Search results: nikon

Sort order

659 models

P
Printableseagereyes

Pinhole for Nikon Z-Mount

A pinhole "body cap" for Nikon Z-mount. The printed parts are just the holder for the actual pinhole, you'll have to make one or buy one on Ebay (I got mine from fireseller66, a .15mm). Printed in black PLA, it's completely light tight…

Downloads
592
Likes
65
Rating
5
P
PrintablesYveske

Nikon D3, D4, D5, D6 & Z9 battery holder (parametric)

A parametric battery holder for Nikon EN-EL18 series batteries Added a lid (also parametric)

Downloads
196
Likes
21
Rating
4
P
Printablessyumijin

Photography adapter for enlarger lens (L39 to NIKON-F)

Digital photography has become mainstream, and film cameras have declined. As a result, the used market is full of obsolete enlarger lenses. Enlarger lenses often have good performance. However, the lens mount for the enlarger is…

Downloads
140
Likes
17
Rating
5
P
PrintablesThe Corned One

Nikon XQD Memory Card Case

INTRO: The printed model shown in the photographs is Version 5. It works, but I didn't like the placement of the SD Cards on the side. It made it difficult to remove the XQD Cards when there were SD Cards in the container. Version 6 has…

Downloads
138
Likes
19
Rating
4.5
P
PrintablesJirkaDe

tall battery cover for Nikon EN-EL15

A cover for protecting a spare Nikon EN-EL15 (or compatible) battery based on a great cover by @PiJey_88387 enhanced to also cover a USB-C charging connector found on a Jupio EN-EL15C ULTRA C battery. Printed in PETG with 0.2mm layer…

Downloads
90
Likes
10
Rating
0
P
Printablessaso

Buckle replacment for Nikon Nivo/Focus6/Focus8/Trimble M3 case

[EN] Replacement of the inner part of the case buckle for Nikon Nivo 5.M/Focus6/Focus8/Trimble M3 total station. Tested on Nikon Nivo 5.M case only - see photos. The entire buckle including this inner part can be ordered at…

Downloads
89
Likes
6
Rating
0
P
Printablesclogged_nozzl3

Nikon HB-66 Lens Hood

Model adapted for better printability Works exactly the same way as the original. for the same fit as the original make sure your printe accurate and has no elephants foot. if you want to be sure it works increase the scaling to adapt the…

Downloads
84
Likes
13
Rating
5
P
PrintablesStepan Broz

Nikon F Lens Cap

What else there is to say? It's a lens cap for the Nikon F mount. You always need one more. Print Settings Rafts: No Supports: No Resolution: .20 Infill: 100% Filament: Filament PM PETG Black Notes: Prints without supports. Extra…

Downloads
3,115
Likes
252
Rating
4.98
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Downloads
1,957
Likes
270
Rating
5

Nikon F Mount Body Dust Cap (No Support Needed!)

UPDATE 20230818: v2 has improved fitment! Designed for Nikon FE2 but might fit other F style bodies! I was tired of all the printable dust caps being less than ideal for printing. I designed this cap from scratch by measuring the body and…

Downloads
1,677
Likes
111
Rating
4.63
P
Printablesthenickdude

Microscope adapter for 2x macro photography with Sony A, E/FE, Canon EF/EF-S, M, RF, Nikon F, Z, Fuji X, Fuji G, M4/3, Pentax M42 cameras

When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…

Downloads
1,221
Likes
300
Rating
5
P
PrintablesH3mpp4

Nikon F-Mount body cap

Remixed bodycap for nikon dslr and slr bodys. Thanks for Physics Dude for original model.

Downloads
978
Likes
50
Rating
4.89
P
PrintablesRob Ludwick

Nikon Battery Holder

Printed in PETG at .20mm slicing on a prusa mk3s+. The battery is shaped for the larger EN EL-3e battery. But will still fit the more common and smaller EN-EL15. It should fit a 70mm diameter by 3mm thickness O-ring if you would like to…

Downloads
917
Likes
159
Rating
5
P
PrintablesBent Derailleur

Nikon Z Rear Lens Cap

Nikon Nikkor Z Rear Lens Cap, original looking but slightly shallower (just because it was not necessary since my design has flat top). Tight fit so it sits secured. Original measurements so it protects whole width of flange. If you like…

Downloads
911
Likes
69
Rating
4.82
P
PrintablesPhysics Dude

Ultra minimal M42 to Nikon F-mount lens adapter

I found an old Carenar lens with a M42x1.0mm threaded mount (not to be confused with T-mount which is a M42x0.75mm thread) that I wanted to use with my Nikon DSLR, but the only adapter I found claimed “INFINITY Focus NOT ALLOWED.” This is…

Downloads
827
Likes
74
Rating
4.67
P
PrintablesColgS3b

Nikon lens end cap F mount

Cover for the mount side of Nikon lenses. Tested with: AF-S NIKKOR 16-80mm 1:2.8-4E ED NIKKOR-S Auto 1:1.4 f=50mm NIKKOR-Q Auto 1:3.5 f=135mm Rokinon 1:1.4/85mm AS IF UMC Designed in FreeCAD Print instructions Print with the open side up.…

Downloads
817
Likes
72
Rating
4.4
Downloads
734
Likes
143
Rating
5

The Printed Grip - Nikon SLR Camera Grip

This camera grip is designed for Nikon SLR film cameras. Confirmed to fit: Nikon FE Nikon FE2 Nikon FM Nikon FM2N (More to be tested) Through many MANY iterations and changes, here are the final features of The Printed Grip: Improved…

Downloads
720
Likes
117
Rating
5
P
PrintablesDan H

Nikon F Mount to 1.25 or 2 inch telescope adapter.

Adapter to attach a Nikon camera to a focuser for prime focus photography. Print instructions Unlike the example in the photo, you might want to print this in a matte black material to avoid reflections. Print Settings No rafts, no…

Downloads
719
Likes
61
Rating
4.83
P
PrintablesPhysics Dude

Macro lens adapters for Nikon F-mount

Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…

Downloads
706
Likes
116
Rating
4.9
P
PrintablesOachkatzl

Box for Nikon Z Storage and Batteries

A box for your Nikon Z needs. Neatly stores 4 Nikon EN-EL 15C batteries, 4 XQD/ CF-Express B and 4 SD cards. If you want it to seal, use a piece of 1,75mm TPU filament, cut it to length and join the ends with ca glue, for example, to…

Downloads
682
Likes
92
Rating
5
P
PrintablesMartin

1 & 2 Nikon EN-EL15 Battery Protection Case

1 & 2 Nikon EN-EL15 Battery Protection Case

Downloads
656
Likes
57
Rating
5
P
PrintablesPiJey

Battery Cover For Nikon EN-EL15

Battery Cover For Nikon EN-EL15 Motivation For some reason I tend to lose the battery covers of my EN-EL15 Batteries. Therefore I designed a replacement. It was also a Test for printing with (semi-) flexible material on my i3 MK3. In the…

Downloads
591
Likes
53
Rating
4.79
P
PrintablesChui.Vanfleet

Nikon HB-32 Lens Hood

Nikon HB-32 Lens Hood

Downloads
544
Likes
60
Rating
5
P
PrintablesBMdesign

Lens Cap Holders for Canon, Nikon and Sony DSLRs

The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…

Downloads
544
Likes
128
Rating
5
P
PrintablesZurrie

Nikon fmount lens to MFT m43 camera body

Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye

Downloads
537
Likes
34
Rating
5
P
PrintablesSimone Rossetto

Pop-up flash diffuser (for Nikon D7200)

Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…

Downloads
524
Likes
145
Rating
5
P
Printablesdidoriginal

Nikon F3 Motor Drive Cover

I am a hobbyist camera repairman. I have worked on more than 50 Nikon F3 bodies and 80% of them are missing the motor drive cover. However, the motor drive opening needs to be light-proof and I decided to get this cover 3D modelled. They…

Downloads
515
Likes
18
Rating
0
P
Printablesmichelegz

Nikon F mount bayonet (camera side)

Nikon F mount bayonet. This is the camera bayonet, so you can attach lenses to it. This is not the common cap bayonet, it is oriented like the one in the camera, so you can attach lenses and adapters only in the right position. You can…

Downloads
508
Likes
33
Rating
5
P

Nikon camera lid

Hey there! I made this parametric lens cover in fusion 360 for my girlfriend's camera (Nikon D3100). I could copy this lid due to the lucky fact that my brother has the same camera! However, taking into consideration that this original…

Downloads
503
Likes
148
Rating
3.5
P
PrintablesVlad Moldovean

Ultra minimal M42 to Nikon F-mount lens adapter tweaked

I took the model from @PhysicsDude and made a few sizing modifications to have it be snug on my camera

Downloads
501
Likes
32
Rating
3
P
PrintablesMephistotsihpeM

Nikon F-mount

Recreation of the Nikon F-mount. Can be used to design accessories such as adapters or macro rings.

Downloads
481
Likes
32
Rating
5
P
PrintablesMI175

Nikon lens cap 55mm

Nikon lens cap 55mm

Downloads
480
Likes
123
Rating
5
P
PrintablesRoadhouse

Nikon F100 back door latch

These back door latches at the Nikon F100 tend to break off. Unfortunately, the latches are made directly from one piece of plastic with the housing of the door. The new latches are glued. I printed with ABS and used a two-component epoxy…

Downloads
474
Likes
33
Rating
0
P
PrintablesTheCase

Nikon hot shoe plug

This is the starting point for another design - but figured it might be useful in case you lost the one that came with your camera. It might fit other cameras as well, but I only have the one at the moment. If others could print and…

Downloads
464
Likes
73
Rating
5
P
Printableskudu

Nikon F80 back door latch

This product is a 3D printable replacement latch for the Nikon F80 camera's back door. It offers a durable and precise s

Downloads
455
Likes
9
Rating
5
P
Printablesdidoriginal

Nikon F3 Exposure Memory Lock Button

The exposure memory lock button for the Nikon F3 SLR film camera. These things are known to break and fall off the body.

Downloads
444
Likes
14
Rating
0
P
PrintablesDBWL

Nikon Z - neutral mount

I recently bought myself a Nikon Z camera with the idea to adapt a lot of old and strange lenses. Since I didn't want to buy an adapter for each and every one of those (there isn't even one for some of them) I wanted to go with a printed…

Downloads
431
Likes
41
Rating
5

Nikon Rear Lens Cap LF-1

Exactly the same as the LF-1 Rear Lens Cap

Downloads
428
Likes
20
Rating
3.33

Nikon AF-S 50mm Lens Hood

The goal of this project was to prove out the feasibility of a 3D printed lens hood. I purchased a Nikon 50mm f1.4 from KEH that did not include the HB-47 lens hood so it was a good first candidate to prove this out with. The measurements…

Downloads
416
Likes
45
Rating
5

Nikon DSLR hot shoe cover

infill 100% recommended.

Downloads
412
Likes
44
Rating
5
P
Printableslars

Nikon F mount microscope adapter

I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…

Downloads
388
Likes
44
Rating
5
P
PrintablesEmiel

Nikon F3 grip

Add this grip to your Nikon F3 to improve grip without loosing any of the functionality as all the buttons can still be reached. Camera: This model has been specifically designed to fit the Nikon F3 and has not been tested on other Nikon…

Downloads
379
Likes
37
Rating
5
P
PrintablesChica BOMB

Nikon EN-EL15 battery holder

a battery holder for nikon en-el15 batteries

Downloads
365
Likes
28
Rating
4.5
P
Printablesnotyahc67

Nikon Flash PC Sync Terminal Cap for F F2 F3 F4 F5 FA FG FE2 FM2 F100

I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…

Downloads
365
Likes
33
Rating
5
P
PrintablesEfeler_Gibi

Improved Sony E-Mount body to Nikon F-Mount Lens Adapter

The original design wasn't adjustable, you couldn't fine-tune it by sanding or adding a shim. Sanding the mount side would cause the lens to get loose. Improvement List: 1- I split the adapter into two parts that screw together. This…

Downloads
364
Likes
42
Rating
5
P
Printablesmichelegz

HB-71 compatible lens hood for Nikon AF-S 200-500

Smaller, stronger and lighter than the original. It perfectly fits in both side with the double snap bayonet, so you can reverse it like the original when carrying in the bag. Print settings 0,2mm layer heigth no supports orientation as…

Downloads
361
Likes
22
Rating
5
P
PrintablesTDK3D

Camera strap quick-release clips (Tested with Canon EOS M50 + Nikon D3500)

A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…

Downloads
360
Likes
82
Rating
4.83
P
PrintablesShmuel Moses

Nikon Eye Cup replacment

The DK-25 Eyecup improves viewing comfort and prevents stray light from entering the viewfinder and diminishing contrast. PLA or TPU 0.15mm layer height orientation shown in the last photo supports are required

Downloads
347
Likes
40
Rating
4.4
P
Printablesdavidbang

Gridfinity Nikon F Mount lens holder

I removed the magnet as I thought it was unnecessary for this. The intention was for it to act as a slot, rather than a container you take out and put back in.

Downloads
345
Likes
52
Rating
5
P
PrintablesNiv

Nikon Z base mount

Nikon Z mount that works quite well with my Nikon Z6ii. Use it to mount a custom lens on your Nikon Z body. Tag me in your remix ! Have fun with it!

Downloads
340
Likes
25
Rating
4.5
P
PrintablesCarsten

Nikon to Telescope Adapter 1.25"

I changed it a bit for better fit printed with my Original Prusa i3 mk2. Cleaned the STL a bit so further customisation (Blendfile!) should be easy. I made it a bit longer so that I could ease the printable but insane steep overhang. So…

Downloads
330
Likes
38
Rating
5
P
PrintablesK

Nikon F3 Cold Shoe Adapter

This adapter allows a strobe to be mounted to a Nikon F3 camera. This is a cold-shoe adapter, so a flash sync cable is still needed between the strobe and the camera body.

Downloads
330
Likes
15
Rating
0
P
PrintablesJuvi

Nikon Z series hot shoe cover

Nikon hot shoe mount cover with Z series logo, it's a remix of another creation from a different user, i made the logo a bit higher so it's more visible and more easy to print that part in different color if you prefer it that way. if…

Downloads
327
Likes
27
Rating
5
P
PrintablesDrewDeeDoo

Nikon Zf Camera Advanced Grip

Please give it a like 🙏 Grip for Nikon Zf full frame. -Use fuzzy skin to add texture. -Use a brim on the print plate. -Print in TPU if you want it grippy. -Use 3M double sided tape to attach. Pro version available here:…

Downloads
304
Likes
25
Rating
0
P
PrintablesNovar Lynx

Improvements to Nikon Coolscan 5000 (4000) Full Roll Spool Adapter

This is a few improvements I made for mmsaxer1998's excellent adapters for the Nikon Super Coolscans. The first is a support for the rear spool that screws into the back of the scanner. Created this because I keep having issues with it…

Downloads
293
Likes
17
Rating
5
P
Printablesspontaniel

Nikon EL14a / EL14 Battery Case

Protect your precious Nikon batteries with this simple and “snappy” case! Printing Use the standard print settings in your favourite slicer. Make shure that “Minimum travel after retraction” (Prusa-Slicer) is set to 1 or lower I used eSun…

Downloads
293
Likes
47
Rating
4.8

Nikon Body Cap

This cap is printed in two parts, a F-Mount bottom and a cap. The two parts may be super-glued together before use. I've used PLA, two bottom layers, two upper layers, 0.2 mm layer and 30% infill.

Downloads
285
Likes
49
Rating
5
P
PrintablesDrewDeeDoo

Nikon 40mm & 28mm lens hood zf nikor

Please give it a like. Threaded low profile hood for Nikor 40mm f2 and 28mm f2.8 Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip

Downloads
281
Likes
43
Rating
5
P
PrintablesRangler

Gridfinity: Nikon EN-EL15 Bin

This is a useful battery holder 3mf file that utilizes a dummy battery stl from wdwhite and a gridfinity 2x1 template by Zach Freedman I used it to clear up a stack I had. These are not stackable at the moment It's noted in the part…

Downloads
273
Likes
32
Rating
3.5
P
PrintablesCrazyCote

Nikon 52mm lens Hood

Nikon 52mm lens Hood

Downloads
271
Likes
15
Rating
5
P
PrintablesMarko Žele

Nikon battery and SD + CFexpress B card box insert

This insert was made specifically for the 120 x 70 x 40 mm version of the rugged box, that is provided with the model. It can house 2 Nikon EN-EL15c batteries (or other battery not exceeding max dimensions of 56mm x 40mm x 21mm), bellow…

Downloads
270
Likes
37
Rating
5
P
PrintablesPhunXter

Nikon lens hood AF-S 70-300mm 58mm

Two types of lens hoods to fit Nikon AF-S 70-300mm or any other Nikon 58mm lenses Category: Camera

Downloads
260
Likes
27
Rating
0
P
Printablesjefftml

Customizable Nikon Rear Lens Cap

Adding Custom Text: Import the cap object in your slicer, or open the .3mf file. Right click the cap object, and select “Add Negative Volume” > “Text”. I find it easiest to position the text from the top view (View menu on top bar > Top,…

Downloads
253
Likes
41
Rating
5
P
PrintablesJoshua Wise

Nikon MB-3 (AA battery holder for N2020 / F-501) battery cover

I am pretty sure that the last time the battery cover for my Nikon N2020 film SLR was seen was ~10 years ago. It has the optional MB-3 4xAA battery holder, which was kind of annoying to have to duct tape over to get the batteries to stay…

Downloads
249
Likes
9
Rating
5
P
PrintablesDrewDeeDoo

Nikon Z mount lens cap

Lens cap for the Nikon Z mount Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip

Downloads
246
Likes
10
Rating
5
P
PrintablesJ6240

Sun Visor for Nikon D3100/D3300 Camera

Printed in Prusament PLA Galaxy Black - 0.10mm Detail - Support on the bed only - 15% infill - 5h42 printing.

Downloads
239
Likes
35
Rating
5
P
PrintablesPetr Surý

Nikon FTZ adapter

Adapter that lets you use Nikon F mount lenses on Nikon Z bayonet. I tested it with Tamron 70-300mm with no problems. But of course use at Your own risk. Supports are recommended. It is a remix of these two models: Nikon Z base mount od…

Downloads
234
Likes
3
Rating
0
P
PrintablesPioneerstig

Nikon FE Eyepiece Replacement

Needed a replacement eyepiece for my vintage Nikon FE film Camera, Can also fit other vintage Nikon cameras Printed out of TPU so it wont scratch any glasses. 30% Infill

Downloads
228
Likes
24
Rating
4.5
P
PrintablesUltiArjan

Nikon to Raspberry Pi - HQ-camera adapter

Use Nikon lenses on the HQ camera (Cmount) Print instructions print at least in 0,1 mm layers. I used a -0,1 horizontal expansion on my Ultimaker2 to get the fine thread to fit, some other printers may need a bit more correction.

Downloads
222
Likes
22
Rating
0
P
PrintablesWluhWluh

Leica L-Mount to Nikon Z-Mount Adapter

0.12mm layer height recommended. Requires Arachne wall generator for thin walls. This adapter works well for me. Let me know how it works on your camera.

Downloads
221
Likes
13
Rating
0
P
PrintablesWill

Nikon EN-EL15 Dummy Battery

A dummy battery for Nikon en-el15, to fit Nikon D7100 camera and others. I've createed this in order to work on other projects. Category: Camera

Downloads
221
Likes
14
Rating
5
P
PrintablesMeg rallend

Nikon N6006 / F-601 Film Door Latch Replacement (also fits N5005, N4004 / F-401, F-401X)

The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…

Downloads
220
Likes
4
Rating
5
P
PrintablesWojtek

Macro converter for Nikon

Hi, this is my version of the macro converter (revert lens) for Nikon with F mount. It is designed for 52 mm lenses, tested with: Nikon AF-S DX NIKKOR 18-55MM Nikon AF NIKKOR 50mm f/1.8D Part 1: You need to put a UV filter on the one side…

Downloads
220
Likes
46
Rating
0
P
PrintablesWP_Master

Nikon HB-45 Lens Hood

Lens hood, equipped with Bayonet-style connector, compatibe with Nikkor 18-55mm lens. Inspired by lens hood Nikon HB-45.

Downloads
219
Likes
20
Rating
0
P
PrintablesWadingInPhoto

Nikon deep lenshood HB-32

Another remix of laurent_despeyroux 's deep lenshood, this time to fit everything that Nikon's HB-32 lens hood fits: 18-140mm f/3.5-5.6G ED VR, 18-105mm f/3.5-5.6G ED VR, 18-135mm f/3.5-5.6G IF-ED, and 18-70mm f/3.5-4.5G IF-ED. Used the…

Downloads
218
Likes
39
Rating
5
P
PrintablesRod Laird

Nikon Coolscan 110 film holder

If you have 110 film negatives you will find there are few options to use them in scanners. I have an excellent Nikon Coolscan V which handles slides, 35mm negatives both manually and as strips and APS films. But not 110 film. To…

Downloads
217
Likes
25
Rating
5
P
PrintablesRazi Berg

Shaped Bokeh Kit - Nikon AF-S NIKKOR 50mm f/1.8G

Bokeh is the way the lens renders out-of-focus points of light, this is reflected in the shape of point sources of light in the background of photos. The bokeh shape is determined by the shape of the shutter, which means you can alter it…

Downloads
217
Likes
33
Rating
5

Nikon HB-69 Lens hood

Nikon HB-69 replacement lens hood for the AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II It is not a direct copy of the original HB-69 as I gave it a more stable mounting method. It still fits both ways and has useful groves for better grip.…

Downloads
217
Likes
17
Rating
5
P
PrintablesStijn

Nikon DK-17 Eyepiece Replacement (F3, F4, F5, F6, D cameras and more)

3D printable eyepiece for Nikon cameras replacing the DK-17. I also included a 3D file of just the thread, which you can use as a base for your own custom eyepiece or cover design. Printing recommendations The thread on this part is tiny.…

Downloads
216
Likes
14
Rating
5
P
PrintablesDBWL

Nikon SB-800 Flash Softbox

I wanted a small softbox for my Nikon SB-800 flash that is still small enough to carry it around. The main part slides over the flash head and has also has a hole for a M3 screw and nut to clamp it down if it sits to loose (works great…

Downloads
216
Likes
54
Rating
0
P
PrintablesKaJashey

4 plan microscope objective to Nikon F-mount

This is the spacer needed to attach this objective https://www.amazon.com/AmScope-Plan-Achromatic-Objective-Knurled/dp/B01G4CCGRC/ to a Nikon F-mount camera. Lets you take 4x macro pictures. to read a review of the objective check here...…

Downloads
213
Likes
53
Rating
4.5
P

Bahtinov mask for Nikon 200-500mm f5.6

A Bahtinov mask add-on for my Nikon 200-500mm f5.6 diffraction spike generator meant to assist with achieving perfect focus in astrophotos. It uses the same mounting ring to attach to the front of the lens hood. Print in black filament to…

Downloads
206
Likes
23
Rating
4
P
Printableskleinespel

Low-profile eyepiece for Nikon FM/FE/FM2/FE2

Might also fit other cameras ? I printed this in TPU95A with the finest settings my printer allows, and it fit perfectly with a bit of a push+screw action when installing. I am also sharing the FreeCAD file in case you want to modify it.…

Downloads
203
Likes
17
Rating
4
P
Printablesclogged_nozzl3

Nikon macro extenion tube

Extension tube for Nikon F mount. Minimal hardware required only for aperture control. There is a groove on the camera side to allow for the lock to keep it in place, this same lock will with a bit of filament lock the lens as well. Keep…

Downloads
202
Likes
7
Rating
0
P
PrintablesAlex_Wolf

Cold Shoe Adapter for Nikon F2

This is an adapter for the Nikon F2 camera, that gives you a cold shoe mount.

Downloads
202
Likes
14
Rating
0
P
PrintablesMephistotsihpeM

Reverse adapter Nikon F-mount to 52mm

This is a reverse or retro adapter to mount a normal lens in reverse position for macro photography. The adapter mounts to a nikon f bayonet mount on the camera side and a 52mm filter thread on the lens. Printed on an elegoo mars resin…

Downloads
200
Likes
18
Rating
5
P
PrintablesXimple Printing

Nikon FA camera grip

I bought a Nikon FA with the motorized grip, so it did not come with the hand grip. I designed this small printable grip to emulate the original accessary. Fitting is illustrated in the pic. The first time it might be a bit tight. Secure…

Downloads
200
Likes
10
Rating
5
P
PrintablesBlackbox

Nikon F to L-Mount

If you not happy with the flange distance, or want to add any other personalization. Feel free to edit. onshape Link

Downloads
199
Likes
13
Rating
1
P
PrintablesShanEngineering

Nikon Z 40mm f/2 Retro Style Lens Hood

A simple rectangular lens hood for the Nikkor Z 40mm lens. Held on by friction, although I found that if you intentionally add some horizontal expansion on the first layer or naturally get some elephant's foot it clips in nicely and…

Downloads
196
Likes
29
Rating
5
P
PrintablesDrewDeeDoo

Nikon Z Mount Body Cap

Body cap for Z mount bodies Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip

Downloads
194
Likes
12
Rating
0
P
PrintablesCM Modellbau

Lens Cap Holder for Canon/Nikon multisize, low-profile, strong grip

Please request sizes for your personal need! Up to 4 sizes in one holder is suitable. 3 is better for a low profile. The nominal lens diameter is to be found on the inside of the cap. The actual hole diameter of the holder is like the…

Downloads
193
Likes
41
Rating
5
P
PrintablesKaJashey

DX Nikon microscope adapter 2.75x and 4X

This is a print-in-place telescoping Microscope adapter for Nikon crop DSLRs. It telescopes from 2.75X to 4x magnification To see how to assemble it visit: https://youtu.be/MEB0Ze5Yfpc It uses this $20 microscope objective:…

Downloads
192
Likes
45
Rating
5
P
PrintablesVegatype

Nikon F3/FE Screw-on Eyepiece

I lost the original one and a "new" one would cost too much for what i was paying for, so I decided to design one myself. Have fun and keep shooting film! Print Settings Printer: Prusa MK3S Rafts: No Supports: No Resolution: Adaptive…

Downloads
191
Likes
22
Rating
5
P
PrintablesErik C

Nikon L35 AF Lens Cover

Nikon L35 AF Lens Cover replacement. Note: This 3D model of the lens cover has the Nikon label debossed into the lens cover while the original lens cover had the Nikon label embossed. Print Settings Printer Brand: Prusa Printer: Mk2.5s…

Downloads
184
Likes
7
Rating
5
P
PrintablesUSpaeker

LichtBeam - Projektionsvorsatz für Bowens Anschluß (Nikon Version)

Für mein Hobby der Blitzlichtfotografie wollte ich mir immer einen Projektionsvorsatz kaufen, leider sind diese meist recht teuer. Dank meines Prusa MK3S+ und Fusion360 konnte ich mir meinen Wunsch selber erstellen. Dazu habe ich gleich 4…

Downloads
182
Likes
38
Rating
5
P
PrintablesMat - Mat

Nikon F

The Nikon F is a camera from the 1960s, a 35mm SLR camera

Downloads
176
Likes
20
Rating
5
P
Printablesedsai

Gridfinity Nikon Z mount lens holders

Nikon Z mount lens holder for the gridfinity system. There are 2x2 and 3x3 versions of this holder depending on the diameter of your lens. The 2x2 is great for leaving a space between lenses and printing out a 1x2 cf express, sd card, or…

Downloads
176
Likes
39
Rating
4.67
P
PrintablesmmOne

Samsung NX to Nikon Lens Adapter

This is an adapter from Samsung NX mount to Nikon F mount. The download also includes 2x and 3x macro conversion versions of the adapter. With Samsung having abandoned its SLR / mirrorless camera lineup these cameras are often available…

Downloads
175
Likes
24
Rating
0
P
PrintablesMountainstorm

Nikon F Lens Mount

Mount for Nikon F mount lenses. Support for aperture sensing by measurement of the aperture ring and converting it into a 360 degree rotation on the “aperture sense gear” (axel needs to be sprung). Support for controlling the open/closing…

Downloads
174
Likes
37
Rating
0