253 models
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This is a refined version of my previous deep pocket clip, to better match some of the stainless steel suspension clips you see being sold online. This is a simple S-shaped design, making it easy to snap on your keychain. I printed this…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Ryobi 18V multitool wall-mount
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for multi-tool (or ocillating) tool blades holder. Should be pretty universal.
Print approx. €15.60–€19.06 excl. taxPreliminary estimate for one variant
Dieser Wandhalter ist nicht für den mobilen Einsatz geeignet, da das Multitoll nur eingehängt ist. Der Innensechskant kann im Halter aufbewahrt werden.
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant
Designed for Makpac size 2 (155mm height outside) Designed in Onshape https://cad.onshape.com/documents/6c8885acbded4393660dad2f/w/ced976dd821b423d755077ca/e/378dd070d238d2d2863483a9?renderMode=0&uiState=63b16e8f08d58430adbfa920
Print approx. €12.42–€15.18 excl. taxPreliminary estimate for one variant
This tool is made to be as compact as possible and so it takes the level of detail the Prusa Mini with the 0.4mm nozzle can produce to the edge. Design The features that are included are: Metric screw length rules Metric screw diameter…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
There are no doubts that bottle openners are the most useful key chain tools ever :-) But I have allways been thinking about mixing it together with phone stand that I allways miss when needed most! Additionally, I added some other cool…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for PETGSource material: PET
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Videos: https://youtu.be/AlD5KGxMANU https://youtu.be/q9qEr93DqzI Hello all, I have been working for a few times now on a system that would allow disabled people, that lack of mobility in their fingers and hands, to use normal everyday…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Crankbrothers Multitool-Halter für MTB zur fixierung mit Kabelbinder am Rahmen. Hält auch ohne Sicherung!!
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET
Multitool - super light, universal. Despite its small size and light weight, the tool unscrews very large screws. The robust construction resists twisting and breaking. This isn't a small screwdriver for 4 mm or 1/8" bits. These weren't…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Bike multitool with: - holder for Wahoo gps (adapter) - holder for GoPro - disc brake alignment tool - disc brake spacer
Print approx. €6.90–€8.44 excl. taxPreliminary estimate for PETGSource material: PET
Choose 9 attachments to print and assemble this multitool. Print Lower, Upper, 2 Nuts, and 9 spacers. The nut is hard to screw on with hand, use a tool if possible. Print threaded parts in high-quality settings. (i used 0.16mm layer…
The Swiss Card is a great multitool, ive carried one for 11 years, but its outdated and there are common tools now that it doesnt include. This print uses the pen and tweezers and pen from a swiss card, but uses a custom, more comfortable…
I created this tiny but mighty pocket clip to have extremely quick access to my keys and keep them secured to my pocket. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter.…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
This ultra compact keyring features : beer bottle opener, phone holder, phone number (to never loose your keys), shopping cart token and LED to find your lock at night. Why you should print this multitool ? You no longer need 100…
parts required 4x 3/16" washer (Ø14mm and 1.2mm height) Keychain tool with reinforced 1/4" and 4mm hex sockets Storage for fourteen 4mm driver bits or six 1/4" driver bits (or combination of both). You can even use the exposed washer as a…
Ein hilfreiches Werkzeug zum Anbringen von sauberen Fasen an 4er PTFE's um möglichen Filamentstaus aufgrund von unpräzisen, schlecht zentrierten und nicht stetigen Übergängen zwischen Filamentkanal und PTFE vorzubeugen. Wahlweise 90Grad…
An old project from a crumby CAD class. Never got to fully test it but it looks cool and might probably work. The print default at 2mm thick. This might not be thick enough to really act as a bottle opener, but going too thick stops the…
Fully 3D printable pliers-style multitool styled after the Leatherman Charge Plus ( https://www.leatherman.com/charge-552.html ) No screws or springs required, some filament is used for hinges. Assemble the Pliers LAST for an easier time.…
Best non weaponized door stop on the internet Designed by: ChrisMUC https://www.thingiverse.com/thing:200571 Print instructions Printed in TPU using the 'Generic FLEX' settings @.2mm layer height. WARNING: You must use glue stick or some…
Multitool V2.0 Angle meter with 15° division Radius gauge from 2 - 10 mm (outer radius) Radius gauge from 2 - 5 mm (inner radius) Ruler up to 80 mm Gap marking from 4 - 80 mm Center finder up to 80 mm Partlist with wing nut (V1.0 - V1.2):…
Filter X The latest creation from Nate16. This is still in testing phase and looking for feedback. 5 toolhead model (Intended for toolchangers) 1 toolhead model (Standard 2.4 replacement) ABOUT Designed to be an all in one solution For…
It still aint perfect at anything, but it's decent at a lot Straightedge Square 90 deg protractor w/5 deg intervals Compass for drawing at half cm interval ruler to ¼ centimeter precision (precision is relative to your printer) 45 deg…
Print without supports Made from a scan of an X20V battery
I've always loved little tools and key fobs. Made this one day and thought it was pretty cool :) Tool is about 8.9 cm X 2.4 cm. Please tell me if it works well for you in the comments :) Tool list: pry bar, wire stripper, nail remover,…
Meet the MultiTool , a compact, pocket-sized Swiss Army knife designed specifically for students, creators, and daily desk work. It packs six essential school tools into a single, sleek, 3D-printable design that requires absolutely zero…
I forgot where I got the files, so I can not link the original, if you know, please send me a link, and I will update the description. I am not trying to take credit for something I did not make myself from scratch. Edit: Bryan reach out…
This need to be printed using PETG for better and more durable results. No support needed. Just print and use :) Available in 30mm for Leatherman and 35mm for Victorinox cases. Buy me a coffee if you want to support me!
Stand for 91mm swiss army knife multitool.
not 100% accurate in the least, but i had to model this real quick so i could get back to playing the game. split for printing and color separated for the most part. axe head is designed to swivel in and out, tried to make a locking thing…
It still aint perfect at anything, but it's decent at a lot Straightedge Square 90 deg protractor Compass for drawing at half cm interval ruler to ¼ centimeter precision (precision is relative to your printer) 45 deg template Hexagonal…
Bookmark Multitool with ruler, protractor, compass and musical instrument (strum on edge of desk). 0.2mm layer, no support, no brim, no raft. Print with numbers face down (on build plate). Update: Just added 10cm version STL
This is a cute multitool that fits in your wallet, or can be your wallet with a nice band. Tools on the device: Comb Bottle Opener Bag-clip Wrench 1/4 and 3/8 (Metric mk2) Letter Opener Screw Driver Wallet band indents It is best printed…
Yeah, it's a holder for Ryobi multitool. Four screw holes are in place for Biltema pegboard, but you can also attach this with wood screws to other surfaces. Biltema begboard has 4mm holes 12mm abart. Print instructions It's important to…
I created this model to be able to store my DeWalt multitool on the wall. The tool hangs down from the mount so as to not put too much strain on the battery holder. This same mount can also be used for the following DeWalt tools: DCS355…
An organizer for 7 EDC pocket items such as typical sized pocket knives and mulitools. Deep finger notches are provided for easy access. A 30mm tall bottom / basement bin is included to raise the height of the bin to be suitable for ~90mm…
This is a stretched and cut up version to fit the Ryobi HP oscillating multitool. The tapered sides to save some filament and make the overhangs a bit less reliant on supports. Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm…
Ikea Skadis Leatherman Multitool Holder. Designed to fit the Wave+, but also fits others.
This is a really quick and easy tool to help you remove/install the frame locks. It has imprints in 2 directions so it works both at 0 and 90 degrees. The spacing has been scaled up 3% from the original frame locks so regardless of your…
A keychain multitool which has a number of useful things in a compact format. It contains wrenches, a pry bar, drivers, and a bottle opener. The better material you print it in the stronger it will be. As shown it was printed at: 0.1mm…
Revolutionize Your 3D Printing Workflow with the Maker Multitool: 4 Years in the Making! See it in action! As a 3D printing enthusiast, I'm always looking for ways to streamline my workflow and make the process more efficient. That's why…
This is for kids of any age who want their own multi tool but maybe can't have one. Designed to accommodate a regular wooden pencil profile Great for old stubby pencils Multi tool pencils can be up to 80mm in length - you can always cut…
Oscillating/Multitool Blade/Attachment Holder for Honeycomb Storage Wall. Disclaimer : They fit my Milwaukee blade set and should fit most other blades, but I'm sure there are a couple that might not work with it. Leave a like and a make…
Tested on Bibury 19 in 1 and on a Rocktool 12 in 1 both use the same blade as many chinees multitools on the market if it works for you on a different tool let me know and ill add it to description. Know Compatible Tools BIBURY Multitool…
Three variants based on how much you would like to store (3U, 6U, or 9U). Photo shown is a 3U. Model also includes finger cutouts to easily remove units as needed.
First, print the mk4-steel-sheet-holder-body according to the .3mf. Its just standard PLA, no fancy settings going on. There is a version for use with threaded inserts as well as one without. Then, you print the inlays in a color you…
Overview Hi, I'm proud to present Pereuka, a keychain multitool inspired by these small fancy titanium prybars made by some EDC oriented brands. It has a few neat tricks up its sleeve. It's open source, meaning anyone can customize it…
This is an adapter for holding sandpaper with an oscillating multitool. I designed it for a DeWalt DCS356, but it may fit other brands/models with the same blade interface. The Everclamp grid with sqwasher plate and thumbscrews lets you…
A multitool to operate doors, locks, buttons, shopping carts etc. Inlcudes also pliers for grabbing and/or picking stuff. I think every "hygienic" tool needs a holster because otherwise you just put the germs from the tool into your…
Made this simple hanger for my leatherman. Probably work with other belt-based stuff. I printed mine with 0.2mm height and 0.4mm nozzle. The gap is 1mm and the clip around has a 2mm “wall”. Its not intended to be taken down from the wall…
This is a simple design I made to hold my Milwaukee M12 FMT multitool. I wanted to be able to hold all the accessories while keeping space for sanding disk and blades. The body is split into two parts because the full model does not fit…
This thingy is a very basic top plate for my YiHUA 862BD+ hot air soldering station. It provides room for 6 hot air nozzles, 15 soldering tips, a spool of filament, a can of soldering flux, various diameters for tools (I store the SMD…
This multifunction angle tool combines a wide range of marking and measuring features into one compact, durable and easy-to-print body. It is designed for everyday workshop tasks, woodworking layouts, quick angle checks and precise…
Hello! Years ago I purchased an Ozark Trail multitool at Wal-Mart; while the multitool has served me well, and continues to serve me well, the fabric holster has not. The fabric belt loop ripped out of the back and I don't quite know how…
A dust extraction nozzle for Makita multitool (DTM50Z). Has the same size outlet pipe as their 18V router, or the other dust extraction nozzle I've made. Best to print in something like Nylon/CF I think. Messy design I'm afraid, but I…
BOM: Multitool digital thickness gauge (3D model here) Instructions: print the left and right tools attach the tools to the Multitool digital thickness gauge use the device: Checkout a similar tool with ball bearing here .
Multitoolholder for my Wallmount system. I have added the freeCAD-File for the lever so you can adjust it if you want to use it for another multitool model. Inlays and lever are glued to the body. check the measurements on the pics to see…
Printer used: Prusa i3 Mk3S+ Filament used: Prusament PETG Layer height: 0.3mm Supports enabled: for buildplate only.
Rugged box for safe storage of multitool/oscillating saw blades.
The multitool can be used as a parallel fence, spirit level or pair of compasses. The hole is intended for the compass, so you always have to add 1 cm to the scale. The preparation for the spirit level is designed for a standard 40x15x15…
If you're looking for a way to accurately engrave small 3-tool multitool pocket knives, this is the jig for you! Designed specifically for the GFT001 pocket knives from JDS Industries , this jig will hold five knives and sit in your xTool…
So recently ive started doing something I never thought id do: Using one of those rubbish $2 card multitools. But I saw room for improvement, which is what this project is about. While designing however, I started to get some cyberpunk…
A mutlittool, which can function as a self centering gauge for materials with a width of up to120mm, a measurement gauge with measurements of up to 35mm and radius gauge for inner and outer radii of up to 10mm. Please check your printers…
This tool can help with insertting connectors into the base multiboard grid.
This is a mount for a Bosch 12v Multitool, designed to be mounted to a 1" x 1" peg board. Supports are only needed in the mount plate and the inner arch. Uses Sy's pegboard mounting system. These universal mounts solve a lot of the pains…
A marvel worthy of the SpaceX logo. It can open a beer, cut package tapes, screw parts together or apart and works as an emergency whistle. Fits 20cEURO coin Can be used for hex screwdriver bits. Keychain hole is M6 screwdriver One side…
Version 2 of my credit card multitool. I added a fork and fine tuned some measurments. Video with more info: https://youtu.be/Wuyqcf4\_wyc Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Resolution: fine Infill: 25…
Multitool holder size 40x20mm
Ein schnell gezeichneter Multitool Halter zum an der Wand befestigen des Makita Multitool TM30D. Könnte auch für andere passen. Hoffe ich konnte vielleicht dem einen oder anderen damit helfen. Die Löcher sind 3,5mm im Durchmesser und…
Führung für Bosch Professional GOP 12V-28. Die M10 Gewinde müssen nachgeschnitten werden. Verwendung mit M10 Schrauben mit Teilgewinde und geeignete Federn. Ist zwar nicht so professionel wie das Teil von Festo...l, aber es ist durchaus…
2 x 3 unit Gridfinity holder for Gerber Suspension-NXT Multitool
a short 2-slot bit holder implement, able to hold three 4mm bits. It is specifically designed for the Mini Flex Companion; it will likely fit in other short slots, tho I've not tested yet. EDIT: Tested, It will fit in the Flex Companion…
BOM: 2 Z809 ball bearings Multitool digital thickness gauge (model here) Instructions: print the left and right tools print 2 pins attach the tools to the Multitool digital thickness gauge use the device: Checkout a similar tool without…
A simple belt mount pouch for a multitool/camping knife etc. Use TPU/TPE filament to allow the flexibility for the top to hold the tool in the pouch and clip shut. 2 pieces to print, then assemble and slide onto your belt.
I made an ice-scraping Multi-Tool and combined it with a Car Fuse Removal Tool (https://www.printables.com/de/model/74123-car-fuse-removal-tool … Big Thanks to jarza for that) as well as a belt cutter and glas breaker. *** VERY IMPORTANT…
Fits Bosch part# 2609256d57 Dust extractor for PMF250 CES/PMF350 CES. The Bosch adapter fits both the blue and the green series. Category: Tools
I desinged an holder for an Milwaukee Multitool M18 I printed it in PETG
I redesigned the front part of a cheap chinese thickness gauge to be able to attach different tools, like ones for belt tension check. The tools are uploaded as separate models. Bill of materials cheap chinese plastic digital thickness…
parts required 14x 3/16" washer (Ø14mm and 1.2mm height) or 14x 1/4" washer (Ø16mm and 0.6mm height) My metric hex socket set has 11 pieces. You get an extra socket in this compact wrench set (4, 4.5, 5, 5.5 and 6 to 13mm). The wrench is…
I designed and printed this bit holder for 8 4mm bits Printed in PLA+ in 30 min. No supports needed!
Just a quick tray I made to keep the 3 knives/ multi-tools I keep on my desk more organized. Tested with a Leatherman Signal, Leatherman Micra, and a Benchmade Mini Griptillian, but it will probably work with others as well. Also it has…
a 3D printed credit card toolkit, all parts taken from cheap ebay listings. The youtube video goes over the details of the different parts and features. Video: Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes…
A simple holder for the DeWalt oscillating multi-tool, for the Honeycomb Storage Wall It is also just a very generic 2 prong holder, I just happen to have made to hold my Multi-tool, I'm sure you can use it for anything that fits.…
Wall-mounted Ryobi Multitool Blade and Accessory Holder (will likely fit generic blades also), wall-mounted on a piece of scrap wood. Neat, tidy storage and easy access to all blades and accessories, plus spare sanding pads.
Container for Oscillating Multitool sanding pads. Keeps sanding papers straight and neatly organised. Print Settings Printer Brand: Creality Printer: Ender-6 Rafts: No Supports: No Resolution: 0.6mm Infill: 10-30% Filament: Any PETG, PLA,…
This works well for the Wingman that I have. I'm not sure if it would work for other tools, but as long as the width is the same it should work. Hook design taken from https://www.printables.com/model/118225-ikea-skadis-fusion-360-models.…
Its a printable Holster for the SOG Powerpint, the very small (just 83mm) Multitool. Its a snug fit, so the tool will not slide out on its own. Also you can leave the belt clip on the tool since its asymmetrical. This forces you to put…
This esoteric tool provides additional leverage and better grip for tightening the following items: Maxtrax pins M8 or similar 6 sided knobs Ram “B” size double socket arms M8 or similar eyelets (commonly found on roof/adventure racks I…
The AutoCard! The ultimate multitool that fits right in your wallet. Don't let its compact size fool you – it's packed with useful features to make your life easier on the go. With its folding phone stand, you can easily set up your phone…
EDIT: I've made a better detachable version! I recommend using it instead: A short 1-slot USB implement. It fits very nicely in my Roxon Mini Flex Companion. For usb drive, you would want to use an ultrasmall drive like this or similar:…
I love the original tools but really wanted a Multitool so i've remixed them to create a better version in my opinion. If you liked the original you'll love my take on it print two of these with the two tools joined together it's much…
Holds a Leatherman Wave multitool on a Skadis. Attaches to the Skadis with 2x 2.5 mm Skadis T-nuts . Materials & assembly Pick whether you want to use 1 or 2 T-nuts for mounting. 1 T-nut worked just fine for me but 2 would add some extra…
Leatherman Sidekick/Wingman Gridfinity Module This 3D printable Gridfinity module is designed specifically to hold your Leatherman Sidekick or Leatherman Wingman multi-tool. With a precision-fit compartment tailored to the dimensions of…
See the onshape model here: https://cad.onshape.com/documents/fb7cdc0eb4e7c48777bf85b3/w/5ec9b5eeda8c26fe761486f7/e/ec59cf0c960ffedf27eba1d1?renderMode=0&uiState=655a86623826926a557f8fa2 My Leatherman Arc multitool comes with a pocket…
Printed at 0.2mm layer, 3 walls (like al multiboard parts), 15% infill (PETG). original design is from: https://www.printables.com/@tlisek_2060345
![Another Flat/Wallet/Credit Card Multitool [2x]](https://media.printables.com/media/prints/241980/images/2184297_ad145f78-010c-4fd8-b337-4413bf17afff/large_display_flat_multitool_241980.png)
