Search results: m40

Sort order

Counting matching models…

P
PrintablesJavor

New petrol canister lid M40x4

New petrol canister lid with Buttres M40x4 thread and with groove for rubber seal. Update 19.01.2024: After 3 years I discovered (and also read) that PETG does not tolerate bio-component (and some additives) in gasoline very well and the…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
465
Likes
53
Rating
5
P
PrintablesCopyRited

Audio Technica ATH-M40x/50x Earcup Shells

Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…

Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant

Downloads
195
Likes
42
Rating
0

LOCKNUT, plastic, M40

Manufacturing procedure: Material: PETG, ABS, ASA, PC, PA11 3D Printer: FDM 3D printer, average print time 20-40 minutes, choose the version with or without brim according to the need Slicer settings: 0.15 layer height Post processing…

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
183
Likes
12
Rating
5
P
PrintablesMrDefaultUser

Audio-Technica ATH-M40X hinge (left & right)

Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.

Downloads
1,964
Likes
70
Rating
4.9
P
Printablesginoadriano

40MM GRENADE - M406

I wanted something cool to store my cables and earbuds in. So i figured, why not a 40mm Grenade. Might need some scaling to fit into an actual launcher (for cosplay purposes). Designed this in Fusion360, modelled after a M406 type…

Downloads
1,006
Likes
81
Rating
5
P
PrintablesMiha Traveler

20th Century Fox By ToIAm408

"20th Century Fox" (https://skfb.ly/6W9rH) by toiam408 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

Downloads
722
Likes
7
Rating
3
P
PrintablesChenxi3D

nvida tesla m40/p40/p100 90mm fans adapter

适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4

Downloads
690
Likes
35
Rating
5
P
PrintablesPanda Makes

Tesla M40 120mm fan adaptor

I needed a way to cool my Tesla M40 in a traditional ATX case. This allows a 120mm fan to be used to cool the M40. I used this fan (warning it is vary loud and will need some sort of speed control)…

Downloads
432
Likes
12
Rating
0
P
PrintablesAaron

Audio-Technica ATH-M40x Swivel and Yoke Replacement

While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…

Downloads
423
Likes
22
Rating
4.5
P
PrintablesD3Cove

Nvidia Tesla P40 / P100 / M40 40mm Fan Adapter

This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…

Downloads
310
Likes
13
Rating
0
P
PrintablesFlorian Becker

Air Assist Atomstack M40

Air assist to get an accurate pointed airflow to the laser spot. This is for the Atomstack Laser Modul M40 (AST40W50S; 21K23) It replaces the laser shield and metal cone. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Downloads
281
Likes
18
Rating
5
P
PrintablesHenryhbk

M40 HEDP Grenade for Aliens Pulse Rifle

If you build Andrew's excellent Aliens Pulse Rifle well you can't go get the queen xenomorph without some grenades to blow that egg sack off, can you? Now in the movie they are called “30mm grenades” but since the launcher in the actual…

Downloads
273
Likes
29
Rating
0
P
PrintablesMammoth-3D

30KG Pulling Power! Voron M4 Extruder + Kraken Motor Upgrade = M404

The Advantages of a Dual-Extruder Setup with a Secondary Pulling Extruder A 3D printer’s extruder is a critical component responsible for feeding filament into the hotend, where it is melted and deposited layer by layer to create a print.…

Downloads
265
Likes
123
Rating
0
P
PrintablesDonatZ

Remix Lithophane Moon Lamp light fixture m40

I slightly modified the tripod leg shape. I broke a lot of them and I realized a bit stronger shape.

Downloads
227
Likes
66
Rating
2
P
PrintablesKritoke

Tesla M40 Blower Fan Adapter

WARNING: Since this adapter deals with electronics/heat, use it at your own risk. I have been using this live for several months without issues with my setup. Your mileage may vary depending on your conditions/tower/cooling/etc. Brief…

Downloads
215
Likes
14
Rating
5
P
PrintablesJussi Aro

Chicken egg shell with M40 threads

I modelled a chicken egg. Could be a nice gift for easter or a rhytmic device with rice in it. This is purely practise version for me to understand the process. Please contact me for ideas and suggestions. I printed with Prusa MK4 with…

Downloads
215
Likes
8
Rating
0
P
PrintablesTomTLC

M40 BOLT AND NUT

Simple BIG bolt and nut. Great fidget toy and tread tolerance test.

Downloads
201
Likes
5
Rating
0

Heizungsadapter M40x1.5 zu M30x1.5

Dies ist eine neue Version der gleichen Idee, die schon von jay1992 gepostet wurde. Der Unterschied besteht darin, dass hier das Gewinde zum Anschrauben an die Heizung länger ist - bei meiner Heizung war das nötig, da sonst kein Grip…

Downloads
176
Likes
4
Rating
0
P
Printablessporewoh

BM40 High Pro Case

High profile case for the BM40. Has similar dimensions to the Hi-Pro Planck case, only with holes compatible with the BM40. This case is split up differently than most cases: To avoid unsightly seam lines, the case is split into its main…

Downloads
148
Likes
11
Rating
0
P
Printableskuyongcreates
Downloads
138
Likes
17
Rating
0
P
PrintablesLexaAstarof

Lock Nut M40 1.5mm pitch

Thickness is 7mm, and spanner width is 50mm. Modeled with ISO profile, using tolerance 6H from ISO 639-3 (minor diameter can be up to +0.3mm). Therefore, I modeled it with a +0.15mm margin, which should be enough whether you over or under…

Downloads
130
Likes
4
Rating
5
P
PrintablesLaisVoon

Audio-Technica ATH-M40x Earcup Yoke

I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…

Downloads
119
Likes
19
Rating
5
P
Printablesmarleysan

Audio Technica ATH-M40x hinge stop

Use the same screws that keep the headphones together to add this 3D printed addon that stops that hinge from working. This prevents the headphone to become collapsable/portable but if you keep them on your desk that's not a problem. I…

Downloads
113
Likes
11
Rating
5
P
PrintablesNanodesigner

Cuscinetti lineari LM6LUU- LM8LUU- LME10UU- LM12LUU- LM16LUU- LM20LUU- LM25LUU- LM30LUU- LM40LUU- LM50LUU

Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…

Downloads
105
Likes
5
Rating
0
P
PrintablesOBA

M40x1.5 Blind Stuffing + Nut and TPU-Sealing / M40x1.5 Blindstopfen + Mutter und TPU-Dichtung

M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…

Downloads
102
Likes
7
Rating
0
P
PrintablesRob1
Downloads
98
Likes
13
Rating
0
P
Printablessk

PCI(e) Fan Mount 92mm - SilverStone RM400 / RM42-502

Update 20241101 : v2 added with an 4mm offset (so the fan hovers with a bit more clearance above the low profile PCIe devices) This is a simple top or front mount for a 92mm fan, for in use with a Silverstone RM400 and/or RM42-502 4U…

Downloads
94
Likes
26
Rating
0
P
PrintablesFaboElChapo

M40A6 Foam Dart Sniper Shell

You can print this shell for the shell ejecting M40A6 Dart Sniper Rifle. My version of the shell is a little bit slimmer than the original one. Using the original meassurements always lead to the shell getting stuck when pulling back the…

Downloads
92
Likes
24
Rating
0
P
PrintablesSUSLOV ALEXANDR

Cooling System for NVIDIA Tesla M40 on Fan 6020.

I will make cooling for other cards, send me the dimensions. This is a cooling system designed specifically for the NVIDIA Tesla M40 graphics card, utilizing the 6020 fan. The 6020 fan is a high-performance cooling solution that provides…

Downloads
90
Likes
2
Rating
0
P
PrintablesTOKENIZER

osVAC neo M40 + step + Fusion 360

M40 male adapter I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…

Downloads
90
Likes
4
Rating
0
P
PrintablesDiesel Dummy
18+

The source marked this model as adult content.

Downloads
89
Likes
12
Rating
5
P
Printablesdmclean

Designer Lithophane Moon Lamp Bayonet Adapter with M40 by 2.5 Pitch Threads

Remix of NZ Bayonet Adaptor for Moon Lamp with M40 by 2.5 pitch threads to accept an Asian sourced hanging twisted rope type of lamp socket that I found on Amazon.

Downloads
83
Likes
12
Rating
0
P
PrintablesSir Thommes

OsVAC M40 auf Absaugung Makita DRT50

Anschluß (M40) für die Absaugung der Makita DRT50. Gedruckt hab ich das in TPU. Der Adapter wird einfach nur auf die Absaugung gesteckt. Achtung, das Teil sitzt dann sehr spack!

Downloads
81
Likes
8
Rating
0
P
PrintablesTOKENIZER

osVAC neo M40H40-withSlipring + step + Fusion 360

osVAC neo M40H40-withSlipring + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist…

Downloads
76
Likes
6
Rating
5
P
PrintablesBerserker

Heizkörperthermostat (Radiator thermostat) Adapter Oventorp M40x1,5mm

Adapter für Standard Heizkörperthermostate auf das alte Gewindemaß M40x1,5. Ich konnte im gesamten Internet keinen Adapter für die tollen elektronischen Thermostate finden, deshalb selbst ist der Mann. Bitte in PETG drucken da diese alten…

Downloads
74
Likes
4
Rating
0
P
PrintablesHDRoni

Festool D27 & osVac M40 adapter for Makita top and edge router

Update: Combination adapter Festool D27 and osVac M40 to Makita Festool D27 DM-AS/CT adapter for Makita top and edge router RT001G, DRT50, RT0700C, RT0702C, RP0900, M3601, MT361 I modeled the adapter myself and tested it until it fits…

Downloads
67
Likes
2
Rating
0
P
PrintablesGX1400

Morserino bracket for Pelican M40 Micro case

Source Fusion 360 files included so you can remix or modify. Right side stores accessories and is elevated so lid captures items. Should be enough room to hold a pair of headphones on top of the morserino. For the morserino captures, I…

Downloads
62
Likes
12
Rating
0
P
Printablesmarleysan

Audio Technica ATH-M40x - earcup hinge range limiter

Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…

Downloads
61
Likes
9
Rating
0
P
PrintablesMSCsaba

Adjustable Heavy-Duty Leveling Foot – M40×3 (90–120 mm)

This adjustable leveling foot is designed for high-load, structural and heawy applications where precise height adjustment and stable load transfer are required. The component features a large-diameter M40×3 threaded body , reinforced…

Downloads
61
Likes
12
Rating
0
P
PrintablesOakenSkull

Winder Tool for Makita Line Trimmer DUX60 EM409MP or similar

An easy to print and assemble winder tool for Makita line trimmers. After tearing a ligament in my wrist I've found it particularly painful to wind line onto my trimmer. This motivated me to build a tool to add some leverage and lighten…

Downloads
58
Likes
8
Rating
0
P
PrintablesHDRoni

osVAC neo M32 and M40 for Festool dust extractor CLEANTEC vacuum cleaner

I modeled the Festool adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter printed in PETG

Downloads
57
Likes
10
Rating
0
P
PrintablesMarkuzzzi

Honeycomb Wall Holder for Pocket Laser Distance Measurer STANLEY TLM40

This is a holder keeping your STANLEY TLM40 Pocket Laser Distance Measurer / Rangefinder nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The device sits tight in the pocket - this is intended as I do not use it all too…

Downloads
56
Likes
12
Rating
5
P
PrintablesAndre

Bosch GLM40

a simple wall mount for the Bosch GLM40 measuring device. There are 6mm holes for screws on the back wall. Printed with PETG.

Downloads
56
Likes
9
Rating
0
P
PrintablesFaboElChapo

M40A6 Foam Dartblaster Magazine (with variants)

Theres two options for the magazine and the bottom. One being a normal/blank one so you could modify it to your liking as well. Assembly is pretty easy. Insert the Follower into the Mag from the bottom. Push the spring in and then close…

Downloads
55
Likes
7
Rating
4
P
PrintablesPetman

Threaded lens hoods M52, M40.5

I included the lens hoods and a small test print for the threads, so you can fine tune the size in your slicer. With tha tests make sure to print them such as the threads ar on the top, so there won't be an issue with elephant's foot.…

Downloads
54
Likes
5
Rating
0
P
PrintablesHDRoni

osVac M40 and Festool D27 Combi-Adapter 2in1 (Fusion 360)

Vacuum cleaner combination adapter 2-in-1 osVac M40 and Festool D27 to make yourself. Fusion 360 file to model your own adapter. Because of the grip surface you can easily remove the adapter

Downloads
53
Likes
3
Rating
0
P
PrintablesRybaMike

Bafang DP C18 display (UART / CAN) for BBS/ M620/ M400 Top tube mount

Move the Bafang display from handlebars to top for a cleaner look and protection in crashes. Also enables the use of handlebar mounted headlights. Designed for a 32.5 mm top tube, i've encluded the model so you can adjust to your diameter…

Downloads
53
Likes
6
Rating
0
P
Printableskofezavr

Mischief M40 Clicker Cup

Clicker Cup for Mischief M40 grinder. Prevents clicker from breaking.

Downloads
52
Likes
5
Rating
0
P
PrintablesTritschi

Supersize Wheel of Husqvarna AM405 (AM415) Automower

Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will…

Downloads
50
Likes
9
Rating
0
P
PrintablesDamian

Maytronics Dolphin M400 cover clip

This is the replacement clip that goes under each side cover and hold them to cover the filters

Downloads
48
Likes
3
Rating
0
P
PrintablesJazz Cabbage

Case for Zhiyun Fiveray M40 Video Light

This model is a storage case for the Zhiyun Fiveray M40 video/photography light. This model features 2 designs, one case has breather vents so the light can be stored while hot. The other case is fully enclosed and is best suited for…

Downloads
47
Likes
7
Rating
0
P
PrintablesFaboElChapo

M40A6 Foam Dart Sniper Barrel Adapter + Silencer

Note: Depending on your printer you might need to slightly scale up or down the model to ensure a snug fit onto the barrel. The silencer is very plain because im using a cover for it anyway. Feel free to add more details and adjust it for…

Downloads
44
Likes
4
Rating
0
P
PrintablesPan_Barszczyk

SONY/Minolta E mount to M40x0.75 adaptor

If you are using a slicer with variable layer height make only first 5 mm with 0.1mm layers, the rest can be 0.2mm (printing with the thread down). Print Settings Printer: Craftbot2 Rafts: No Supports: No Resolution: 0.1mm Infill: 10%…

Downloads
43
Likes
9
Rating
0
P
Printableslwdrew

Medication vial holder for Pelican M40 micro case

Friend of mine is an EMT and saw a similar model for a different case than is used at his ambulance company so I threw this together for him Has not been tested so please send your feedback so I can tweak it if necessary Designed for 10ml…

Downloads
42
Likes
6
Rating
0
P
PrintablesLogoiLab

AtomStack A5 M40 Zeroing Block

This is a utility part to assist in perfect zeroing your X and Y axis on an AtomStack A5 M40. You will need to do a couple of modifications to the laser chassis while installing this. Move the belt retaining T-nut on the left side up to…

Downloads
41
Likes
5
Rating
0
P
Printablesjangrewe

GOODMAN ZONE Laser Holder for DeWalt TLM40

While building my GOODMAN Zone, i found out that the DeWalt TLM30 Laser Rangefinder, which is mentioned and shown all over the project, and for which a mount is provided, is now End-Of-Life and has been replaced with the DeWalt TLM40 -…

Downloads
37
Likes
3
Rating
0
P
Printablesseansean

OMPHobby M4/M4 MAX Canopy Mounting Post OSHM4025

OMPHobby M4/M4 MAX Canopy Mounting Post OSHM4025

Downloads
29
Likes
3
Rating
0
P
PrintablesBeo666

Heizungsadapter M40x1.5 - M30x1.5 Thermostat

Heizungsthermostatdapter M40x1.5 - M30x1.5 Zu beachten: Auf das Distanzstück sollte eine 2-Cent-Münze geklebt werden, damit sich nichts durchdrückt. Das Distanzstück kann auf die benötigte Länge skaliert werden. Ich empfehle den Druck in…

Downloads
29
Likes
2
Rating
0
P
PrintablesZachar Čuřík

Multimeter Stand for Alientek DM40

Stand for Alientek DM40 Multimeter and its Accessories: Improvements: ◦ Test probes can be inserted into the stand with or without protective caps ◦ Model has built-in ON / OFF / LOCK button Non-printing necessary accessories: ◦ 4x M3…

Downloads
28
Likes
4
Rating
0
P
PrintablesMorgan.T

Vaporesso Luxe PM40 Stand

Stand to stabilise my e-cig during charge print in PLA variable layer-high no support on prusa mini

Downloads
28
Likes
1
Rating
0
P
PrintablesPhilip J Fry

Mitsubishi 4M40 Timing Chain Replacement Tool

This will make your life much easier changing a timing chain on a 4M40 motor. The tool slots into place with the rocker cover off and will prevent the timing chain from jumping off the cam gear and losing the engine timing while winding…

Downloads
28
Likes
1
Rating
0
P
Printablesantlers

Zhiyun M40w Grip and Arca Tripod Plate

A chunky grip and vertical + horizontal arca-type tripod plate for the Zhiyun M40w pocket floodlight. It includes a hole for the USB port to keep charging, and plenty of room to adjust the dials without removing the grip. Pictured here in…

Downloads
27
Likes
5
Rating
0
P
PrintablesChris Buisson

BMW M40i Keychain Multi-Layer Color

Printed with 0.1mm layer heights (also works for 0.2mm). Simply add a g-code pause command at each layer change that starts a new color, as shown in photos. Designed this for my best friend Max who just purchased a X3 M40i. Upload your…

Downloads
27
Likes
5
Rating
0
P
PrintablesTolzi_Woodwork

Osvac neo m40 to m35

Hier ein Adapter von M40 auf M35 für das Osvac System, drucken am besten mit 0,2mm Layer bei 0,4er nozzle und Oben und unten jeweils 3 Schichten für bessere Stabilität

Downloads
26
Likes
0
Rating
0
P
PrintablesHDRoni

osVAC neo M32 and M40 for DEWALT DWE4257KT-QS angle grinder DWE46150

M40 and M32 male adapter for DeWalt angle grinder DWE46150 125 mm polishing attachment I printed it in PETG I modeled the DeWalt adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the…

Downloads
24
Likes
3
Rating
0
P
PrintablesFrancisco3D

Tray 1 media support for HP Laserjet 400 M401 RC3-2563

Tray 1 media support for HP Laserjet 400 M401. This 3D model is based on HP Inc. Original work RC3-2563 And it's meant for personal use only thank you!

Downloads
23
Likes
1
Rating
0
P
PrintablesMrEUser

Monitor mount for Yaesu FTM400(dx) head unit

Welcome to my second model. I made this out of PETG for rigidity. It hooks over the top of a flat panel monitor and supports the head unit for a Yaesu FTM-400 (and XD). This is not compatible with every flat panel monitor in existence,…

Downloads
18
Likes
5
Rating
0
P
PrintablesDerKuchenmann

Gritfinity Bosch GLM40

Gritfinity Bosch GLM40 - Image show first print with error text

Downloads
18
Likes
4
Rating
0
P
PrintablesJory Sharr

HDD 3.5 Rails for RM4024 4U rackmount case

Simple replacement rails for the 4U Rackmount Chassis Model RM4024. Rackmount Mart - 4U Rackmount Chassis - RM4024 I printed them on the edge as drawn to keep strength at the screw mounts. used 3 walls and its got enough flex to slide…

Downloads
18
Likes
0
Rating
0
P
PrintablesDan

Lululemon Mirror Driver Board Mount (LM40SAMFHD700AG25WV)

A PCB mount for the LM40SAMFHD700AG25WV driver board used in one of the Lululemon Mirrors. Its a press fit but still has holes for mounting the PCB with hardware. The following hardware I used: 4x M3x4.2 Heatset Inserts (However better…

Downloads
18
Likes
2
Rating
0
P
PrintablesBen

Zhiyun M40 Fiveray Holder

Zhiyun M40 FIVERAY holder I made to store the light on the wall, I used 3M tape to attach though could easily be remixed to have screw holes. I printed with 0.2 layer height and 15% infill, however this shouldn't matter much due to the…

Downloads
18
Likes
4
Rating
0

Terminal M40x1.5 - 6 x M5

It is a good idea to re-drill the screw connection to a diameter of 2.5 (without damaging the lock). M5 threads can be used without modification, the screwing axis must be observed. Otherwise calibrate to M5. PTFE tube 4 x 2.5 Direct…

Downloads
18
Likes
3
Rating
0
P
PrintablesThingineer

Samsung M4020/HP 432 printer paper tray reinforcement

The main paper tray from some laser printers from Samsung and HP have a pull "handle" thats very flimsy and thin, causing the handle area to be damaged. This model helps the reinforcement of that area and can even be used in trays that…

Downloads
16
Likes
1
Rating
0
P
PrintablesLord Radford

ASG VFC M40A3 Mag Holder Airsoft Molle

If you have the old ASG VFC colab M40A3 you may have come across the issue like me that there are few good solutions for keeping spare mags to hand. I made the Molle adaptor a separate part for both ease of printing and so other types of…

Downloads
16
Likes
2
Rating
0
P
Printablesxwing

DDSM400 Support

Mounting support for servo motor Waveshare DDSM400, print with layer 0.15 mm, fill 40%.

Downloads
14
Likes
0
Rating
0
P
Printablespaw3D

EN Conduit Spreader Tool - Sizes M16 to M40

Purpose This tool is meant to widen the ends of EN conduit pipes. This allows for a press-fit connection to another pipe by simply sliding them into one another. Sizes Supported EN conduit sizes are: M16 M20 M25 M32 M40 Assembly The tool…

Downloads
14
Likes
4
Rating
0
P
Printablesphilipf

HAIER HDY-M40 and HDY-60M dryer filter retaining clip

Replacement for the now obsolete part. I reverse-engineered this from the original part for a friend. Posting it here in case it saves someone some time and money. It should also work for these machines: HDY60, HDY60M, HDY-60M, HDY60,…

Downloads
14
Likes
0
Rating
0
P
PrintablesUltrawipf

BM40 ortholinear case (2 parts)

Modified to be printed on smaller printers in 2 parts and adjusted dimensions and usb port position. Fits a KPrepublic BM40 with usb c and looks great with translucent PETG. Category: Hobby

Downloads
13
Likes
3
Rating
0
P
PrintablesTorsten Brumm

Gridfinity Halter für Stanley TLM40 Laserentfernungsmesser

Ein weiterer Halter für meine Gridfinity Sammlung, hier für den Stanley TLM40 Laser Entfernungsmesser ( Amazon )

Downloads
13
Likes
1
Rating
0
P
PrintablesGilberto S.

Button Laser Hilti PM40

Slide and good to go. Printed in PETG, 0.2mm 2 walls / 15% / Supports on the inside

Downloads
12
Likes
0
Rating
0
P
PrintablesTobi Höher

SARO EM26 / EM40 (sparepart)

Hello, I have measured and then constructed the original part for a colleague. It replaces the defective original part of the SARO EM26 / EM40 ice cube machine, which had broken due to material fatigue. My colleague has installed it and…

Downloads
12
Likes
2
Rating
0
P
PrintablesMar Ha

Solight DM40 battery cover

My battery cover broke so I made model for the replacement. Printed on Prusa Mini 0.6nozzle, 0.3mm layer height, Prusament PLA

Downloads
10
Likes
0
Rating
0
P
PrintablesGreg Bennett

Alientek DM40A Holder

Alientek DM40A Holder, A hole will need to drilled for the power button, And glue the partes together.

Downloads
9
Likes
1
Rating
0
P
PrintablesWilliam

ATH-M40X earpad cloth holder

Update: I made the outer ring smoother and thinner in places where it was poking out too much. I have not tried that version yet. It should be more flush inside the pad mount. My Audio Technica ATH-M40X headphones fake leather was coming…

Downloads
8
Likes
1
Rating
0
P
PrintablesITK-TechLab

Milesight EM400 - Fitting for pole mount

Milesight EM400 - Fitting for pole mount

Downloads
8
Likes
0
Rating
0
P
PrintablesPaul Lützner

Alientek DM40 Multimeter Bench Stand

A magnetic stand for your Alientek multimeter. Pretty sure it requires the "luxury" version of the multimeter with magnets in the back. Has 2 slots for 15mm magnets to glue in. Works pretty well for me so far. f3d file attached so you can…

Downloads
8
Likes
1
Rating
0
P
Printablesk1n3k

Mikuni TM40/HS40 Carburetor

This is a 3d scan from a Mikuni TM40 or HS40. I believe it came from a harley but not positive. Do something cool with it and share some pics!

Downloads
7
Likes
0
Rating
0

OSVAC M40 HT50 90°

Dies ist ein 90°Bogen mit Osvac M40 auf ein HT50

Downloads
7
Likes
0
Rating
0
P
Printablesc--b

Tesla M40 roof mount for Fractal North case

This is a case mount for the NVIDIA Tesla M40 compute GPU, it's intended to be used with the fractal north case. This design is not at all perfect, the diverter does not fit flush with the card, and the screw holes are slightly too small.…

Downloads
6
Likes
0
Rating
0
P
Printablessengel

Flot roof stand - Hoymiles HM400

Since I have a Hoymiles HM400, which is smaller, I modified Chris's great design to have a solid stand.Since I have a Hoymiles HM400, which is smaller, I modified Chris's great design to have a solid stand.

Downloads
6
Likes
1
Rating
0
P
PrintablesGEMUSE

XH-M401 Potentiometer cover

5 minute print to protect DC-DC converter from unwanted potentiometer rotation. Simply screws on potentiometer thread and allows regulation via screwdriver.

Downloads
6
Likes
1
Rating
0
P
Printablestesluck99

Rockford Fosgate TM400x4ad

I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…

Downloads
6
Likes
0
Rating
0
P
PrintablesJason Brashear

Nvidia Tesla P40 / P100 / M40 40mm Fan Shroud: Single, 2, 3 and 4 Card (Parametric)

***** UPDATED to V2 ***** ***************************** Fixed the mirror issues. ***************************** Why I built this The Tesla P40, P100 and M40 are passive cards. They were designed for server chassis with a wall of high…

Downloads
6
Likes
1
Rating
0
P
Printablesblechbude

Schachtel für Filterdosen M40 & M40,5; Box for filter canisters M40 & M40,5

Schachtel mit Deckel für fünf Filterdosen Modell M40 und M40,5 ............... Box with lid for five filter canisters, model M40 and M40.5

Downloads
5
Likes
0
Rating
0
P
Printablesblechbude

Canon 25mm Objektivdeckel mit Gewinde M40x0,5; lens cap with thread M40x0.5;

Objektivdeckel mit M40x0,5 mm Gewinde zum Einschrauben für z.B. das Canon 25mm f3,5 Objektiv; Den Teil mit Gewinde mit der niedrigst möglichen Layerhöhe drucken. .......................... Lens cap with M40x0.5 mm thread for screwing in,…

Downloads
4
Likes
0
Rating
0
P
Printablessekurit

osVac M40 adapter for Hikoki/Metabo C10RJ table saw

This is a remix of the smaller M32 adapter (excentric variant), but I wanted to use a bigger M40 bajonet connector.

Downloads
4
Likes
0
Rating
0
P
PrintablesKvardik

Mouse Scroll Wheel - Eternico M402

My Eternico M402 Vertical Wireless mouse had a broken scroll wheel, so I disassembled the mouse, measured the original part, and recreated the wheel in Tinkercad. I then 3D printed the replacement and used it to repair the mouse. This is…

Downloads
3
Likes
0
Rating
0
P
Printableskwtsospag

UGREEN CM400 m.2 ssd stabilazier

I designed a spacer for the ugreen cm400 ssd case, because the rubber ssd holder isn' capable to hold the ssd in place, in case of a drop. You can use one spacer, but i recommend too. I use PETG for printing the spacers because the ssd…

Downloads
3
Likes
2
Rating
0