Search results: mobula

Sort order

155 models

P
Printableso._sim_.o

Mobula 8 Alternative Battery Mount

The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…

Downloads
276
Likes
20
Rating
5
P
PrintablesJadozub

Mobula 8 & Battery Rugged Case

As tough as the Mobula 8 is, it won't probably survive throwing it into a backpack to take it with you. This case allows you to do exactly that, while also protecting your whoop from some rain or mud. Fits analog or Walksnial 1s Mobula 8…

Downloads
220
Likes
15
Rating
5
P
PrintablesInternalError33

Mobula 8 Replacement Frame

***This Frame is fairly fragile. It will not survive moderate impacts*** I wanted to experiment with 3D Printed frames after snapping one of the plastic pins on my Mobula 8 Frame. This is my first attempt (well, first attempt that…

Downloads
1,658
Likes
96
Rating
4
P
PrintablesLumbaLumba

Walksnail 1S Lite Kit Canopy 25.5х25.5 (mobula, meteor etc)

25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30

Downloads
555
Likes
43
Rating
5
P
PrintablesAlex Veden

Happymodel Mobula7 V2 frame / 75mm tinywhoop

In case somebody needs a 3d model of mob7 frame for making custom canopy or whatever. The model is accurate to the production frame except symmetrical motor arms and straight duct profile.

Downloads
536
Likes
31
Rating
0
P
PrintablesRodrigo Sclosa

Mobula 6 Demon Canopy

I designed this new canopy for Mobula 6 to solve some problems: It has support for copper antenna on the rear. Upgrade recommended for yours. Support for a small 9mm buzzer. As it is very small, a buzzer is useful to locate it if it falls…

Downloads
530
Likes
35
Rating
5
P
PrintablesTokyo_Dom

Mobula6 canopy Pinch camera adapter

This is an improved version of my Mobula6 canopy Pinch Camera adapter. This one uses the camera-holding design from RAB's awesome folded canopy, but I wanted to have the protection, light weight and instant angle adjustability of the…

Downloads
324
Likes
25
Rating
0
P
PrintablesUbermeisters

Mobula 7 Replacement Frame

printable without supports. may need to re-drill the circuit board mounting screw holes, as they are only 1mm diameter. The STP file contains separate sub objects which are not joined to each other. you will need to perform a Boolean…

Downloads
322
Likes
19
Rating
0
P
Printablessykefpv

Mobula 8 frame

Replacement frame for mobula8. This frame is not bulletproof, but should take decent hits without braking instantly. I've made few modifications to stiffen up the frame. Weight is around 17g (original 11g), so sligthly heavier than…

Downloads
318
Likes
21
Rating
5
P
PrintablesGurpartap Singh

Mobula 8 Camera canopy

Modula 8 camera canopy - with and without rumcamthumb pro mount. supported camera angles upto 30deg. Let me know if you need one for more camera rotatiion. Support can be a little tricky to remove but hang in there.

Downloads
310
Likes
22
Rating
0
P
Printablesearthgrazer

Mobula8 Battery Holder

Mobula8 Battery Holder The original Mob8's frame has a very tight fit for the higher capacity 2S batteries, often requiring force to clear some parts of the frame and the micro USB jack. I designed this battery holder mod for the Mobula8…

Downloads
300
Likes
22
Rating
0
P
PrintablesLému

Mobula 8 - Travel Case

A carrying case for the Mobula 8 drone. I wanted a carrying case that didn't take up too much space, but was sturdy and secure enough that I wouldn't have to worry about having my drone inside, with foam to absorb any shocks. I used the…

Downloads
262
Likes
32
Rating
5
P
PrintablesLému

Mobula 8 - Battery Clip

The mobula 8 is a good drone, but its battery attachment system is far too limiting. To increase the choice of drone batteries that can be used with the mobula 8, we need to make a few adaptations. I've designed a very simple and flexible…

Downloads
261
Likes
21
Rating
5
P
PrintablesBURDFAMFPV

mobula 8 dji 04 canopy

dji 04 lite canopy for mobula 8

Downloads
247
Likes
18
Rating
0
P
PrintablesGeekMystique

Easy print Moblite / Mobula canopy for Caddx Ant Lite

Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.

Downloads
239
Likes
27
Rating
4
P
PrintablesSSX556

M2 Caddx Ant Lite Adapter for Mobula6 & 7 1S canopy

A small adapter clip to screw a Caddx Ant Lite into a Mobula6/7/8 canopy using M2x4 screws and M2x3 heat inserts. M2x3 heat inserts from cnckitchen Be careful while melting the inserts in as the plastic walls are very thin. I added a…

Downloads
239
Likes
25
Rating
5
P
PrintablesErdaPerda

Mobula 7 Rugged Box

Better looking AND more practical box for your tinywhoop. You might need to cut corners on the foam insert for proper fit. You will need: 4x M3x34 nut (can be longer) 4x M3 nylon bolt Optional parts: TPU part for better seal. ( not…

Downloads
236
Likes
34
Rating
5
P
PrintablesYoufu

Happymodel Mobula 7 open prop frame conversion

Happymodel Mobula7 1s tinywhoop open prop conversion frame inspired by the flywoo firefly nano baby frame. Weighs about a 4g, 1g lighter than the happymodel ducted frame. Very strong, pretty much will never break as this frame with the…

Downloads
229
Likes
34
Rating
5
P
Printablesfpvgio

Mobula8 DJI 04 Lite Canopy

tpu 50%infill - weight with 04lite = 21g. 0.2mm layer height organic supports should fit original 04 lite camera faceplate & and axis flying 14mm camera housing. install your camera first and run a small zip tie through the spaces at the…

Downloads
224
Likes
18
Rating
5
P
PrintablesTyp_im_dunkelln

75mm Tiny whoop (mobula7/meteor75) canopy for big-lens 14x14 camera like a foxeer Toothless 2 nano (starlight)

1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…

Downloads
212
Likes
20
Rating
0
P
PrintablesBigDan1190

Mobula 8 battery tray

The batteries I use don't fit the stock holder so I cut the horizontal tabs out, put this tray in (with a bit of sticky battery pad) and looped some velcro through the vertical tabs. This has been through some big crashes and battery…

Downloads
209
Likes
32
Rating
5
P
PrintablesLukasz M

O4 canopy for Mobula 8

This is a O4 canopy for Mobula 8. Recommended printing with TPU 68D filament (I printed with TPU for AMS). I recommend setting 100% infill and using tree supports. When printed with PLA and subjected to a crash, it breaks (tested). Allows…

Downloads
207
Likes
3
Rating
0
P
Printablesdansharpy

Mobula 8 Hard Case

This is a hard case I designed for my new Mobula 8 Tiny Whoop Drone. It uses the foam out of the box the drone came in. The latch holds the case closed and is adjustable. I printed this in abs but should be fine in pretty much any…

Downloads
196
Likes
15
Rating
0
P
Printableslameandboard

Mobula 8 - o4 lite canopy - remix of burdfamfpv's

tested and works great! I just added a higher angle version….

Downloads
190
Likes
6
Rating
0
P
PrintablesSTomHacks

Battery holder for HappyModel Mobula 7

I remixed a battery holder for the tinywhoop drone Mobula 7 1S from Happymodel. With my model you can carry a 500mAh Tattu 1S and the model will be below 2g. I printed with 0.24mm layer height using Red PLA+ from CC3D

Downloads
188
Likes
22
Rating
4
P
Printablesyinyang08

O4 Mobula Canopy Adapter

Remix of Krhom's first O4 mount. No supports needed, printed in TPU 95A, works with the OEM self-tapping screws, maintains some camera tilt options. You do need to trim the canopy arms around the USB-C and the Digital port so they're not…

Downloads
187
Likes
15
Rating
5
P
PrintablesRACBOTS

Tiny Whoop Canopy Mobula 6

Canopy para tiny whoop Mobula 6 en filamento flexible TPU en diferentes diseños con orejas, tiburón y simple. Especificaciones: Para imprimir de manera adecuada el filamento flexible TPU, se recomienda usar una impresora 3D de extrusor…

Downloads
185
Likes
22
Rating
0
P
PrintablesTheKiter

Adaption Walksnail Mini 1s auf Mobula 8 Frame

Habe ein paar Teile gemacht, um für meinen Mobula 8 ein Walksnail Avtar mini 1s zu adaptieren. Der Mobula kam mit dem Frame für das DJI O3 light, ich wollte das aber mit dem Mini 1s von Walksnail ausrüsten. Nach einem ersten Versuch mit…

Downloads
181
Likes
14
Rating
0
P
Printablesschmufu-3d

Mobula 8 Gopro like mount for light Cameras

A GoPro like mount for the Happymodel Mobula8. It can be used to mount a light camera like the Runcam Thumb or Thumb Pro to the Mobula8 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Supports: Yes Resolution: 0.20 mm…

Downloads
177
Likes
13
Rating
0
P
PrintablesCoolShablul

Mobula 8 case

Remix for woodprop's mobula 7 case from thingyverse (https://tinyurl.com/2pue85ds), used 5x3mm magnets and filament piece for hinge. used velcro to attach batteries to top of the case.

Downloads
171
Likes
26
Rating
0
P
PrintablesStelzenbach

Mobula8 Case

Printed in PETG 0.2mm

Downloads
160
Likes
15
Rating
5
P
PrintablesG4ZO

mobula 7 canopy

1mm wall thickness It is recommended to print in resin but should also work fine in FDM. Suitable for Happymodel Ant camera (14 mm wide). Mount hole size: 25.5mm*25.5mm

Downloads
158
Likes
9
Rating
0
P
PrintablesJaegermeister

Mobula 7 Upgrade frame

This frame can be used with Mobula 7 parts. Canopy and batterystrap needs to printed in flex filement. Print Settings Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: does'nt matter PLA Category: R/C Vehicles

Downloads
156
Likes
21
Rating
5
P
PrintablesCunfusu

Air65 C03 camera adapter for Mobula6 / Mobula7 canopy

Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…

Downloads
155
Likes
5
Rating
0
P
PrintablesJustGaren

Mobula7 1S Case

I have made a case for the mobula7 1S with compartments for my charger (VIFLY Whoopstor), USB charger and a short cable. Also there is space for 7 1s batteries. I can also make one without the charger compartment, just ask!

Downloads
152
Likes
12
Rating
0
P
PrintablesSamuel

Mobula 8 GPS mount - V2

This is a GPS mount for the Happymodel Mobula 8 quad. (Beitian BE-122 gps module) You also need a M3x10 bolt to install it on the mobula frame. Models available: Total weight “NO VENT” (25% infill, 2 walls, 0.2 layer height) = 5g Total…

Downloads
152
Likes
8
Rating
0
P
PrintablesDanZbo

Mobula 6 Legs

I was annoyed as I kept hitting the ground with the bottom of the drone. I made these small, light and efficient legs which work with original screws. My quad now weighs 37g with the battery and with the stock battery (250mah) I have the…

Downloads
151
Likes
22
Rating
5
P
PrintablesLuBi Tech

Mobula 8 Landing Gears

To fix the gears to the drone you need three m2x5mm or m2x8mm screws. Print tips: -print both parts and glue them together -print laying on the side -use support touching only build plate

Downloads
149
Likes
9
Rating
5
P
PrintablesAlex Sabetta

Mobula 6 2024 rugged box

a useful remix, enjoy.

Downloads
142
Likes
19
Rating
2
P
PrintablesRanger6

Mobula 7 Spiked Canopy

This is a remix of Airmaxx23 model for the spiked canopy - https://www.thingiverse.com/thing:3385065 For the mobula 7 I decreased the internal width to fit the camera and also made sure the screws for securing the camera had enough depth…

Downloads
140
Likes
12
Rating
4
P
PrintablesIan99rt

Mobula 7 1S ultralight TPU battery strap

Got a lightly used Mobula7 1s ELRS version with 8 BetaFPV 450mah batteries BT2.0 connector for a deal. Flew it about 8 times using the battery lead in tensions (connector at the front) to keep the battery from coming out but a high speed…

Downloads
139
Likes
27
Rating
5
P
PrintablesNoahLikeTheArk

Angry Mobula 6 + Runcam Nano 3 Canopy

I remixed the moblite canopy to use a front screw so it would be compatible with a full size flight controller. The angle is about 30 degrees using the last hole. Category: R/C Vehicles

Downloads
122
Likes
7
Rating
0
P
PrintablesRACBOTS

Caja Dron Mobula 6 - Mobula 6 Drone Box

Caja diseñada a medida para dron Mobula 6 Tiny Whoop con tapa que cierra a presión gracias a mecanismo de clicks. Custom designed box for the Mobula 6 Tiny Whoop drone with a lid that closes under pressure thanks to a click mechanism.…

Downloads
122
Likes
15
Rating
0
P
Printablesekoscape

IKEA Skadis Mobula6 Tiny Whoop Mount

A 3D-printed IKEA Skadis mount for the Mobula 6 FPV drone would be a compact and functional holder designed to securely store and display the small quadcopter on the popular Skadis pegboard. The mount should feature a custom-fit cradle or…

Downloads
116
Likes
16
Rating
5
P
PrintablesSergey Parshin

Mobula8 o4 lite canopy (lighter version)

A canopy to mount O4 lite on Mobula 8 frame. Print with hare 70 D (or harder) TPU, 15% infill, 3 wall loops all the way. Airunit is mounted hanging downwards, with a set of M2 bolts without nuts - screwing directly into the TPU. With two…

Downloads
116
Likes
12
Rating
0
P
PrintablesBass.Boi

Microblivion (Mobula 7 frame)

Got bored from duck taping the original frame after every hit to a wall. This is durable, but you should order more props ;-) New PID tune is required, in general, lower the P-gain for 10-15%. Print instructions This is 105mm frame for…

Downloads
116
Likes
14
Rating
4
P
PrintablesD3D Pro

Mobula6 Drone Transport

Mobula6 Drone Transport. I needed something to put my Mobula6 in instead of a cardboard box. No supports.

Downloads
114
Likes
30
Rating
0
P
PrintablesThump2010

EOS2 Mobula7 canopy (should fit any "whoop" style quad)

I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle would change every time someone sneezed in my house so I figured it was time to design a new one. I did design this so…

Downloads
112
Likes
10
Rating
0
P
PrintablesSamuel

Mobula 8 VTX antenna + GPS holder

Version V2 available Mobula 8 new GPS mount ________________________________________________________________________________________________________________ This is a simple GPS holder for the Happymodel Mobula 8 quad. (Beitian BE-122 gps…

Downloads
111
Likes
10
Rating
0
P
PrintablesAndrew Geltz

Mobula 7 HD 1S larger battery clip

Bought some batteries that were mislabeled in the specs and they were too big to fit into the regular tray. Customer service gave no response so I figured I would try to make it work. The batteries fit snugly into clip (tighter than the…

Downloads
109
Likes
11
Rating
0
P
PrintablesefficientAF

Mobula 8: R-Line 550mah battery holder

Anyone who has purchased these batteries will know they don't fit and require some surgery on the frame but there was no quick solution that would let you do flips without the battery being yeeted out. I gave this a decent test run with…

Downloads
108
Likes
6
Rating
0
P
PrintablesDanZbo

Mobula 6 Stand

Update New design - print with supports :-) Simple stand for Mobula 6 with slots for batteries and USB charger from original package. Battery hole dimension (Length x Width x Depth): 12,5 x 6,5 x 8 mm. Note: I miscalculated when designing…

Downloads
106
Likes
16
Rating
5
P
PrintablesSergey Parshin

Mobula8 o4 lite canopy

A canopy to mount O4 lite on Mobula 8 frame. Print with hare 70 D (or harder) TPU, 15% infill, 3 wall loops all the way. Airunit is mounted hanging downwards, with a set of M2 bolts / nuts. With two fresh BebtaFPV's 550mAh batteries, I…

Downloads
104
Likes
7
Rating
0
P
PrintablesSamuel

Mobula 7 8 Hawkeye Thumb - Camera Mount

This is an easy printable mount support for Hawkeye thumb 4k camera. Must be in TPU material. For the installation you'll need 2xM2 screws, the one's in the pictures are perfect. Its suitable for all canopy Mobula style. Enjoy! Print…

Downloads
104
Likes
9
Rating
0
P
PrintablesSpencer

Mobula 7 Case

A case for 75mm tiny whoops like the mobula 7. Print instructions Category: Robotics

Downloads
101
Likes
9
Rating
5
P
PrintablesNoobie

Mobula 8 walksnail lollipop canopy

This is a remix for the walksnail version of the mobula 8. https://makerworld.com/en/models/689978#profileId-618749

Downloads
100
Likes
13
Rating
0
P
Printablestruglodite

Mobula7 300mah Adapter

I designed this thing to fly 1s300 packs on a Happymodel Mobula 7 frame. It has a good friction fit on the battery, similar to a mobula6/meteor65. It snaps in place so you can keep it in several packs in a row, and pop it out easily when…

Downloads
100
Likes
14
Rating
0
P
Printablesmickey

micro blivian mobula 8 upgrade

Petg and PAHT CF are my two favorite options

Downloads
99
Likes
16
Rating
0
P
PrintablesProxFPV

Mobula8 O3 Camera Guard

This is a TPU protector for the O3 camera on Happymodel Mobula8.

Downloads
94
Likes
8
Rating
0
P
PrintablesDanZbo

Mobula 6 USB charger cover box

Simple cover for USB 1S charger. There are also holes for two LEDs and a switch. It also fit in stand, which you can download here: https://www.printables.com/cs/model/238194-mobula-6-stand Other FPV stuff: Alien 5" GoPro mount Alien 5"…

Downloads
91
Likes
14
Rating
5
P
Printablesemtrax

Tiny Whoop AIO Buzzer Mount (28.5x28.5mm, Mobula 7)

This is a buzzer mount for Tiny Whoop AIOs (28.5x28.5mm) designed to tidy up the buzzer installation under the canopy. The design has been optimized to be printed with TPU and to be very light. Print Settings Printer Brand: Creality…

Downloads
91
Likes
15
Rating
0
P
PrintablesPITER88

MOBULA 8 conversion to 3 inch toothpick frame

This is conversion frame mobula 8 to 3 inch toothpick

Downloads
90
Likes
8
Rating
0
P
PrintablesThump2010

EOS2 Mobula7 canopy (should fit any "whoop" style quad)

I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle would change every time someone sneezed in my house so I figured it was time to design a new one. I did design this so…

Downloads
88
Likes
6
Rating
0
P
Printablesprimo

IKEA Skadis Mobula7 Tiny Whoop Mount

A mount designed to hold the Mobula7 (and other Mobula models) on the IKEA Skadis pegboard. It uses the universal hook system.

Downloads
84
Likes
21
Rating
4
P
PrintablesPITER88

mobula 8 analog antena cover perfect fit lolipop

this is perfect mobula 8 antena cover

Downloads
83
Likes
9
Rating
0
P
Printablesfab

Mobula7 "indestructible" frame / crazybee F3 / Modular design

Improved previous concept, made it lighter and made a lot of small improvements. It is meant to replace the mobula7 frame, but can probably replace most crazybees of this size. It is intentionally multi-part to enable two different kind…

Downloads
82
Likes
10
Rating
0
P
PrintablesOliver

Walksnail Moonlight Mount for Mobula 8 O3

The Walksnail Moonlight Mount is a -designed holder for attaching the Walksnail Moonlight Kit camera to the Mobula 8 O3 drone. This mount ensures a secure fit and optimal camera placement for smooth, stable FPV footage during flights. ✅…

Downloads
80
Likes
4
Rating
0
P
Printablesorson80

Case for Mobula 7 drone

Simple case for the Mobula 7 drone. The case holds the drone, 4 batteries and spare propellers. The lid and clip are simply snapped together, no gluing is required.

Downloads
75
Likes
9
Rating
0
P
PrintablesRulox3D

Mobula 7 Canopy (protoype-testing)

Based on a Viking helmet model originally shared on Autodesk’s community platform, licensed under CC BY-NC-SA. Modified and adapted as a Tiny Whoop canopy. All credit to the original designer and Autodesk. Not for commercial use.

Downloads
75
Likes
8
Rating
0

Mobula6 frame remix

Frame Mobula6 remixed model My Mobula6 65mm frame copy. I've not original frame and not tested model (waiting parts for my first TinyWhoop). If you want print frame give feedback please so that i could change. (I'm just learning)…

Downloads
75
Likes
4
Rating
0
P
Printablesknoopx

Runcam Nano 3 19mm Adapter (mobula6)

Same dimensions as the one on the mobula6 Category: R/C Vehicles

Downloads
74
Likes
5
Rating
0
P
PrintablesChris vK

Mobula 6 HD - tinywhoop case - REMIX

I liked the original design a lot, but I prefered to have a case where I can put all my things in... So I created that remix. It will have enough space to fit a small BetaFPV Lipo Checker... of course you can use it for sth. else too,…

Downloads
74
Likes
10
Rating
0
P
PrintablesYoufu

Mobula 7 V4 frame battery holder for 450mah lipo

Cut the original battery holder parts off so that you have two parallel and flush rails which the battery holder clips into. print in TPU

Downloads
74
Likes
8
Rating
0
P
PrintablesRutkowski

Mobula6 HD to Mobula 7 HD frame mod

Frame modified for mobula6 hd and its runcam split 3 lite board. Category: R/C Vehicles

Downloads
73
Likes
5
Rating
4
P
PrintablesJura Švébiš

Mobula Ray Wall Art

Mobula Ray Wall Art

Downloads
68
Likes
13
Rating
0
P
PrintablesPhilPhil

Batteryholder for the Happymodel Mobula 6

I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! Batteryholder for the Happymodel Mobula 6 It is designed to hold 1S 300mah 75C…

Downloads
66
Likes
8
Rating
0
P
PrintablesZakoplex

HappyModel Mobula6 Tiny Whoop 1s Battery clip for folded LiPo like Tattu & Nitro Nectar HV batteries. Ultra Light and regular versions.

Super easy quick print. Rounded side is the one you insert a battery from. No supports for either version. The ultra light is still super sturdy. Go for that one first. You can clip off the two existing battery clips if you want to…

Downloads
65
Likes
7
Rating
0
P
PrintablesKidCe

Meteor85 Frame Drill Adapter for Mobula8 EX1103 Motors

Mobula8 Frame is soo damnn easy to break, its better to switch to the more durable Meteor85 frame. The Original EX1103 motor screw pattern is different from what betafpv uses on the meteor85 so its necessary to drill the fitting holes for…

Downloads
64
Likes
11
Rating
0
P
PrintablesRanger6

Mobula 7 Case

-Note this still is work in progress- A case for 2 mobula 7 frame drones with a storage cutout for a Vifly Whoop V2 1s battery charger. It also has storage for 6 1s batteries in the lid. The hingess use a peice of 1.75mm filament as the…

Downloads
62
Likes
5
Rating
0
P
Printablesvprokopiv

C03 camera holder for old Mobula6 canopy

Uses Phoenix-Prints' design: https://makerworld.com/en/models/938312#profileId-903531 Needs a lot of supports, organic are not too annoying to remove. Version on pictures is 30 degrees. UPD: I've been using it almost daily for months now…

Downloads
59
Likes
3
Rating
0
P
PrintablesJon916

Mobula 6 Freestyle Antenna Holder

STL found on Happymodel's website for Mobula 6 Freestyle HD Zero. I figured this might be useful for other builds too! Will also be uploading a remix of it in a 90 degree angle version I hacked together.

Downloads
57
Likes
2
Rating
0
P
PrintablesNatroN

Mobula 7 HD Canopy - ND Filter ready

Remixed the mobula 7 canopy to fit my caddx ND filter onto the Turtle 2 - snug fit for the lens, so it holds the lens (which was a bit loose for me) perfect in place. Also protects all wires perfectly. On the picture you see the 1/2…

Downloads
56
Likes
6
Rating
0
P
PrintablesShane Loretz

Mobula6 Tinywhoop Case

This is a storage and travel case for a Mobula6 tiny whoop, but any 65mm tiny whoop should fit. Pictured is the case holding a 2024 Happymodel Mobula6 HDZero ECO. I designed the case to fit the original foam that the quadcopter was…

Downloads
55
Likes
9
Rating
4
P
PrintablesThump2010

2s Battery holder for the v1 & 2 Mobula7 frame.

Upon request I made a 2s lipo holder to fit the version 1 and 2 Mobula7 frame as they come designed for 1s batteries. Designed to be printed out of TPU. I printed at 0.15mm layer height, don't need support (looks like it does but prints…

Downloads
52
Likes
6
Rating
0
P
Printableschixxi

Happymodel Mobula 7 - Spacers

Spacers for Happymodel Mobula7 FPV drone. In the model I got, it seems like the flight controller can move up and down way to far (up to 3mm). If it moves up or is pushed up (i.e. when plugging in USB), the FC then touches the…

Downloads
51
Likes
3
Rating
0
P
Printablesspuder

Mobula 7 Case

A case for 75mm tiny whoops like the mobula 7. Category: Robotics

Downloads
50
Likes
3
Rating
0
P
PrintablesBobbio

Mobula 6 HD Battery Adapter

This adapter is used to mount the LiHv 450 mAh battery (I used these ones ) on the Mobula 6 Freestyle HD . Design to be printed using PLA or any stiff non-flexible filament (DON'T use TPU). Simply flex the original battery compartment on…

Downloads
50
Likes
6
Rating
5
P
Printablesagus97v

Mobula 7 HD stand

Quick base I drew for the Mobula 7 HD, though I think it should fit the Mobula 7 as well (as long as they have the same frame). It has 2 different positions, one in an angle and another one flat. The connector fits really snug with the…

Downloads
50
Likes
4
Rating
0
P
PrintablestheFPVgeek

Mobula 7 Battery Shim (450mAH & 300 mAH)

Mobula 7 Battery Shim for when using a battery that's too thin like the WeBleedFPV folded 450mAH batteries or 300mAH batteries Print flat on the bed with supports (see pics). 100% infill Category: R/C Vehicles

Downloads
49
Likes
5
Rating
0
P
PrintablesCam.Traveler

Case for Mobigital 7 (Mobula7 HD Vista Naked)

Description This is a box for carrying the mobigital7 (mobula7 HD with vista naked). I set it up for the size of the mobigital7 with vista naked and frame mobula7 V3 with stock battery holder. You'll find the files in STL and STEP if you…

Downloads
49
Likes
7
Rating
0
P
PrintablesDonk

Mobula7 Mount for Skadis Peg Board

The "Mobula 7 Mount for Skadis Peg Board" is a 3D print file that allows you to securely attach your Mobula 7 drone to a Skadis peg board. The mount is designed with precision and durability in mind, ensuring a snug fit and stable support…

Downloads
49
Likes
7
Rating
0
P
PrintablesGrzegorz Russek

Happymodel Mobula 7 1S LiPo Holder

Just a simple addon to Mobula 7. No need for rubber bands. UPGRADE: Added spare wire holder. Category: R/C Vehicles

Downloads
48
Likes
7
Rating
0
P
Printablesmuchzill4

1s LiPo Holder for Mobula 7 V4 Frame

Heavily inspired by something I've found on thingiverse, which I can't anymore, so no attribution. (OG author, shout if you see this!) I tend to use a rubber band over the battery for extra secure fit. Print in TPU.

Downloads
44
Likes
7
Rating
0
P
PrintablesPrintoptiontwo

Wiring Protector for Mobula 8 with DJI 03 Air Unit

My friend crashed his Mobual 8 drone that had been factory fitted with the DJI 03 Air Unit. When he brought it to me for repair I found that the “factory” build had allowed the Air Unit to Flight Controller wires to move into the path of…

Downloads
42
Likes
0
Rating
0
P
Printablesza_kerosinom

Mobula 7 case

Fits 8 batteries, charger and spare parts

Downloads
42
Likes
4
Rating
0
P
PrintablesTTGeek

Mobula7 carry case

The quard is such a tight fit that you dont need a lid while you can easely pull the quard out again. If you want a lid, there's a 3mm hole and a triangle to help the lid stay in place. I havent designed a lid since i dont need it, but if…

Downloads
40
Likes
2
Rating
0
P
PrintablesLandscapesphere

Mobula 7 Cinematic Mod

TPU filament 1x M2 x 20mm Screw 1x M2 Nut The camera housing can be printed without support. The side where the lens is, has to be flat on the print Bed. After printing, you need to cut it with scissors. See the picture for reference. To…

Downloads
39
Likes
3
Rating
4
P
Printablesch.horisberger

RunCam Night Eagle 3 Holder for Mobula 8

Printed in PET-G this weights about 2g The 5.8Ghz antenna can be wedged in between the camera and the leading edge of the mount RunCam Night Eagle 3 at AliExpress: https://a.aliexpress.com/_EHhsPGd

Downloads
37
Likes
2
Rating
0
P
PrintablesThump2010

65mm 2s 300-350mah Battery Holder (aka a battery holder to make a Mobula6)

Do you want a 2s 65mm "whoop"? I made a 2s 300-350mah battery holder to fit a 65mm frame, you need to cut away the old 1s holder. I did not turn the battery on it's side as it just starts to hang too low at that point. It works with…

Downloads
36
Likes
5
Rating
0
P
PrintablesNinova66

Mobula7 HD - VTX and Camera Washers

My Camera screws came loose while flying so the washers went missing and then I lost one of the washers to the VTX board while I was swapping it out with a AXII Micro. Then I remembered I bought this 3D printer for some reason. So i…

Downloads
35
Likes
1
Rating
0