating
4.88
P
Printablesyukosteel

Leica M mount 6bit lens coding template

Precise template for 6bit coding of Leica M mount lenses. It's inspired by existing "Leica M Coding Tool" but that one didn't work for me, so I've used caliper to measure Leica M10 mount and designed more precise model from scratch. NOTE:…

Downloads
1,152
Likes
34
Rating
5
P
PrintablesPrintile

Disposable Camera Lens Adapter for Fujifilm (Updated)

Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…

Downloads
1,136
Likes
156
Rating
5
P
PrintablesTim O'Brien

O3 Mod - Lens protection for the DJI O3 Camera. Add to any quad.

Companion project to my other parametric configurable FPV designs: O3 Pod O3 Frame Action2 , 3+4 AcePro GoPro Mini Hero 9-12 Antenna Mount Join my discord to request any custom version! Alternatively use telegram or printables-dm. New: O3…

Downloads
1,074
Likes
68
Rating
4.4
P
PrintablesKatz Creates

Camera Lens Mounted Teleprompter

UPDATE: Thanks to community feedback I have added additional sized inserts for different phones (so there's more of a chance of a snug fit for your phone, but a looser fit is okay long as it doesn't fall out!) as well as a version with…

Downloads
1,052
Likes
305
Rating
4.75
P
Printablestwothingies

Lens Cap Holder for Camera Strap

This is a simple holder for lens caps. Now, you don't have to worry about losing or misplacing your lens covers while on the go. This 3D printable model will keep them safe, secure, and easily accessible. It is a very simple and quick…

Downloads
1,038
Likes
316
Rating
4.95
P
PrintablesSPRKPLG

LigeroLG & GansoLG Camera Body for Lomograflok + Mamiya Press or Polaroid 600SE Lens

Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required may set you back about $105-135+. With material on top of that, consider buying the real thing at: https://sprkplg.com/product-tag/llg/ If you…

Downloads
1,022
Likes
155
Rating
4.57
P
PrintablesMartunex

Quest 2/3s Lens Protector/Glasses spacer

Remixed quest 2 lens protecor. Print 2 of them and rotate (not in slicer) accordingly to each eye. The glasses spacer/lens protector is design to keep your glasses from rubbing on the lenses causing scratches on them. this is useful if…

Downloads
1,022
Likes
87
Rating
5
P
PrintablesThespianMask

Quest 3 Lens Adapter

This is a lens adapter using the “Quest 3 lens adapter template” by Anonymous Hermit here at Printables, as well as "Oculus prescription lens adaptor" by tanvach over at Thingiverse. Printed with generic white PLA. 100% infill, 0.12 layer…

Downloads
1,008
Likes
59
Rating
0
P
PrintablesBoopidoo

Lens Caps (one part print)

I needed a lens cap for my Raynox-250 macro lens to go with the rear cover I designed earlier. After some modifications to make it easier to adjust dimensions I've uploaded more cap sizes. Print without support. After print, place the cap…

Downloads
967
Likes
152
Rating
4.96
P
Printableserktheoger

Instax Mini Evo Lens Cap

The cover fits within the standard instax cover, the cover does close completely on the magnet. Printed using voron2.4 Magenta esun ABS, 0.4mm nozzle, print with brim (recommend 3mm), print face down

Downloads
957
Likes
74
Rating
5
P
Printablesthenickdude

Rear lens cap for Canon EF

Rear lens cap to suit Canon EF and EF-S lenses. Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament: Plasty Mladeč PLA Black Slicing settings: Perimeters: 2 Seam position: Random The cap has three internal flanges which…

Downloads
918
Likes
82
Rating
4.91
P
PrintablesBent Derailleur

Nikon Z Rear Lens Cap

Nikon Nikkor Z Rear Lens Cap, original looking but slightly shallower (just because it was not necessary since my design has flat top). Tight fit so it sits secured. Original measurements so it protects whole width of flange. If you like…

Downloads
915
Likes
70
Rating
4.82
P
PrintablesLXO

Rear lens cap for Pentax K-mount

Just as it sounds, it's a rear lens cap for your K-mount lenses. Works on my lenses and with my printer but tell me if you believe i should change anything. Print Settings Rafts: Doesn't Matter Supports: No

Downloads
909
Likes
82
Rating
4.91
P
PrintablesSpotmatic

Lens hood 49mm (push on)

A lens hood for your 50mm lens (filter diameter 49mm). No thread - just push on. Use the Fuzzy Skin option in PrusaSlicer if you wish. No support required. Paint the interior matte black. Do you like it? Please consider to buy me a cup…

Downloads
897
Likes
112
Rating
5
P
PrintablesKrhom

DJI O4: O3 Lens Mod Alignment Jig

Lens Mod Instructions Note If your adapter piece doesn't fit the jig, you might have the slightly different version that's more square. Thankfully, the ever helpful @Tokyo_Dom_663158 made an alternate version of the jig for those!…

Downloads
885
Likes
41
Rating
3.5
P
PrintablesReallyrapid

GoPro Hero 12/11/10/9 & 11 Mini Lens Cap

I updated my GoPro Hero 8 lens cap for the GoPro Hero 11/10/9 & 11 Mini. This lens cap was designed so that there is a large gap between the lens and the cap so that if any dirt or sand gets trapped in there it wont ruin your lens whitest…

Downloads
885
Likes
158
Rating
4.89
P
Printablessh

😎 Party fun "nerd" glasses with interchangable lenses (choose your own pattern)

Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

Downloads
884
Likes
124
Rating
5
P
PrintablesThomPatterson

Front Lens Caps - All Sizes

Fully 3D printed spring-fitting front lens caps for every lens with filter sizes from 40.5 mm to 82 mm. Find the filter size you need for your lens (it's likely written on the front of it), then download the “main” and “insert” for that…

Downloads
880
Likes
72
Rating
4.67
P
PrintablesYalper

Lens cover for DJI Osmo Action 5 Pro

Description: Introducing a cover specifically designed for the DJI Osmo Action 5 Pro. This piece not only provides excellent protection for your device but also features a knurled grip that enhances handling and installation. Features:…

Downloads
867
Likes
62
Rating
4.83
P
Printableseli

X Mount rear lens cap Fujifilm XF

Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.

Downloads
860
Likes
59
Rating
5
P
PrintablesLordMelkor

Fuji X-mount Camera Body Lens Cap

Lost the body cap for my fuji x camera, remixed file to recreate the same. Should be comparable to Fujifilm's Camera Body Lens Cap BCP-001 Printed with a 0.6mm nozzle at 0.2mm layer height with support cubic infill for ~35min print time.…

Downloads
839
Likes
28
Rating
0
P
PrintablesSharkLotus

DJI Goggles 3 Lens Protector

Lens protector for DJI Goggles 3 (May also work with Goggles 2 or Integra but I don't know for sure) Printed in TPU with 40% infill.

Downloads
829
Likes
39
Rating
5

Single Press Lens Cap

Need: Lens cap that can help prevent scratches and excess dust on the front element. This is my take on a solution to that need. This design uses common springs found in ball point pens. The spring dimensions are 4.5mm Diameter and 18mm…

Downloads
828
Likes
306
Rating
4.93
P
PrintablesPhysics Dude

Ultra minimal M42 to Nikon F-mount lens adapter

I found an old Carenar lens with a M42x1.0mm threaded mount (not to be confused with T-mount which is a M42x0.75mm thread) that I wanted to use with my Nikon DSLR, but the only adapter I found claimed “INFINITY Focus NOT ALLOWED.” This is…

Downloads
827
Likes
74
Rating
4.67
P
PrintablesAnonymousHermit

Quest 3 lens adapter template

Edit 2023-10-21: Q3 Lens Adapter Template V2 I noticed that the ridge by the nose is actually curved. That curve is now incorporated so the adapter sits flush. --- This fits into the Quest 3 lens well. Bring your own lens adapter or just…

Downloads
822
Likes
43
Rating
0
P
PrintablesDesignLabX

HuskyLens Case

This is a 2-part snap-together protective case for the HuskyLens AI vision sensor v1.1. The case & camera can be mounted with M3 screws. Holes in front are for bilateral white LEDs, RGB LED and lens. Raised arcs on top protect the control…

Downloads
821
Likes
13
Rating
0
P
Printablescolinhalebrown

Canon EF Lens to Sony E-Mount Body

Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.

Downloads
821
Likes
28
Rating
0
P
PrintablesColgS3b

Nikon lens end cap F mount

Cover for the mount side of Nikon lenses. Tested with: AF-S NIKKOR 16-80mm 1:2.8-4E ED NIKKOR-S Auto 1:1.4 f=50mm NIKKOR-Q Auto 1:3.5 f=135mm Rokinon 1:1.4/85mm AS IF UMC Designed in FreeCAD Print instructions Print with the open side up.…

Downloads
817
Likes
72
Rating
4.4
P
Printablesairpipelab

Fresnel Lens

I designed the Fresnel lens in solidworks, it's show the fresnel lens about principles of physics. if you have any question about fresnel lens principles of physics ,please contact Mr. David. [email protected].

Downloads
802
Likes
27
Rating
5
P
PrintablesSeko

LUMIX L-Mount Lens Cap

UPDATE: Ver5 with Lumix written on the inside and some adjustments for a better fit. Tested on native Lumix lenses and K&F Lens Mount Adapters.

Downloads
788
Likes
46
Rating
3
P
PrintablesSpielkind

Samy the spectacled snake - Samy die Brillenschlange

Samy the spectacled snake Ich wollte einen einfach zu handhabenen Brillenhalter den mann gerne anschaut. Und so entstand Samy. Vergesst bitte nicht den Like, wenn er euch gefällt. Ich hoffe Ihr habt auch Spass mit Samy.…

Downloads
787
Likes
126
Rating
5
P
PrintablesChrisE

Lens Cases for Canon EF-M / Canister Set

Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…

Downloads
771
Likes
198
Rating
5
P

Pi Camera Lens Focus Adjustment Tool

Focus adjustment tool for Raspberry Pi Camera V2 Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: 3D Printing

Downloads
756
Likes
33
Rating
4.8
P
Printablesjay16799

Bahtinov Mask for 18-55mm Lenses

Summary of Concept This is a 3D printable Bahtinov Mask to assist with manually focusing on the night sky. Bahtinov masks work by creating diffraction spikes from a point light source (like a star) spread out across different sections of…

Downloads
756
Likes
54
Rating
5
P
Printablessowa705

52mm lens cap (improved version)

Improved version of my older 52mm lens cap. Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports. Print one 1x body with your selected design and 1x spring

Downloads
754
Likes
65
Rating
5