3,533 models
Zum deutschen Originaltext gehts nach unten! -------------------------------------------------------- Push your MMU3 on the next level! You have an original Prusa MMU3? THIS is your musthave! Do you have an MMU but you are annoyed by the…
UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…
This is how it works: Numerous modifications have been made to achieve a higher chance of a rolled Six. First, the side opposite the Six (One) is fully filled and therefore heavier than the other side. Second, the edges on the One side…
N-Scale 12" diameter hollow pipe load. Actual print size is 17.2mm x 17.2mm x 96mm, which scales out to 9'H x 9'W x 50'L. Print instructions The hollow, thin-walled pipes were designed for a 0.25mm nozzle and 0.10mm layer heights.
The objective of this build was to explore and understand trigger mechanisms. In particular, how to achieve a light but reliable lock mechanism and one that re-cocks both the trigger and the bolt in one motion, so that a true ‘lock &…
This spring-loaded gift box closes using an irising mechanism. Perfect for giving gift cards, candy, or other 3D prints to your loved ones around the holidays. I used this model this year to make giving gift cards a bit more fun. Though I…
Remix of zbigmik coal load scaled to fit into Accurail 7500 Series 70-Ton Offset Side Triple Hopper.
Adorable little bunny magnets that are easy and quick to print and a great way to make neodymium magnets cute. The little ears provide some grip to lift the bunnies off the fridge in a humane way. Finally tried to pause at layer in a…
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Purpose I wanted to create an easy-to-use, compact and portable third hand or mini vise to use when soldering small wires on my electronics and also when working in my car. This can sit on a table lying flat or stand vertically - what…
Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…
Show off your Pokémon cards in style with our Toploader Card Stand! Perfect for displaying your favorite graded or sleeved cards securely. Download and print your own stand today! Additionally, the logo can be printed separately without…
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Printed in PTEG, Prusaslicer; 40% infill, full supports, 245C
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…
Want to add some extra excitement to your board games? Well, here you go: a Dice Tower with a spring loaded Trapdoor! This is a very simple print, and all you need is a printer, a 4mm(ish) pen spring, and a 20-25mm M3 bolt. The bolt is…
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
I made this double-digit counter for keeping track of my life when playing commander, but it can of course be used for other purposes. The counter consists of two wheels with the digits 0-9. Each wheel is paired with a spring that locks…
Old design, there is a new design made, Youll find it here . Changes made in new design, they now can be placed snug together side by side, and hence can hold overlapping gridfinity bins. This one is left here for compatibility reasons.…
Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…
I have arthritis that makes it hart to load these clips. I made this loader larger than most would as it is more comfortable in my hand that way. It is for my Beretta 96 Vortec but it should work on any Beretta 96 as the 96 are all 40cal…
Designed and printed in less than 1 hour, to help load the coffee into the small Bialetti 1Cup basket, works great! Printed in PLA Galaxy Black If anyone needs 2/3/4/5/6 cups size, just send me the exact internal diameter of the funnel…
Speedloader for the 9mm magazine for the Keltec PF9. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print it upright with a 10mm…
UPDATE*** 12.08.2026 - Fixed wrong information - Corrected grammatical errors Okay my Boiz, that here is my Magnum Opus! As many of you know, I have a deep passion for Airsoft Shotguns and thus, our beloved APS-Shells. I really wanted to…
Door hook to fit wooden doors and hang light loads, doesn't require nails or glue. The profile part of the door where the hook is attached is around 18mm thick.
Minimalist reloading tray for holding .45 ACP rounds. Based on the 9mm design I found here https://www.printables.com/model/218307-9mm-reloading-tray-25-count but I simply needed a .45 ACP version so I created this one from scratch. Easy…
Reloading tray for .338 Laupa Magnum. Fits also for smaller caliber.
EN: Place the funnel on top of the PTFE tube and you will find it easier to load the filament into your Prusa MINI+ printer. Funnel can be printed without using supports. CZ: Trychtýř nasaďte na začátek PTFE trubičky a hned se vám bude…
.3mf files were sliced in Prusa Slicer for a MK4S, so you may have to adjust settings as needed. .25mm Structural standard settings Gyroid infill pattern at 15% HF 0.4 Nozzle 230/225 Nozzle temp 60 Bed temp There is a color change for the…
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
These T-Nuts print on their side. Slip an M3 nut into the recess and you are ready. The best way to fit the T-nut into the extrusion is to thread a long bolt into the T-Nut and wedge the nut into place. Once in the channel the T-Nut…
This allows the quick reload of magazines for S&W Model 41 magazines. Just keep the arrow pointed forward so it will catch the follower block. Enjoy. I used a paint pen to color the arrow to make it easier to see. Have a lot of friends…
A short grip for your APS CAM870 A short grip for your APS CAM870. There are 2 versions. Both are available with and without threaded inserts. “Integrated Loop” - Allowes you to use a simple fabric sling adapter. “APS Sling Loop” - Uses…
A spacer to convert the AEG Handguard to fit your GBB it will also fit the shorter Handguard variants. It also includes barrel braces, just in case your G3 ever developes “barrel wobble”. Use M5 Grub screws for Part 2 & 3. Print…
A tracer carrier for your KWA M11A1.A tracer carrier for your KWA M11A1. Uses Standard AceTech Tracer Unit. Only place supports like this:
A tool to help you loosen the backplate of the all too heavily glued VFC Boltcarriers. Will fit HK53/PSG1 as well. This tool is meant to help you, get the backplate loose. Do not over tighten using this tool!!!!
this is a sleek black cat that you can print for your home and you can rescale it
A simple follower design. Use it as a spare part, or to change the color of the follower to be more visible in use. The model is already oriented for optimal printing, resist your urge to turn it around.
Gcodes für Ender 3 mit Direct Drive.
A tool to help you loosen the backplate of the all too heavily glued VFC MP5 Boltcarriers. Will also fit G3A3/PSG1/HK53. You will need two bolts: M3 x 25mm This tool is meant to help you, get the backplate loose. Do not over tighten using…
Just trying to make a propane truck load that can be easily attached to a vehicle without having to alter vehicle. I used Gorilla glue to attach them.
Supports needed for the overhang - don't print flat side down or the swivel joint won't work. I used PLA, but most any material should work. If you like this design, consider checking out my Etsy shop for more cool prints. Use this link…
Model of the right action bar of the Maruzen M870. Just in case yours breaks. It is normally meant to be cnc'd or printed in metal, but as I had surprisingly good results, just printing it in PETG, I will share my print file as well. But…
this model of storage is for this speed loader Fx Impact 34 shot .177 Speedloader by puna102 on Thingiverse: https://www.thingiverse.com/thing:6097819 This discussion centers on a custom-designed case that I created, which is compatible…
this speed loader model is for this one please see attachment the link for it created by Thingiverse user benny6 https://www.thingiverse.com/thing:5463950 This discussion centers on a custom-designed case that I created, which is…
Sticks from the canopy get used pretty quickly and fall through the holes. This little print helps to prevent it. You need: 4x M3 14mm 4x m3 nuts On the photos the nut hole is bigger, i've made it smaller later. Prints without support.
Smash! If you like my models, please like, share, download, make and all the amazing good stuff! Most Dice Towers are awesome additions to your board game experience. But it doesn't make rolling the dice any easier. If anything, it makes…
Toilet paper version here ( Exclusive model for members ): https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r A paper towel holder with a print in place mechanism and quick release and load…
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
The 🥰 BoxTurtle's 4-in-1 hub can be a bit “ temperamental” 😖 when loading filament in certain situations (especially on lane 4 ) with the filament getting caught and stuck in the bearing recess at the end of the filament path. There is…
Hello everyone. This is another take on mounting both the spool holder and filament sensor on the side of the Creality K1. To assemble the sensor and PFTE fitting on the bracket the stock screws can be used. Do not tighten them too mutch.…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…
UPDATE 5/17/20 I have completed 2,3,4 of the updates i thought would be good. If someone could please**try it and let me know how it works with the bottom ribs I would be forever in your debt I have printed several of the speedloaders on…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
This print-in-place paper towel holder allows you to change the roll quickly and one-handed. Printing and mounting Print the two holders with the sides facing the build plate. Supports are not required. Break the hinges loose and move…
I've been playing too much Call of Duty lately and decided to make a print in place “quick-reload” paper towel holder. Largest paper towel I've tested is Costco's 6" diameter paper towels. Installation notes: When determining the spacing…
This is my Print in place spring loaded box design! No supports, no assembly, just print and use! See it in action here: https://youtu.be/IrT1DaSBeQ4 All clearances are 0.3mm or greater, so most household 3d-printers should have no…
This is a 3d printable AK magazine speed loader for AK magazines in 7,62 and 5,45. It was inspired by the podavach U-Loader with the goal to make it 3d printable on a standard 3d printer. It gives you the ability to load AK mags at least…
Looking for an attractive and flexible storage system to organize and protect your trading cards? Don't banish your hard sought collectibles to flimsy generic cardboard boxes in the back of your closet, store them in style in these…
This is a 3D-printed RC wheel loader built using standard electronic components such as H-bridges, buck converters, and an ESP32. There is a full Length YT video below which goes over everything it can do "Such as being able to swap…
https://www.youtube.com/shorts/nvIDWYT1Sxo *edit 03.25.23 added a 150% scale version *edit 04.14.22 added high-poly egg with magnet lock (fits 3x1mm, add a drop of glue) I have completely redesigned the old Surprise Egg #3 - Tiny Wheel…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Print-in-place and Articulated Surprise Egg #3 - Tiny Wheel Loader 'Making of' video: https://youtu.be/1pnJB7RGQEE Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the wheel loader and the egg was each…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
Keyrings available here: https://s.click.aliexpress.com/e/_DmRrLOZ
this isn't mine and this is my first reupload so if I have broken rules or etiquette please let me know :) I just wanted to reshare to get the hang of it and honor this great print that I'm yet to print in marble sadly. everything is the…
Hi Everyone! We are LEAF1 - an F1 in schools team who were crowned 2024 UK Champions, and competed at the world finals in Saudi Arabia, where we placed 5th. This account is run by the lead engineer - Zac. It's part of our open-source…
Will write description later, too tired, but wanted to get this all out there for everyone to use. (you'll have to print “FrontLoader_TopCover” twice) You can find the lid here: https://www.printables.com/model/110082-nes-frontloader-lid…
Notice! This is only compatible with original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the newer style of AMS feeding funnel that has a thicker press button.…
Start your own drone delivery service and deliver cargo/payloads with your DJI Mini 2 , DJI Mini SE , or Mavic Mini ! Everything is fully 3D printable without supports, you just need some string or a wire. Both the mount and the landing…
Unfortunately, K1Max do not have same fixation point on lateral panel to be able to use the original spool holder from MDFPereira @MDFPereira_263523 So i adapt the spool holder to my K1MAX. The PTFE have to be remove from the external…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Improved version for faster prints, only needs supports for the center plunger. 17/L,19/x,26,34,45 also works with P320/P229
History This part is actually a redesign of a surplus part to my magic strap buckle: https://www.prusaprinters.org/prints/84848-magic-strap-buckle-magnetic I got some feedback from a user that was very happy with the buckle, but had…
I needed something to keep the door shut on the package drop box so I designed this spring loaded slide bolt catch that Prints-In-Place as a single assembly. It's spring loaded so it automatically latches when you close the door. I…
Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…
Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏 Differences from the original: Added clearance for rounds Added captive guides to the pusher to keep it engaged Rotated viewing slots to allow…
Hey everyone, Bear here! I was never really satisfied with the flimsy case my hex bit set came in, so I took matters into my own hands and designed my own! What started as a simple storage solution evolved into a fun, fully 3D-printable,…
Glock 9mm double stack magazine speed loader - 2 Versions. One has more rounded sides on the top end. I printed these with 100% infill and they are very sturdy. These have less slack around the magazine than some of the other models I…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
Details I had mounted my GoPro to my helmet to shoot outdoor action movies. I love the original GoPro cameras for their great stabilization features, but they do come at a price. So who wants to see a costly camera banging on the ground,…
The QuickDraw Sleeve & Toploader Dispenser is a premium storage solution specifically designed for efficient organization and dispensing of your trading card sleeves and toploaders. Its innovative design enables hassle-free storage and…
Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.
I didn't want to make 4 differents projects for parts I don't know, if they will print fine. So here you have fixed models from the game, the raider-style power armor, X01, T51 and the T60 - all posed like in the loading-screens. I hope…
All, this is not a remix of another's but was purely inspired from an online video short. Please go to https://www.printables.com/model/590620-brain-teaser-54-pcs-puzzle first before downloading this model. Her posting came before mine,…
This is the working cannon , with an added autoloading mechanism. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need. Print it as a toy for your kids or present it to…
A rip from skyrim, the loading screen in which alduin sits on a wall.
Was looking for speed loaders with a better one handed grip and decided to make one for 9mm and 45 ACP Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament:…
This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I use the accelerator and brake almost daily for a little over a month as of the original posting - the…
Reuploaded for contest: Backpack Boosters. Inspired by Heroclip by GearAid https://www.gearaid.com/pages/heroclip this hybrid gear clip allows bags, backpacks or jackets by hung on places, where they otherwise wouldn't. About 60 cm (2'…
Skid-steer loader (Easy print - NO SUPPORTS) for some parts like seat, body, cage and axis caps use glue Print settings 0,2mm layer 3 walls (for axis use 5 walls) 15% infill (for axis and inner part of wheels use 50% infill) for long axis…
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
