339 models
Summary Are you tired of searching your clips for your airtight Samla box once opened? You like the simplicity of print-in-place parts? Then this Samla clip is for you. The only thing you need are some drops of glue to fix the clips.…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Untitled Goose Game shield Printer: Mk3s with MMU3 Filament: Extrudr Layrs High: 0.15mm Supports: No For the G-code: 1= Black 2= Withe 3= Orange 4= Sliver 5= Brown Happy Printing :)
Print approx. €5.86–€7.16 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Aurapol Black PLA Aurapol Red PLA Aurapol Yellow PLA Aurapol Gray PLA Aurapol Black Gray PLA Aurapol White Swap Instructions: Start with…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
I want to thank everyone that contributed to the Nevermore project. It has been a very useful modification to my Voron. The new V6 design offers some nice improvements but I wanted to redesign some of the parts. I remixed the cartridges…
Thanks Black Tie, that worked a treat ; ) Hopefully this is what your after : ) I sharpened one with more defined lines and left the other smooth, so your choice : ) As always check the sizing suits your needs and post some picks if you…
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Summary Another simple Clip for your 22l Samla Box with or without sealing. Just a satisfying “Click” and closed. Use a strip of double-sided adhesive tape (showcase on the pictures) and you are done with searching your Samla Clips. I…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
Motivation I've got several requests to adapt my design of the clip for the larger 45/65l boxes ( Never lost Ikea Samla Clip (45l + 65l) ) to the smaller boxes 5l/11l/22l. So far I didn't use the smaller boxes as dry boxes and until…
Co-author: @JakubJoziewic_498185 VOCs (Volatile Organic Compounds) generated from 3D printing (especially ABS) are known to cause severe health issues. This model is an updated version of Nevermore Micro V4 Filter created for 3D printer…
A snap-in mount for Nevermore micro V4 on Voron0 or other small printers with 1515 extrusions so no preloaded nut is required. Requires 2 Voron-spec heatset inserts (M3 x D5 x H4). The clip mechanism is adapted from the screwless probe…
Funny Sign - "I never make the same mistake twice, I make it five or six times Just to be Sure", multi colour wall art print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny signs see my (growing) collection…
Bring the soul-devouring presence of Nevermore, the Shadow Fiend, to life with this highly detailed STL file. Perfect for 3D printing enthusiasts and Dota 2 fans, this model captures Nevermore’s ominous form with dramatic flair, making it…
Update: 2023 Feb.28 I uploaded pair of ACF exhaust blocker. Since it's nearly impossible to make a bag of activated charcoal as a really square brick, and it'll leak by the two sides. Adding these blockers should make leaking to minimum.…
The Schmilter is a remix of the filter with a number of features I wanted to include. Added lid height and base depth, to allow for the fans to be fastened to the base with no heat-set inserts needed. Heat set inserts to fasten lid…
Endless 3D-Printed Calendar - Day & Weekday Display Update 09.01.2025 - Added Some Languages Description: Introducing the Rotating Endless Calendar - a 3D-printable marvel that combines both form and function in a timeless design. Say…
In order to improve the Qidi Q1 Pro handling of Volatile Organic Compounds (VOCs), a chamber circulation fan which doesn't blow out the air, makes sense. Since the Nevermore is a beloved air filter for this use, I designed a mount that…
Nevermore Academy logo - Wednesday style I recommend color change printing
The slider mechanism of the original Nevermore v6 did not work at all for me and I gave up after some attempts. I still wanted to open the cartridge tool-less, so the original mod didn't quite work for me either. That's why I made this…
[…] And the Raven, never flitting, still is sitting, still is sitting On the pallid bust of Pallas just above my chamber door; And his eyes have all the seeming of a demon’s that is dreaming, And the lamp-light o’er him streaming throws…
Clip Version of the Nevermore V6 Micro Plenum-Body for the 1515 Extrusions. This is just the body with Supports.
Darkdog supplied an stl to mount the nevermore v4 at the front of an ender 3 switchwire conversion, I have mixed this with the original front panel mount to create these mounts, left or right or both. I have revised the mounts with…
Here are some undead monster remixes using my Two Cent Base design. Tree supports touching build plate will handle most of them, but some need to be tipped backward and printed with a raft and tree supports to come out well. Credit where…
Adornos para nevera con la silueta de emojis o emoticones - con agujeros para dos imanes en la parte posterior. Print instructions Una vez impresos se deben fijar dos imanes : 2x5 mm.
Put an end to your filament end getting tangled up in the loose outer wraps of your spool. Assemble this clip onto your brand new spool and leave it there until the spool is finished. It rides along with the spool while you print, then…
Funny Sign - “Remember you will never be completely useless, we can always use you as a bad example”, dual colour design, printed in OVERTURE Silk PLA Rose Red and Overture Matte White PLA. For more funny signs see my (growing) collection…
Falcor the Luckdragon is sculpted in a dynamic pose, soaring through textured clouds. His furry body curls with that familiar gentle elegance, while the cloud base adds movement and height. This 3D model captures his whimsical grace,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
When constructing the Nevermore Micro V4 fan you need to glue it in a centered location. If you do not get it exactly centered the fan can rub on the outer casing. I created this tool to help place the fan perfectly centered. The tool…
this is QR-CODE For song: Rick Astley (rick roll) - NEVER GONNA GIVE YOU UP
As filtration system for core one is still not ready, and even pla smell is not great in an apartment, I created “backpack” attachment for core one. It utilises (quite plenty of) nevermore style carbon pellets and existing chamber fans to…
The 2 3010 part cooling fan usually isn't enough when you want to print faster with material like PLA. Since I put my printer outdoor, so I don't want take off the side panel to prevent the dust. So I use the base of…
Print Settings - Standard Voron parts BOM: 1 M3x6 BHCS 2 M3x8 BHCS 1 M3x25 BHCS 2 M5x16 BHCS 4 3x4x5 heat set inserts 1 Molex 2 position female connector (optional) Nevermore Github: https://github.com/nevermore3d
This is a nevermore V6 micro mount for your enderwire conversion it only uses 1x m3x16 SHCS to hold the nevermore in the mount
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a modified Nevermore duo plenum for mounting in a Voron V0 with magnetic components for easy installation and removal. A JST-XH is no fun to plug in and remove in a tiny little printer frame, this is way easier once set up. PRINT…
The Goonies - Never Say Die!, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Are you tired of losing your remote? Or worse losing them in the couch cushion? It's going to find a way there anyways so why not lean into it? That's why I've created a retractable system so they're in one place and easy to access. This…
LEGACY MODEL >This is a model which I don't want to take down simply because it is not mine. For the sake of this accounts legacy, I am updating its Thumbnail, and keeping it up.…
This 3D printable YNWA (You’ll Never Walk Alone) gate-style sign is inspired by classic Liverpool supporter gates and stadium-style entrances. Designed with bold lettering and a strong, clean frame, this sign is perfect for mounting on…
✨🐍 A little piece of Fantastica, made with care and brought to life by you 🐍✨ Some objects are more than just things we can hold in our hands. They carry memories, feelings and entire worlds within them. For me, AURYN is one of those…
This is the straight version for the v6 cartridge door mod. I use this upright in my VORON Switchwire.
Turbina para nevera.
An alternative, open lid for the Nevermore V5 to improve efficiency. https://github.com/nevermore3d/Nevermore_Micro
Funny 3D Printing sign for all us old guys out there! Mounts on a wall or use the stand to display on your countertop. (You can just cut the tab off the top if you are going to display on a countertop.) Sign measures 9" wide x 5.5" tall.…
Just made the model solid. Still a great movie. Watch it, if you can. Category: Props
A Fanduct to use the Nevermore Micro V5 Duo as external part cooling on Voron 0/0.1/0.2. https://github.com/nevermore3d/Nevermore_Micro Print it standing without supports. update (06.04.2023, V17): some little adjustments, height fits for…
If you like this model and use it please upload a like, it really helps others find it! I couldnt be bothered to take my V0 apart to get some nuts in to mount my nevermore in there, and I didnt wanna order 1515 tnuts cause I'm very…
Nevermore Gate bookend/middle. Ein eyecatcher für dein Bücherregal
rick roll people with this funny keychain
Thanks a lot for to Canislupus for the original design and Slaig for the remix with the Fusion 360 files. I needed this clip for 130l box so here is my remix for the last two sizes of Samla boxes. If i understand the Ikea sizings…
I recommend color change printing Logo and Base can be joined without glue
Birthday cake fire extinguisher, plus a birthday sign. I've included a couple of print sets which let you print the Tank red and the Hose & Handle in a different colour such as black.
To the winch, wench! 8x3mm magnet to be glued in. Example print used 15% infill, but…we don't care whether or not we care. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile…
Eat your vegetable! No Problem! Veggie cookie cutter - carrot, broccoli, bellpepper & peas
Keep your Nevermore carbon fresh when not in use. Uses a gasket for an airtight seal. Gasket designed with 1.75mm TPU filament (no printing necessary for gasket). Printed latches provide a positive snap for confirmed closure. Gives good…
Single Fan Extension for Nevermore, based on The Filter Single Fan
This is a remix of the Nakatomi Towers, Christmas '88 Never Forget License Plate Frame. To enable it to be printed on smaller printers, I split it in half and created a brace for the back. You will need to glue the pieces together. PS:…
This model is loosely based on https://www.printables.com/model/981928-qidi-q1-pro-nevermore-v6-filter-mount, but completely redesigned to fit on the right side of the chamber. I have designed in slots for M3 nuts. This was printed in…
This is the nevermore micro V4 adapted for the Prometheus MSLA. We simply replace the Voron logo by the contrapposto shop. This is not our design. You can find all the info, instructions and original STLs from…
Remix of 0ndsk4's Carbon filter for V-Core with enhanced exhaust geometry. Posted here with permission of author. Exhaust now blows air more sideways so bed is not cooled from below. Exhaust angle is not changed, only position. Basket…
This simple mount allows you to mount for Nevermore V6 (2020 Extrusions) to the Qidi Plus 4. It sits in the front right between the door and the aux cooling fan. It replaces the chamber exhaust fan on the mainboard. Install Print and…
Inspired from a sticker I saw online, but can't find the website anymore. 2D Art "Never miss a chance to dance"
can be seen in the trailer for his album The Party Never Ends https://www.youtube.com/watch?v=4hN5iDe8lNA 999 Listen to some of my music here! https://app.freecords.com/profile?id=f2d41794-a88a-4c3a-af4c-537364cfc322
This is a replacement lid to add a HEPA filter (80x40x15) to a Nevermore Duo V5. If you have a 3d printer, you should use a filter (HEPA + active coal). If you don't know why, please read carefully the part of the nevermore project with…
funny QR code\ never going to give u up
This is an additional base for the magnet mod Nevermore duo to fit a Bambulab X1C. You will require the same parts as for the Voron V0 version, plus some VHB tape to stick it down. There is a cutout on the bottom to align with the “L”…
Scale to at least 500% in slicer. Best scan results when changing color mid print. You can add ironing if you want to.
Overwatch Nevermore Mask split into 2 and 4 parts :)
There is an opinion that the lid is broken, so I added an easylid of a slide type Insert the lid in the form of a slide and secure it with a 6mm FHSC bolt Additional 6mm FHCS and heatset insert are required…
Circuit de Nevers Magny-Cours, France, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Another Wednesday series gadget. Looks good when printed in colors.
New Company Policy - Your boss/manager hung something on the wall - *You → Overview - Gold & dark brown (I have none…) - Glue magnet on the back - Length: 10cm, Width: 8cm Client instead of Guest - Maybe more relevant for some of us Newly…
Customized version of http://www.thingiverse.com/thing:1074909 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1074909 Mud base The "mud" base of the gravestone is made from a square cut of a dish wash…
Mujika’s secretive gift to Emma. The key to unlocking mysteries of the demon world and forging covenants. Print Settings Printer: Elegoo Saturn Rafts: No Supports: No Resolution: 0.05 Infill: None Filament: None Photopolymer Resin Grey…
Some people judge a book - solely on its cover. Or they could determine that it is a good book by - reading it. Nevertheless, a book should not be judged by its cover, description, nor by its contents or author. What makes a good book?…
An adjustable door safety catch that prevents your door from fully closing, saving thousands of children's fingers from being slammed in a door! Fits any standard 35mm thick door. To adjust the door opening, slide the device further along…
This is a handy little scoop to help load the Nevermore Micro v6 with carbon pellets. The narrow scoop fits within the slot of the loading area of the Nevermore Micro v6 to avoid spilling carbon everywhere!
A simple funnel (plus a bonus cup) designed for feeding charcoal into Flying Gyroscope 's NeverMore Micro V6 Easy Mod cartridge. Material: any Supports: none Layer height: 0.2 Nozzle: 0.4 or 0.6 Brim: recommended
Only print original if bed adhesion is perfect. This wall piece was designed as a memorial-style print inspired by the 999 mindset. Halo, wings, and drip elements are combined into a single silhouette that prints clean and looks solid on…
Summary This is a nozzle primer for the Prusa CORE One which mounts to the gantry. This allows for nozzle priming/purging at any point during a print. It removes the need to have any priming or purging directly onto the build plate. The…
remixed mount and plenum for Nevermore V6
Never Gonna Give You Up Spotify Keychain Song on both keychains are Never Gonna Give You Up by Rick Astley. Basic spotify code (Basic Code): You need to print basic one using 2 colors. 3mm one chosen color Last 1mm. In this color will be…
This is an insert for the Now Or Never board game by Red Raven Games. Printed with very thin walls to fit everything including Game Genic sleeved cards. Print 1 of everything except 2 coin boxes and 4 Hero boxes. The hero boxes hold…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just made a one-and-done gcode for lazy people like me who want a Nevermore v6 enclosure fan. Parts you'll have to provide are 2x 2 pin WAGO 221 lever connectors, 2x 5015 blower fans, 2x M3*4*5 heat set inserts, M3 screws (forgot the…
Gamers Never Sleep I recommend color change printing
Nevermore Academy Gravure en relief impression en trois couleur (Fichiers joint pour Prusa MK3S+) Fond Bleu foncé Mauve dans l'idéal, Noir et enfin Jaune Tropicale ou similaire. Format 186x207 mm Ep 2 mm
In making the Nevermore Mini I wanted to use the full nevermore controller over bluetooth The Nevermore Mini project on Github and Printables has a screen holder for the Pi Pico 1.28" so I remixed it to support the generic GC9A01 screen…
Made a version that takes older roomba filter. amazon link here https://a.co/d/6A4MGYh
In order to fit the fans into the plenum a few small cuts need to be made with flush cutters. I highly recommend wearing safety glasses when trimming pieces off of the fans as they WILL go flying. First: cut off the wire retention clip on…
A simple mount for the Nevermore V6 and the E3NG. It mounts using the 2020 mount on the Nevermore and the Klicky mount on the electrical panel on the E3NG. This mod is NOT compatible with the Klicky, as it uses the mount for the docking…
I've been having issues with the fragile tab (used to hold the fan cables) snapping off during assembly, as it snaps across the layer line when applying a minute amount of pressure. Admittedly, this doesn't affect the operation of the…
Nakatomi Towers, Christmas '88 Never Forget License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
