1 / 3
Carbon Vault for Nevermore V6
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your Nevermore carbon fresh when not in use. Uses a TPU gasket (un-printed filament) for an airtight seal.
- Rating
- 4.714 / 5
- Likes
- 83
- Downloads
- 129
- Makes
- 7
- Views
- 1,974
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Keep your Nevermore carbon fresh when not in use. Uses a gasket for an airtight seal.
- Gasket designed with 1.75mm TPU filament (no printing necessary for gasket).
- Printed latches provide a positive snap for confirmed closure.
- Gives good gasket compression for a consistent seal
*Only compatible with the Nevermore V6 cartridge. https://github.com/nevermore3d/Nevermore_Micro
Hardware BOM
- 4pcs. M3X25
- 2pcs. M3X16
Seal installation
When installing TPU filament, don't stretch the filament while pressing into the groove. When cutting to length, leave a little excess and compress the end in the grove to ensure that a gap does not form at the seam.
Suggested print setting (Voron parts setting)- 0.2mm layer, 4 perimeters, 40% infill