Search results: m10

Sort order

1,576 models

P
PrintablesBen

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Downloads
3,029
Likes
1,164
Rating
4.5
P
PrintablesLine Arc Line

Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]

This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…

Downloads
962
Likes
173
Rating
4.77
P
PrintablesPrintium 3D

LM8UU & LM10LUU Bearing Marker

Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…

Downloads
155
Likes
34
Rating
5
P
PrintablesMordiev

K1/K1 Max PC4-M10 Coupler Adapter

After I added the 3D Chameleon to my K1 Max the PTFE tubes kept falling out of the stock tube clips. I designed this addon to simply snap on a PC4-M10 coupler. Now the tubes stay put. This adapter can be used on the extruder and/or the…

Downloads
139
Likes
22
Rating
5
P
PrintablesLayerSolutions

Lenovo M10 Wallmount

Lenovo M10 (3rd Gen) Wallmount This wall mount is specially designed for the Lenovo M10 (3rd Gen) tablet. The tablet is inserted from the side , ensuring a secure fit while still allowing easy removal. The mount is perfect as a control…

Downloads
138
Likes
4
Rating
0
P
Printablesdigbat

Lack Enclosure pass through holed bolt M10

Replacement for the default Lack enclosure top inserts for feeding filament into a Lack enclosure. No glue. Top should take a 4mm PTFE tube; bottom feeds 1.75 mm filament. Print instructions Print bolt shaft upright with a 0.4mm nozzle…

Downloads
127
Likes
14
Rating
5
P
PrintablesZanfar

PC4-M10 Drybox Passthru

This will allow you to print via reverse-Bowden without taking the filament out of the drybox. Mounting is done via three M3 socket-head cap screws and hex nuts. The length of the screws will depend on your container wall thickness with…

Downloads
118
Likes
24
Rating
5
P
PrintablesSonicBroom

M10 Filament enclosure Pass through

Created this to use M10 pass though when i got a MMU2s i wanted to go from Dry box to RMU to MMU2 so designed this to go through my enclosure. this is designed for a thickness of 8mm to 9.5mm I have also made a Lac version to support a…

Downloads
89
Likes
9
Rating
0
P
PrintablesAba

leica m10p bottom protecter

not so fancy but does the job, for a solid print with pla , i use mine daily printed with ngen flex

Downloads
48
Likes
5
Rating
0
P
Printablesdigbat

M6 nut and bolt (M10 head) for Face Shield RC2 holde remix

M6 nut and bolt (M10 head) for Face Shield RC2 holded remix. Easier to fit and remove than rivet. Both threads slightly relaxed and for me fitted and threaded correctly first time. As usual with threads I suggest a minimum of 3…

Downloads
38
Likes
1
Rating
0
P
Printablesadesir

Boîtier pour prises maître/esclave KEMO M103N

Boîtier électrique pour monter un commutateur maître esclave KEMO M103N entre deux prises électriques murales. Les trous de fixation sont prévus pour des vis diamètre 2,5 ou 3 mm, l'idéal étant celles utilisées habituellement dans les…

Downloads
38
Likes
2
Rating
0
P
PrintablesMrZiemniak

Philips FM1000 connector

The power connector was designed for FM1000 series VHF transceivers. The power connectors of these trx are very hard to get. They use standard molex-pc connectors. Printing Print using a 0.25mm nozzle. Use PETG material, it's much more…

Downloads
28
Likes
0
Rating
0
P
PrintablesPhylius

BenchTop Disc Sander / BOSCH blender CNSM10 / 12.5 cm disc sander

THIS IS NOT A TOY AND CAN BE DANGEROUS! This model is mostly supportless & can be built without taking the electronics apart (no need to de-solder electronics). UPDATE LIST & EXPERIENCE: So I tought that the motor was exclusively built by…

Downloads
15
Likes
1
Rating
0
P
PrintablesHLFR ENGR

ORECK Steam100 Control Knob

Replacement part for Oreck STEAM100 : Steam Adjustment Knob Product Code: ORE-53682-01

Downloads
3
Likes
0
Rating
0
P
PrintablesHLFR ENGR

ORECK Steam100 Cable hook

ORECK Steam100 Cable hook

Downloads
3
Likes
0
Rating
0
P
PrintablesBoogie

Screw measuring tool, M2-M10, 4-120mm

Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…

Downloads
94,140
Likes
29,444
Rating
4.93
P
PrintablesJerryie

Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017

This set includes screws, nuts and washers of all kinds ISO 4017 DIN 933 With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5 The screws are…

Downloads
33,941
Likes
7,933
Rating
4.77
P
PrintablesEd Johnson

Bambu AMS No-Catch Y-Splitter PC4-M10

Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…

Downloads
14,051
Likes
2,731
Rating
4.91
P
PrintablesSilent331

Metric nuts and bolts. M4, M5, M6, M8, M10, M12, M14, M16, M18, M20 ISO Standard

ISO Standard Metric nuts and bolts. The STL files are only for the nuts as they will be the same for all applications. Fusion 360 file is included to easily customize bolt lengths and threads. The thread length in the file is 5mm from the…

Downloads
11,870
Likes
910
Rating
5
P
PrintablesLayersFarm

Bambu Lab Y-Splitter with PC4-M10 pneumatic connector and magnets

Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…

Downloads
10,187
Likes
2,190
Rating
4.85
P
PrintablesFilamentix

Hundreds of Metric Hex Screws Version 1: M2, M3, M4, M5, M6, M8, M10, M12, M14, M16, ... M48

An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…

Downloads
5,316
Likes
1,667
Rating
5
P
PrintablesTycho Design

Pull Handle Collection for M5-M10 Screws

Collection of Pull Handles for metric screws including : M5 M8 M10 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.

Downloads
4,068
Likes
1,242
Rating
4.75
P
Printablesgenja

star grip / Knob / Sterngriff M3, M4, M5, M6, M8, M10

DE: Ich habe die Wünsche der Community umgesetzt und das Durchgangsloch für die Schraube enger gemacht. Der Sterngriff lässt sich mit einer Schraube oder mit einer Mutter kombinieren. Zu der benötigten Länge der Schraube muss 10 mm…

Downloads
3,721
Likes
434
Rating
5
P
PrintablesVertigoMakes

Prusa MMU2 PTFE Holder M10 Passthrough Adapter

Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…

Downloads
3,583
Likes
585
Rating
4.98
P
PrintablesFilamentix

Complete Set of Metric Acorn Dome Cap Nuts M2, M2.5, M3, M4, M5, M6, M8, M10, M12, ..., M64

I added a tolerance of 0.2 mm to the thread diameter in order to compensate for printer tolerances. Print with small layer height, e.g. a maximum of 0.15 mm for a 0.4 mm nozzle. Please find screws for the nuts here:…

Downloads
3,424
Likes
1,134
Rating
5
P
PrintablesAlex Crow

Star grip hexagon screw M3 M4 M5 M6 M8 M10 M12

Star knob for hex screws DIN931 and DIN933 in M3, M4, M5, M6, M8, M10 and M12 The knobs have a perfectly fitting hexagon for the screws. This ensures a form-fitting power transmission when tightening and loosening. In addition, there is a…

Downloads
3,373
Likes
1,060
Rating
5
P
PrintablesTD3D

Sterngriff, star knob M4, M5, M6, M8, M10, M12, M14

Sterngriffe: von M4 bis M14 Update 06.02.2025 M4 und M5 mit größerem Griff Flache versionen in allen größen M4-M14 Update 02.02.2025 M6 mit größerem Griff weitere größen: M10, M12, M14 Update 26.01.2025: Version 2 ( V2) abgerundete Ecken…

Downloads
2,875
Likes
619
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Hexagon socket head cap screws ISO 4762 former DIN 912 M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…

Downloads
2,833
Likes
847
Rating
4.94
P
Printableskjbturok

Bambu Lab X1 Y-Splitter with inlet for pneumatic connector G1/8" (M10).

Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…

Downloads
2,785
Likes
284
Rating
4.74
P
PrintablesVC Design

M10 Bolt and Nut - 6 variations

M10 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.

Downloads
2,753
Likes
567
Rating
4.38
P
PrintablesTallat Mehmood

Metric Hex Bolts Set (M6, M8, M10)

Title: Ultimate Metric Hex Hardware Set (M6, M8, M10) - Print-in-Place Summary: A complete, high-tolerance collection of standard metric hex bolts and matching nuts. Includes M6, M8, and M10 thread profiles in multiple lengths for…

Downloads
2,508
Likes
819
Rating
5
P
PrintablesBen

M2.5 - M10 Countersunk Screws in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…

Downloads
2,340
Likes
452
Rating
5

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Downloads
2,272
Likes
332
Rating
4.94
P
PrintablesZcubed

PC4-M10 PTFE Coupler

This is a very simple coupler for joining 4mm ptfe tubes using PC4-M10 pneumatic couplers. I use these to quick connect tubes from my repbox straight to my printer or MMU2S. Category: 3D Printer Accessories

Downloads
1,964
Likes
248
Rating
4.96
P
Printableswoelpi

PC4 drybox feeder with knurled screw-on cap (M10&M6)

I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…

Downloads
1,829
Likes
353
Rating
4.91
P
PrintablesFurdTerguson

SUNLU S1 Filament Dryer M10 PTFE Guide

Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…

Downloads
1,818
Likes
242
Rating
4.94
P
PrintablesFilamentix

Complete Set of Metric Nuts Version1 M2, M2.5, M3, M4, M5, M6, M8, M10, ..., M64

Complete set of metric nuts. The diameter is 0.2 mm above the nominal diameter in order to compensate for filament printer tolerances. Print with 0.15 mm layer thickness or less. I recommend to print perimeters outside-in, not inside-out…

Downloads
1,785
Likes
470
Rating
4.86
P
PrintablesPhilA

T-Bolt Metric Set M3 M4 M5 M6 M8 M10

T-Bolt Fasteners derived from 18-8 Stainless Steel Hex Head Screws (ISO 4017, DIN 933), sizes M3 M4 M5 M6 M8 M10. -Fits into their respective sized inserts.- Inspired by the T-Bolts found in Multiboards by Makertales. T-Bolt design fixes…

Downloads
1,652
Likes
201
Rating
5
P
PrintablesTim

M10 Screw and Nut (3D Printable, ISO Metric Thread)

This model includes a metric M10 × 1.5 ISO thread screw and a matching M10 nut . Both parts are designed to be 3D printed , and are useful for: ✅ Thread calibration ✅ Mechanical prototypes ✅ Educational purposes ✅ General fitting tests…

Downloads
1,593
Likes
45
Rating
5
P
PrintablesMateusz Tokarz

Nut Cap Set M3–M10 – Dome Hex Covers

BOM: Printed with ROSA3D High Speed PLA Army Green A complete collection of six dome-style nut caps covering the most common metric sizes: M3, M4, M5, M6, M8 and M10 . Perfect for furniture builds, printers, CNC machines, enclosures,…

Downloads
1,584
Likes
706
Rating
5
P
PrintablesRasmus Additive

Hex nut to wing nut collection m3-m10

Turn your hex nuts into wing nuts easily and fast with this model. The model can be scaled to fit other nut sizes if needed

Downloads
1,576
Likes
215
Rating
5
P
PrintablesJer

Metric Fender Washer Set M3 M4 M5 M6 M8 M10 M12

Fender washers in all of the sizes typically sold in assortment packs. Parametric f3d included for custom sizes. Public domain license. UPDATE 2026-05-14: Re-rendered all STLs with correct inner diameter. Previous ID was set to exact…

Downloads
1,556
Likes
180
Rating
5
P
PrintablesJorg

M10x1.5 Bolts and Nuts

Another Bolt Sizes! Updated to fix hex socket size. More chamfer on the bolt tip, easier to clean up threads Added washer Added sets Clearer file names Feel free to send me a message if you have any special requests. Updates New double…

Downloads
1,530
Likes
84
Rating
5
P
Printablestytyk

Metric Bolt and Nut Gauge M2-M10

Update*M2-M14 version also available Metric bolt and nut gauge and measuring tool for when grabbing a bolt from that mixed bolt bin. This model only measures length up to 80mm as that was the limit of what I would currently have in my own…

Downloads
1,419
Likes
290
Rating
4.79
P
PrintablesThomas

Wingnut M3 M4 M5 M6 M8 M10

Wingnut/Flügelmutter M3-M10

Downloads
1,414
Likes
153
Rating
5
P
PrintablesBooks

M10 Nut (ISO 4032 Style 1)

Models you can use to represent M10 nuts. Varying levels of detail, not intended to be used as 3d printed objects. These models follow the specifications of ISO 4032 Style 1, the standard for the most common type of metric nut. Max, Min,…

Downloads
1,358
Likes
28
Rating
4.86
P

MMU3 PC4 m10 Rear Connector

I removed the existing collet hole spaces, slightly extended the back of the R3 back for clearance, and then added a simple design to hold the five threads for PC4M10 screw in connectors. Fusion 360 file included. .3mf with painted…

Downloads
1,344
Likes
210
Rating
4.88
P
PrintablesRestoreDoctor

Screw cover cap M6-M10

Simple screw caps - round and hex shape available. Wrench sizes: M6 - 10mm M8 - 13mm M10 - 17mm

Downloads
1,337
Likes
116
Rating
5
P
PrintablesDET-Man

CORE One Y-Axis Bearing Press Tool for LM10UU

This little tool helps you press LM10UU linear bearings into the aluminum housing on your 🥰 Prusa Core One's Y-axis assembly. It makes sure the bearings are fitted centered in the CNC machined housing. As you need to heat up the aluminum…

Downloads
1,243
Likes
33
Rating
5
P
PrintablesAntipode

Knurled PC4-M10 PTFE Drybox filament pass through

This is the version of the drybox feeder insert for using PC4-M10 fitting with the M10 x 0.9 thread. For the PC4-M6 version get the original design by RoboMagus (linked below). This pass-through adapter for a makeshift drybox solves…

Downloads
1,196
Likes
203
Rating
5
P
PrintablesFreshPrints

Anycubic Drybox Filament Sensor Bracket v4 PC4 M10 Reverse Bowden Kobra 2 Max / Kobra 2 Pro / Kobra 2 / Kobra 2 Plus / Kobra 2 Neo

Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…

Downloads
1,144
Likes
128
Rating
5
P
PrintablesRasmus Additive

Knurled bolt heads collection m3-m10

Turn your bolts into knurled bolts easily and fast with this model. The model can be scaled to fit other bolts sizes if needed

Downloads
1,105
Likes
119
Rating
5
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 21x21mm GPS module such as HGLRC M100-5883

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…

Downloads
1,104
Likes
44
Rating
5
P
Printablesmaxiangelo

Simple Bambu Lab Y-Splitter with PC4-M10 pneumatic connector

A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.

Downloads
1,059
Likes
102
Rating
4.88
P
PrintablesLine Arc Line

PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox

I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…

Downloads
1,034
Likes
156
Rating
4.93
P
PrintablesSANAIR

Remix Y-Splitter v2_M10x1_PushFit

With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe. I use…

Downloads
1,027
Likes
106
Rating
4.47
P
PrintablesMav_

Knob for Hex Bolt M3 M4 M5 M6 M8 M10 Metric

Knob for metric hex bolts For M3 M4 M5 M6 M8 M10 hex bolts The knob is designed that the hex bolt fits very tight. So it's ok to use hammer, same for the cover. Tested with PLA and PETG. Works well with 25% infill and more. No print…

Downloads
995
Likes
100
Rating
5

PC4-M10 PTFE Tube Pneumatic Fitting Model (Not for Printing)

.STEP model of the pneumatic fitting commonly on Creality hotends with bowden tubes. For use in CAD, not for printing. https://thangs.com/mythangs/file/605391

Downloads
993
Likes
60
Rating
4.63
P
PrintablesMateusz Tokarz

Ultimate Countersunk Washer Collection | M3-M10 | Perfect Flush Fit

Tired of ugly screw heads ruining the sleek look of your 3D printed parts or woodworking projects? Welcome to the Ultimate Countersunk Washer Collection . This comprehensive hardware set is engineered with precision to perfectly hide…

Downloads
937
Likes
479
Rating
5
P
Printablesstevehlau

Drylin Style Bushing RJ4JP-01-08 RJ4JP-01-10 (LM8UU and LM10UU direct replacement)

Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…

Downloads
925
Likes
74
Rating
4.8
P
PrintablesComp

Bolt and Thread Finder, M2-M10 / 4-100mm

This one I made about a year ago. I've added a places where you can add nuts so it is easy to check the threads too.

Downloads
925
Likes
109
Rating
5
P
Printablescmh

Bike Scruler - screw measuring device for M3-M10

NOTE: An improved version of this is available for purchase on my Etsy store . While you can download and print your own here, purchasing from my store gives you additional benefits: The M3, M4, M5 and M6 threads are pressed-in aluminum…

Downloads
920
Likes
165
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Flat-Head cap screw hex socket ISO 10642 former DIN 7991 M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The length on the label is to scale, otherwise it is cut in the middle. The shaft diameter and head are not to scale as this look awkward on the small labels. I sticked with the text style of the original labels by the user @Pred_457770 .

Downloads
915
Likes
237
Rating
5
P
PrintablesBowlerman72

Nut M10 4x15mm for PC4-M10 PTFE coupler

I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…

Downloads
880
Likes
77
Rating
5
P
Printablesmt_benno

2023 BMW M1000RR

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Downloads
862
Likes
31
Rating
0
P
Printablesscubam@xx

PC4-M10 to PC4-M6 Adapter

This small adapter is a quick solution to use PC4-M6 fittings instead of PC4-M10 fittings. I printed them in PLA because PETG is unfortunately too soft and you can screw them into the M10 thread with an 11mm wrench. Print Settings Rafts:…

Downloads
844
Likes
103
Rating
4.83
P
PrintablesDavidGray

MMU3 PC4 M10 Adapter

PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.

Downloads
829
Likes
145
Rating
4.92
P
PrintablesMrBojangles

LM8UU and LM10UU Lube Nozzle for Superlube

Nozzles to pack 8 and 10mm linear bearings plus caps

Downloads
804
Likes
165
Rating
4.92
P
PrintablesSpegelius

Qidi Box Filament Saver PC4-M6/M10

Update 24/03/2026: tighter M10 threads Update 15/02/2026: PTFE passthrough PC4-M10 version (untested) The original model clip-on works really nicely so I wanted to use it. Also I wanted something simpler (although I might built the…

Downloads
794
Likes
114
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Threaded Insert M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame There is no pictogram for threaded inserts as far as I know of, so I came up with this design. Print it…

Downloads
787
Likes
153
Rating
4.75
P
Printablesmcfada

Prusa Multi Color MMU2 PTFE M10 Adapter

I used these PC4-M10 PTFE Fittings for 4mm PTFE tubing. I used this 3mm ID x 4mm OD PTFE Tubing but the stock 4mm tubing will also work. Replaces the compression plate on the MMU2 with actual PTFE fittings. I needed this to switch to 3mm…

Downloads
761
Likes
145
Rating
5
P
PrintablesMlePh

bitcoin seed phrase stamper M10

A cheap and easy solution to create fire proof, long lasting recovery phrases for your crypto wallet . Inspired by the Blockmit-Jig. But with a clamp that prevents the washers from moving around while stamping. I designed it in a way that…

Downloads
754
Likes
68
Rating
5
P
Printablesfreakstuff_de

Knob for metric nut of DIN 934 - M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 and M20

A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…

Downloads
749
Likes
98
Rating
5
P
Printablessuit

Fixed PTFE Coupler for Bambu Lab P1P / P1S (PC4-M10)

Replaces the rotating coupler with a fixed one - if you intend to mount you spool holder on the side of the printer, you might be printing the Side Filament Guide Arm for P1P instead BOM 2 x original screws for PTFE coupler 2 x PC4-M10…

Downloads
741
Likes
172
Rating
5
P
PrintablesJ Design

Knurled Thumbscrews M2-M10

Different sizes of thumbscrews, as replacements or for your new projects. Need a size not listed here? Just write me a message and I will add it. How to print: To get the best possible result that does not require reworking, the layer…

Downloads
729
Likes
203
Rating
5
P
PrintablesIceman

Ender 3 V3 SE Spine cable chain - Top with with M10 Reverse bowden adapter

Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only

Downloads
722
Likes
97
Rating
4.75
P
PrintablesSpectreGadget

Knurled PC4-M10 filament pass through with 'funnel'

UPDATE: Added to the fun. Included Mordiev 's cap to the front piece. Print with TPU and it works great! I love Antipode's knurled pass through for PC4-M10, and also love kenny93's filament funnel, and then realized the two would work…

Downloads
719
Likes
134
Rating
4.95
P
Printablesk2thestank

Bambu X1 & P1P - Side Filament Holder /w P4-M10 Thread

Wanted a filament holder that was further back and had a better incorporation to my P1P glass top modification so designed my own version to match my requirements'/needs Instructions: Just insert the heat insert apply a little glue to…

Downloads
707
Likes
128
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Hex Nut M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-l Print it at 0.2 mm layer height and make a filament change in layer 3.

Downloads
701
Likes
147
Rating
5
P
Printablestimeshock6

MK4 Reverse Bowden Adapter (attaches to PC4-M10 or directly to your 4.1mm OD PTFE tube)

The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…

Downloads
695
Likes
105
Rating
5
P
PrintablesRaptorHunter

Pocket Hole Wood Jig use 688 Bearings or M8/M10 Nuts

3d printable pocket hole jig for woodworking, use high infill and thick walls to prevent part from buckling when clamping. You can use 688 Bearings or M8/M10 nuts as the drill guide. If you want to use nuts as drill guides use an High…

Downloads
691
Likes
175
Rating
4.5
P
Printablesmikeeel

gear/shift knob M10x1,25 / M12x1,25

gear/shift knob M10x1,25 / M12x1,25 size 42mmx42mmx138mm printed in petg

Downloads
665
Likes
47
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Washers M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame Print it at 0.2 mm layer height and make a filament change in layer 3.

Downloads
661
Likes
134
Rating
5
P
PrintablesMelantech

PC4-M10 fitting printed substitute

Modified spool2kool 's design so it complies with the standard PC4-M10 thread and nut measures therefore it fits in all those passthrough solutions ( SpectreGadget 's one shown in the photos). Print recommendations: Printed the clamp in…

Downloads
647
Likes
100
Rating
5
P
Printablesjurassic73

PC4M10 - Tapered threaded opening STEP/STL for design

tl;dr - use this altered BSPT(British Standard Pipe Thread) to design openings to accept a PC4M10 connector with threads that correctly accept said PC4M10 connector, seat correctly and don't cross-thread a few threads in and cut their own…

Downloads
643
Likes
70
Rating
5
P
Printablesaxe

IKEA Lack Filament Pass-through with PC4-M10 fitting

Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.

Downloads
639
Likes
126
Rating
5
P
PrintablesTHS92

M10 DIN 933 - Bolt and nut

M10 bolts from 20 to 50 + nut DIN 933

Downloads
632
Likes
13
Rating
4.5
P
PrintablesGabe

Drybox PTFE Fitting Adapter (both M10 & M6)

This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.

Downloads
627
Likes
123
Rating
4.88
P
Printablesuepsie

Grease / lube injector with cap for LM8UU / LM8 / LBBR (8mm) and LM10UU / LM10 (10mm) linear bearings

After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…

Downloads
621
Likes
79
Rating
4.86
P
PrintablesBarBarBarbucha

IBC M100 QC

IBC_M100 with quick connector

Downloads
616
Likes
39
Rating
5
P
PrintablesHeino Minnema

Wing nuts M3 - M10 for hex nut

Easy to print with the nut facing the top. Material: PETG infill: 30% Brim: yes Support: No layer: 0.2 Perimeters : 3 or more --- Also available with 3 wings: https://www.printables.com/model/439815-3-sided-wing-nuts-m3-m10-for-hex-nut

Downloads
613
Likes
63
Rating
4.83
P
PrintablesBen

M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets

I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…

Downloads
609
Likes
109
Rating
5
P
PrintablesHD_Creator

Wing nut M10 printable

I needed this thumb nut as a counter nut for mounting my lockable ball joint, which can be found here: https://www.printables.com/model/370429-generic-lockable-ball-joint Printing is very easy, just print the part in the uploaded…

Downloads
608
Likes
47
Rating
5
P
PrintablesJON.JFL

Creality Filament Dry Box 2.0 - PC4-M10 PTFE Connector Adapter

A simple adapter to fit the PC4-M10 connector to the Creality Dry Box 2.0. Designed to fit the 4mm PTFE perfectly into the adapter. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.12 Infill: 20% ATTENTION!! Due…

Downloads
601
Likes
72
Rating
5
P
PrintablesKujira

Tuya ZY-M100 Human Presence Sensor Stand

I've created this simple model to mount the “Tuya ZY-M100 Human Presence Sensor” that I got recently to stand upright on my desk, instead of mounting it on the wall. I've created the side-ways version which allows it to be low profile but…

Downloads
600
Likes
63
Rating
4.6
P
PrintablesMad Monkey

MM10 Prusa MINI mod

The Prusa MINI, we know it, we love it, we want to upgrade it! Then along comes the E3D Revo mod https://www.prusaprinters.org/prints/117149-prusa-mini-upgrade-e3d-revo-micro and our hopes are saved!! But if you don’t want to cut your…

Downloads
599
Likes
193
Rating
4.93
P
PrintablesOndřej Huf

Oshkosh M1070

glue is needed je potřeba lepidlo

Downloads
596
Likes
58
Rating
5
P
PrintablesVertigoMakes

INDX Filament Sensor Bowden Adapter - ECAS04 & PC4-M10

Wanted to make an adapter to work with the included parts, this can be installed on your already assembled INDX. This thing attaches to your filament sensor assembly and allows you to connect PC4-M10 passthrough fittings, or another model…

Downloads
580
Likes
182
Rating
5
P
Printablesfreakstuff_de

Slim knob for metric nut of DIN 934 - M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 and M20

A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…

Downloads
578
Likes
52
Rating
5
P
PrintablesOliver Thomsen

Prusa MINI PC4-M10 Bowden Fitting Adapter

Finally made a PC4-M10 adapter for push-through bowden fittings. I use it on the extruder drive, so I don't need that extra small piece of bowden tube.

Downloads
577
Likes
76
Rating
4.91