Search results: notch

Sort order

257 models

P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Downloads
3,317
Likes
365
Rating
4.94
P
Printablescookiecrook

Kite Wing Tip with notch for elastic cord

Notched wing tip for a GFAK "Storm Series" stunt kite, but probably fits more brands. It slips on any 5mm rod. Notch is deep enough to fit 2 elastic cords if needed. Scale to fit your kite. Note: My 3MF and Gcode have an interior brim…

Downloads
44
Likes
10
Rating
0
P
Printablesbrentc

Cable Holder with Notch for Honeycomb Storage Wall

Just a slight modification to the original insert-cable-holder provided in the Honeycomb storage wall project which adds a notch to more securely hold a variety of cables. Adds a half-hexagon cut out above the cable-holder hole.

Downloads
1,892
Likes
508
Rating
4.91
P
Printablesthall72

Lego Compatible (32062.dat) Technic Axle 2 Notched

This model is compatible with the lego system.

Downloads
1,648
Likes
103
Rating
5
P
PrintablesEON

Lock Notch Decoder

Double sided Notch Decoder. 0.2mm or 0.4mm thickness By placing the sharp end of the Decoder on the axle inside the lock, the operator can detect flat spots or grooves as they spin the wheels. These changes reveal the lock's combination.…

Downloads
1,061
Likes
230
Rating
5
P
PrintablesTurbonator

Guitar Neck Notched Straight Edge

Guitar Neck Straight Edge designed for Fender type 648 mm (25.5 inch) scale length & Gibson type 628 mm (24.75 in) scale length. This will cover almost all makes and models of electric guitars. It also incorporates a 9.5 inch neck radius…

Downloads
890
Likes
67
Rating
5
P
PrintablesShawn Gano

Top Notch Tippe Top

A tippe top is a very unique kind of top. If you spin it fast enough it will slowly tip over and then pop-up and start to spin on it's handle! This motion is very fun to watch and has captivated great thinkers throughout history. I have…

Downloads
750
Likes
66
Rating
4.67
P
PrintablesJesse Wright

Corner notched arrowhead

Photogrammetry “scanned” model of a corner notched arrowhead I flint knapped.

Downloads
672
Likes
38
Rating
5
P
PrintablesBasementLAB

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees - Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40,…

Downloads
628
Likes
134
Rating
0
P
PrintablesInventorIan

[Remix] Notched DualSense Controller Faceplate

This remix was posted with authorization from the creator of the original scan, Xile6. If you would like a much higher-quality scan of the DualSense faceplate (this mod uses 5% of the original's polygons) that doesn't use any notches,…

Downloads
586
Likes
50
Rating
5
P
PrintablesSpradlinb

SD Card Holder with Notch

This is a remix of the great idea in https://www.printables.com/model/723309. After printing the original model I immediately realized that I had no good way to remove the lid/SD adapter to get it open again. So I just added a notch on…

Downloads
549
Likes
128
Rating
5
P

Blum TANDEM Drawer Rear Notch & Drill Depth Jig

This jig was designed to prepare the back of drawers using the specifications required for Blum TANDEM undermount drawer slides. Other overseas brands found on Amazon often copy these specifications for undermount drawer slides. Features…

Downloads
521
Likes
55
Rating
5
P
Printablesthall72
Downloads
451
Likes
41
Rating
4.5
P
PrintablesBricbasher

Best Dewalt Battery Mount With 2 Screw Holes & Notch for 12v Too

I printed with PETG, 15% infill, 0.20mm quality settings, no support. I printed these standing up as they would be mounted on a wall. The notch was made in PrusaSlicer using the “add negative volume/box” tool.

Downloads
446
Likes
137
Rating
5
P
PrintablesLayerCraft

Fliesenkelle, Zahnspachtel | Tile trowel, notched trowel

Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…

Downloads
436
Likes
25
Rating
5
P
PrintablesInventorIan

Notched Xbox One Controller Faceplate

My attempt at adding GameCube-like notches to a 3rd-generation Xbox One controller. Just so you know, this is a difficult print, so use a low layer height and check on the print regularly. I recommend using PETG to avoid having the…

Downloads
378
Likes
45
Rating
5
P
Printableseder.merino

T47 Bottom Bracket Tool (16 notches)

Given that I couldn't find any T47 BB tools with 16 notches, I made it myself. This is a simple threading tool for T47 BBs made to fit ratchet and torque wrenches instead of manually threading it yourself. Please note, the size of my…

Downloads
350
Likes
22
Rating
0
P
PrintablesChester ADHD

Hot Wheels Track Adapters (With notch)

This is a remix of the original adapter from breakitbruce, I have added a notch to hold the old style of tracks in place.

Downloads
337
Likes
17
Rating
5
P
Printableswilly.is.making

Pastamatic Notched Pins and C-Clips

These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…

Downloads
334
Likes
35
Rating
4.86
P
Printablesmbravo

Hidden cable routing z-belt covers by Akio with notch for low Z rail

I wanted to use Akio's excellent mod of Z-belt covers for Voron v2 to route the USB cable from the webcam, but I discovered that due to increased thickness of the cover it didn't fit under my Z-rail, which was positioned, in accordance to…

Downloads
301
Likes
31
Rating
0
P
PrintablesGiovanH

Gridfinity Sliding Lid Bin with Click Notch

Lidded gridfinity bins with a click-in-place sliding stackable lid. For storing very small parts you don't want spilling out. The lids have a notch that click-fits into place so a finger can easily slide a lid off, but gravity can't.…

Downloads
280
Likes
54
Rating
5
P
PrintablesPlebikson

V-NOTCH ADHESIVE CARTRIDGE NOZZLE

Precision 3D Printed Nozzle for 310 ml Adhesive Cartridges Product description This versatile 3D printed applicator nozzle is designed for controlled dispensing of thick construction adhesives and sealants from standard 310 ml cartridges.…

Downloads
263
Likes
125
Rating
4.5
P
PrintablesDusBus

Notched spatula

I needed a notched spatula for distributing some glue across a large surface. Since I just came back from the hardware store and was in no mood for another trip, I quickly checked Prusaprinters.org for a potential replacement. There was…

Downloads
251
Likes
30
Rating
0
P
Printablesgrumblegore

G-Clamp Notched

I remixed this specifically as a support device for accessories I'm working on. Primarily these are cup and bottle holders at the moment; see my profile for the things.

Downloads
250
Likes
27
Rating
5
P
Printablesamalafrozalam

Polymaker Bambu Reusable Spool Adapter - Thinner with Filament Notch

Brandon made a really nice tweak that made this fit better, but I really liked the filament notch from the original design here . This modified version just takes Brandon's version and adds that notch so that it's easier to use with…

Downloads
248
Likes
37
Rating
5
P
PrintablesCeasar

Pipe notching template guide

Made quite a few pre made notch templates for my bicycle project, for multiples angels. Will add more sizes and also try to figure out a model scale to pipe diameter ratio. Name convention is: M - Master (pipe you are going to notch) S -…

Downloads
230
Likes
36
Rating
0
P
Printablesprisoner06

Vinyl Record Dividers with MESH body (Thinner and Larger Notch)

Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film The…

Downloads
213
Likes
27
Rating
5
P
Printablesthall72
Downloads
203
Likes
15
Rating
0
P
PrintablesJustin

Multi-Notch Resin Spreader / Trowel

A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…

Downloads
197
Likes
15
Rating
5

Customizable cardboard spool rings (with notches if you want) for AMS - OpenSCAD

"A OpenScad file so you can create your own custom ring for any cardboard spool. Use the customizer in OpenScad to tweak the rings to your liking. You can add notches to the rings so they do not spin by themselves. I have included…

Downloads
195
Likes
22
Rating
1
P
Printablesricebread

MMU3 Spool Holder Guide with notch

modification of Narrow Spool Holder Guide for MMU3 by wedgeworks you can customize the length of spool holder guide and adjust the position of tube guide The one in the picture is the 102.6mm version Included single block file to…

Downloads
193
Likes
32
Rating
4.8
P
Printablesthall72
Downloads
186
Likes
12
Rating
0
P
PrintablesRustySpoons

Nu-K Riser - side wall chain notch

The Nu-K Riser’s side wall attaches securely to the frame of your K1 3D printer. It provides a designated chain notch.

Downloads
172
Likes
14
Rating
5
P
PrintablesBibben

Parametric Notch builder tool HHL shell

This fusion file lets you design your gate just how you want it for the HHL GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models, is that…

Downloads
166
Likes
6
Rating
0
P
Printablesmacsddau

Gridfinity base plate (1x1 to 4x4) with notches & Joiner

Edit. 20250307 Added base form 1x1 to 4x4 and joiner. (original files replaced).

Downloads
162
Likes
10
Rating
5
P
PrintablesGreg M

Four way pressure clamp notch bars

Fulton Woodworking Tools and Accessories (and maybe other manufacturers) make 4 way pressure clamp kits like this one: https://www.amazon.com/dp/B073QSF8JR They include a small number of notch bars, which allows some adjust-ability in how…

Downloads
158
Likes
24
Rating
0
P
PrintablesScotty7642

Folding Razor Blade Cutter with 45 or 68 Degree Notch for Filament

Simple remix of the folding razor blade cutter except there are some notches in place for 45 or 68 deg. cutting of filament. This supports both 1.75mm and 2.85mm filament in 45 degrees. There is only a 1.75mm hole for the 68 degree angle…

Downloads
155
Likes
27
Rating
4.33
P
PrintablesBig Merona

Notched trowel

I did some decor tiles in the room. To apply the bond evenly, I needed a tile scraper. I could buy them and use them, but I have a 3D printer so I'll have to make them. It was modeled to be approximately 4 inches by 6 inches in size.

Downloads
153
Likes
11
Rating
5
P
PrintablesJames S

Fret tang notcher/grinder attachement

Rotary attachment for grinding the tang from frets Fits threaded foredom rotary tool from Stewmac, same threads as Dremel nose(3/4-12 thread) Hardware needed 2 - M2x5x10mm hex head bolts 2 - M2x5 nuts 1 - M3x14(or longer) 1 - M3 nut Use…

Downloads
148
Likes
32
Rating
0
P
Printablesthall72
Downloads
145
Likes
15
Rating
5
P
PrintablesBukinara

Sidebox lid with finger notch

I wanted to put lids on my sideboxes, but wanted to make sure they were easy to open. I saw some models with tabs, but I didn't want my printer to take up any additional space, so I opted to add a simple notch. I attempted to shape the…

Downloads
143
Likes
36
Rating
4.8
P
Printablesthall72
Downloads
141
Likes
17
Rating
5
P
PrintablesGeekware

Miniskidi Caterpillar Motor Cover with Notch

By far the coolest RC printable I have done. Kudos to @ProfJohnny_823077 for all his efforts designing this awesome RC skid steer. Adding my personal touch to an already phenomenal model, I added a notch at the bottom of the motor cover,…

Downloads
137
Likes
27
Rating
5
P
PrintablesBibben

FDM shell swappable gate notched

model with firefox notches and designed to preserve shielddrops

Downloads
136
Likes
7
Rating
5
P
PrintablesTresign 3dcraft

adhesive spreader / Glue Spreader notched 2mm 150mmx80mm

0,2 layer height 5 wall 4 bottom 4top layers

Downloads
136
Likes
6
Rating
0
P
PrintablesChristoph

Notched trowel || Zahnspachtel

175mm notched trowel for large format tiles, with hook 8*8mm spacing 3-4 Top / Bottom Layers 3-4 Perimeters

Downloads
135
Likes
13
Rating
5
P
Printablesthall72

Lego Compatible (3063b.dat) Brick 2 x 2 Corner Round with Stud Notch

This model is compatible with the lego system.

Downloads
131
Likes
21
Rating
0

Ninja Bread Cookie Cutter - Kick your cookies up a notch

This cookie cutter will make a slight mark for where the arms it within the body. Great guides for decorating with icing. You can use the interior lines or not.

Downloads
130
Likes
33
Rating
5
P
PrintablesHolzerMax

Utility blade scraper with blade guard - blades with three notches

I have these wird blades with three notches, these did not fit in the original model. I you want to check if your blades fit here please check the drawing with the measurements. Secondly I added a magnetic blade guard, optimized for…

Downloads
127
Likes
19
Rating
5
P
PrintablesHi_Im_Dave

Square Notch Glue Spreader/Trowel

1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.

Downloads
124
Likes
38
Rating
0

Dudd / Missing Notches - Interlocking puzzles by Stewart Coffin (STC #129 / 129-A)

Dudd / Missing Notches Interlocking puzzles by Stewart Coffin (STC #129 / 129-A) Dudd and Missing Notches are two closely related puzzles by Stewart Coffin. Both have the same objective: assemble six burr pieces into the configuration…

Downloads
121
Likes
13
Rating
5
P
PrintablesJpmurphy5

Fly Swatter Spring with Notches

Added small notches, followed OPs instructions and now I can print and use without breaking!

Downloads
117
Likes
19
Rating
5
P
Printablesdryden

Bottom Bracket Tool 48.5 16 notch (wheels mfg + others)

This is a tool for the 48.5mm threaded, external cup bottom bracket with 16 notches. It will fit a standard ½ inch drive and can be used on a torque wrench. Print with the strongest material you have with at least 5 perimeter, possibly…

Downloads
116
Likes
8
Rating
5
P
Printableseasai

Blank Task List (updated with notches)

This is a blank task list with on-off check marks. You can directly write on the plate, or the plate size is adjusted for 40 x 12 mm labels. The bottom of slide switch should be printed with a different color. Slide in all switch tabs…

Downloads
116
Likes
26
Rating
5
P
Printablesihlamur

Macbook Apple Silicon Camera Notch Cover (Newer versions)

fits to macbook apple silicon models, newer ones with a tick screen and notch on top, the ones that have M1/M2 model cpus.

Downloads
110
Likes
8
Rating
0
P
PrintablesJAV3D

TPU Door Wedge with Customizable Disk: A Top-Notch Doorstopper - Türkeil aus TPU mit Anpassbarer Disk: Ein Türstopper der Extraklasse

English: 3D-Printed TPU Door Wedge with Customizable Disk: A Top-Notch Doorstopper Introduction: The 3D-printed door wedge is an innovative, multifunctional accessory made from TPU (Thermoplastic Polyurethane). This doorstopper stands out…

Downloads
110
Likes
7
Rating
3
P
PrintablesCrealK

Arrow notch for 8mm shaft

I keep exploding "store bought" arrow notches. I wanted to make a model which would be stronger and to be able to print. Its still the first version. I'll try to improve it as I test it.

Downloads
108
Likes
12
Rating
5
P
Printablesheylookatme

Susan Pevensie Arrow Head and Notch - Narnia

This is a reproduction of the arrow head and notch used on Susan Pevensie's arrows in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. There are…

Downloads
107
Likes
17
Rating
0
P
PrintablesGuillaume Rico
Downloads
106
Likes
5
Rating
0
P
PrintablesJ.S.

Glättekelle, Zahnkelle, Zahnspachtel, Notch Trowel

Für eine kleine Fläche Fliesen wollte ich keine Zahnkelle/Glättekelle kaufen. Gedrucktes Modell war erfolgreich im Einsatz. Habe verschiedene Varianten mit unterschiedlicher Zahnung hochgeladen. ----------------------------------- I…

Downloads
103
Likes
10
Rating
5
P
Printablesmoxy

Updated! Minimalistic Phone Stand with Swipe Notch & Magsafe Compatibile

Update 9/26/26 - Update! Better looking design & added compatibility with iPhone Magsafe. Phone or iPad stand. Designed ground-up in SolidWorks, but a remix of PhD3DP's phone stand, which was also a remix of BCN3D's phone stand (…

Downloads
102
Likes
9
Rating
5
P
PrintablesCoolDoctorJ

Printable notched stock rails for Protean Modular Takedown Blaster

I liked the battery door on the notched rail stock, but I didn't want to invest in buying the notched rails so I designed my own. I only tend to extend mine a little bit with my already lengthened stock, so I figured a printed model would…

Downloads
101
Likes
17
Rating
4
P
PrintablesChuch-in

Knob with notch type D, diameter 6mm.

Potentiometer knob, round shape (22mm) and six-pointed star (approx. 19mm). 6mm high, 4.5mm groove depth.

Downloads
100
Likes
7
Rating
3
P
Printablesthall72

Lego Compatible (6929.dat) Slope Curved 4 x 2 with Stud Notch Right

This model is compatible with the lego system.

Downloads
99
Likes
15
Rating
0
P
PrintablesTom Hoeppner

Horseshoe phonestand with notch

A horse-themed device stand that allows you to view and charge your while it sits on this nice stand. I kept all the features designed by @JR and simply added the notch for the convenience of charging your device.

Downloads
98
Likes
14
Rating
5
P
Printablesthall72

Lego Compatible (24504.dat) Minifig Face Scarf with Notch in Back

This model is compatible with the lego system.

Downloads
97
Likes
24
Rating
0
P
PrintablesRaymond Wu

Easier print in place + thumb notch

Added .5mm of tolerance to make it easier to print in place as well as a thumb notch to make opening easier.

Downloads
97
Likes
9
Rating
0
P
PrintablesUMD

140mm - 90mm - Tube notch template

Made to make a build easier in a first attempt into the world of fabricating build steel tubing. 90 mm to 140 mm OD tube/pipe Lightning infill for speed - it will be quite soft and will split if squeezed too much, I had no reason for…

Downloads
95
Likes
14
Rating
0
P
PrintablesBibben

Parametric notch builder for Removeable-gate-gcc

This fusion file lets you design your gate just how you want it for the Removable-Gate-GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models,…

Downloads
92
Likes
10
Rating
0
P
PrintablesTrevott

Notched spreader

This spreader has two notched sides. The larger notch is 6x6, the smaller is 4x4. Increase the thickness if you want to use a stiffer spreader.

Downloads
92
Likes
13
Rating
5
P
PrintablesNUeB

Notched spatula (parametric FreeCAD)

In an upcoming project I need to spread glue evenly with a rather small notched spatula. I don't know where to buy such, but I know some FreeCAD. 😁 In the dim spreadsheet you can alter the values to create a spatula with individual…

Downloads
90
Likes
8
Rating
5
P
PrintablesAdam Prchlík

Square Notched Spreader 4mm

slightly rounded notched spatula / adhesive spreader. You can easily print it in PETG or PLA and it also fits to smaller printers as is Prusa MINI there are circles on bottom plane that could help a bit with shrinking

Downloads
89
Likes
5
Rating
0
P
PrintablesMqrius

Gridfinity Fusion360 parametric bin and baseplate, with lip notches (no magnets)

Parametric bin and grid, with x, y, and u. The stacking lip has notches to prevent sliding of stacked boxes No magnets. Recommended way of using it: For the grid, just use as-is. Open the file, edit x and y, and export to your favorite…

Downloads
87
Likes
7
Rating
0
P
PrintablesCarVac

OEM Gamecube Controller Notched Gateplates

Overview This is an improved version of Olympia's smoother parametric gateplates with a thread holder optimized for FDM. The original was meant for resin printing but I find that resin gates feel less pleasant than FDM, as the stick…

Downloads
87
Likes
9
Rating
0
P
PrintablesSpeedyBP

Schoner für Schraubstock 100mm mit Einkerbungen für Rundmaterial / Protector for 100mm vice with notches for round material

Ein paar einfache Schoner für Schraubstöcke mit 100mm Backen mit Einkerbungen für Rundmaterial. Die Schoner passen bei mir so genau, dass keine Magnete benötigt werden.

Downloads
87
Likes
9
Rating
0
P
PrintablesLayer By Layer

Weight Bearing Directional Snap - Notch

Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- Disclaimer: Posted as original design because the designer Keep Making didn't post it here. He made a dedicated…

Downloads
86
Likes
9
Rating
0
P
PrintablesDeimosfr

Core One Trash bin with magnet and nozzle wiper notch

Magnetized (10x 6x3 magnets) trash bin for Core one, compatible with minimalist nozzle wiper . You can find a pre-configured 3MF file to insert magnets into it with multi color (MM3).

Downloads
85
Likes
21
Rating
0
P
Printablesnerrag

Ikea Bagganas Handle Jig with Center Notch

Quick remix of a jig I used this to mark holes for the Ikea Bagganas handles to be installed on Ikea Axstad door and drawer panels. The notch makes centering the jig on the drawer fronts easier. From Original Model: 128 mm (center to…

Downloads
84
Likes
4
Rating
0
P
Printableslaura_fae

Extension parts and alignment notch mod for Split-Flap Display

These modded parts allow you to add as many more Units/Characters to your Split-Flap display as you want – as well as align the units better using an alignment “notch” for each character. Extending the Display Center2 and Center3 contain…

Downloads
82
Likes
12
Rating
0
P
Printables3Der

Adafruit MACROPAD RP2040 Notched Stands,Holder & Rotary Cover

This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). The difference with this design versus my…

Downloads
81
Likes
9
Rating
5
P
PrintablesMarko118

Notched trowel 3m adhesive scraper

a 3mm notched trowel / scraper for spreading applying adhesive

Downloads
80
Likes
5
Rating
5
P
PrintablesNonproductive3D

Index Card Caddy with Display notch

I saw a wooden version of this that was oddly expensive. I decided to just model it and 3D Print it instead. Holds a package of index cards with a “finger” slot to pull them out and a notch to prop one up for viewing. Suitable for a ToDo…

Downloads
78
Likes
15
Rating
0
P
PrintablesFSMaker

5¼ inch floppy disk notcher support - perforatore quadrato

Si tratta di un supporto per una perforatrice quadrata (quadrato da 6mm) acquistabile su aliexpress/amazon che vi permetterà di forare floppy disk 5 1/4 sul lato opposto per utilizzare anche la seconda faccia dello stesso (deve essere…

Downloads
76
Likes
4
Rating
5
P
Printablesitscollin

Redcat Ascent 18 Notched Battery Tray

The stock Redcat Ascent 18 battery tray doesn't give any room to access channel 3. This is a copy of the stock version with a notch to make it easier get a connector into channel 3.

Downloads
72
Likes
6
Rating
0
P
Printablescoolpluggy

Wheels Mfg bottom bracket bearing remover, cup tool size 48.5mm/16-notch

I developed this tool for removing the bearings of a Wheels Mfg BBRight bottom bracket for Shimano (24mm axle). The sleeve uses the notches in the bearing cups to position it properly. Only a sleeve for the cup tool size 48.5mm/16-notch…

Downloads
72
Likes
20
Rating
0
P
PrintablesPhantom987C

Minnie Mouse Box and Lid Remix - Added Notch

Took a very popular model and added a notch to the front to help with taking the lid on and off!

Downloads
70
Likes
10
Rating
5
P
PrintablesResurrector

Emitter with shorter notch

This is an updated version of the Emitter from this amazing Lightsaber project: https://www.printables.com/model/542429-lightsaber-rp2040 The Emitter was not screwing in completely with the Blade Holder placed inside. I have shortened the…

Downloads
70
Likes
8
Rating
0
P
PrintablesBibben

Parametric notch builder tool for Bibben FDM GCC

This fusion file lets you design your gate just how you want it for the Bibben FDM GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models, is…

Downloads
67
Likes
4
Rating
0
P
PrintablesOlympia

Parametric Notch Builder Tool for OEM Stubby Gateplate

Removable Gate OEM is a project designed to bring the removable gate system to OEM Gamecube Controller shells in the form of a small DIY kit. This is a parametric notch builder tool that allows you to make uniquely notched gateplates that…

Downloads
65
Likes
4
Rating
0
P
PrintablesJackel44

CW2_EBB_SB2240_PG7_Umbilical Mount with notch

Print according to Voron spec.

Downloads
65
Likes
2
Rating
0
P
Printablescliftoce

Mini Stealthburner Notched Latch

A companion to my Mini Stealthburner push fit remix that should also work with FRDC's original mod . This provides clearance around the push-fit connector.

Downloads
65
Likes
13
Rating
0
P
Printablespellcorp

Remixed betweener notch for chain support

Removed 2mm x 41.5mm notch to allow betweener to clear the chain support

Downloads
65
Likes
5
Rating
0
P
PrintablesPumpkinSouffle

Roomba Charger Holder universal power plug notch

I printed the original design in Prusament PETG black at 0.2mm. When I went to install it, I unfortunately realized the power on the charger base of the iRobot Roomba 690 Robot Vacuum plugs in on the right, not the left. I sliced up the…

Downloads
65
Likes
9
Rating
4.33
P
PrintablesVanessaE

Simple notched hinge

This Thing is just a simple notched hinge, with four 3.5 mm mounting holes in the base and one in the arm. By notched, I mean that the arm has detents (two, 90° apart) that catch on a springy "cam", to make the hinge lock in either the…

Downloads
64
Likes
6
Rating
0
P
PrintablesFretless

Bag hanger for notched FITS base

Accessory for notched FITS base in the Frunk of the Mustang Mach-E. Including STP and .F3D data for your modification. Print this on its side for better strength and add it to notched FITS base on my profile.

Downloads
63
Likes
4
Rating
5
P
PrintablesLinked Fluuush

HyperX QuadCast Microphone Horizontal Adapter (V3 - Suited for notchless versions)

Derived from Serentos's work, for older notchless versions of the Quadcast. This can be used with only the original hardware and accepts an additional screw & bolt for sturdier results. Printing Tips Print with high infill and thick…

Downloads
61
Likes
4
Rating
4.5
P
PrintablesVladimír Waas

E-ink 7" case developed for zivyobraz.eu (Michael -notches version)

Use any printing material. PLA seems best. Print settings are nozzle 0.4mm and layer 0.2mm or 0.15mm. The frame fits all common 7" e-inks. The control board is specially used based on esp32 - ESP-INK . Description of the connection,…

Downloads
61
Likes
9
Rating
0
P
PrintablesJer

2 in x 3 in Notched Trowel for Tile

Square notches in 1/8" and 3/6" on the 2" sides and optionally ¼" notch on the 3" side.

Downloads
60
Likes
5
Rating
5