Search results: m8p

Sort order

114 models

P
PrintablesBrithim

Manta M8P Din Mount [Low-Profile]

NEW MOUNT HERE: https://www.printables.com/model/877941-manta-m8p-din-mount-v2-low-profile They are used to mount the BTT Manta M8P Board to a DIN rail on a low-profile mount.

Downloads
910
Likes
32
Rating
0
P
Printablesjeronbernal

Super Cool BTT Manta M8P 5015 Fan Channel

A remix of @Anollya_1115736 M8P Fan duct but with @SimplifiedLife's Vents from his Octopus Duct, I increased the walls to be thicker on top and sides for it to be more sturdy (the original cracked for me, and a optional bracket to use if…

Downloads
783
Likes
121
Rating
5
P
PrintablesRolls17

Manta M8P Backpack

This has built in supports. Print as oriented and no supports. Lid is designed to use 120mm Fan.

Downloads
583
Likes
61
Rating
4.67
P
Printablesmmuellerphoto

Manta M8P Mount for DIN Rail Bracket & Fan Mount

This is a Manta M8P Mount for my DIN Rail Bracket. You can find the bracket here ! In addition I created a fan mount. The fan mount can be used without the rail mount. The fan mount is for 40mm fans. The printable spacer can be edited to…

Downloads
548
Likes
41
Rating
0
P
PrintablesAnollya

Manta M8P - TMC Cooling - Fan 5015

For cooling the TMCs on the Manta M8P. I tested it with BTT TMC2209 and sunon 5015. Print it upside down. Screw: M3x8 SHCS Category: 3D Printer Parts

Downloads
540
Likes
68
Rating
5
P
PrintablesBrithim

Manta M8P Din Mount V2 [Low-Profile]

They are used to mount the BTT Manta M8P Board to a DIN rail on a low-profile mount. Print settings: I used ABS @ 0.2 Layer Height Used normal supports (Tree supports caused weird issues) Filament: Ice White ABS @ 240c, 100c Bed

Downloads
528
Likes
54
Rating
5
P
PrintablesEngineer997

MANTA M8P DIN mount

This model was created by modifying the Octopus DIN mount from @clee

Downloads
524
Likes
44
Rating
5
P
Printablesk2thestank

BigTreeTech Manta M8P Enclosure (no longer updating)

Designed this model to hold and support the BigTreeTech Manta M8P board uses the 4040 extrusion and T-nuts to secure it to the sides and back but will utilize the existing holes for cable management. It will be slightly tight to install…

Downloads
486
Likes
46
Rating
5
P
PrintablesD0nw4yn3_3DP

BigtreeTech Manta M8P v1.1 + v2.0 Airduct With CB1/CM4

Cooling Hood BigtreeTech Manta M8P v1.1 and v2.0 For CB1/CM4 with 60x60x15 Fan M8P. drivers with 5015 Blowerfan. And ziptie mountingpoints for esay wire wireing.

Downloads
445
Likes
94
Rating
5
P
PrintablesFrogree

BTT manta m8p v2.0 low height dinrail mount

BTT manta m8p v2.0 low height dinrail mount print 4 rings, dinrailmount1 and dinrail mount2 4pcs of M3 screw (length 8-12mm) will be needed.

Downloads
438
Likes
39
Rating
0
P
Printablesdemek

Manta M8P universal bracket, horizontal or vertical

Fits well with Voron design DIN clips. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl

Downloads
426
Likes
31
Rating
5
P
PrintablesAndersen

btt M8P v2.0 cooling dock/fan mount

04/10/2024 add mount v1.1 for m8p 1.0 1.1 2.0 https://www.printables.com/model/838734-btt-m8p-v20-cooling-dockfan-mount-v11 BTT m8p v2.0 cooling dock for cb1 mcu and step driver also work with m8p v1.0/v1.1 add DIN rail mount for install…

Downloads
392
Likes
44
Rating
0
P
PrintablesKilla_Prints

Zaribo ZLC Electronics Box for BTT M8P

The Zaribo ZLC kit comes with a BTT Octopus Pro, but I wanted to run Klipper and have things as tidy as possible. A BTT Manta M8P does the job but is slightly larger and has different mounting holes. I remixed the Zaribo case to suit the…

Downloads
356
Likes
16
Rating
5

BTT Manta M8P din rail holder with fans

I created this board holder for the Big Tree Tech Manta M8P board. It also allows you to mount fans above the board for cooling included dual 4020 fan mounting option( Untested! ) as well as standard PC fan mounting option. I have…

Downloads
349
Likes
33
Rating
0
P
Printablesk2thestank

BigTreeTech Manta M8P Enclosure v2

** modified DIN rail version coming soon, it's in the early testing stages to verify fit and design update (UNTESTED) but currently printing** Designed to hold a Manta M8P Mother board with or without the CP1 addon Printed in ABS test…

Downloads
330
Likes
25
Rating
5
P
PrintablesSparkinium

2020/4020 mount for Bigtreetech Manta M8P

I needed a mount for my Manta M8P for my Switchwire (Ender conversion). Due to size constraints, I originally designed the 4020 mount, then switched to 2020. There's one quirk which I'm unsure of: The camera/display ports sit under the…

Downloads
275
Likes
24
Rating
0
P
PrintablesfreakyDude

BTT Manta M8P 120mm Fan Mount

Printed it with ASA, Nozzle 0.4mm, Layer Height 0.2mm Can used together with the fan mount → https://www.printables.com/model/1100119-flat-btt-manta-m8p-120mm-dinrail-mount Changelog V2 increased screw tube stability and size a bit Love…

Downloads
253
Likes
42
Rating
0
P
Printablesmjonuschat

Manta Rays • BTT Manta M8P Fan Case

Description Running drivers at higher currents causes them to become extremely hot. To ensure reliable operation, cooling is necessary. This fan case provides ample cooling for all 8 driver slots and has been tested with BTT TMC2209,…

Downloads
253
Likes
41
Rating
5
P
PrintablesMSchulze

BigTreeTech Manta M8P Caribou

Hier ein Gehäuse für das BigTreeTech Manta M8P für den Cáribou. Es sind jeweils ein Lüfter für die Motortreiber und ein Lüfter für das CM4 Modul vorhanden. Gedruckt habe ich es in PETG und 0,2 Schichthöhe.

Downloads
251
Likes
32
Rating
0
P
PrintablesKilla_Prints

Zaribo ZLC Electronics Box w/ Heat Inserts for BTT M8P

THIS VERSION USES HEATSERTS. The Zaribo ZLC kit comes with a BTT Octopus Pro, but I wanted to run Klipper and have things as tidy as possible. A BTT Manta M8P does the job but is slightly larger and has different mounting holes. I remixed…

Downloads
241
Likes
15
Rating
0
P
PrintablesfreakyDude

Flat BTT Manta M8P DinRail Mount

A spring based flat mount for BigTreeTech Manta M8P boards on a Voron printer (or similar with DIN35 rails). Can used together with the fan mount → https://www.printables.com/model/1076080-btt-manta-m8p-120mm-fan-mount You also need 4x…

Downloads
236
Likes
17
Rating
4
P
Printablesdevildog9903

Manta M8P Driver CB1/CM4 Cooling Bracket

Print Settings First Layer Height: 0.25mm Layer Height: 0.2mm Extrusion Width: 0.4mm, forced Infill Percentage: 40% Infill Type: Adative Cubic, Grid, Gyroid, Honeycomb, Triangle, Cubic Wall Count: 4 Solid Top/Bottom Layers: 4 Seam…

Downloads
224
Likes
33
Rating
0
P
PrintablesDajomas

Manta M8P Backpack case update

I am a big fan of heat set inserts so I adjusted the original to allow for some heat-set inserts instead of screwing directly into the filament. I only used the Heat-set inserts to hold the lid, not to hold the board in place as I expect…

Downloads
217
Likes
21
Rating
0
P
PrintablesAntipode

120mm fan mount for BTT Manta M8P

BOM: 4 of threaded inserts (Voron standard M3x5x4). 4 of 30mm SHCS to attach the mount and the Manta board. 4 of whatever length M3 screws you need to mount your fan. I used 25mm SHCS. Print instructions: Set “Bridge counterbore holes” to…

Downloads
216
Likes
37
Rating
4.8
P
PrintablesPushingPixels

BTT Manta M8P v2.0 Low Profile Din Mount asymmetrical

This low profile DIN mount for the Manta M8P v2 shifts the board off center on the rail. There are two different versions available, both moving the center of the board by 10mm but in different clamping directions. Mounting holes are…

Downloads
203
Likes
12
Rating
0
P
PrintablesFlavour

BigTreeTech (BTT) Manta M8P DIN Mount and Fan Cover

Ignoring the wires, this print will help you mount the BTT Manta M8P to a din rail. I've included the step and f3d files, so you can customize it quite easily to attach to just about anything. This build uses 4025 fans to cool the…

Downloads
192
Likes
15
Rating
5
P
PrintablesGhozt

K1 Max Manta M8P Mount Remix

After the print, I drilled out the holes in the mount to 4mm to fit heat set inserts. I also drilled out the holes on the fan mount (on the legs) to 3.5mm. This is an optional step I chose to take.

Downloads
186
Likes
20
Rating
5
P
PrintablesNadir @ CN3D

SV08 BTT Manta M8P Mount & Cooling Mod Kit

This kit allows you to install the BTT Manta M8P motherboard into the SV08 3D printer using a precision-designed mounting bracket and cooling shield system. The red IO template helps mark and cut the existing "milk tray" (see attached…

Downloads
185
Likes
48
Rating
5
P
Printablesmojotaker

BTT Manta M8P Board mount

I needed a board mount for the Manta M8P. Thank you @Byte Insight for the Step Files

Downloads
182
Likes
19
Rating
5
P
PrintablesZilver

BIQU Manta M8P Mount (Ender 5 Plus)

This is a mount made for the ender 5 plus, to hold the BIQU Manta M8P Main board.

Downloads
169
Likes
9
Rating
4
P
PrintablesOttoGlass

Improved Ender3V2 Manta M8P Case

This case may not be compatible with ender3s with shorter pads. My ender3 measures 45 mm from the underside of the Y-carriage extrusion to the table, while this case measures 42 mm. Additional Hardware 4 M3x16 (Cover) 4 M3x6 or M2.5x6 for…

Downloads
159
Likes
14
Rating
0
P
Printablesbrian s
Downloads
152
Likes
14
Rating
0
P
Printablesnochkin

BTT Manta M8P Double DIN mount

This BTT Manta M8P mount is designed to install the MCU board across two DIN rails. This rotates Manta by 90° and helps a better air flow when installed in Voron 2.4/Trident printers. BOM: 4 x Voron RS25 PSU brackets from…

Downloads
151
Likes
18
Rating
5
P
PrintablesLorien

BTT Manta M8P Cooling Fan Plate

The plate is available as Plain, with HevORT logo, with Voron logo, with VzBot logo and with Zero G logo. Zero G Logo shown in pictures. You can either print it the stl, makes it 3mm thick or use the dxf file to order a part cut in a…

Downloads
148
Likes
31
Rating
5
P
PrintablesKenneth Walters

Manta M8P - Fan Mount Heatset Remix

Modified fan mount for using M3 brass inserts

Downloads
141
Likes
16
Rating
0
P
PrintablesNadir @ CN3D

BTT Manta M8P V1.0 3D Model (99% Accurate)

BTT Manta M8P V1.0 – Simplified CAD Model This is a one-piece CAD model of the BTT Manta M8P V1.0 MCU . Unlike the official model released by BTT (which includes all components and fine details), this version is a lightweight, simplified…

Downloads
138
Likes
15
Rating
0
P
PrintablesHerrDirektor

Manta M8P vertical din rail mount

I remixed from this model from: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount I just changed the screw positions to match the manta holes. Print Settings - Voron PIF: Layer…

Downloads
137
Likes
22
Rating
0
P
PrintablesLuděk H

BTT Manta M8P v2.0 low height dinrail mount for M3 inserts

⌀4,22 mm holes for ⌀5mm M3 inserts. For completion i used M3x10 bolts and drilled rubber stoppers from rails as spacers.

Downloads
128
Likes
11
Rating
5
P
PrintablesLin Shen

BTT M8P V2.0 Cooling 2x4010

I am building my new Voron VT250 and design this cooling mod for my M8P v2.0. It can be fitted in the inverted mod for electronics as showed. The mod is inspired by an awesome mod for BTT Octopus, and using the bro's Din Clips to fix the…

Downloads
127
Likes
23
Rating
5
P
PrintablesPhantom16361

BTT TMC5160T Pro AWD + MCU Board mounting bracket for Octopus and Manta M8P

This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…

Downloads
127
Likes
32
Rating
0
P
PrintablesMzTechnology97

BTT Manta M8P Cooling D3D Design Logo For Creality K1/K1Max [UPDATED]

Boom: 3 - 5010 Fan 1 - 4010 Fan 3 - M3x8 SHCS ( Mount Bracket to M8P) 15 - M3x16 SHCS or ISO 7380 (Fan) 15 - M3x4 OD 5 Heat Inserts (Fan) 3- M2.5x10mm SCHS (CB2) Note: updated model to correct some errors on the fixing holes

Downloads
125
Likes
37
Rating
0
P
Printablessimple3d

m8p Pavan

m8p Pavan M8P Pavan - BTT Manta M8P Fan Mount for Cooling Stepper Drivers Features Designed to fit and cool the Manta M8P stepper motor drivers and CB/CM4 module. Fans: Two 5010 fans for the stepper motor drivers and one 4010 fan for the…

Downloads
121
Likes
16
Rating
5
P
PrintablesSSerpente

Manta m8p cooling shroud

Cooling shroud for Manta m8p that uses 4 4010 fans and m3 heat inserts. Made this because I didn't found what I wanted …. My goal was to make it simple , don't use the cb1 bolts for fixing the shroud , cover all drivers , have access to…

Downloads
118
Likes
13
Rating
0

Fan Mount for BTT Manta M8P

This is a fan mounting board for the BTT Manta M8P motherboard. It holds 2 - 60mm and 1 - 40mm fans.

Downloads
108
Likes
9
Rating
5
P
PrintablesxXDFAXx

Sovol SV08 Manta M8P V2 2020 Mount

This Manta M8P V2 mount should fit the V1 with minor clearancing. I added more material around the mounting locations for M3 heat inserts. I also changed the 2020 mounting to M3 size but that can easily be edited back to the original size…

Downloads
95
Likes
31
Rating
0
P
PrintablesRyguyy46

Case for Manta M8P and PI TFT70 on Ender 5 Plus

Decided to try my hand at designing my own model. Was needing a case for both of these components, I am slowly working my way to building the Mercury one.1. Only designs I could find required me to cut my stock enclosure, which I did not…

Downloads
93
Likes
12
Rating
0
P
PrintablesCR89

Manta M8P Coolingplate for 60mm and 80mm Fan

Manta M8P Coolingplate with 60x60 an 80x80 fan. You will need: 8x M3 Heat-Inserts 2x M3x45mm Screws 1x M3x40mm Screw 8x M3x8mm Screws 1x 60x60 fan 1x 80x80 fan

Downloads
91
Likes
10
Rating
0
P
PrintablesJSA1031

Big Tree Tech Manta M8pCase

OK….. removing the work in progress status as everything fits and Manta M8P is installed and working. I made some tweaks to the holes for the board. The board mounts and the lower fan mounts take a M3 screw, and all other items use m2 at…

Downloads
84
Likes
9
Rating
0

BTT Manta M8P Mount for Ender 3 NG

Mount to install a BTT Manta M8P to the default din rail clips of the Ender 3 NG. Uses M3x6 SHCS everywhere.

Downloads
83
Likes
14
Rating
0
P
PrintablesTetsu

MANTA M8P XY Cooling

The best cooling for hot drivers! BOM 1x 4010 radial fan 4x M2x10 screw

Downloads
80
Likes
16
Rating
5
P
PrintablesNicole

M8P Low-Profile DIN Rail Mount (Full/Combined)

You'll need: 4x M3x4x5 heat set inserts (if printing the Insert version) 4x M3 spacers 4x M3x6mm or M3x8mm screws

Downloads
78
Likes
13
Rating
5
P
PrintablesAndersen

BTT M8P v2.0 cooling dock/fan mount v1.1

add reinforcement bar for driver side wall add top screw for easy remove fan mount to plug/unplug connector

Downloads
76
Likes
8
Rating
0
P
PrintablesRoyalNautilus

Manta M8P V2.0 E3NG 1.2 DIN Mount

A DIN Rail mount for the Manta M8P v2.0, designed to optimize space in the back of the E3NG electronics backpack. Release notes v2: corrected placement of lower left hole, misread a dimension on the M8P v2.0 CAD file. Required materials…

Downloads
75
Likes
8
Rating
0
P
PrintablesAlex3DLabs

FlashForge Creator Pro 2 BTT Manta M8P Adapter Mount

Description I created the FlashForge Creator Pro 2 mount and mixed in the BTT Manta M8P mount to it. I wanted to install Klipper on the Creator Pro 2 and this was easier than trying to get it working on the stock CP2 main board. This…

Downloads
72
Likes
6
Rating
0
P
Printableslogisk

Manta M8P mount with External Driver mounts

Mount for Manta M8P for DIN-rail with 4x mellows Fly HV-TMC5160 Pro External Drivers Using Voron heat inserts for board mount. External drivers screw directly into plastic. Modified using TinkerCAD

Downloads
61
Likes
7
Rating
0

Shock Mount For Fifine AM8PROT Microphone

Welcome! The Fifne AM8PROT mic is a great budget option. I've been using mine for a while, and at the 70 USD price point with a boom arm, it's a really good budget option. But one thing was wrong with it: no shock mount. The mic is…

Downloads
60
Likes
9
Rating
5
P
PrintablesLocki

BTT Manta M8p DIN vertical horizontal holder

Universal holder for vertical or horizontal use on DIN heatset inserts Voron size M3x5x4 if printed from ABS please set size on X and Y to 101% for reduce shrinkage and nice fit can be also used with any 50 mm distance clip like one 50/55…

Downloads
58
Likes
1
Rating
0
P
Printablesbonbon

Manta M8P Cr10 smart Board adapter

Adapts the cr10 smart mounting holes to the btt manta m8p. designed to rest on original board mounting holes and use heat set inserts for the manta mount.

Downloads
57
Likes
7
Rating
0

Voron 2 case btt manta m8p

Voron 2 Enclosure – BTT Manta M8P + LS200 PSU + Dual 120mm Fans Custom 3D-printed enclosure designed for the BTT Manta M8P mainboard and LS200 power supply. This is a 7-piece modular case, designed for easy assembly and efficient cooling.…

Downloads
56
Likes
6
Rating
0
P
PrintablesNuclearKitty

BTT Manta M8P 2.0 Stepper Cooling Frame + Low profile DIN-Mount

This is a cooling frame for BigTreeTech Manta M8P 2.0 Boards. It comes in several variants and works in Voron inverted electronics compartments. There is “Regular Size” for most stepper drivers regardless of type or brand. And “Oversized”…

Downloads
55
Likes
6
Rating
0
P
Printablestransmutated

Formbot3D Xplorer Manta M8P V2 Fan Mount

UPDATE 1: I've created a skirt mod to accommodate the bigger fan if you plan on installing the electronics cabinet cover. Check it out here on printables . I love this cooler for my Voron, but it wouldn't work with the Xplorer as it is…

Downloads
50
Likes
6
Rating
0
P
PrintablesfreakyDude

Manta M8P v1.1 Mount for Sidewinder X1/X2

Sidewinder X2 Adapter for BigTreeTech Manta M8P (1.1) If you are switched to klipper3d firmware and like a all in one full integrated solution for your Artillery Sidewinder, the BigTreeTech Manta M8P is maybe that what you are looking…

Downloads
50
Likes
8
Rating
0
P
Printablestin_tad

QIDI X-CF Pro Manta M8P Board Holder Klipper Upgrade

A holder for BTT Manta M8P board for QIDI X-CF Pro to replace stock board. Can reuse stock M3 bolts for the holder and may need some more bolts for the board Remove stock fans and replace with 2 4020 fans Might need to drill 2 holes to…

Downloads
48
Likes
12
Rating
0
P
PrintablesLocki

BTT Manta M8P V2.0 Cooling 4 Fan Plate

BTT Manta M8P V2.0 Cooling 4 Fan Plate 4x DIN912 M3x35mm 4x DIN912 M3x12mm for every fan If printed from ABS please set size on X and Y to 101% for reduce shrinkage and nice fit.

Downloads
45
Likes
6
Rating
0
P
Printablesetsy etsy

Manta M8P mount an fan

Base for mounting the Manta M8P V1 board with an upper part for mounting cooling (120mm fans). Holes for screwing in M3 screws

Downloads
43
Likes
6
Rating
0
P
Printablesdaum1988

SV08 BTT Manta M8P Cooling Plate 120

I've designed a mount for an 120x15mm fan to cool the Manta M8P in my SV08. It mounts on the 4 original mountig holes of the board so it shouldn't be limited to the Sv08. You will need to have raised feet on the SV08 because the Heatsinks…

Downloads
41
Likes
7
Rating
0
P
Printableshappy_mfg.

manta m8p fan shroud

this is pretty rough so you will need to clean up the holes a little for a m3 screw, and this is only 5 drivers! no more no less lol

Downloads
39
Likes
8
Rating
0
P
Printablesjaeger

BTT Manta M8P E3NG fan mount

This is a fan mounting plate for use with a BigTreeTech Manta M8P mainboard ( https://github.com/bigtreetech/Manta-M8P ) and the Ender 3 NG conversion ( https://rh3d.xyz/ ). It was designed for the v1.0 board but might also work with the…

Downloads
37
Likes
8
Rating
0
P
PrintablesKimosabE

Din Mount - Manta M8P (Double Din)

I needed a Din mount for my Manta M8P that would span the rails rather than run along them. It was necessary to try and fit all the electronics in the bay for a Voron 250. Every mount I've come across is designed to run along the rails so…

Downloads
35
Likes
6
Rating
0
P
PrintablesEddieSha

Manta M8P/CM4- Antenna Mount

Wanted a nice clean solution for mounting an actual antenna for the CM4 on my Micron. Originally had a skirt mounted solution but it had two flaws: 1. Only worked with Micron R0 skirts 2. Every now and then the antenna would get snagged…

Downloads
34
Likes
7
Rating
0

Adapterplate original MKS board to Manat M8P (for flyingbear reborn 2)

I wanted to upgrade my flyingbear reborn2 to klipper and decided to use the manta M8P. I couldn't find an adapter to mount this on the original MKS board holder. So I did this myself. I removed the right screw of the relay and tilted it a…

Downloads
33
Likes
5
Rating
0
P
Printablesjulez85

BTT TMC5160T Plus + MCU Board mounting bracket for BTT Manta M8P V2.0

Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.

Downloads
32
Likes
2
Rating
0

Manta M8P Faceplate

For a bill of material and links to products used to make this check here: http://www.perpetualprinter.com/

Downloads
32
Likes
6
Rating
0
P
PrintablesxPakrikx

Prusa MK3s Bigtreetech Manta M8P case (Caribou remix)

Simple Caribou btt m8p case remix for mk3s. Freecad remix is a mess but its working.

Downloads
31
Likes
2
Rating
0
P
PrintablesZaid

Manta M8p din rail for Ender NG v1.2

Manta M8p din rail for Ender NG v1.2

Downloads
30
Likes
6
Rating
0
P
PrintablesDakhunter

Manta M8P/M5P Mount for XMax3

NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…

Downloads
27
Likes
6
Rating
0

BTT M8P V2.0 Mount for K1/K1C

This mount was designed for the K1/K1C with one major feature in mind. No needing to dremel your printer, this mount has the bottom fins of your printer cut out to avoid you having to grind them away. It mounts with the original screws…

Downloads
26
Likes
10
Rating
0
P
PrintablesHjort Creations

MantaM8P Adapter Plate for Modix V3 & V4 - Klipper Firmware Upgrade

Enhance your Modix V3 or V4 with our custom adapter plate, designed for seamless integration of the MantaM8P board with a CB1/CM4 module. To ensure optimal compatibility and performance, replace the existing 25mm standoffs with 4-7…

Downloads
24
Likes
3
Rating
0
P
Printableshypotesseract

Manta M8P Mounting Arms for Bastion Printer

Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)

Downloads
23
Likes
4
Rating
0
P
PrintablesCornBred89

Manta M8P Mounts

Mounts for Manta M8P, Use M3x8mm screws to mount the board.

Downloads
22
Likes
3
Rating
0
P
PrintablesRipa

Manta M8P CB1/CM4 top down screws

No supports needed, 1X inbuilt support on one leg, that needs to be removed as per images. Required Hardware: 7x M3 brass inserts, 7x M3X12 SHCS Cap screws, 1x 40mm fan, 1x DC centrifugal blower, 60×60×15 mm. Print both parts upside down,…

Downloads
22
Likes
4
Rating
0
P
PrintablesCSL 3dPrint

BTT Manta M8p fan mount

Manta m8p fans mount fir 2 5010 fans for drivers and a 4010 fan for the CB.

Downloads
21
Likes
6
Rating
0
P
PrintablesOligon Joni

Cooling the BTT Manta M8P v.2 board

I decided to install a Noctua NF-A9x14 PWM 92 mm fan to cool the BTT Manta M8P v.2 board. It cools very quietly.

Downloads
20
Likes
3
Rating
5
P
Printablessimple3d

SkirtFlow M8P – 4x3010 Side Intake Stepper Driver Cooling Duct for BTT Manta M8P

SkirtFlow M8P – 4x3010 Side Intake Stepper Driver Cooling Duct for BTT Manta M8P SkirtFlow M8P is a side-intake cooling solution for the BTT Manta M8P designed to pull cleaner air from the printer skirts rather than recirculating warmer…

Downloads
19
Likes
3
Rating
0
P
PrintablesSimonCymru

V-Core 4 Adapter BTT Manta M8P

These adaptors allow you to mount a BTT Manta M8P inside a V-Core 4 electronics enclosure. They feature the same enclosure mounting points as the stock Octopus v1.1 adaptors designed by RatRig. No special printing requirements, just print…

Downloads
17
Likes
1
Rating
0
P
PrintablesThor Sten

K1 Max Manta M8P basic frame

without places for USB and RS232 adapters, just the frame. Thats it. You dont need all that adapters when using CAN bus.

Downloads
17
Likes
6
Rating
0
P
PrintablesBeer

Manta M8P 4-Slot TMC2209 Heatsink Alignment Jig

This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…

Downloads
16
Likes
2
Rating
0
P
Printablesjunakya

Manta M8P 2.0 Mounting Bracket for Rat Rig V-Core 4

Not tested yet, but modeled based on oficial files, should fit without problem. Print with at least PETG for heat resistance just to be sure. Needs m3 threaded heat-inserts just like the original part. If you want to modify or remix this…

Downloads
15
Likes
4
Rating
0
P
PrintablesBlueTip

Qidi Q2 MCU Adapter Brackets - BTT Manta M8P

Qidi Q2 MCU Adapter Brackets - BTT Manta M8P This bracket was created to swap the Qidi Q2 stock MCU with a BTT Manta M8P as part of a modification / conversion of my Qidi Q2 to full opensource compatibility.

Downloads
15
Likes
11
Rating
0
P
PrintablesEdwinL

Remix of 120mm fan mount for BTT Manta M8P using shorter screws

I like the original model but I didn't have screws long enough to use it

Downloads
15
Likes
4
Rating
0
P
PrintablesITSJUSTME

K1 Max K1C K1 SE K1 to Manta M8P

Printed in PC-ABS with rafts to reduce warping.

Downloads
15
Likes
8
Rating
0
P
Printablesa123qwertz567

Bigtreetech Manta M8P frame with fan bracket

This is a frame for a Bigtreetech Manta M8P mainboard. If desired you can get a frame with fan brackets attached. Originally the brackets are designed for the Noctua NF-A9x14 and Noctua NF-A6x25 but other fans might fit as well. The…

Downloads
14
Likes
2
Rating
0
P
PrintablesPotatobattery

BTT Manta M8P Stepper Fan Plate 40mm

Plate to hold 3 40mm fans to cool the stepper drivers of the BTT Manta M8P

Downloads
13
Likes
5
Rating
0
P
PrintablesJaxperez

SV02 controller board mounting for Manta M8P

This board can be mounted two ways with the original power supply. This is to add the Manta M8P board to the Sovol SV02 for better control and for klipper. I will be working on the fan attachment later for 5051 fans. you will have to use…

Downloads
12
Likes
3
Rating
0
P
PrintablesNC0C0C

M8P 6020 cooling fan plate

I have two old 6020 fans, to get them back in operation, I redesigned the model so that the 6020 fans can cool the CB1 and first 5-6 TMC drivers.

Downloads
11
Likes
0
Rating
0
P
Printablesthetallpaul

BTT Manta M8P Dual 60mm fanplate

Redesigned to mount dual 60mm fans. I'm using GDSTime 60mm fans, which came with fan guards. You will need the standoffs and the din rail mounts from the original. Also fitted Nadir's SV08 feet to give enough clearance and airflow

Downloads
6
Likes
3
Rating
0
P
PrintablesNotactJack

PCB Mount for Big Tree Tech Manta M8P Ver 1.0 Vertical

Hello, I printed the model from ABS to withstand warm temps. I am building a VZBOT 330 AWD and I wanted to mount the BTT Manta M8P vertically. I could not find a mount that was vertically mounted and included easy to find din rail mounts.…

Downloads
5
Likes
1
Rating
0
P
PrintablesBlueTip

BTT Manta M8P Stepper Fan Plate 40mm (w/ extra features)

BTT Manta M8P Stepper Fan Plate 40mm with following changes: cable tie points standoffs (no 4th standoff as it often interferes with the DSI connector) place to fasten x4 fan splitter Note: You can also mount the fans beneath the bracket…

Downloads
5
Likes
1
Rating
0
P
PrintablesValerii

Kobra GO & NEO Electronics Enclosure — Manta M8P Edition

A purpose-built electronics enclosure for the Anycubic Kobra Go and Kobra Neo 3D printers, designed to house the BIGTREETECH Manta M8P mainboard. This case replaces the stock control box with a more robust, ventilated, and modular housing…

Downloads
3
Likes
0
Rating
0
P
PrintablesEdoGuerra

Manta M8P v1.1/v2 Fan Cover With Airduct

Cooling cover for the Manta M8P v1.1/v2 board, designed for motor drivers and the SoC. The system uses a 5015 blower fan to cool the motor drivers and a 60x60x10 fan to cool the SoC and the CB1/CB2/CM4 module. HW: - 6x M3 heatsets; - 1x…

Downloads
1
Likes
0
Rating
0