Maj / LtCol / LCdr / Cdr rank Insignia
Rank insignia STL for US military officers O4-O5.
- Downloads
- 382
- Likes
- 10
- Rating
- 0
88 models
Rank insignia STL for US military officers O4-O5.
Multimeter Halter Voltcraft VC130 IKEA Skadis
I used the parametric Rugged Box from Whity to create this. I placed the logo model in the lid file for easy alignment. The logo is 0.2mm thick so it is only one layer high. the lid has an indentation for the Logo. If you don't have a…
This model is a beltclip for the Poké Ball from "kriswillcode" https://www.printables.com/de/model/166243-pokemon-poke-ball The hooks on each side could be used for a rubberband or similar as a secondary safety. 2 Parts: Beltclip…
Two Sided Crypto Keychains BTC - Bitcoin ETH - Ethereum BNB - Binance XRP - Ripple DOGE - Doge Coin LTC - Litecoin + some Bonus Glass Stands ;) How to use Layer Change to make colored Keychains / Prints in PrusaSlicer How to ADD any Text…
Updated V2 with improved stability Material: Prusa PC Blend, Polycarbonate Infill: 100% Support: No Rafts: Yes 15mm outside only
modeled from scratch, but highly inspired by https://www.printables.com/model/361590-multimeter-halter-voltcraft-ikea-skadis - so all credits to him. Since this is my first upload, I hope the category is the correct one. I printed the…
Original box is some kind of genious. I cannot work with F3D, so I used TinkerCad to fit this nice box to my Multimeter Voltcraft No91. I added the Voltcraft logo and printed it on my MK3s with MMU2s. You can also print it without MMU,…
Custom boltcatch for M4/M16 airsofts :) Custom magazine lever: https://www.thingiverse.com/thing:2886262 Custom forward assists: https://www.thingiverse.com/thing:2886570 https://www.thingiverse.com/thing:2886571 Outer barrel cover:…
DC-DC LTC3780 module DIN rail mount Mount of excellent DC-DC sepic converter Compatibility: DC-DC LTC3780 35mm DIN rail Mounting components: M3 screws M3 stand Thanks to Joël P for making a LTC3780 model. If there are any licensing…
configurations in .f3d file Hold power Belt thickness Belt width Text letters (in extruded sketch) Text on/off Hole features on clip on/off includes step file for easy editing The snapfit can be “snappy” if configured right. the base file…
Hi, Since I had a lot of play in my Toolheads after a few toolchanges, I was wondering why. After checking I saw that the glue of the pins was very flexible and I did not like the glued version at all. I was wondering why nobody had the…
because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while. had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the…
Dies ist ein Case für ein Multimeter VC155 des Herstellers Voltcraft. Es bietet Platz für das Multimeter selbst, den Temperaturfühler (unter dem Multimeter) sowie diverse Kabel, Ersatzbatterien, etc. Als zus. Hardware werden benötigt: 2 x…
A basic belt clip for the Beats Fit Pro earbuds case. Wanted something similar to my pager belt clip from 1998. I used the model from 10000ukuleles on Thingiverse for the basic fit. https://www.thingiverse.com/thing:5179759
This is a LTC3780 DC-DC Converter PCB SELF-ADHESIVE MOUNT. KaosuNeko , thank you very much for the orignal design!
A remix of the parametric tool box by Yanev. Fits a Voltcraft MT-52 or similiar multimeter including accessories - divided by a small wall in the bottom piece. Logo is added as shallow extrusion. This lets you select it in Bambu Studio…
I created this probe holder for my Voltcraft Multimeter VC 830. But it should fit all Voltcraft Multimeters with an infrared interface. There are some UNI-T Mulitmeters that looks exactly like the voltcraft ones - so this holder may fit…
An earring in the 3 dimensional form of a boltcutter. In the second image the glitter on the backside from PHY printbed is visible. Maybe you want to have a look at the other models of this series:…
This is a stand for almost all Voltcraft multimeters
make sure to print with lots of support, try to not support the part that clips in, this adds a lot of material to remove after and can make the fit a little too tight
Heavily inspired by @Quesabyte 's design. https://www.printables.com/model/570584-pokemon-go-plus-belt-clip I wear this on my wrist attached to my watch strap though and it would fall out of the clip when I bump my arm. I built this model…
This is a vertical pocket that attaches to a belt and holds the Apple Vision Pro Battery. The holder can slide on and off the clip or it can be glued into place. Print the Clip on its side with a Raft and Support to give the most strength…
Beltclip for Zepro Truck taillift remotes designed to be printed in TPU Designed this to replace the originals that are expensive and break very often, been using this for the last 2 years at the company i work for on around 70 remotes…
Benin Saltcellar. Saltcellars from the Kingdom of Benin, particularly those produced under the authority of the Oba (king), are exquisite examples of Afro-Portuguese ivory carvings from the 16th century. These objects represent a…
Carved Ivory SaltCellar with lid.
Recently a friend of mine linked me the original model that i remixed this from as i did not have a bench power supply, and do not really have the cash for buying a proper one, so i decided to do this as my first “big” electronics/3d…
A simple beltclip for Firework Bullets for Silvester. Perfect for a 6 shot 6mm signal gun with 15mm expansion. Prints in ~2h without support with a 0.6 / 0.8 Nozzle. Print it now!
I wanted a case for this boost converter: https://a.co/d/hFepbhh Didn't find one, so I made one. Very simple, <30 minute print on Bambu X1C printed in PLA. I used 0.2mm layer height, 10% gyroid infill, 2 walls; but I'm sure any normal…
Držák na stůl pro multimetry Voltcraft LCR4080, VC830 a podobné
Hello everyone, there is a new fun mini toy car … Why a toy car? Because children like toy cars. And we love 3D printing. By tilting to the sides it can turn !! It's a lot of fun and learning. A mechanism similar to that of a skateboard.…
An addon base to fit a boost converter to power the fans in a BentoBox. Has slots for a power switch and a barrel jack. Supports 4x2mm magnets, like on the original BentoBox. This was made to fit in a Bambu Labs P1S using the inner 5V…
At the moment the clip quattro v3 works but is too big to fit in the charger and needs some tweeking. The clip quattro final fits in the charger and should work, although not perfectly. Replacement for the standart beltclip. Uses the pin…
V3-Beltdiameter is 6mm for overlapping V4-rounded corners Build for 40mm x 3mm belt like most Tactical Belts on Aliexpress I use it for my Ares Amoeba CCR Airsoftgun, even jumping and running hold it in place.
Beltclip with basic toolplate. You can attach tools or bags to this clip and easely de- and reattach it to your belt. I printed it in PETG for strength, but PLA will do, better is ABS. Total printtime was about 16h, infill 50%
Here is a small beltclip for the UniCutter (a small, refillable cutter for e.g. balloon professionals). You just need to print the two lids from the UniCutter and this beltclip and you are ready to withstand any balloon line working job.…
I build a gridfinity bin for my vc175 se to hold it within my electronics Ikea 22l gridfinity box. I wanted that it is stackable because I use different colors for different bins to know what type is used in within the box. I could also…
Custom inserts i made for the 6x7x15 storage box by pred to fit everything i need for Voltcraft VC-870 and VC-523, plus everything needed to use them. Included are: Main “bins” for holding the two Multi-meters also have space for their…
Installation can be done after Thightening the Belts. Slot for Cabletie is there but i think not needed. CHECK Z HEIGHT OF your Printer.
I’m looking for a Skådis holder for a larger multimeter like the Voltcraft AT-400 or one of the same size. I want to make sure it works while it’s mounted. I also need two probe holders to keep the probes in place. Print an extra Skadis/…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Belt Loop for Keys for you. The ideal solution when you don't have pockets but need somewhere to put your keys. One part of the loop can be put behind your pants or…
Needed an insert for my Knipex 71 02 200 Boltcutter Size: 6x1 standard gridfinity
This thing holds a 5 mm LED to the optical transmitter of our Voltcraft VC850 digital multimeter. It should be compatible with VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960. It might even work for the corresponding UNI-T DMMs. I…
Simple case for a rather popular LTC3780-based board from Aliexpress e.g. this one: https://aliexpress.com/item/1005009222609081.html It features a place for a 4cm fan in the lid, though you might need a separate power source to feed it,…
I usually store my belts rolled up in a drawer or on the sideboard. However, rolled-up belts tend to unroll, eventually leading to a mess. This clip is my solution to the problem. It keeps my belts neatly rolled up, making them easy to…
I didnt want do switch the front extrusion to 2040, so i instead did some simple modifications to an piece of aluminium angle. I used a pice of scrap that now is 20X23mm and 3mm thick. If you order a piece i redommend 25x25x3mm. For my…
I is easy to fit to your belt and pendrive by editing the user parameters in the Fusion modell.
I got tired of losing bolts from my mini-adder when the plastic fletching would break off so I whipped this up in tinkerCAD. Best printed in PETG but PLA will work too. Print with at least 6 walls and orient infill 0/90° to length of…
Made for my stepfather's vintage Harley-Davidson 1985 full dress touring classic FLTC. This gasket sits in a side panel that goes around the oil filler tube, and keeps the tube from damaging the fiberglass bodywork. He was looking for…
Holder for oscilloscope of one of the following model series: Voltcraft DSO-6000 Series OWON XDS3000 Series
Bei meinem Conrad Voltcraft VC 140 Multimeter hat sich irgendwann mal das Plastik für den Aufsteller verabschiedet. Immer nur flach draufzuschauen hatte ich leid, und habe mir einen Ersatz gedruckt. Category: Electronics
Voltcom replica from Voltron from available photos. I didn't know how to make the bottom of the object, so maybe you can handle it yourself.
It is a remix of https://www.printables.com/model/438829-skadis-mount-voltcraft-vc135-multimeter Adapted for my wallmounting system. 0.2mm layer height, 2 walls and 15% infill is sufficient in PLA.
I designed this in TinkerCad using the drawing "Voltcoms as Bracelets" from a Voltron TV show frame. See: https://voltron.fandom.com/wiki/Voltcom This model was originally requested by another Printable user:…
You will need 2x 020 NBR70 O-Rings which are included in the Spare-Parts-Kit of your EMF200.
CableOrganizerPowerSupplyVoltcraft v4
Replacement belt clip for Crawford Remote Print it oriented like in the picture.
The LTC1871 is a simple boost converter ex Ali Express that needs a case. I use mine to power a 19 volt laptop from a 12 volt supply. The case uses 2mm diameter screws to hold the lid on, and cable ties pushed around a "horse shoe shaped…
This is my first experience with Fusion and 3D modeling. I needed a mounting plate for my Blink panning camera. We only mount the camera when we go on holiday or are away from home for a longer period of time. We wanted a solution that…
This model lets you reuse the LDO Voron 2.4 Kit Z-Endstop PCB. Because of the extra depth that the Stealtchanger Shuttle adds to the toolhead I decided to just use the Z-Stop when i need to and not loose any Y-travel. To fix it to the…
Držák multimetr Voltcraft VC175 a příslušenství - příslušenstvím je myšleno kabely, svorky a jehlové hroty
Simple keychain with the logo for LTC, the best coin! Low on filament, post your own version below! Transparent one is PETG! Red one is PLA.
Here's a coin I made. It will serve no purpose to you but it was a fun easy model that I made. Happy printing everyone!
I tried to make this model as: easy printable/assembled as posible. Requiring minimal aditional hardware and posibility for easy modding. With right print setings it shoud also be reasonably sturdy Recomended as manny walls as possible…
I colored the boltcutter earrings from @zSchoen161 and scaled them to make a boltcutter magnet. Requires 3 5x3mm round magnets Assembly When the print pauses, insert the 3 magnets, then continue the print
This isn't really intended to be printable (though you could render it to STL and slice it), but I put it together to use with KiCad. This is a 3-digit 7-segment LED module, modeled in OpenSCAD from the dimensions given in the datasheet:…
This is a sorta Beltclip/case for those new Casette players that are still made today. This is designed specifically for the Taperoller plus from Dirttapes, I have the old MiniUSB version, feel free to tell me if it doesnt fit the USB-C…
Venturing into Multibord, I was searching for an easy way to fix my bulky Voltcraft CC-8 to the board. Since I did not find any suitable solution I made my own. Two Raised Multiboard Snaps hold this fixture pretty good. Feel free to remix…
a beltcradle for the RookMK1, for those who use mgn9h rails.
Snap-fit enclosure for LTC1871 power converter with wire guide option
Needed an easy way to get a pinch of salt when cooking so made this. Printed in PLA, straightforward printing.
Needed a mount for my 5G antenna, removed old tv-antenna on caravan and added this.
3x4 Gridfinity Storage Box for the Voltcraft VC-23 multimeter. (Height: 6u) I add mouse ears in the slicers to reduce corners warping.
Ein Start wie üblich bei Weltcup Rennen Hier als Modell
nitehawk36 backplate for orbiter2.5 and stealthchanger dragonburner backplate - no colision with optic sensor
I needed a quick solution for my anker power bank so that i can carry it on my belt... so i used my very small fusion360 skills to make a box where the power bank fits in. Then i fused both parts ( the box and the clip from @chris_78443 )…
Eine Perfekte Gridfinity Halterung für das Voltcraft VC150 Multimeter.
Partially due to the hardware I have on hand, maybe partially due to my printers accuracy, I had a really hard time fitting the pins of the carriage. It turns out that the whole belt/clip/tube assembly stuck out ~0.6mm from the back of…
Needed an insert for my Knipex 71 02 200 Boltcutter Size: 6x1 standard gridfinity
Simple case for a rather popular LTC3780-based board from Aliexpress e.g. this one: https://aliexpress.com/item/1005009222609081.html It features a place for a 4cm fan in the lid, though you might need a separate power source to feed it,…
make sure to print with lots of support, try to not support the part that clips in, this adds a lot of material to remove after and can make the fit a little too tight
Holder for oscilloscope of one of the following model series: Voltcraft DSO-6000 Series OWON XDS3000 Series
A basic 3d-printable model of the beltpiece worn by various characters from the anime Sword Art Online in GGO made by commission
The Victorinox beltcase 19mm knife is a design intended for 3D printing. It's a custom case designed specifically to hold the 19mm size Victorinox knives, typically for practical use on a belt. The design focuses on convenience and…