Search results: onfi

Sort order

569 models

P
PrintablesHardwareLab

Multiconfiguration WAGO Junction box FREE

This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…

Print approx. €7.95–€9.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8,768
Likes
4,940
Rating
4.83
P
PrintablesMakkuro

Wobbly letter cube keychain (configurable)

A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
1,408
Likes
158
Rating
5
P
PrintablesMakkuro

Letter bead keychain (configurable)

A keychain with your or your family/friends first name, written in individual letter beads. The beads are free to rotate and move after printing, so its also good for fidgeting. Note that this model is print-in-place, so no support…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
1,153
Likes
280
Rating
5
P
PrintablesMark Makies

Reconfigurable Portable 3D Pinball Thing

First look at 3D pinball I'm making out of old door latch solenoids that have been lying around doing nothing. As a kid I wanted to make a pinball machine. So with just a few solenoids, a 3D printer, and some bits and pieces I'm going to…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
15
Rating
0
P

Boost your multicolor prints! Central filament sensor mount with filament clips for single / double spool configuration for Elegoo Neptune 3 / 4 Pro Plus Max

Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…

Downloads
5,044
Likes
724
Rating
4.77
P
PrintablesBillyMayonaiz

P1P TPU Profile Configurations - Black Overture TPU

**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…

Downloads
5,000
Likes
145
Rating
5

Anycubic Kobra 3 Orca Profile V2 - Tested & Verified with 6 Configs + Heatbed STL

This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…

Downloads
4,845
Likes
274
Rating
4.33
P
Printablesdanibor09

Flying Bear Ghost 5 PrusaSlicer Config Bundle (with bed texture and bed shape)

This is my Flying Bear Ghost 5 PrusaSlicer Configuration Bundle. Settings are made for a fast print, while keeping good quality. PLA is printed at 200° C with printbed at 60° C and PETG is printed at 220° C with printbed at 60° C. If you…

Downloads
4,708
Likes
74
Rating
5
P
PrintablesMichael

Elegoo Neptune 4/Pro OrcaSlicer V2.0.0 config [New Firmware]

Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…

Downloads
4,566
Likes
245
Rating
5
P

Creality Ender-3 V3 KE config bundle for PrusaSlicer

My configuration for PrusaSlicer. I will gradually edit the profiles. Printer: Creality Ender-3 V3 KE Print Setting: 0.10mm and 0.2mm | SLOW, NORMAL and SPEED Filament: PLA, PETG, TPU (SPEED has disable auto cooling) 🆕 for all nozzles on…

Downloads
3,281
Likes
198
Rating
4.6
P
Printablesabbymath

Multi-Color Filament Configuration Disk: MCFCD

Do you have some new, fancy dual-color or tri-color filament to play with? Are you wondering which angle to best rotate your model before printing? This Multi-Color Filament Configuration Disk or “MCFCD” will help you determine the angles…

Downloads
2,415
Likes
245
Rating
5
P
PrintablesBrandon Wang

K1/K1 Max orcaslicer config

you need select klipper machine and import json files.

Downloads
2,188
Likes
189
Rating
0
P
Printablestmackay

Lament Configuration Puzzle Box

OG Lament Configuration for your Hell Priest or Kirsty Cotton cosplay in homage to the classic horror, Hellraiser. An actual, working puzzle box! Do you dare enter "The Labyrinth"? Updated for ease of printing and assembly. It's still a…

Downloads
2,137
Likes
402
Rating
4.95
P
PrintablesMar Ber

Konfigurierbare Box (incl. Fusion File) - configurable Box

deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…

Downloads
1,961
Likes
416
Rating
5
P
PrintablesMechVince

Elegoo Neptune 4 Pro PETG config bundle

I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…

Downloads
1,942
Likes
134
Rating
5
P
PrintablesCamaro45th

K1 Max CFS w/ Orca Config & Test Print 7/9/25 Update

Update 7/9/25- I am uploading a new file for this as the Y coordinates changes when adding the CFS upgrade kit. The new Print Volume is 300x295x300 as per Creality Wiki. I discovered this issue when trying to print my Z offset test and I…

Downloads
1,716
Likes
89
Rating
5
P
PrintablesSavageLau

Printer Config

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
1,623
Likes
63
Rating
5
P
PrintablesSSX556

BentoBox v2.0 5015 pull-configuration case+shroud

Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…

Downloads
1,620
Likes
300
Rating
4.88
P
PrintablesCamaro45th

K1/K1C/K1SE CFS Upgrade Orca Slicer Config-Test-v8

Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…

Downloads
1,616
Likes
99
Rating
5
P
PrintablesAboshi

Kingroon KP3S Klipper Configs and Firmware

Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S

Downloads
1,535
Likes
115
Rating
5
P
PrintablesSlurpeeMachine

Dark Souls Bonfire (LED Candle Remix)

This is a remix of ClassyGoat's Dark Souls Bonfire . I also used Dekotale's remix with the separated sword. I edited the bonfire base in Tinkercad to allow for a LED votive candle to be inserted/glued through the bottom. I was going to…

Downloads
1,434
Likes
373
Rating
4.94
P

TPU Test Cube Prusa MK3S with Config for Ninjaflex

This is simple test cube of 20mm dimensions with a 10mm hole. The Fusion 360 file is included as well. I had a lot of trouble getting TPU to print and wanted to share how I did it. For adhesion issues on the MK3s I used blue tape on the…

Downloads
1,257
Likes
38
Rating
4.86
P
PrintablesMortalWombat

Kingroon KP5L Starter Kit & Klipper Config

The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…

Downloads
1,071
Likes
41
Rating
5
P
PrintablesBanditFPVprints

Bambu labs 3D Printed RC plane configs

Configs with recommended PrusaSlicer configs into Bambu Studio specifically for 3D Lab Print models - does not work for Cura Surface mode models, not available in Bambu Studio. Internal structure correctly prints :)! See json files in…

Downloads
1,035
Likes
41
Rating
5
P
PrintablesTheKawna

Darksouls Bonfire

The bonfire from the Darksouls game series. Print instructions printed at the default size it doesn't really need supports till you get to the hilt, its gets a bit wobbly up that way. I am unsure about support needed at smaller sizes.

Downloads
1,032
Likes
79
Rating
5
P
PrintablesChris Hill

Spool holder (1kg or 2kg) for Original Prusa Enclosure - Configurable

This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…

Downloads
921
Likes
208
Rating
4.95
P
Printablesaottesen

HP EliteDesk Mini 800 G5 Under desk-mount (Confirmed that it suits the other G-models as well)

Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…

Downloads
919
Likes
68
Rating
5
P
PrintablesWagZ

FLSun V400 Prusa Configs

So here's a config bundle. This bundle includes all the profiles ive made specifically for my stock FLSun V400. It also includes the V400 printer configs as well. The Profiles ive made included some layer heights from 0.1 up to 0.3 layer…

Downloads
917
Likes
82
Rating
5
P
PrintablesBrandon Wang

Creality K2 Plus orcaslicer config

download the K2Plus_orca_config.3mf import to orcaslicer

Downloads
859
Likes
79
Rating
0

Bonfire

Bonfire I've made! Enjoy! Take a look at my Tribes or Patreon if you like my stuff! I really appreciate it! Category: Games

Downloads
848
Likes
91
Rating
5
P
PrintablesSteve Hodge

Hellraiser / LeMarchand / Lament Configuration Puzzle Box

A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…

Downloads
834
Likes
180
Rating
5
P
Printablesslemmin

Configurable Parametric Project Box

This box is intended to be customized, the default configuration probably won't work for very many people. Simple changes like box size can be made with the OpenSCAD customizer but due to limitations in its capabilities most of the really…

Downloads
824
Likes
79
Rating
5
P

Gridfinity Storage Box Label (configurable)

This is currently an untested print! I am sharing this because this is a start/attempt to generate the labels for this box Print Instructions Print instructions haven't changed compared to the original model Label Recommended profile:…

Downloads
801
Likes
166
Rating
5
P
PrintablesPeter Farell

Hellraiser Lament Configuration

Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…

Downloads
793
Likes
135
Rating
5
P
PrintablesLoboCNC

Reconfigurable Multi-jaw Vise

This multi-jaw vise consists of a base plate and 3 or 4 rack & worm jaw units. Pins in the bottom of each rack slip into keyhole slots in the base for quick reconfiguration. Each jaw slides onto grooves in the rack, trapping a worm/knob…

Downloads
791
Likes
493
Rating
4.8
P
Printablescurcuz

Lian Li O11 Dynamic GPU anti-sag for bottom fans configuration

I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…

Downloads
787
Likes
82
Rating
5
P
PrintablesdjeZo888

OrcaSlicer KobraMax 0.8nozzle PLA config

OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…

Downloads
772
Likes
15
Rating
5
P

Configurable Slim Wallet

A slim wallet for credit cards etc.. Simply configure it the way you like it and that suits your needs. No support needed! ---- Updates 31/7-2022 - New Sideplate: Hexagon with Printebels logo. 9/8-2022 - New Sideplate: Striped. ---- First…

Downloads
759
Likes
175
Rating
5
P
Printablesironfinch

Card Deck Holders (many sizes configurations)

These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…

Downloads
751
Likes
112
Rating
5
P
PrintablesDasLukas

Moon Lamp Adapter Hidden Socket - Configurable

Motivation: After having issues with my existing lamp sockets in finding a suitable stand for my Moon Lamp, I decided to create a new adapter. With this adapter, the majority of the socket is concealed within the adapter itself, and…

Downloads
697
Likes
300
Rating
5
P
PrintablesCdnMade

Monoprice Mini v2 Orca Config

I wanted to start using Orca for all my slicing needs so i made this Profile for my MPSM. It might not be great but i tested it with a few prints and it worked pretty good. I had no issues. unzip the file and import the config. Includes…

Downloads
678
Likes
25
Rating
0
P
Printablesmothdotmonster

VisionFive 2 Snap-Together Case

This is a snap-together case for the VisionFive 2 single board computer. I have included both a slotted version (which you'll probably want if you just want to use it as-is) and a solid version (primarily for if you'd like to modify the…

Downloads
673
Likes
29
Rating
5
P
PrintablesStealthNode

Raspberry Pi 4B Case - Configurable

About This is a Raspberry Pi 4B case that has a few configurations for different scenarios. The two parts of the case snap together and can be release by pushing in the front sides and lifting up. This case was designed in OnShape.…

Downloads
613
Likes
15
Rating
4.75

Reconfigurable 22.5 & 45 Degree 3-Way Elbows, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings UPDATE 2015-07-03

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…

Downloads
576
Likes
191
Rating
5
P
PrintablesBombastus Hands

Configurable Router Template Set

As you will know from working with a wood router , there are many calculators and tools to dimension your templates. Still, after calculating you have to build the template yourself. Here's your all-round package: calculation and design…

Downloads
555
Likes
99
Rating
0
P
PrintablesIce992

K1 Max PrusaSlicer Configs for PLA & ASA

K1 Max PrusaSlicer Configs for PLA & ASA Includes my base settings for the K1 Max for PrusaSlicer. The printer config itself has GCode for disabling case/side fans for ASA, and enabling them for PLA. These are rough setups which I haven't…

Downloads
553
Likes
16
Rating
0
P
PrintablesAsk Lysdahl

Prusa Slicer Flashforge AD5M Forge-X config bundle

Install Forge-X on your printer and set it up: https://github.com/DrA1ex/ff5m Import the config bundle into Prusa Slicer and add the build plate STL to the printer profile.

Downloads
551
Likes
14
Rating
5
P
Printablesroman_hegglin

Customizable Atom Deluxe (every element preconfigured)

Choose your favorite Element and print it out. No, not the Atom itself, but a bohr-model of the atom anyway. Feedback requested! Let me know if you are about to discover some new elements! I gladly extend my script with your new…

Downloads
548
Likes
44
Rating
4.56
P
Printableslorez42

Configurable Temperature Tower

I needed a bit more range than some other temperature towers, so I made a configurable Temperature tower based on: https://www.printables.com/model/38895-temp-tower-prusaslicer-02mm-layer-petg https://www.thingiverse.com/thing:2493504…

Downloads
542
Likes
29
Rating
5
P
PrintablesN9

Anycubic Slicer Config Kobra 2

This is a slicer config file for the Anycubic Slicer (tested on 1.3) that will work on any Kobra 2 model. You may have more configurable options but the main settings in this file will help almost everyone. Added Gcode before and after…

Downloads
534
Likes
27
Rating
0
P
PrintablesJames J

Filament Runout Sensor w/ Basic Klipper Config

Attached PDF contains documentation on how to wire a Filament Runout Sensor using micro switch and a LED indicator for using with any 3D Printer control board, such as a RAMPS. Documentation contains basic configuration info for use on…

Downloads
528
Likes
15
Rating
0
P
Printablesjvidal

Configurable size card box

This is not only another simple card box, but it is a fully configurable card box for every card size you need. I decided to build my version, adding some improvements and ensuring anyone can modify the inner size easily. You can find 3…

Downloads
524
Likes
147
Rating
5
P
Printablesjamesgt

Bonfire sword

Bonfire sword from Dark Souls created for my friend for a cosplay event. As existing models were not detailed enough I decided to learn more of the wonderful replicad project and designed this sword. This is not a miniature, the model is…

Downloads
517
Likes
165
Rating
5
P
PrintablesMakkuro

Configurable cable label

Configurable, print-in-place, self-locking cable label. You can adapt the shown text and cable diameters. Just a single color change is needed to make the text stand out on both sides. It prints fast and you can print many labels in one…

Downloads
489
Likes
124
Rating
5
P
PrintablesDarren Lynch

ModuBox - Gridfinity compatible, configurable, box

TL;DR This is Modubox, a modular, expandable box Compatible with gridfinity If you like it, consider making a donation [ PayPal | BMaC ] To support this and future developments, consider becoming a patreon [ patreon ] Introduction ModuBox…

Downloads
473
Likes
89
Rating
0
P
PrintablesTMskillerTM

Advanced Neptune 3 Series Klipper Configuration (FULL RELEASE)

UPDATES 2025.08.08: Testing v2 Troubleshooting the problem with PID config (removed control = pid from [extruder] section) Fixed problem with position_endstop error (changed position_min in [stepper_z] section to -3.5) Improved clarity of…

Downloads
467
Likes
40
Rating
5
P
PrintablesMakkuro

Chain of Letters (configurable)

A keychain with your or your family/friends first name, written in individual letters , which form a flexible chain after printing. The chain is fun to fidget with :-). Note that this model is print-in-place, so no support material is…

Downloads
458
Likes
97
Rating
5
P
PrintablesChris Culpepper

Skadis Sharpie Holder - Configurable

This is a holder for Sharpies to clip them onto a Skadis pegboard. You can alter the .scad file for number of sharpies and height. The 45 degree cut in the print allows you to print it without support, and include the top and bottom…

Downloads
445
Likes
85
Rating
5
P
Printablesnevax

Configurable acceleration ghosting/rigging test print

Acceleration speed of 6 stages are configurable in slicer. Default configured values, update it as you wish: Perimeters Extermal perimeters 30 19 35 21 40 23 45 25 50 27 55 29 Use any filament, i personally use Prusament PETG glossy black…

Downloads
440
Likes
21
Rating
5
P
PrintablesDany

Gridfinity bins with labels (configurable) / Contenant avec etiquettes (configurable)

VERSION 2 (2023-08-16) I recreated everything from scratch in OpenSCAD The stackable issue is fixed Chamfer (45 degrees) on the lid The label is a bit narrower in this version You can easily edit it and add the label you want (see HOWTO…

Downloads
437
Likes
69
Rating
4.8
P
PrintablesJimbob

Modular Storage Box - Additional Drawer and Box Configurations

After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…

Downloads
414
Likes
90
Rating
0
P
PrintablesKatharsis

Configurable Belt Drive for First Stage of Transmission - 1/10 RC Drift

Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this EDITS: 1/26/24: Added multi-body STL for the…

Downloads
389
Likes
54
Rating
0
P
PrintablesJulian G

Configurable USB drive case

I had an old USB drive around with a broken mechanism in the case so I decided to print a new one. The openSCAD model is very configurable, so you can configure this for your USB drive, or whatever else. One possible improvement I would…

Downloads
385
Likes
30
Rating
5
P
PrintablesPlants X Tech

Pill Boxes Snapfit & Frictionfit

Wife wanted a pill box, designed two. Works for what it was designed for. Designed to print at .2mm layer height, haven't tested it at .3 yet.

Downloads
371
Likes
54
Rating
5
P
PrintablescamelCaseOnly

FLSUN T1 PRO Configuration Improvements

These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…

Downloads
369
Likes
50
Rating
5
P
PrintablesDC3D

Box the Configurable

Box the Configurable came to be as attempt to make a parametric design where a very few parameters had to be changed to get a new use. the file names have DxBxH in them where D and B has to be the same value to have the top part and the…

Downloads
353
Likes
106
Rating
5
P
PrintablesLeon.Reijnders

Variable Box Konfigurable by Freecad Spreadsheet

Configurable Box in Freecad using Spreadsheet. Length, Width, Height, Wallthickness, Drillholes can be modified on a easy Way.

Downloads
352
Likes
29
Rating
5
P
PrintablesSvanGool

OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+)

OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+) This configuration is used for monitoring and controlling a Prusa MK3S(+) remotely using the OctoPrint software suite ( https://octoprint.org/ ) an RPI4B (…

Downloads
349
Likes
86
Rating
4.67
P
PrintablesN0dr4C

Orca Slicer config - Prusa MK4S + MMU3 (based on PrusaSlicer export)

Here is my personal configuration file for my Prusa MK4S + MMU3. I first imported PrusaSlicer configuration and adapted some bad conversion parameters and optimisation (for my usage). PETG and PLA profile No HF config Only 0.4mm nozzle…

Downloads
347
Likes
24
Rating
5
P
PrintablesJohan Vergeer

Configurable Stanley Fatmax Organizer Divider

This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…

Downloads
342
Likes
37
Rating
4.5
P
PrintablesRoger

1:29 scale SP Configuration Motorized OpenRailway EMD SW 1500 G Scale Locomotive

I am preparing to design and build a Krauss-Maffei locomotive, so I wanted to practice 3-D printing an entire locomotive. I used Daniel Noree's base design for the OpenRailway EMD SW 1500 and printed a 1:32 version of it that incorporated…

Downloads
338
Likes
56
Rating
5
P
PrintablesHelvedo

Dark Souls Bonfire Coaster

I made a dark souls themed coaster with the iconic bonfire on it for a friend of mine. It was painted in bambu studio, but can also be printed with one color. i would reccomend to print it at 120% upscale and around 30% infill to have a…

Downloads
336
Likes
43
Rating
0
P
Printablesdirtdigger

Reconfigurable Moto G Power Case

This is a variation of the case by kensikora ( https://www.thingiverse.com/thing:4425758 ) and mc88 ( https://www.thingiverse.com/thing:4589273/ ). I call it a variation rather than remix, because I cannot install 123 Design on Linux, and…

Downloads
333
Likes
18
Rating
0
P
PrintablesAcE Krystal

Toyota Roof Rack Key (confirmed on Prius 1.8)

I wanted to let someone borrow my roof racks for the Toyota Prius 1.8, but then could not find the key's anywhere. SoI gave them a drink, and I quickly did a 10-min design and 12-min speed print to make this working key. Hope it helps…

Downloads
331
Likes
10
Rating
0
P
PrintablesChris Hill

Bucket Grit Guard - Configurable

This is a ‘grit guard’ that will stop your car wash sponge picking up grit from the bottom of your bucket. It uses a hexagonal mesh because Hexagons are the Bestagons! Two STLs are included (flat mesh and deep mesh) but you can use the…

Downloads
324
Likes
39
Rating
5
P
PrintablesDenali jordan

ender 3 v3 ke prusaslicer config

The benchy is just there so i can post the config file

Downloads
319
Likes
34
Rating
0
P
PrintablesJosé Pedro

Kyojuro Rengoku Confident Pose

Embody the fiery spirit of a Hashira with this 3D printable STL model of Kyojuro Rengoku in a Confident Pose. This dynamic character figure is perfect for fans looking to add a powerful and inspiring piece from the Demon Slayer series to…

Downloads
317
Likes
29
Rating
0
P
Printablestmackay

Lament Configuration (Multi-Material)

See original for more options and details. Trying to keep this release nice and simple. Includes gold inlay as a separate model for a flush finish for MMU capable printers or dual extruders. Print both lower-art-v4.2.stl and…

Downloads
317
Likes
61
Rating
5
P
PrintablesJohn5

VKB STECS Base & Back Plate Reconfiguration Pack v1.0

VKB STECS Base & Back Plate Reconfiguration Pack v1.0 Created by John5 CC BY-NC-SA 4.0 Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for…

Downloads
316
Likes
32
Rating
5
P
Printables0xedd1e

Configurable snap-in PCB mount

A simple mount in which the PCB dimensions are parameterized using FreeCAD's spreadsheet functionality and that can be secured using two screws. Screw radius is also a parameter to be configured (1.5mm as default). Print settings I used…

Downloads
311
Likes
28
Rating
5
P
Printablesarminth

Configurable Height Test

Quick test to check if your printer can cope with a specified height. Use configurator to create your desired model height. Category: 3D Printer Accessories

Downloads
305
Likes
2
Rating
5
P
PrintablesAubsUK

Fully 3D Printed 4-Segment Configurable Storage Box With Hinged Lid and Clasp

Edit 2023-02-18 - 4-Segment_Configurable_BoxV01.01.f3d Fixed the fillet to the top of the lid where it disappeared when the number of clasps/hinges were changed. Added a fillet to the underside of the hinge bar so it opens and closes a…

Downloads
304
Likes
25
Rating
0

Soroban - Fully Parametric & Configurable Abacus

I recently watched a video of Japanese school kids using their Soroban to calculate at incredible speed; apparently it also helps with learning to do very fast mental calculation. I was impressed, and wanted to try and learn that – after…

Downloads
299
Likes
39
Rating
4.5
P
Printablespahlito

Z Offset Callibrationfield v.2

Z Offset callibration field. Set the height to the mm how thick the first layer should be and be calibrated.

Downloads
292
Likes
0
Rating
0
P
PrintablesToDamLazy

Samsung S24 Ultra Dock + Configurable .3fm File

I liked the design of the iPhone Dock which is a remix of, however, when I opened the provided model files I saw it wouldn't be easy to modify the size to fit my Samsung S24 Ultra. Instead of simply messing with the original model I…

Downloads
291
Likes
50
Rating
3
P
Printablestmackay

Lament Configuration Art Cube (Embossed)

The Lament configuration - art by artist064 "The original Lament Configuration was created by Simon Sayce for the original Hellraiser movie". I have attempted to remain faithful to the original design, however it is apparent that multiple…

Downloads
289
Likes
20
Rating
5
P
Printablespowtac

Cylinder Configurable

A simple geometric column/cylinder that is configurable via Customizer and OpenSCAD. Print instructions Unassociated tags: säule Category: Other Summary A simple geometric column/cylinder that is configurable via Customizer and OpenSCAD.

Downloads
287
Likes
5
Rating
0
P
PrintablesMakkuro

Configurable Stencil

This is a fully configurable stencil. Customize To get a proper stencil, install OpenSCAD and a stencil font on your own computer and follow these in depth instructions . You just activate the customizer and can change the text to your…

Downloads
280
Likes
67
Rating
5
P
PrintablesTMskillerTM

My Neptune 3 Pro Klipper and Orca config

INFO My Neptune 3 Pro configuration files. It consists of multiple files, some have essential macros, some have macros to make it more userfriendly and there's a central file with variables to control most macros. My hardware: Skr 1.4…

Downloads
277
Likes
12
Rating
0
P
Printableskaje

SPLA Print Parameter Test and Config file

Edit May 1, 2021 : I suggest using the improved version of this: https://www.prusaprinters.org/prints/65520-spla-print-parameter-test-and-config-file-improved SPLA is a filament type offered by SunLu. Although the name implies it is…

Downloads
274
Likes
2
Rating
0
P
Printableszbzzn

Sika Sealant Nozzle (configurable)

A nozzle that fits Sika containers (not the regular silicone ones!) You can configure the nozzle length and diameter in the link below…

Downloads
263
Likes
19
Rating
4
P
PrintablesPessimizer

Confidently Walking Scootaloo

Scootaloo, just walking around. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645 Print instructions The model comes in two variants: one…

Downloads
261
Likes
46
Rating
5
P
PrintablesSteve DeGroof

Configurable Card Box

NOTE : This is a WIP, and part of a larger project. Things might change. To create a card box, copy all 4 SCAD files into the same folder, edit CardBox.scad to set the dimensions, and render. The main variables are: //width of a card…

Downloads
260
Likes
28
Rating
5
P
PrintablesScott C.

Another first-layer test print - slice it for your printer's configuration!

Have you ever wanted to redo your first-layer calibration, but you have a 0.6mm nozzle installed (or some other variant configuration)? The STL file below allows you to slice a first-layer test print for your printer's particular…

Downloads
260
Likes
6
Rating
5
P
PrintablesRandom Guy

Prusa Silcer config for Neptune 4 (Pro)

Configurations for : Extrudr PLA NX-2 (works with allmost every PLA) Prusa PETG (or any other but keep an Eye on the Temperatur settings your using) Extruder TPU A97 (Medium) Fiberlogy ASA Fiberlogy Easy ABS Extrudr PETG Fiberlogy Easy…

Downloads
254
Likes
15
Rating
0

toothbrush holders (different models an configs)

Bathroom brush holder 06/25/2025 add new model with support plate for click Practical holder for toothbrushes, toothpaste and mouthwash. Different configurations for placement above the wash, or also placed on the wall. The default models…

Downloads
251
Likes
35
Rating
5
P
PrintablesBITaMinD R+D

KÅJJA - Fully Configurable parametric 80s pencil box.

Parametric pencil box inspired on one I had in my childhood, Is fully parametric modifying parameters in Spreadsheet. Both the lower an upper parts have insertions for separators and pencil holders. The upper part has also those…

Downloads
248
Likes
74
Rating
0
P
PrintablesDominik

Configurable Household Task Planner

V2 update The items are now much easier to write - you can provide them as a comma separated list, which incidentally allows using of various online customizers. ---- Heavily inspired by Nils Kal's Household Task Planner , except…

Downloads
246
Likes
78
Rating
5
P
PrintablesMartinCrow
18+

The source marked this model as adult content.

Downloads
246
Likes
111
Rating
5
P
PrintablesTurtulino

Quick isometric perspective drawing dot grid template - Configurable

It is not a difficult model but there are some important details that must be taken into account so that it prints well. I recommend reading the printing instructions. Description and operation This template allows you to create an…

Downloads
246
Likes
132
Rating
5