766 models
Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…
Fits well. Could use some tightening on the vertical by a few mm. https://www.3dprintlog.com/prints/264099 https://www.tinkercad.com/things/5WkBTqhKpWe-3-key-wknob-macro-keycase
Although I picked up the Alice layout almost right away, I found the macro keys are in the way, adding no value. So at least for now, I've designed and printed a cover for them. Few things: switches have to be removed because they're…
Dmitry made a great model and supplied the Marco code for Klipper. I just made it work for the AI3M bed! For macro setup, look back at Dmitry post. Note: You may need to take off the bed to get it on. [gcode_macro WIPE] description: Wipe…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
The Macro F is a full shell conversion kit for the Nintendo DS Lite. It has a unique cut out to show the Game Boy Advance cartridge label and supports up to two Nintendo Switch speakers. The Macro F also uses the Boxi Pixel Macro Glass…
## APPARENTLY THE FAST_START MACRO DOESN’T WORK WITH QIDI BOX. FW 1.7+ can also cause issues. Sorry. ## ## NEW in v3.5: PRINT_START_COOL to circumvent the common heat based Z issues. ## There's a lot to improve in the stock Plus 4…
See below the .cfg attached. ;) on to the Other Files section 🛠 Sovol SV08 Klipper Macros: Tap Z-Offset, Nozzle Cleaning & Adaptive Purge Thanks to Vlad for the brilliant firmware that enables the BTT Eddy sensor to support tap-style…
This is a remix of an existing stream deck! This design was inspired by DaveM ( https://www.thingiverse.com/DaveM/about ). Check out his Version of the stream deck! Thingiverse: https://www.thingiverse.com/thing:2822140 His website:…
This is a gameboy macro face plate for a ds lite. It comes in 3 flavors one with the touch layer,one without and one with the obirux screen lens The touch layer face plate comes with 2 thin covers to go over the dpad and buttons. Best to…
Update: 7/7/2022 – Alright, this is a big one! All of the rails have been updated, new tactile surfaces have been added, and every rail has two variants: a default “free-spin" one, and a clicky one. All the rails have been rotated so that…
After printing and making many other GB Macro cases out there, I decided to challenge myself and design my own with features I wished to see in others. NO stock self-threading hardware (tiny and strip easily) NO battery door (I rarely…
The VOID9 Macropad is a handwired 3x3 pad that uses a Pro Micro as a controller. Two versions for the top case are included, one of them is flat, the other has a 4mm fillet. There are two versions for the bottom case as well, a flat one,…
Update: Added 3 versions - One with a hole for the STEMMA port, One with a hole for the STEMMA and Reset, and a last one that has space for a Pimoroni trackball. This is a form fitting case I designed for the Adafruit Macropad. Its…
This is the face plate for the gameboy macro ds lite screen switch mod. 2 Options for download, One with 1 button and the other with 3 buttons. Print with support and 75% infill to give the screw posts some help. More info about the mod…
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
I searched for a solution that isn't mounted to the bed (for higher acceleration) and not to the X-gantry (for full X-range of motion), so I created a nozzle brush for the Z-gantry with a fast magnetically attachable purge bucket. When…
Adapter to use Canon EF/EF-S mount lenses with EF-M cameras. Doubles as an adjustable extension tube with 0-10mm extension range, perfect for extreme close-ups with ultra wide-angle lenses. Why not use a regular EF/EF-M adapter with a…
A little handwired macropad that you can take anywhere! Includes a rotary encoder slot perfect for volume control, page scrolling, and more. Note: EC11 rotary encoder is free floating therefore you may want to glue your encoder in or…
Apple's new series inspired a lot of artists already. I have modeled this in Blender and made it 3d printable. The biggest part, the four desks together fit exactly on a Prusa Mini. The tiny parts should be printed on a resin printer. But…
1-key cherry mx macro keyboard for use with the digispark, because sometimes, only one key is needed.
VM's macro keyboard This project is developed for Arduino Micro boards and it functions as a macro keyboard with rotary encoder . Eight mechanical cherry MX keys can be assigned various functions (writing text, combination and sequences…
I really liked the exosuits from nostalgic robotech cyclones. So I just tinkercaded them with lucky13's easy skins. It was fun, but time consuming. And I haven't finished the legs yet. So maybe in the summer. Also, I normally print this…
This set of extension tubes enables macro photography using your existing Sony E/FE lenses on your Sony E/FE mirrorless camera. I've provided tubes in 7mm, 12mm, 24mm and 35mm lengths Since there are no electrical contacts, you won't be…
This is a remix of vmensik's VM's macro keyboard. I didn't really like the rough look on the top so the model was completely redesigned to remove the ridge around the knob so that it can be printed top down without supports. The key…
The work I made this time is a macro keyboard (9Key, Knob) I combined the One-Key keyboard and the volume controller I made in the last work. made it for Mac, but if you modify the Arduino code, it can also be used for Windows, and you…
New and improved Gameboy macro XL face plate. Ive added L and R button pivot points and spring holders. Print it face down without support with 75% infill to add strength to the screw posts. Use the original screws from a DS and use the…
You can follow this guide for programming the arduino : https://www.partsnotincluded.com/diy-stream-deck-mini-macro-keyboard/ I have added a blank keycap for customisation Hardware needed: 9 * Cheery MX key 6 * M3 Screw 6 * M3 insert 1 *…
Use this template to remove the material necessary to accommodate a manual safety. The XMacro has a thicker frame than the normal 365, so I remixed the template to widen it the necessary amount. Just print the model (I recommend 4 copies…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my new Neopixel LED Top Hat Mod ! Add lights to the very top of your printer so you can easily see what its doing from a distance or in a busy room/farm! These…
Baseplate adapter to make 10rd p365 magazines compatible with the macro grip. Mainly designed for compliance in 10rd limited states. Can be printed standing up, or on its side. Recommended 4+ walls.
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
The VOID16 Macropad is a handwired 4x4 pad that uses a Pro Micro as a controller. Bill of materials Redux 6 x M2x3x3.5 OD heat inserts ( aliexpress ) 4 x M2x10 Allen head screws ( aliexpress ) 2 x M2x6 Countersunk screws ( aliexpress )…
This will fit Chery MX Keys and wired to a Raspberry Pi Pico board so that you can have 12 keys used either as a Stream Deck or Mini Macro Keyboard. This is a Remix of: https://www.thingiverse.com/thing:2822140 I wanted to make the…
Remix of VOID9 macropad with 4 columns and encoder . Keycaps are remixed from one of rsheldiii Keycaps and needs support for center piece. Code for CircuitPython can be found on github: https://github.com/Karolis92/pico-macropad
This is a design for a "Stream Cheap", an inexpensive DIY version of the Elgato Stream Deck. Although I made this to take the place of a Stream Deck, it's really a mini macro keyboard that can be used as a hotkey board for any program.…
Send a mail at [email protected] to purchase the kit for 45$ it includes a build guide, schematics, code , and help via email Fill out this form with some basic info and get a discount of 10%…
Hello printing enthusiasts, Did you know that the Elegoo Neptune 4 Pro doesn't just have one, but two heated bed zones? However, Elegoo suggests that we all switch to the included outdated Cura Slicer to make use of this feature. Well, I,…
This is a Gameboy Macro XL face plate, It allows you to turn a broken nintendo DS phat into a gameboy advance. You can keep the touch screen layer or remove it to improve the screen clarity. It has room for a front facing speaker that is…
C/CS Mount Extension Tube (8mm to 65mm) for Microscope, Raspberry Pi HQ Camera, TV Lens, Macro, etc. Print at 0.1mm layer height for best results. No supports needed for printing. May need brim when printing long extension tubes.…
This is a Star Wars theme inspired device that you can connect to your computer and it will act as a fully functional HID keyboard. Features: 5 configurable buttons A safety switch with a safety LED 2 additional LEDs 3D-printable case You…
A small and easy to print macro pad based on a Raspberry Pi PICO. I'm using it in the office starting some regularly needed scripts or starting Teams Call with colleagues. It is a remix of three different thingiverse prints I combined.…
Start by making my 4x microscope adapter for your camera: https://www.printables.com/prints/143754-microscope-adapter-for-4x-macro-photography-with-s Then add this particular 4x objective (only this one is supported) to it:…
This is a 6 button macro pad that can either be used on a PC as a basic macro pad, or as an IoT switchboard to run home automations or send notifications. This macro pad is based off of an ESP32-S2 Mini and x6 standard mechanical keyboard…
For the brains of the macro pad i used a C-Duino. https://github.com/mustacheman6000/C-Duino It's a Pro Micro clone with a Usb-C port. For the software i first made a keyboard layout with keyboard-layout-editor.com and then used…
9 key + rotary encoder macropad utilizing a raspberry pi pico Instructions: https://jasongiroux.com/2023/07/16/macro-pad/ code: https://github.com/jaysongiroux/pico-macro-pad
A customizable DIY macro keyboard with RGB backlight and USB C, which uses cherry mx keys. Features RGB backlight Fully customizable Compatible with all cherry mx keycaps USB C Simple assembly Cover for transport included No supports…
Designed some key caps for this macro keypad I bought online. Should fit any standard switch but is rather low profile. Best printed either face down or with supports face up.
This lens only works at really close focal ranges and has a small aperture. Great for vintage macro shots though!
Recent updates 2021-06-29 Here's an Autohotkey example to send the name of the active window to the Arduino 2021-06-12 added the very basic Arduino Sketch 2021-06-08 first upload. Files: V0 6-Key super slim Macro KeyPad Proudly designed…
Required hardware Raspberry Pi Pico (RP2040) microcontroller board USB cable (as it has to be cut and soldered a USB 2.0 is preferred, because it only has 4 wires) 4x Cherry MX key switches or other with similar size 4x Keycaps (or print…
The STL was added just to be able to create this repository.! Using this Macro i solve 2 thinks 1. Im sure that the bet it will not get warped/taco because it is heated gradually 2. Eddy will not be heated up because it is moved out of…
3D printable enclosure for the Adafruit Macropad PCB, inspired by the Nuphy Halo 96 keyboard. Needed: 4x M3x8 screws Adafruit Macropad Print: Print all 3 parts facing down (as shown on pic), only the PCB bracket need support Assembly:…
Canon RF 35mm f/1.8 Macro IS STM Lens Hood. Two styles. Full and tulip. • Snaps on and holds tight. • Reversible so you can store backwards on lens. • Access tabs on either side in case you need help removing. I suggest using a soft…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
This is a 3d printed mechanical macropad that I designed as a gift for my cousin. I will post a youtube link soon with a video tutorial on how to build one of these, and how to program it. Every key can be programmed to any key on a…
For soldering instruction check out: https://www.printables.com/model/269757-stream-deck-marco-keyboard Make a test print of the base to ensure that your pro micro fit is snug. I did not have a need to glue mine. AutoHotKey Script Read…
We bought this game and wanted something to keep track of each scene. At first we used glass gems, but they distort the image and make it harder to see. These simple rings help organize the case clearly and simply. I printed about 35 and…
3-key Cherry MX macro keyboard designed for the micro USB version of the Digispark. Make sure everything works before pushing in the Digispark. Testing code: include "DigiKeyboard.h" void setup() { pinMode(0, INPUT); pinMode(1, INPUT);…
Working on a set of caps to use on a DIY Macro pad / stream deck. Print Settings Infill: 100 Notes: Printed caps in clear and did a filament change in first layer of icons remix of https://www.thingiverse.com/thing:3630367
Helpful markers for tracking the dizzying number of suspects and clues. Update: Now with hexagon markers!
Check the video for more details: https://youtu.be/BcXycScePHM Printed in PLA, 0.2mm layer height, 25% infill Shopping list: Arduino Pro Micro USB C: https://s.click.aliexpress.com/e/_Dehy8kr Microswitch Used for Reset:…
3D Print your Macro Photography In Brief This adaptor allows you to take macro photographs with Canon EF or EFS lenses. It was designed with kit zooms in mind. All examples use a kit 18-55mm kit zoom. Heavier lenses may need support. The…
A recreation of the Robotech/Macross GU-11 gunpod used by the VF-1 series Variable Fighters (Valkyries). I used a schematic image I found online and created this from scratch, using additional reference images when necessary. I've…
This model is compatible with the lego system.
This is a small macropad called “Pikku”. It's powered by Raspberry Pi Pico and coded with CircuitPython. See more info https://codeof.me/pikku-raspberry-pi-pico-powered-macropad Macropad consists of three components. All components can be…
I tried this adapter ( https://www.printables.com/de/model/451842-mftmicro-four-thirds-to-m42-adapter ) first, but it wobbled, the flange focal distance was completely wrong, you could easily overtighten it and the aperture pin was not…
This is an improved version of the Nozzle Cleaner for the Ender 3 V3 SE (A1/A1 mini combs) , optimized for easier use and compatibility with Klipper firmware. This cleaner works efficiently with silicone combs to maintain a clean nozzle…
Sharkropad is an open-source hotswappable macropad supporting QMK/VIA. The project includes the 3d printed parts, a custom pcb and QMK/VIA firmware. Features: USB-C with ESD Protection Rotary Encoder OLED Display Customizable RGB Lighting…
A simple , easy to print macro diffuser designed for a MeiKe MK-14EXT ring flash. Print instructions: The “diffuser_white” part should be printed with white mate filament in “ Λ” orientation , “difuser_black” in black or grey in “V”…
An adapter for mounting a 20mm ZnSe lens to the Tooltop T7 thermal imaging camera dongle. This lens works very well for PCBs and close-ups: 101.6mm 20mm ZnSe Lens Assemble with M2*4mm screws, M2*2.5*3.2 metal threaded inserts and a…
This is yet another Macro Keyboard / Stream Deck! There are plenty of awesome designs out there and many on Thingiverse, but none that were exactly what I was looking for in a macro keyboard. The general design for the Teensy StreamDeck…
I created this slider for macro photography. It uses widely available 3D printing hardware for the most part, and it's fully open source! You can see the design workflow and the slider in action here: The best part of using a 2020…
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. Cute and…
Remixed the excellent design from stingray127 with a few tweaks in order to make installation slightly easier. Added an angle for the horizontal wire so that they stay put and avoid the vertical wires of the matrix. With the above…
Hi, this is my version of the macro converter (revert lens) for Nikon with F mount. It is designed for 52 mm lenses, tested with: Nikon AF-S DX NIKKOR 18-55MM Nikon AF NIKKOR 50mm f/1.8D Part 1: You need to put a UV filter on the one side…
The Collection This is a collection of multi-color printed macro keys. Beginning with the “basic” flat keycap, I made two STL models for each key using OmniGraffle, a web-based PNG to STL converter, and Tinkercad. How to prepare gcode Set…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v350 flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with both…
This adapter allows you to use your Sony E/FE lenses on your Micro Four Thirds camera for macro photography. Because of the difference in the depths of the mounts for Sony and M4/3, and the thickness of this adapter, this adapter is…
Making a Macro Pad without using Multiplexing. This macro pad has 4 separate layouts with 9 buttons on each for a total of 36 extra buttons. It also has a rotary encoder for volume and play/pause buttons. These are designed to be printed…
This macropad is a great introduction into programming and soldering. Follow the guide on tomshardware.com/how-to/raspberry-pi-pico-powered-stream-deck to for example wiring and software. Sample code has been provided - in the link above.…
A Pro Micro-based Macropad with 12 cherry-style keyboard switches, a rotary encoder and a slide potentiometer. Print instructions Orientations should be obvious. For best surface finish, print with 0-angle rectilinear bottom layers.
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
Extension tube for Nikon F mount. Minimal hardware required only for aperture control. There is a groove on the camera side to allow for the lock to keep it in place, this same lock will with a bit of filament lock the lens as well. Keep…
25 Button MACRO Keypad - controller with an Arduino Pro Micro. Uses keyboard switches, a reset button, and a LED. Summary: I designed this to be able to assign keyboard shortcuts for different software that I use on a regular basis. This…
👋 Introduction In Macro Photography, you rarely have enough light as you need to close the aperture very far in order to get enough depth of field. To counteract this, many photographers use a flash to illuminate their scenes.…
This is a combination of of two different models: Pico Mpad and 6-Key Macro Keyboard . here is a excellent tutorial of how to set it up: https://www.tomshardware.com/how-to/raspberry-pi-pico-powered-stream-deck
Decided to hand-wire my own macro-pad and ended up creating a parametric design in Fusion 360. You can change the number of keys on the X- and Y-axes using the parameter function in Fusion 360. You can find the Parameters under the…
None of the locking keys of 1913 style provides a great fit for my Streamlight TLR-7X on my Sig Sauer P365 XMacro. So I made one for myself. If need to deal with real recoil obviously you'd want to print in some durable material. I…
MacroPad DIY Sous Arduino Pro Micro By Tidelite 8 Touches, 2 Contrôles audio, 1 Encodeur Rotatif à interrupteur. Vidéo YouTube : Matériel requis : PCB Custom (Gerber dans les fichiers) 8 Switchs Low Profile, 2 Potentiomètre, 1 Encodeur…
6-Key Macro Keyboard using a Raspberry Pi Pico to control Programmed in CircuitPython . Included python code has macros for freeCAD and Ansys Spaceclaim To modify change the keymap dictionaries using new macro keycodes Included freeCAD…
Please use a not-so-stiff filament, like ASA or PETG, even flexibles work. I recommend using a very black and not so shiny filament. 0.15mm layerheight is also enough.
10 button box with a layer switch on the side that enables 10 different keys. Originally designed for a sim racing rig. The button box is designed to use 24mm arcade buttons. The included arcade switch model was created by Cults 3D user…
New and improved Gameboy macro XL 2 button face plate. Ive added L and R button pivot points and spring holders. Print it face down without support with 75% infill to add strength to the screw posts. Use the original screws from a DS and…
Remix of Bento Mechanical Keyboard Macropad on thingiverse resized for Pi Pico www.thingiverse.com/thing:4416966
I think I've finalized this. I made a version that fits both a p320 and a p365 xmacro (the regular p365 doesn't have a pic rail unless you add something - I don't have this attachment). In order to work with both, it had to be taller. And…
This variable-length extension tube allows you to mount a Canon EF/EF-S lens to a Sony F/FE mount camera. When you twist the middle section of the tube, it expands to vary between 50mm and 150mm of effective extension. When used with a…
This variable-length extension tube allows you to mount a Canon EF/EF-S lens to a Canon full-frame or crop camera. When you twist the middle section of the tube, it expands to vary between 62mm and 150mm of extension. When used with a…
![Macro-Jack [Clicky Rails Update] (7/7/2022)](https://media.printables.com/media/prints/231914/images/2128327_60ea8a33-1b2f-40ad-8ae0-4244c81783f2/20220701_120856.jpg)
