653 models
Der Ständer hebt das Notebook um ca 5cm an. Dadurch passt es besser zum zweiten Hauptbildschirm und ist ergonomischer. Darüberhinaus sorgt für bessere Luftzufuhr zum Notebook. Neben den beiden Seitenteilen besteht der Ständer aus zwei…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Print upside down Scale it as you like :)
Print approx. €4.45–€5.43 excl. taxPreliminary estimate for one variant
1 central 4 left 4 right sticks folie
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
After watching Castlevania Nocturne, and then rewatching the first 4 seasons of the magnificence that is Netflix's Castlevania, I went to print off a belmont family plaque to have on my wall, only to find there really weren't any? which…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Simplemente se debe de poner en el suelo con el cuenco encima, el tamaño de este gadjet es el de mis cuencos.
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
This design came from the frame's low ability to stand in portrait view. I designed it in 10 degrees and can re-design it for the adjustable inclines. Please let me know if it is needed.
Print approx. €0.99–€1.22 excl. taxPreliminary estimate for one variant
My printers are sitting on a paver (slab of concrete), which is itself on top of a bit of foam rubber. This substantially reduces the noise produced by vibrations that resonate in the table beneath the printer, but also lifts the printer…
Print approx. €18.13–€22.15 excl. taxPreliminary estimate for one variant
A tablet and 2-in-1 laptop stand to elevate the device by around 8.5cm. The grooves where the device sits are made extra wide and the supports extra tall to account for said laptops. Honeycomb walls make it look pretty. No hardware for…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
100x160mm sign, with instructions from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs .
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This is a modified cable chain end mount for the Ender 3 V2, allowing the chains to be mounted so they run nicely parallel to each other and the printer. I've also added all the other bits you need to print a cable chain for the Ender 3…
Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…
I modeled this vase after i did the luxury vase, because i wanted one thats easier to scale. I also made a tripleversion of this, and changed the design a tad for that. Looks also amazing printed. :) Prints best with an 0.6 or 0.8mm…
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit…
World map (Robinson projection) with approximative elevation About 1.5m large Can be printed with every kind of settings. The one visible on the picture has been printed with a 0.6mm nozzle, 0.32 layer height, 2 perimeters, 5% gyroide…
Tyre Lever - Tyre Monkey - Leva smonta gomme Update: added Rev2 03/24/2025 - TLM_REV2 + TLM_REV2 Lacet added Rev1 Resize to adjust dimension Material Recommendation: For non-heavy-duty use, PLA+ performs excellently. For more demanding…
This is a small and simple triangle key for opening the outside door of an elevator shaft. As i did an internship at an elevator maintenance company when i was in highschool I know my way around an elevator reasonably well. Since i lost…
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Elevated cat bowls stand with a 15° tilted design for raised food bowls, suitable for puppies, cats, and small dogs. The size of the stand is 150*140*150mm. This design is compatible with IKEA’s OFTAST Bowl.…
The elevation system to use with the basic tile to create different levels in your marble track. The sticks fit into the holes of the basic tiles and can be fitted either in; the ground plate, another basic tile or the spacer plate. The…
The Elevate Bit Imitation for Beyblade X The dimensions will vary slightly depending on the print orientation. It looks better with the tip up, and the burst balance is better with the tip down. The tips are slightly higher, so if you are…
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
After a recent trip to the Nordschleife with my friends I wanted to create a small memento of the visit. This is a great item for anyones desk, mantle piece or wall. Just scale to the size that suits you and admire the elevation changes…
Description I wanted something that could elevate my MacBook Pro 13" while letting me close the lid. Many other “elevators” hooked onto the sides of the laptop, preventing the screen from closing. Version 1 : a simple rounded bar, width…
Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…
Bicolor elevator buttons inspired by Luigi's mansion 3
Large model so you can scale down to your bed size or cut it up and make it as big as you want. I printed it in about 6 pieces to make a large wall décor piece.
Elevación con ventilaciones para la K1 con bisagras 9/5/24 Se añadió la parte trasera de la K1, va justo para que no se levante por el movimiento del teflón Para hacer la elevación completa como en la imagen se necesita imprimir : 1…
Update 12.08.2025: Added Pillars in 50mm, 60mm, 80mm, and 90mm NOTE: The “Pillars height” is not its actual height, but the total height of the tower you get using it. Example: Base + Pillar50 + Head (Another Base) has a total Height of…
Si sos amante del mate, este llavero en 3D es el accesorio perfecto para vos. Con un diseño detallado y realista, este modelo captura la esencia de la tradicional infusión rioplatense, ideal para imprimir y llevar siempre con vos un…
Walthers grain elevator scaled down to Z scale. Prints easily with no supports. It is wise to print the pipes and glue them later on.
Wings are now more than one layer thick, more durable. BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.
Declutter and elevate your kitchen with this 3D-printed, print-in-place mug shelf. Designed with a stylish perforated surface to reduce material use while maintaining strength, it maximizes vertical storage space for your mugs. The sleek,…
Chevre moteur ou cric pour les diorama 1/64 ou hotwheels support nécessaire à l'impression
Update: New size! Even higher model (20mm) to create epic scenery for your battle! “No more sliding tiles - just epic battles.” I designed these pieces after being frustrated with other 3D terrain models constantly sliding across the…
I designed this elevator panel for my son who absolutely loves collecting the Elevator Buttons created by Stephane from random ghosts around the house. Now he can go one step further and screw them into an actual panel hanging on the wall…
This model consists of the elevator portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
The proposed model is a wall mount designed for the third-generation Echo Dot, an Alexa-enabled smart speaker. This wall
La leva Quad Lock è un dispositivo progettato per garantire una connessione sicura e stabile, frequentemente utilizzata in applicazioni di montaggio per smartphone e fotocamere. Creata con Fusion 360, la progettazione di questa leva…
Universal fire department elevator key. Category: Other
This is an European emergency door elevator triangle key, designed with a longer body to accommodate additional paneling and deeper keyholes from restoring old elevators. No supports needed. 100% infil. Tested works flawlessly.
During the 2020 lock-down the majority of my classes transitioned to online platforms. I found myself spending a significant amount of time working from my home desk. A clean and organized workspace has became crucial for my productivity…
As the name suggests, this is an elevator for marbles. The lift is constructed in such a way that it can be integrated into a marble lift from Hubelino. The plates are compatible for Hubelino and Duplo blocks. The knob is fixed by short…
Hubelino ist eine großartige Duplo-kompartible Murmelbahn. Dieses Ding ist ein Lift für Hubelino-Murmeln. Der Antrieb erfolgt mechanisch und universell über einen Ixolino-Akkuschrauber, wie er eigentlich in keinem Kinderhaushalt fehlen…
Modern phone holder that elevates your device and lets you charge while it’s docked Dimensions ⬝ mm ▪ Phone holder - x:70 ⬝ y:78 ⬝ z:90 Print ⬝ Profile ▪ 0.40mm nozzle ▪ 0.20mm layer height ▪ 15% gyroid infill ▪ Outer walls slowed for…
This is part two of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
Elevation Platform for Dungeons and Dragons or other TTRPGs. The platforms are in three different sizes 5, 10, and 15ft. The platform and posts are connected with a tight press fit. If the fit is too lose or tight scale the platform…
Doesnt need any hardware to work I added the steps if you need to adjust the tightness of the rail mounts or if you want to modify it for use with bolts Assembly: put the long flat bar with the two holes into the hollow picatinny rail,…
I haven't actually assembled this, so good luck on that part! The pieces labeled “DH” (Dowel Hole) have a 9mm hole through the middle so a dowel can be added for support and to connect the 4 pieces together.
I wanted something to elevate my MacBook Pro off the table so it could get a little airflow. I didn't really want to change the angle that much, just get it off the surface so it wouldn't get so warm. I made it so it clips in on each side…
This is the ULTIMATE Print in place design atm! It combines I3D’s Scissor jack platform with my Phone holder, and creates an amazing, assembly free, height adjustable, mechanical, semi-automatic, universal Phone holder! Please see the…
Make sure to like and follow and share your makes :) This display is based on the actual elevator in the audi museum in germany it will require assembly and gueling once printed unfortunetly but it will make a beautiful addition to your…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a modern, stylish, and elegant…
Update 6th of March the w.i.p. status has been removed from the stabilization system use two sticks and one clip (tight) to create a stabilization beam. The ML4 stabilizer ring is only applicable for the Motorized Lift v4 The ML4…
Parts: 4 Different versions are available: Lighthouse_Elevator_Hollow has a hollow central shaft Lighthouse_Elevator_Filled has a filled central shaft for greater structural support, and is more suitable for down-scaling Lighthouse Tower…
Výškově variabilní šnekový dopravník na kuličky k dráze kompatibilní s Lego Duplo. Výšku lze upravovat vkládáním nebo odebíráním mezikusů. Kostky jsou rozměrově kompatibilní s kostkami Lego duplo. Základnová šneková hřídel je se základnou…
Elevate your device experience with our Wire-Charging Phone & iPad Stand! This stand combines modern design with practical functionality, allowing you to charge your phone or iPad effortlessly while keeping them securely propped up. No…
Video of how it looks after being built: https://youtube.com/shorts/wvF8NSBeQ0s?feature=share This model requires minimal hardware: 2 bearings, 8mm ID x 22mm OD x 7mm tall 2 M4 screws, one 16mm long and the other 20mm long 2 M4 nuts…
Elevated stand for behringer xtouch mini MIDI controller. Because when its lying flat its not so comfortable to use. Two versions included - one with 27mm elevation, so my friends Keychron keyboard can fit underneath it. You can read…
Total height 8mm, shorter than the original
I saw the need for an elevator for my Kid's Hubelino marble system more than they did, but they liked it a lot in the end nontheless.. I had a cheap 12V geared motor with (CM-370-1260 w/ 10 RPM) still laying around from another project…
Es una llave para poder abrir la puerta exterior del ascensor. Esta llave es mas alargada que una llave normal.
With this parametric hoistway door release key you can unlock an elevator's hoistway doors in case of an emergency. Be careful: Usually there's nothing behind the door but a deep hole . Be sure to read some manual so you know what to do.…
XL Hamster Laufrad mit optionaler Erhöhung Hamsterlaufrad in 25cm Durchmesser. Mit der Verlängerung kann man das Rad auf den festen Boden stellen und dazwischen noch Streu packen, dann steht es stabiler und es sieht schöner aus.…
Handy support to elevate an object so that spray painting the edges turns out cleanly. They are a quick print and don't need supports. They are also stackable, so they store compactly. They are about an inch tall (~27mm), and can be…
This is a reinforced model of the LevAR tappet plate and an associated 3d scan of the original (cracked) tappet)
Here is a selection of 3 variants for an Echo Dot (4th Gen) stand. They are of slightly different heights (between 43 and 48mm tall) and the legs are of a similar tapered diameter. The tips of the legs contact the table at ~55mm diameter,…
I have two cats at the moment, Butters and an unnamed stray (who may end up being called Noname...pronounced No-NAH-Mee for maximum pretentiousness). They share a small elevated food bowl which I found on Amazon a while ago. Sadly, that…
"Marblevator Pick and Place, Version 4" is my fourth pick and place based Marblevator. This model utilizes four 3D printed TPU "fingers" to pick up a marble from the end of the track and place it at the start of the track. The fingers are…
The Marina Bay Street Circuit from Singapore to scale and with elevation. Also featuring indicators for DRS detection zones and the start/finish line. The model was made from scratch in onshape using data from the Formula 1 website. Edit:…
Kone elevator key used to enable various functions (elevator dependent) like "VIP Ride". Works fine on PLA. Use 0.1 mm layer height. May need small supports depending which side you print it. This model is part of a 3DLocksmith project…
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
This is part one of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
this is a model made using free, open-source software called TouchTerrain of the elevation of the Iberian peninsula (Spain, Portugal, Andorra, Gibraltar and some parts of France) hope you like it :) Also if you want to you can scale it…
This stand allows you to friction fit your MagSafe charger. It provides infinite position tilt adjustment while remaining sturdy enough not to droop when the phone is placed on, nor move when the phone is removed (when printed at 100%…
A minimalist and elegant tray designed to let wet items dry efficiently — whether it’s a bar of soap, an oil bottle, a kitchen sponge, or a safety razor. The tray features a sleek rectangular shape with rounded corners and a series of…
A spinning version of the cross/boomerang sub-weapon in the Netflix Castlevania show. The blades rotate, emulating the impossible movement seen in the show (no really the secondary set of blades appears out of thin air when all 4 blades…
This is a 3D elevation map of a race track called Nordschleife displayed on a base. I recommend printing the race track in a higher resolution so you can see the elevation without abrupt layer lines.
Lever for Shut Off Valve 1/2 inch - On/Off Faucets with Garden Hose Outlet - Leva rubinetto da 1/2 pollice Ball Valve Handle Shut Off Switch Handle Replacement Resize/Scale to adjust dimension If you download/enjoyed this file, I always…
The DF64 gen 2 wave washer is lose from the midle of the filter section cause the wave washer is too thin. this ring should be added under the wave washer. the modell is 1mm think, you should adjust the thickness by scaling the z based on…
This is a print-in-place foldable, collapsible tenting stand for the ZSA Moonlander keyboard. It has a tenting angle range of 32–45º, stays attached to the keyboard, and can easily be collapsed flat without disassembly for travel or…
With these files you can print one or more Subway train cars, inspired by the Chicago elevated transit system. The cars are not motorized and thought as a toy. Multiple cars can be coupled together to a train. Every part can be printed in…
Soportes de elevacion de puente en diferentes alturas y con angulo, para pistas Scalextric Digital. El mismo soporte vale para la subida y la bajada dándole la vuelta :) Comentarios bienvenidos, si los utilizas en tu circuito, pon alguna…
F1 circuit Autodromo Hermanos Rodriguez Mexico City - with elevation, with data taken from f1.com (circuit shape and elevation points). Can be printed as it is or scaled to desired size.
A simple tool to block elevator doors for maintenance. PETG 0,3mm 100% infill recommended
I had to glue and repair the crank handle a couple of times before, even added a screw to hold it together, but now it was time to replace the whole part. The screw moves easy and runs perfect. Be careful to click in the tip, in order not…
3D Printed Mouse Pad: A Personalized Gaming Experience Elevate Your Gaming Setup with a 3D Printed Mouse Pad Dimension : 250 mm x 300 mm Tired of the same old, generic mouse pads? Experience the future of gaming with a 3D printed mouse…
Really like the original design by Alley Cat What I was missing - it's the heartbeat LED. Also, for my taste, USR button (bigger one) was too flush with case, so it was a little hard to press. Added a Little tactile bump on it. I added a…
Flying PC/NPC indicator with platforms for 28mm sized D&D/Pathfinder/RPG. The indicator is 2" tall and marked from 10-100ft in 5 ft increments using a small rubber band. Optional 2- and 4-inch platforms are designed to support larger…
! Yetkisiz Kişilerin Kullanması Yasaktır.! Hatalı kullanım tehlike yaratır. !
This is a model of the chain whip from castlevania. It scales decently with 6 inch figures but I wouldn't force it into any figure's hands. It should print with supports and work perfectly. The file labelled “optimised” is at an angle to…
Chain for motorized elevator of TOTO Toys OEMed (e.g. Mindware) marble run set. The chain fits well with original chains. It helps the elevator more higher and longer run time of the marble.
this is a hopefully better elevate
F1 circuit Sao Paulo Grand Prix Interlagos Autodromo Jose Carlos Brazil - with elevation, start line and DRS detectin zones. Data (elevation and circuit shape are taken from f1.com). Can be printed with small supports on DRS and start…
Discover exquisite Butterfly Floral 3D Printable Wall Art designs to elevate your home decor. Meticulously crafted, these designs add natural beauty and elegance to any space. With customizable options, bring these creations to life in…
I wanted to crate a diorama of a scene from a book I had read, which largely involved an elevator. assembly for this is simple, just attach the bottom section (the one with springs) to one end of one of the boards (you can use hot glue…
Questo adattatore che non è fornito come si vede nella foto perché inserito nella leva vi da la possibilità di recuperare tutto. per Peugeot 206 ma modificabile diametro interno per Peugeot 106 o Citroen
![#0055 Elevated Stand for Echo Dot 4th Gen (or succulent planter) [3 Variants]](https://media.printables.com/media/prints/394576/images/3294024_2f4ebeba-3070-49ee-a0aa-5f0794713850/20230209_202927.jpg)
![AlleyCat's Heltec T114 Pocket GPS Case [LED cutouts] [elevated user button]](https://media.printables.com/media/prints/241b2d97-8a0c-4c49-a520-2b100dfde4a5/images/10987558_e96b11b5-9647-4d9d-b112-74706dba54b9_1dc5c545-eb88-4bf0-8a4a-0228ad898e03/pxl_20251024_072036621portraitoriginal.jpg)
