1,150 models
Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.
Black Panther Mask - front only - no supports needed. *not large enough to be worn as a mask
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Universal tablet mount for home trainer bikes or similar. There are two versions available to download, one for landscape and one for portrait. Only two parts differ for the two versions. In “Other Files” you will find the Assembly…
So i modeled a shifter knob for thrustmasters new th8s shifter i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own it just slots into…
Eine Europalette ist eine Flachpalette aus Holz aus dem Tauschsystem des Europools, nach EN 13698-1 gekennzeichnet.
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Just clips on the axis, no need for a magnet. Try concentric first layer for cool looks :)
I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…
Customize this holiday ornament by adding your own street name to the candy cane signpost! A perfect gift for the holiday season, everyone loves a personalized ornament! This is a very fast print, finishing in only 13 minutes. Can be…
This is a model of the flag of Maryland. This flag is the most complex one I have made and it requires 3 manual color changes. Start printing the base in White. Make switches to red, Yellow then Black at the appropriate layers. See the…
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
This is a set of simple stackable trays / bowls that can be used to collect printed parts, toys, puzzle pieces, etc. The big tray can hold two small trays side by side while stacking. The trays have ridges at the bottom to make it easier…
NOTE!! No MMU or multitool printer is required to print this game! Are you a l33t h4x0r? Do you have what it takes to figure out the cypher patterns to access the servers and outwit your peers? Will you use your powers for good…? Whatever…
NOW with Helper Tool! Just place it on the panel, insert M3 screws and mark cut lines and drill points! Tired of reaching your hand through entire enclosure to disconnect or remove PSU for maintenance? This is for original Prusa enclosure…
This adds a base to put spools and other parts on the Polyphemus that won't fit otherwise. Use with rotation disabled. Select material based on what you want to dry.
Celebrate your love for the woods with the Outdoor Life coaster—a rugged yet classy design made to bring the outdoors in. This model uses purposeful extrusions to guide flawless color swaps and includes a .3mf project file with pause…
Secure your favorite devices with this pierced nipple ! I designed it with key rings in mind, but it works well with paracords also. Glue it or add it directly to your design and print it without supports needed. Easy. Dimensions: Base is…
Pendant / poster depicting Ukraine in the colours of the flag and an angry bear trying to seize it. The model is optimized for easy printing without MMU in layers using M600 command (or manual filament change) with 0.2mm layer height and…
Whether you're parked lakeside or dreaming about your next road trip, the Camper Life coaster brings adventure to your table. This coaster is designed for single-extruder printers—with built-in extrusion zones and preconfigured pause…
Print, assemble and play directly, no screws needed 8-11
Added a version with the accent embedded in the model MMU or AMS is needed unless you want to try and do a manual filament change The stand is designed to hold the phone with or without a case. Accents on the side are printed separately…
Update Nov. 2024: I completely redesigned this in Fusion 360 and tuned the tolerance for my printer. I suggest printing all the parts on the same printer to ensure a proper fit. There is a .2mm tolerance between the studs. Check your…
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing. Features: Threaded Screw Mechanism:…
This is a satisfying spinning cone fidget Separated parts 2 parts Category: Gadgets
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
*You will need a Spring-loaded toilet paper rod By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only Merchants with an active License…
Print in place pencil box with 2 laches. No assembly needed! Good for school or any other need.. Space on the inside in: Length: 190mm Width: 40mm Height: 19.8mm No supports needed but there is some bridging. In the pic the hinges are…
3 support-free skeletons. All dead, just animated by evil magic. EDIT There is a modified version of halberdier with reinforced leg. Suitable for 28mm tabletop games. Created so that they do not need any supports and print well on a cheap…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
🐙 Flexi Octopus – Print-in-Place Edition A cute articulated octopus designed to print in one single piece with no supports required . All tentacles move smoothly straight off the print bed, creating a fun and satisfying flexi motion.…
An elven archer. Could be a wood elf. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
My tribute to all creators of these vast Minecraft worlds… and their (our) children. ;) Designed from scratch in Fusion 360. NO glue or supports needed! Print instructions Print all letters (0.1 or 0.15mm layers) once, 9 pegs (pins), and…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A huge, bold, and ultra-flexible spider designed to dominate your build plate. This XXL version brings exaggerated articulation, long flexible legs, and smooth movement in one powerful print. Perfect as a Halloween decoration, desk…
Adjusted angle so it will not spill fluid on sides. I use 5mm drill bit softly inside hole after printing to clear up any mess. And after some fast turning back and forth it will slide really well. When it slides really well its easy to…
I need hinges for the Laser Cut Stackable 3D Filament Holder I am designing. I had a set of small metal hinges that I used for the prototype, but no idea where or when I bought the originals so I designed these hinges in Fusion 360. The…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A cute balloon dog mini to add to your collection. I designed this in Fusion 360 as a test and it printed very well. If you're a mini-collector like me, I think you'll love it! Prints beautifully in Matte colors but prints well in silk,…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
The MagSafe stand is designed to hold the phone with or without a case. The accent for the sides is printed separately and fitted in after being printed. Unfortunately, the accent is to big for the Mk3 or Mk4 print bed The MagSafe puck I…
Easy to print Low Poly Bear without needing any supports. To avoid visible seams you can set the seam position to the rear. Remixed from https://www.thingiverse.com/thing:709545 by ALM7377. Only modifications made to the original file is…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without support. The “Body” file…
Hello, I found this on my pc and then remembered I have remix for blade and try to find the maker of the original files but couldn’t find it on thingverse the link from file doesn't work so I am posting it here all. This was the original…
A female elf mage. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The female elven archer…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Hello, This is my first ever post and also creation I made for the FlashForge Adventurer 5M/Pro (AD5M) series printer. This kit allows the AD5M to have a drag chain that is not only minimal, but also keeps the new filament sensor in the…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Remixed the stud from this awesome model for a giant lego wreath (you'll need the leaves): https://www.printables.com/model/58424-giant-lego-wreath-no-supports-needed Wanted a logo to make it look more like a giant version of the real…
Phone Stand with MagSafe. Accents on the side are printed separately. Material: PLA Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 15% Supports: no Brim/Raft: only for Accents
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A knight in a bascinet, pig-face visor (hounskull/hundsgugel) helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…
Mario Mushrooms [multi print] no ams needed!
Print on the side, no supports needed. Fusion 360 source available! It is designed to be sturdy, and to allow the “swipe up” gesture from the bottom of the screen to unlock phones/tablets that don't have a physical home button. I'm quite…
Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Make sure when you slice it that you can see the hinges separated and not printed together. In OrcaSlicer you might have to right click and separate into parts with the STL. You might want an outer brim and support for the latches, but…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without support. The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
No supports needed
This 3D model serves as a torture test for any 3D printer, assessing its capability to print steep overhangs without supports. Specifically, this model features a 75-degree overhang. It is designed for printing without the need for…
UPDATE 20230818: v2 has improved fitment! Designed for Nikon FE2 but might fit other F style bodies! I was tired of all the printable dust caps being less than ideal for printing. I designed this cap from scratch by measuring the body and…
🐍 Flexi Snake – Print-in-Place Edition A smooth articulated snake designed to print in one single piece with no supports required. Straight off the print bed, the snake moves fluidly with natural, flexible motion along the entire body.…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A skeleton archer. Not sure how these can hit anything without eyeballs, oh well. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are…
An ancient Japanese warrior in armor. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
Rework of the 1:500 multi colour, multi plate model I originally made to allow it to be printed in a single colour, at smaller scale and in one go, rather than as separate parts. Designed using Fusion 360 from ship deck plans, photographs…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A taunting Ogre on a 1inch base. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…
A hobgoblin or any other big goblinoid with a pole weapon. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
A miniature resembling an ancient Japanese warrior. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round…
Elegant sleigh with built-in decorative elements. most of my hard work went to make sure you'll be able to print it easily - no supports or rafts needed, just a tiny bit of glue. I made 0.5 tolerances, so the parts should easily fit, even…
Easy printable cool bow tie for every occasion. Choose your color and infill you like. Model contains buckles needed for fitting the strap around your neck (simple buckle + original magnetic buckle). Print instructions Bow tie: .2mm…
A bandit with sword and shield. Could be a soldier, too. Or a mercenary. Or a deserter. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are…
A skeleton without an evil will to drive it is just a pile of bones, so here's a Necromancer. Or a dark mage. Or even a good mage with an attitude. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints…
The stand is designed to hold all versions of the Apple Watch from the SE to the Ultra. Accents on the front & back are printed separately and can fitted in after being printed. Recommended that you use my print profile, but if not make…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
![Pierced nipple [no supports needed]](https://media.printables.com/media/prints/1066237/images/8067244_74a40e1e-4310-41cf-84f0-1515b55bbbc4_a4fd3984-76e0-47f0-a820-c92d9bda6631/safety-loop.png)
![Mario Mushrooms [multi print] no ams needed!](https://media.printables.com/media/prints/69547e41-5f36-4173-a450-1d5a9c0288f9/images/12471363_02cebb75-4981-490f-a9b8-a66114d67c7b_7edf942c-9dd5-4dd9-8c05-14235391592c/2025-04-12_0898572d25f04.webp)
