Search results: nvr

Sort order

49 models

P
PrintablesKamil Kaleta

REOLINK NVR RLN36 RACK BRACKET

What you’re looking at is a mount that allows you to mount your Reolink RL36N NVR in a 19" RACK cabinet. It consists of two symmetrical elements. As for installation, the mounts are designed for the RL36N NVR, but I’m unsure if they’ll…

Downloads
693
Likes
49
Rating
5
P
Printablesathlon64

Box NVR

Корпус для видеорегистратора. Плата NVR с алиэкспресса. Корпус спроектирован под диск HDD 3.5 Ножки использованы от старого системного блока. Можно напечатать свои если нет других. Крышка крепится на саморезах.

Downloads
492
Likes
28
Rating
0
P
PrintablesBetaMax

ReoLink NVR Rack Brackets

Brackets to mount the ReoLink NVR to a standard 19" Network Rack. They were modeled using the RLN8-410NVR. From what I can tell, this should work with the RLN16-410 as well. *NVR side screws will need to be changed to M3x10mm

Downloads
448
Likes
43
Rating
5
P
PrintablesOndřej Hladík

NVR box

Box for NVR (network video recorder) bought on Aliexpress. It is divided into two parts, one for the NVR itself and the other for the 3.5" HDD. Printing without supports, Infill: 15-20%. Share your printed model.

Downloads
404
Likes
20
Rating
4.5
P
PrintablesEvillNooB

Rack mount for Hikvision 7600 Series NVR with step file

The NVR is shifted forward for about 60mm, suitable for shallow rack cabinets where there's not enough depth the height is also slightly higher than 1U because it holds the NVR from the bottom, not a problem if you leave a bit of space…

Downloads
368
Likes
27
Rating
5
P
PrintablesSavely LIVE

hi3536d nvr box for openipc

Print any filament, 0.5 width and mount nvr. Cover2 for mount rtl8812au 150mw reciever. Drill holes for ant where you need.

Downloads
326
Likes
11
Rating
0
P
PrintablesJeff Kinart

NVR Wall Mounts

A quick model of two wall mounts used to mount a DVD player or NVR to a wall

Downloads
277
Likes
14
Rating
0
P
PrintablesJH3D

Reolink NVR Recorder Wallmount

Wallmount for the Reolink NVR Recorder.

Downloads
260
Likes
38
Rating
5
P
PrintablesWakakaeheh

Hikvision NVR

Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Layer Infill: 30% Filament brand: Generic Filament material: PLA

Downloads
239
Likes
20
Rating
5

Unifi Protect Instant NVR holder for RACK 10"

10inch rack holder for NVR unifi protect instant. Printed from PETG, holes are 5.8mm, so M6 screws can be directly used. Use big zip tie in the middle, as shown on the photo. Tight litle bit more, for firm hold. NVR can easily slide…

Downloads
224
Likes
12
Rating
5
P
Printablesdawm

Reolink NVR (RLN8-410) 1U brackets

I wanted to rack mount my reolink RLN8-410 NVR and found the original model lacking in some areas and the dimensions were off from my exact unit (Purchased Nov. 2024). So I recreated the original footprint, resized and made it a single…

Downloads
183
Likes
13
Rating
0
P
PrintablesThe Finch

Dahua NVR Rack Mount

I made this mount a 8 PoE - Dahua - NVR4108HS-8P-4KS2/L in a standard network rack. You will need to remove the screws from the side of the NVR and replace them with slightly longer ones.

Downloads
153
Likes
8
Rating
0
P
PrintablesDDRBoxman

Reolink NVR (RLN8-410) 1U brackets - beefy with keystone jack

Print twice and you'll need M3x10mm screws to replace the original screws on the sides of the unit.

Downloads
143
Likes
14
Rating
5
P
PrintablesKevin Hauser

Reolink NVR Wandhalterung

Dies ist eine Wandhalterung für das Reolink Aufnahmegerät NVR RLN8-410. Zum Drucken werden Stützen benötigt. Ich empfehle die Baumstruktur (siehe letztes Foto). Die Halterung wird mit drei Schrauben befestigt. Ich habe die Wandhalterung…

Downloads
143
Likes
20
Rating
5
P
PrintablesPrime

Reolink NVR Rack Mount Slide in with KeyStone Jack

I added a Keystone Jack so i could easily access the Network Port of the NVR.

Downloads
127
Likes
11
Rating
0
P
PrintablesGlen Bayley

Reolink POE NVR Power Adaptor Wall Mount

This is a custom wall mount for the power brick that was shipped with a Reolink RLN16-410 in May 2025, in the US. Dimensions of the power brick are 7 ½" x 3 3/8" x 1". It is not Reolink branded, so a decent chance they source different…

Downloads
124
Likes
22
Rating
5
P
PrintablesKenny

openipc NVR-BOARD

NVR board 3Dmodel for hi3536 for case build

Downloads
105
Likes
8
Rating
0
P
PrintablesWadim

NVR box for board 9CH XM8536E

The case is made for a cheap popular video surveillance board from Aliexpress (46х118mm 9CH NVR). To store the recording, I use an old solid-state hard drive without a case 65x42 mm. This model does not use screws. Assembly sequence:…

Downloads
94
Likes
7
Rating
0
P
Printables2theMAX

WIP OpenIPC NVR FPV/HiSilicon HI3536D Fan Case and Lid

WIP model of my NVR Case for use with OpenIPC FPV and Ground Stations. This case is a remix of W's case that he posted on the OpenIPC Telegram page. Thx for getting me started. This case features the following: 50x50x10mm 12v fan slot,…

Downloads
94
Likes
9
Rating
0
P
PrintablesBenjamin

Reolink NVR Recorder Wallmount with screw hole

I needed to wall mount a Reolink RLN36 NVR and JH3D's solution was perfect with the only exception being it was hard to screw in as there was no easy access for my cordless drill for the bottom screw hole.

Downloads
89
Likes
17
Rating
5
P
PrintablesAnrabbarna

Hikvision NVR Rack mount

There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…

Downloads
76
Likes
7
Rating
0
P
PrintablesSimon willmoth

ReoLink NVR mount

I printed 4 of these with 4 walls, and 40% infill. 4 Top & Bottom layers. Probably overkill.

Downloads
75
Likes
5
Rating
0
P
Printablesksk

Box NVR 32CH larger pcb

The model is converted to step and it's expanded to fir larger nvr pcb for 32CH and 36CHThe model is converted to step and it's expanded to fir larger nvr pcb for 32CH and 36CH

Downloads
70
Likes
1
Rating
5
P
Printablesjjq787

Ingenic A1 NVR case - new board layout

Remixed the original excellent design for the board I just received There were 3 changes to accommodate the newer style NVR board: 1. Moved the 3.5mm jack and RJ45 down further 2. Made the case wider so the RJ45 wouldn't run into the…

Downloads
54
Likes
4
Rating
0
P
Printablesjibril

ReoLink NVR mount reinforced

Is the same file with only a reinforcement

Downloads
51
Likes
5
Rating
0
P
Printablesthemactep

Ingenic A1 NVR case

Please be aware that here are mulitple variants of the board with slightly different layout of ports. You might need to adjust included OpenSCAD file to match your hardware and regenerate STL files from it.

Downloads
48
Likes
3
Rating
0
P
Printablesabasson

Vivotek ND8322P NVR 1U Brackets

1U Rackmount brackets for the Vivotek ND8322P PoE NVR. Designed with 3mm thick walls for durability. Does require M3 screws to attach the brackets to the NVR. Printed on the Creality Ender 3 v2 Neo. **It is not recommended to support the…

Downloads
41
Likes
1
Rating
0
P
Printablesthemactep

Ingenic A1 NVR Case (new board)

It's a development of a legacy model fitted to new PCB and ports layout. I include two cutouts that will let you fit-test the board without spending much time and plastic on printing the full model. To mount the NVR board to the bottom…

Downloads
40
Likes
3
Rating
5
P
Printables3DS3

Dahua NVR VESA-mountable case.

This is a case for the Dahua miniature eight-channel NVR N41C2P Series. It doesn't have a place for the harddrive, but it does for the fan. It requires nine threaded heat inserts for M3 bolts, as well as 4x m3x8 bolts. You can use the…

Downloads
36
Likes
3
Rating
0
P
PrintablesAndersen

NVR wall mount

for mount nvr on the wall

Downloads
35
Likes
3
Rating
0
P
PrintablesStanley

Mini-ITX bracket for NVR board NBD7808R-PL

This is bracket for NVR board NBD7808R-PL. Thank to this bracket, NVR board can be easily installed to Mini-ITX case. Print instructions Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40%

Downloads
32
Likes
1
Rating
0
P
Printableskjkriegel

IO Shield for MW-NVR-N5105V10 for Supermicro SC505 Chassis

IO Shield to mount Aliexpress NVR/NAS Board in SC505

Downloads
31
Likes
2
Rating
0
P
PrintablesHouge38

ReoLink RLN8-410 NVR rack mount

I wanted to consolidate my home networking equipment into a single 10" mini server rack so I designed this mount for my Reolink NVR. This is a 1U mount for the Reolink RLN8-410 8ch NVR. All functionality is retained and I have a seperate…

Downloads
21
Likes
4
Rating
0
P
PrintablesSamiSpami

ReoLink RLN36 NVR + JetKVM 1U Rack Mount Brackets

I designed these brackets to mount a ReoLink RLN36 NVR into a 19" rack. I believe it will also work for RLN8 and RLN16 (the version with vertical vents on both sides). Please verify the model and version of your NVR before printing. I…

Downloads
18
Likes
1
Rating
0
P
PrintablesJakub Moštěk

RACK NVR Holder

RACK NVR Holder

Downloads
17
Likes
5
Rating
0
P
PrintablesDom11

Reolink NVR Rack Bracket with USB

Modified bracket - added USB extension slot. Useful for USB flash firmware updates, mouse etc.

Downloads
16
Likes
6
Rating
0
P
PrintablesEthan

Reolink RLN36 NVR single-drive case with PoE conversion

What and why I wanted a smaller case for my Reolink RLN36 NVR given it's mostly empty when only using one drive. I was already using a PoE splitter to power it from my PoE switch, so I figured I'd move that inside the box too. This is a…

Downloads
16
Likes
18
Rating
0
P
PrintablesCeadd L

NVR Rackmount Left & Right

A custom rackmount I made for my NVR The model is bare with no holes, as shown in the photos I drilled them out after printing. Feel free to remix this, I just found it easier to drill the holes myself. Please leave a like and rating,…

Downloads
16
Likes
1
Rating
0
P
PrintablesOpenSensor.io

Enclosure for Ingenic "15$ NVR board" + SSD

This is an enclosure I designed for housing an Ingenic "15$ NVR board" + SSD drive. There is another model out there that is organized more flat, whereas this one positions the drive above the board vertically. I place 3 M4 screw holes to…

Downloads
13
Likes
2
Rating
0
P
PrintablesMr.Ten

NVR780 Rain Cover

Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.

Downloads
10
Likes
0
Rating
0
P
PrintablesM S

HIKvision nvr fan mod

My hikvision was too loud, so I added a noctua fan. Still too loud. Added a fan controller with a temperature sensor, still to loud. Placing the fan closer to the cpu and using the fan controller? cool & quiet. You need 2x m2.5 and…

Downloads
6
Likes
1
Rating
0
P
PrintablesHouge38

ReoLink RLN8-410 NVR rack mount button

Buttons needed to retain functionality when placing a ReoLink RLN8-410 NVR in the 10" mini rack mount I designed. Print quantity 8. RLN8-410 rack mount here:

Downloads
6
Likes
0
Rating
0
P
Printablesdavidmaker

Underdesk support brackets for HiLook NVR

Brackets to mount NVR under desk. I added pocket cutouts to allow TPU pads to prevent vibration being transferred to the desk.

Downloads
4
Likes
0
Rating
0
P
Printableselbakkali

Ingenic A1 NVR Case (NG board) - Compact, Snap Fit, Screwless SSD Tray

A compact enclosure for the Ingenic A1 NVR board (NG variant, 130 x 50 mm) with a 2.5 inch SATA SSD mounted above it. ## Why it is smaller The original lays the board and the drive side by side, so more than half the footprint is empty…

Downloads
4
Likes
0
Rating
0
P
Printablesuntisci8

Side-Mount Fan Bracket for Dahua NVR — 40 mm Fan

We were unable to find a fan with holes on the side like the ones the video regulator ships with, so I made this. Hopefully it is obvious how to use. No pics, as I wasn't the one installing it.

Downloads
0
Likes
0
Rating
0
P
Printablesross anderson

NVR switch box with stop paddle

this is pretty self explanatory self tapping screws needed for the cover plate the paddle is designed to pop off to prevent breakages

Downloads
0
Likes
0
Rating
0
P
Printables

Hikvision NVR Rack mount

There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…

P
Printables

NVR780 Rain Cover

Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.

P
Printables

Underdesk support brackets for HiLook NVR

Brackets to mount NVR under desk. I added pocket cutouts to allow TPU pads to prevent vibration being transferred to the desk.