3,097 models
A 3 X 3 grid of 1 layer high squares for checking that the bed is level. To be used when performing Bed Level Correction as described in https://help.prusa3d.com/en/article/bed-level-correction_2267 . Print instructions PrusaSlicer's…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
A simple bed-level test to make sure that your printer is leveled correctly !!only print one layer!!
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required…
Version 2 now available! Featuring thicker arms! Released along side the original HomeGrown3D newsletter! HomeGrown3D.com Read our article about the version 2 clips:…
When 3D printing, it is crucial to have a level print bed to ensure proper adhesion of the printed object. If the bed is not level, the print may fail to adhere properly and can potentially peel up during the printing process. To check if…
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
I simply took the STL file from the Prusa Knowledge Base and reworked it to fit the print bed size of the Prusa Mini. https://help.prusa3d.com/en/article/bed-level-correction_2267 Important Information about sheet markings FAQ Sheet…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
A quick bed levelling test print for the Ender 3 V3 SE that prints over the locations that the probe measures to level the bed. Follow these steps for the best results: Level your bed using the auto leveling feature. Print this test.…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
See also 1:64 stackable sea container (works well with HotWheels) My other printables for 1:64 display I've also created more models that you can be stacked horizontally as well as vertically. Below is a preview of the display shelf you…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
I remixed the original design to fit the Prusa mini
Yes, this is just a big flat square, but it is very important for making sure the bed is level, the z steps distance between the nozzle and bed is correct and whether flow or extrusion is at the accurate level. Bed Level - start printing…
Update 01/07/24 (07/01/24 for the rest of the world): “Wrench” model fixed to have looser tolerances so that there isn't any issues fitting over the knobs. K1 Max SCREWS_TILT_CALCULATE config added, screw locations courtesy of…
Locking bed leveling knob for the ender 3 s1/s1 pro. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give…
This bed level test measures 185mm x 185mm x 0.4mm thick. Check and adjust you bed level before printing actual parts. Using this to set your bed will ensure maximum adhesion. The thickness is 0.4mm, which will translate to 2 layers at…
The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic CHANGELOG 18.02.2023 fixed the model size and changed the file name to “BIQU_BX_BED_LEVEL_TEST_220x220.stl” - thanks for the hint @kord2003
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
This is a parametric first layer test print generator inspired by Jeff Jordan's "Life Adjust" print. The generator is written in OpenSCAD and the source code is included. You can customize: The number of rows and columns to be printed.…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…
A quick Bed Leveling test. Adjust bed knobs according to the final results or adjust live. Final height of the print should be one layer tall comprising of a 0.2 mm layer height. I have included cad files but I don't think you'll really…
Eine Form zum testen oder ausrichten des Bed-levelings.
Designed for the big bed of 4 Plus 320x320 with 9 connected areas. With 1 or 3 layers at 0,2 layer height
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
A simple single layer square grid to test bed leveling across the area of the bed. My bed level sensor was doing strange things so I needed a test to confirm the consistent inconsistency. Watching a single extrusion line go down is works…
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
Print this to level your bed. Make sure that the bed is cleaned with isopropyl alcohol and has no fingerprints on it. This is one of the larger bed leveling prints which means that more detail will be shown. Use the leveling knobs under…
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
Created this so i had an exact fit with exactly .2m height on my Elegoo Neptune 4 Pro. Prusacliecer 3mf attached.
Very quick and easy bed leveling test. The squares are 20mm each placed on every corner and middle of the bed.
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
Everything you need in order to level your bed and calculate your zoffset. Video: https://youtu.be/_OnCugt-ESU
This is a recreation of https://www.prusaprinters.org/prints/36706-bed-level-test . I didn't like their instructions and the dimensions of the model, so I made my own. Print instructions Select the STL based on your desired layer height.
Update Aug 20 2025 In response to comments about the fit of the threads I am now including renders with increased thread tolerance gap. You can also make custom adjustments to the fit by editing the value of the ThreadToleranceGap…
I just got the new Ender 3 V3 SE, and out of the box the auto bed leveling on my printer did not completely work properly so I whipped up this file for manually setting the values. To use, just run the auto bed leveling to get a start…
This is a bed level test so you can fully calibrate your printer to make nicer prints. This helps beginners alot and the lines all around ensure every part of the bed is level. It might take longer than other designs however it is…
This model is a specially designed X Carriage Leveling Support for Elegoo Neptune 4 Pro 3D printers. It is crafted with the purpose of ensuring accurate leveling on the Z-axis. Mounted under the X-axis carriage, this support provides…
This is a level holder for the milwaukee packout. I designed this to fit a Milwaukee level, 4' and up. The width and height dimensions it is based off of is 1.4" x 2.75" plus 1mm clearance on all sides. (some levels have a 3" dimension…
Info: inspired by great gyroscopic model from @phi.gl for stroller, I wanted to have it in the car :) Thanks for originil print! I used this ventilation connector shape from print by @icepick Designs (thank you too) I designed car vent…
The extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
The frame has recessed holes for mounting. Faces will pressure fit in. Use the spacer file to help keep each plaque aligned as you install (gap is 10mm) Use your splicer to add a colour brake for the faces. Each plaque is 120mm x 120mm x…
I noticed that left front corner of the bed was by ca. 0.8mm lower than the right corner. Since the bed levels mechanically against the bottom of the printer, there is an easy solution. :) How do you figure it out if the bed is lower on…
Simple bed level test - 5 x 5 grid of 25x25mm squares layed out in the shape of the Prusa MK3 Printbed.
This is an all-in-one 3D printer test involving bed level test and 3D Printer Test by @dc132. The Bed Level Test involves simple and complex moves that test the adhesion quality of your bed, your initial layer print speed and flow rate,…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
This is a real test of the accuracy of your printer. Most tests have a gap range of .15 mm (.0059") to .50 mm (.0197"). That's a wide range and it's targeted for a wide array of printers. With advancements in printer and slicer technology…
Ender 3/ pro bed leveling test
Used for testing bed level. After noticing defects in the first layer using PETG, this is a helpful guide to achieve smoother results. I suggest sizing down by 50% or even 35% to speed things up. Level bed with the knobs Re-Calibrate Z-…
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
Bed Level Correction Calibration Model for the Prusa Mk3/S. Instructions how to calibrate, see: https://help.prusa3d.com/article/TPGip0OmaP-bed-level-correction
This is a counter for board games. It has a geneva wheel so that the tens only increase/decrease for every full revolution of the ones. No painting is required as the number wheels are printed with a color change. It comes with a blank…
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
This is the test file for bed levelling with the minimum weight height of the model is 0.4mm width of each ring also 0.4mm. Weight is 0.3 grams.
Video Assembly Hold all 3 parts together then start rotating the grip/ring to screw them into each other. Use a little grease for the threads to lower friction. Optional put rubber/ non-slip or adhesive at top/bottom to hold securely in…
Updated 04.13.2023 I've added a .stl file for the X1C that avoids the extra purge line in the rear left corner of the machine. You'll need to run the print without the automated flow calibration. Use a known calibrated filament profile…
This is the top 100% recommended for everyone to use on their 3D printer it only takes a couple minutes to have it perfectly and completely locked in very nicely and it is a very handy 3D printer part. An absolute go to for any Ender3…
I like to start each day with a fresh cup of coffee and my personal Bed Level Test. That ensures a great morning and perfect prints every time! The test printed with red filament is ideal. The extrusion lines are connected and cohesive.…
I was struggling with my bed gantry being not level, and the Anycubic wiki wanted me to adjust the belt and leadscrews, but that was too much work for the fine adjustment I wanted to make, so I made these little spacers to go between the…
A quick test for adjusting your Z-Probe Offset while printing with the SV06, it draws the skirt right next to the purge line, check this in your .gcode file with your slicer beforehand. You can adjust your Z-Probe Offset while printing…
Summary Designed to fit over the Z-stepper mounting bolts in the base of the print chamber (see photo). The model is a single piece. Print two of them. Discussion When doing a platform calibration, the printer will bring the print bed to…
These spacers are to help get the bed of the Ender 3 V3 KE (and SE) as flat as possible. These also have the spacer height on the OD to make it easier to identify if you print more than one or two. The 13mm spacer is used both in the…
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
A simple notched wege to stabilize shaky furniture, you push it gently (notches facing down) under the corner that needs leveling and break it once you get to the desired thickness. Print Settings Printer Brand: XYZprinting Printer: da…
A helpful tool to get the gantry aligned in a dual-Z configuration. Put printed tools on both sides of the gantry Disable steppers Move hotend to the middle of the printing area to avoid collision Manually, simultanously rotate both Z…
This is an old model I made and used for several pieces of furniture. It screws to the bottom of the leg or furniture to hold an M8 nut. An alternative design is to drill into wood to fit and hold the nut:…
Precision Horizontal Level Key chain This is a high precision alternative to spirit level. It's small, compact and can be attached to your key chain. The level requires a 7mm steel ball bearing. If you built the Prusa printer yourself,…
The underside of the platform feet isn’t perfectly flat, so the bed never references a true plane and dual-Z drift makes it worse. These blocks give a flat, rigid reference, so the platform squares quickly and stays consistent. They can…
Problem: Especially after printing at higher speeds, I slowly noticed that the leveling was getting worse and worse. Of course, this could be quickly fixed with ABL, but it still felt not right. Solution: I search for possibilities, also…
In certain cases, you may need to manually level the print bed of the Snapmaker U1. Fortunately, this is done via the firmware on the display. You need to turn a knob at each of the four corners under the bed, following the instructions.…
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
This is an alternate version of my Ender 3 Pro level test ( https://www.thingiverse.com/thing:4810127 ) intended for a 400x400 build plate size like on the Anycubic Chiron I use. It's a recreation of the default bed leveling test the…
Level Wind (Diamond Screw) Saw this the other day on a filament respooler model and HAD to model it up and try to print one; such a cool concept. The level wind (diamond screw) allows you to rotate a rod in a single direction, yet the…
This is a quick 5x5 Bed Leveling Test that I've made for AnkerMake M5. Each cell is enumerated to ensure you have a proper chart. The cells are made to 0.20mm thickness, and the enumeration is 0.50mm. You can measure the cell, letters, or…
The main idea is to manage not to make you solve the puzzle. On the sides of the cube there are small windows, from which you can glimpse the marble, but this shouldn't help you too much... if you manage to solve it one day, you will have…
Leg levelers for IKEA Lack table or anything with a 50mm square leg. I printed them at .30 layer height with petg and they work fine. They provide a maximum adjustment of 10-11 mm per leg. I have also included a wrench to help with the…
I made a quick remix of Robagon's excellent bush model because I wanted to have more points in the top layer so that models could stand on it more easily. So, I used the same tricks that I used when making the JotL Destruction tokens to…
It is for 1st leyer bed leveling testing, calibration test of any printer
