Search results: opener

Sort order

2,004 models

P
Printablesquattro

Hexagonal One-Handed Bottle Opener (Updated!)

Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…

Downloads
19,288
Likes
5,600
Rating
4.88
P
Printablesfifindr

Beverage Can Opener

Beverage Can Opener – No more struggling with stubborn tabs or ruining your manicure! This simple but smart tool makes opening beverage cans smooth and easy. Turn off arachne mode, 3 outer walls, 20% infill, 7 bottom and top layers. ✅…

Downloads
12,000
Likes
1,584
Rating
4.95
P
PrintablesBUDS3D

BEER/POP CAN OPENER/PROTECTOR/BUG FREE TOP

Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…

Downloads
4,478
Likes
604
Rating
4.87
P
Printablesquattro

Overengineered Bottle Opener and Cap Thrower (OBOCT)

Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…

Downloads
2,888
Likes
728
Rating
4.95
P
PrintablesDrLex

Fully 3D Printed Compact Bottle Opener

The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…

Downloads
2,408
Likes
109
Rating
4.9
P
PrintablesObe_Design

Bottle Cap Opener

This ergonomic bottle opener is designed to easily twist off caps ranging from approximately 26mm to 34mm in diameter . Ideal for people with reduced hand strength, such as seniors or children, it features a well-shaped handle that offers…

Downloads
2,035
Likes
499
Rating
4.88
P
Printablesgillis

Bottle Opener

I have made bottleopeners before but this is, maybe, final version. All are 40 x 90 x 6mm, for the coin-versions the diameter and height differs. Print with 100% infill for strength. When you open a bottle, hold your whole hand around the…

Downloads
1,236
Likes
116
Rating
5
P
Printablesloeschzwerg

Key Switch Opener

A simple key switch opener for split housing clamps. Print it two times, stick it together, BAM! awesome working switch opener. Have a switch-puller? Use it like in the pictures for better pulls. For all your switch opening needs:…

Downloads
836
Likes
66
Rating
4.67
P
Printablesfifindr

Universal Bottle Cap Opener Mini

A compact and efficient mini universal bottle cap opener designed for everyday use. 🧴 Works with most PET bottle caps in the 27–35 mm range ⚙ Stronger, lighter, and faster to print than the original version 👌 Fits easily in a pocket,…

Downloads
752
Likes
186
Rating
5
P
PrintablesMichal Petrák

bottle opener/cap

bottle opener/cap

Downloads
748
Likes
146
Rating
4.83
P
PrintablesGhost91

Door opener - fight Coronavirus (Covid-19)

I designed a door opener to fight aganist the spread of the Coronavirus (Covid-19). You can avoid touching the doorknob with this 3D printed door opener! Please share this design so we can stop the coronavirus epidemic! Print instructions…

Downloads
717
Likes
19
Rating
0
P
PrintablesMetikumi

Bottle Opener for the Elderly or People with Disabilities

Older people often have trouble opening plastic bottles. Also, people with gout or other disabilities lack the strength to turn the small caps independently. The reason is the small diameter of the caps, which requires a strong grip with…

Downloads
684
Likes
146
Rating
5
P
PrintablesGonper

No Touch Tool, retractable, door opener, key turning, pinch papers, push buttons...

I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…

Downloads
548
Likes
121
Rating
3.5
P
PrintablesSirPrintsALot

Tesla Model Y Garage Door Opener Mount

Wanted to mount my garage door opener above my visor in my Tesla Model Y so I made this. You will need to glue the 2 parts together. Let me know if this also works on any other cars. Haven't been able to test on a Model 3 but it might…

Downloads
460
Likes
74
Rating
4
P
PrintablesAdam

Wall mount for garage door remote opener

This is an easy-to-print wall mount bracket for your car visor mounted garage door remote. I've tested it with a Chamberlain 953ESTD, but the visor clip seems to be quite standard. Design features The backing plate ensures that you will…

Downloads
416
Likes
55
Rating
5
P
PrintablesHenk

Letter opener

Update: In case it does not work as expected, I have published also an improved version. I printed the original model because I had a spare blade for my Facto knife. However I have many more blades for a Japanese style hobby knife. You…

Downloads
337
Likes
113
Rating
5
P
PrintablesKutilman Yuri

Shopping cart opener - works in many countries

This small gadget will let you open most shopping carts for euro coins. To use in other countries, please scale (in all axis) to different size. I noticed there are many gadgets of this type, but I designed this one from scratch and…

Downloads
297
Likes
27
Rating
4.75
P
PrintablesAyush

BATMAN BOX OPENER - TESTED

Easy to print - Easy to handle Perfect for openeing your boxes

Downloads
246
Likes
44
Rating
5
P
PrintablesSteveS42

Jar Opener Wrench

This is a wrench I designed to fit a 66mm diameter jar lid. I made it in ABS with 4 perimeters for strength.

Downloads
240
Likes
34
Rating
5
P
Printablesdz0ny

Audi Bottle Opener

Fits 20c coin Supports Hex screws

Downloads
208
Likes
20
Rating
5
P
PrintablesPMW0508

Bottle opener topology optimized

Print it laying flat on the built plate and use supports (Like shown on the image with the built plate). Use PETG as PLA has grip problems while opening!

Downloads
199
Likes
21
Rating
4
P
Printablesfifindr

Jar Vacuum Releaser + Bottle Cap Opener

Use tree supports, 25% infill + 3 walls. A compact multi-purpose kitchen tool designed for opening vacuum-sealed jars and glass bottle caps. The curved front section works as a jar vacuum releaser by slightly lifting the lid edge and…

Downloads
192
Likes
79
Rating
5
P
PrintablesLumanieri

Durable Bottle Opener with Magnets

Hello. I give you the last bottle opener you will need. This design incorporates an internal cavity that you can place five 10x2mm round magnets in, or a 10x10 round magnet. I have provided a print file that has the print pause already…

Downloads
152
Likes
39
Rating
5
P
PrintablesDema_Design

Bottle opener 2in1

Simple bottle opener

Downloads
148
Likes
30
Rating
5
P
PrintablesMiroslav K.

Bottle opener V2

Bottle opener for caps up to 28mm I print on 3 perimeters and infill 15%. Printed from Prusament PETG Urban Grey.

Downloads
129
Likes
18
Rating
5
P
PrintablesSquasherJoe

.50 BMG Bottle Opener

1:1 .50 BMG bottle-opener The creator of original model reccomends 90% concentric infill and a horizontal orientation for PLA. I would recommend an equal infill density for the weak points if you are using PET-G. There is a PET-G print…

Downloads
123
Likes
18
Rating
0
P
PrintablesRiddoch Labs

Buffalo Bills Josh Allen Bottle Opener

Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!

Downloads
123
Likes
13
Rating
0
P
PrintablesREMLURELMI

Letter Opener - fast print, no supports.

Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.

Downloads
120
Likes
6
Rating
5
P
Printableskiam02

Washing machine door opener Beko WMB 71643 PTE

Washing machine door opener Beko WMB 71643 PTE too bad the orginal is broken and i was asked if i can construct it print. After 2 days of inactivity, the washing machine washes again. ;) Print instructions Rafts: No Supports: Yes…

Downloads
111
Likes
11
Rating
5
P
PrintablesDonBorste

Glass-Bottle-Opener | Flaschenöffner für Glasflaschen

Passt… leider nur auf die 0,7l Norm-Glasflasche… aus ökologischen Gründen ( sicher ein Widerspruch ) also nicht für PET Flaschen, und aus Designgründen ( einen Tod muss man ja sterben ) nicht für andere Glasflaschen mit Schraubdeckel. Die…

Downloads
108
Likes
8
Rating
0
P
PrintablesBurt Simpson

Reinforced Jar Opener 73 mm

Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 73 mm model in the collection. Printing…

Downloads
100
Likes
9
Rating
0
P
Printableskaje

Bagopener - Plastic Bag Opener

This is a gadget for opening those very thin plastic bags (like cheap plastic trash bags) that always seem to be glued shut and are very annoying to get open. To use it you need add two pieces of adhesive tape (variously known as Scotch…

Downloads
76
Likes
8
Rating
0

"Open Up Buttercup" Jar Lid Opener - ( Jar = big mouth bottle)

Trouble opening pickles, peanut butter or apple sauce jars? Here is "Open Up Buttercup"

Downloads
67
Likes
6
Rating
0
P
PrintablesP-atix

Fallout coin bottle openers

Set of thematic Nucacola bottle opener, insert an useless coin inside for proper function. Coin dim.: Ø20mm x 1,9mm ±0,1 Color setup: 001.STL - Black / Blue / Yellow 002.STL - Black / Blue / Yellow 003.STL - Red / White 004.STL - Yellow /…

Downloads
63
Likes
16
Rating
5
P
PrintablesJiří Čálek

Phone display opener V1.0

You can print with pla and 15% infill

Downloads
57
Likes
6
Rating
5
P
PrintablesNozzle

Wera stubby bottle opener double holder

A holder for Wera stubby bottle opener

Downloads
51
Likes
3
Rating
0
P
PrintablesRosti

Safety Cap / Bleach Bottle / Tab lock Cap Opener

A simple tab clamp for bleach bottle ‘tab-lock’ caps and similar. Will accommodate caps with radius 20-50mm (external tab diameter) Suitable for anyone with a weak grip or forearm strength restrictions such as MS sufferers (one in…

Downloads
47
Likes
2
Rating
0
P
PrintablesFR3D

'Defence Viper' Letter Opener

the " Defence Viper " letteropener Product Description: Make an impressive statement on your desk with the " Defence Viper " - a revolutionary organic-designed letter opener. Versatile Ways to Carry: Thanks to its flexible design, the "…

Downloads
46
Likes
6
Rating
0
P
Printableskaje

"Safety Cover" for Chamberlain Remote Control Garage Door Opener

NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…

Downloads
45
Likes
3
Rating
0
P
Printables3DRijiy

Beer Bottle Opener

These super cool bottle openers make a great gift for your partner on their birthday or for your dad on Father's Day. The bottle openers are two color design printed on the front and a metal coin opener screwed into the back. The bottle…

Downloads
44
Likes
6
Rating
0
P
Printablescrashkg

Genie Garage Door Opener Replacement Button

My 20 year old garage door opener failed. The button stopped working. Rather than throwing it away I made a new one. works better than the original. Print with supports. I printed with PLA supports on TPU so removal was easy. Happy…

Downloads
42
Likes
4
Rating
5
P
PrintablesDROO

The Big DREW Bottle Opener

I made this to be cast into metals, it's basically my take on the yeti brick bottle opener, I made it to print on my mars 3 SLA printer, but it can and will print on an FDM, and it's functional too! superfun to spin around your finger.…

Downloads
28
Likes
4
Rating
0
P
PrintablesDavid79

Nuki Opener Ritto Base

Da ich in meiner Mietwohnung die Kabel vom Opener nicht schön verstecken konnte, habe ich diese Montageplatten entworfen. Montage des Nuki Opener an der Grundplatte mittels 2x M3x12 + Muttern. Verbindung der beiden Teile mit 2x M3x8 +…

Downloads
19
Likes
2
Rating
0
P
PrintablesColorful3DWorld

Keychain Strip & Lever Opener for WAGO 221 Series

WAGO 221 Keychain Multi-Tool: Strip Gauge & Lever Opener 💡 Project Summary A compact, pocket-sized 3D printed tool (keychain) designed to significantly accelerate and simplify wire preparation for WAGO Series 221 splicing connectors. This…

Downloads
18
Likes
12
Rating
0
P
PrintablesASIM Project

ASIM LOGO keychain bottle opener

ITA Ho realizzato questo portachiavi anni fa come uno dei miei primi progetti. E' difficile trovare on line un file modificabile quindi includo il file .step per utilizzarlo e remixarlo con il vostro logo e soprattutto con la vostra…

Downloads
17
Likes
5
Rating
0
P
PrintablesPb023_3D

Beer opener magnet fridge mount

Two versions avaliable: 15x4mm magnets or 12x3mm magnets. Both need an aditional 8x3mm magnet. Stop the print twice, one for the two botom magnets and another for the top magnet.

Downloads
17
Likes
3
Rating
0
P
PrintablesTripleB

Alfi bottle opener

If you got problems opening the Alfi Bottle, this “wrench” is here to help.

Downloads
15
Likes
0
Rating
0
P
Printablesprntmkr

Parcel Opener – Safe, Durable & Blade-Free

Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…

Downloads
24,270
Likes
4,459
Rating
4.79
P
PrintablesART TOO

BOX OPENER - TESTED

Easy to print - Easy to handle Perfect for openeing your boxes New model: https://www.printables.com/model/1113064-box-cutter-box-opener-v20-tested

Downloads
22,810
Likes
4,436
Rating
4.7
P
PrintablesART TOO

BOX OPENER V2.0 - TESTED

Made two new versions with a more durable tip. 2.1 New tip with wider angle 2.2 Extra edge blend added

Downloads
9,904
Likes
2,062
Rating
4.82
P
PrintablesArcher

Letter and Package Opener Knife - Letter Opener

Knife letter and package opener. Print flat on build plate with 0.10mm layers and 25% infill minimum. PETG, PLA, PLA+, Carbon fiber, etc. Only 18g of filament needed for 100% infill! Multiple options for LH, RH, with and without teeth and…

Downloads
9,707
Likes
1,239
Rating
4.96
P
PrintablesART TOO

BOX OPENER V3.0 - FINAL VERSION - (Tested)

Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!

Downloads
9,501
Likes
1,932
Rating
4.85
P
Printablesfifindr

Beverage Can Opener with Cover

A smart can opener that also works as a protective cover! Use 3 walls, 5 bottom layers + 6 top layers, 0.15 mm layer, 25% infill, no supports required. ✅ Opens drink cans easily – no more broken nails or sore fingers ✅ Doubles as a cover…

Downloads
8,828
Likes
1,376
Rating
4.94
P
PrintablesTom Horsley

Soda Can Opener

With way too much time on my hands, I decided to render my version of this handy gadget for opening soda cans from scratch in OpenSCAD. I picked a lot of dimensions off the original and this version seems to work well. More pictures and…

Downloads
8,170
Likes
715
Rating
4.88

Soda can opener - with option to use as lid

Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over. How to use it: Open soda can Insert the soda can tap into hole in front Pull up to open the soda can Push it down to lock it on…

Downloads
7,356
Likes
900
Rating
4.9
P
PrintablesVC Design

Box Opener - Spinner

TIP! Use lube in the bearing for optimal spinning :)

Downloads
6,431
Likes
1,274
Rating
4.7
P
Printablesmh_3DSolutions

Ergonomic Box Opener for Cardboard Packages | 3D Printable Utility Tool

A compact and ergonomic 3D printable box opener designed for safely cutting cardboard boxes and shipping packages without damaging the contents. This 3D printable box opener is designed for everyday use in workshops, warehouses, offices,…

Downloads
5,982
Likes
988
Rating
4.76
P
PrintablesPrusa Research

PRUSA BOTTLE OPENER

As an example what is possible to print with our Colorprint we designed Prusa Bottle Opener :D. The print is supposed to take approx. 30 minutes and the printer will ask for filament change with beeping after 25 minutes. Don’t forget to…

Downloads
5,934
Likes
351
Rating
4.83
P
PrintablesC4Consultant

Rocket Tab – Soda Can Opener + Bug Cover - 12oz Can

Meet Rocket Tab, a fun and functional soda can opener and lid that keeps bugs and bees out of your drink while you're outdoors — and seals things up if you're saving that fizz for later. The "PULL" tab design makes opening cans easier…

Downloads
5,224
Likes
807
Rating
4.75
P
PrintablesVC Design

Soda Can Opener & Lid

The tool serves two functions : Can opener – provides extra leverage for easily lifting the can tab Can lid – covers the opening of the can to help keep dust, insects, and debris out between sips The design has been tested on multiple can…

Downloads
4,531
Likes
827
Rating
4.73
P
Printablesss3dprintingBE

Bottle Opener and Cap GUN!

Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the fun Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the…

Downloads
4,237
Likes
1,128
Rating
4.43
P
PrintablesJoey

Bottle Opener / Flaschenöffner in 17 minutes

Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!

Downloads
3,736
Likes
334
Rating
4.68
P
Printablesmh_3DSolutions

Compact Box Opener | Safe 3D Printable Package & Carton Cutter

A compact and practical 3D printable box opener designed for safely opening cardboard boxes, parcels, and packaging materials. This compact box opener is a practical everyday tool designed for quickly and safely opening cardboard boxes…

Downloads
3,669
Likes
781
Rating
4.86
P
PrintablesVinors3DLab

Nail‑Saver Can Tab Opener — Compact Everyday Tool

The Nail‑Saver Can Tab Opener is a compact and clever accessory designed to lift can tabs effortlessly—without hurting your fingers or risking broken nails. Its angled geometry slides easily under the tab, while the body provides the…

Downloads
3,315
Likes
562
Rating
4.87

Bottle Opener

The bottle opener assists people with arthritis, limited finger dexterity or other disabilities to open standard water bottle caps (⌀ 30 mm or 1.18 in). The device provides a large gripping surface and clamps onto the caps of standard…

Downloads
3,290
Likes
556
Rating
4.93
P
PrintablesBamBam Design

Allround Bottle Opener for Screw & Crown Caps

Bottle Opener for Screw & Crown Caps. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…

Downloads
3,157
Likes
647
Rating
4.92
P
PrintablesBeo666

PET Flaschenöffner Bottle Opener | Gicht Rheuma V2

Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…

Downloads
3,077
Likes
579
Rating
4.97
P
Printablesfifindr

Universal Bottle Cap Opener

I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…

Downloads
2,926
Likes
581
Rating
4.96
P
PrintablesStefan T.

Bottlecap - Tinopener / Flaschendeckel

Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…

Downloads
2,733
Likes
766
Rating
4.83
P
PrintablesPrusament

Prusament Spool Opener

Opening the new Prusament spool with the locking mechanism may require a stronger force. We suggest using this simple tool to make unlocking the spool easier. Update: March 17, 2026 : We’re excited to introduce the new PROFI version of…

Downloads
2,684
Likes
276
Rating
3.99

Patrick Star (SpongeBob) Bottle opener

I remixed this awesome model of Patrick Star to turn it into a bottle opener using a €0,05 coin! Other coins might fit as well! Print the model Glue a 5c coin inside Get a beer and enjoy! Category: Kitchen & Dining

Downloads
2,643
Likes
228
Rating
5
P
PrintablesQuantumLayers

Gun Can Opener

Can Opener “Pistol Style” — Trigger-Activated Pull Tab Opener Short Description 3D printed tool designed to open can tabs easily. Just hook the tab into the slot, point the arrow toward the lid, and press the trigger-like tab underneath —…

Downloads
2,275
Likes
203
Rating
4.2
P
Printables3DPrintNovesia

360° Bottle Opener

Change log: New version Added (BottleCap Design) 360°ɹǝuǝdo ǝlʇʇoq allows you to open your bottle in360 different directions! Printsettings: Nozzle: 0.4mm Layer: 0.2-0.3mm Infill: 25-35% Perimeters: 3 Bottom/Top layers: 3/3 Seethrough…

Downloads
2,254
Likes
382
Rating
4.79
P
PrintablesBrazdaPrints

Bottle opener

Bottle opener

Downloads
2,155
Likes
197
Rating
4.91
P
Printables365Prints

Bottle Opener

Mr. 4volt on Thingiverse spent a lot of time designing a fantastic bottle opener to be 3d printed. I took some measurements of his design and made my own. Mr. 4volt deserves credit for this awesome, effective design. This object should be…

Downloads
2,106
Likes
218
Rating
4.96
P
Printablesnetwalk

PET Flaschenöffner (PCO 28), adaptiv, bottle opener

Ein kleiner Helfer, um widerspenstige PET-Flaschen leicht öffnen zu können. Kompatibel zum verbreiteten PCO 28 Standard (Wasser, Cola, Limonade, Säfte). Die Verschlussaufnahme verläuft leicht konisch, so dass auch leicht abweichende…

Downloads
2,035
Likes
155
Rating
5
P
PrintablesNathan

Jar Opener

This Jar Opener helps give better leverage when trying to twist off jar lids. Works on Jars with a maximum lid diameter of approx. 65mm Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2 Infill: 5%…

Downloads
1,999
Likes
160
Rating
4.81
P
Printablesfifindr

Bottle Cap Opener

PRINT PROFILES - I have added new print profiles with different diameters for larger and smaller caps. I recommend printing the M size first and then deciding which size is ideal for you. XXXS - 28,6 mm diameter XXS - 28,8 mm diameter XS…

Downloads
1,944
Likes
554
Rating
5
P
Printablesbobby

Water Bottle Opener

This is a remix/remake of the bottle opener from McMikel on thingiverse. https://www.thingiverse.com/thing:1843611 . I redesigned it with chamfers instead of fillets and rounded the outside so that it can be printed without the use of any…

Downloads
1,793
Likes
159
Rating
5
P
PrintablesBeo666

PET Flaschenöffner Bottle Opener | Gicht Rheuma

Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…

Downloads
1,774
Likes
404
Rating
4.88
P
PrintablescoffeeFueledDiy

One handed bottle cap opener

This is a more elaborate bottle opener (using the same basic profile from my OpenScad Bottle Openers here ) which aims to be used with only one hand. Tip: Use your thumb to keep the opener in place. There are two similar designs:…

Downloads
1,774
Likes
521
Rating
4.76
P
PrintablesObe_Design

Robust Multi-Size Bottle Cap Opener

This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…

Downloads
1,732
Likes
380
Rating
4.82
P
PrintablesJared

The Better Pistachio Opener and Extractor Tweezers - Updated v1.1

Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…

Downloads
1,701
Likes
230
Rating
4.79
P
Printablesfifindr

Universal Can Opener With Cover

A universal opener designed for cans and pull-tab lids, combining two functions in one compact tool. It helps to easily lift stiff tabs on soda cans and food cans, and when rotated on a beverage can, it also acts as a protective cover.…

Downloads
1,689
Likes
437
Rating
4.64
P
PrintablesT. Beck

Bottle Opener

Simple bottle opener. Use for twist offs or pry top bottles. You can attach to your key change using the small eyelet.

Downloads
1,686
Likes
202
Rating
4.46
P
PrintablesFlorent Kosmala

OpenEDS - Soda can opener / pop opener

OpenEDS - Soda can opener It's the first tool of the OpenEDS collection . OpenEDS is made to create open-source assistive tools to make easier and less painful life for Ehlers-Danlos Syndrome people. Description With EDS, It's hard to…

Downloads
1,679
Likes
279
Rating
4.78
P
Printablesnilson_fx

Mini Key Chain Bottle Opener PLA

Mini Key chain or backup bottle opener that works well with PLA and prints fast. No coin or additional material needed. It is designed so that the teeth of the bottle cap don't bite into the opener material. So you won't have nasty PLA…

Downloads
1,618
Likes
182
Rating
4.96
P
Printablesvoidbubble

Klein bottle bottle opener (Bottle Opener)

Take your binge drinking to the same dimension! This immersion of the Klein bottle in 3D space has a modified bottom which acts as a bottle opener. The cutouts on its surface allow a view of its self-intersection while keeping the model…

Downloads
1,575
Likes
216
Rating
4.83
P
PrintablesHellcatless

Can opener/ keychain

Its very fast and easy to print. I use petg, but it can print any other filaments too. I use 0.05mm layer height.

Downloads
1,565
Likes
126
Rating
4.94
P
PrintablesART TOO

SHOTGUN TOOL - CAN OPENER - (Tested)

The perfect way to open your beer !!! Shotgun + Can-opener

Downloads
1,496
Likes
260
Rating
5
P
Printablesahaque

Dishwasher Door Prop Opener

Dishwasher Door Prop Opener: A 3D-Printed Solution for Moisture-Free Dishes Overview Is your dishwasher retaining moisture long after the wash cycle is complete? Say goodbye to musty smells and hello to sparkling, clean, dry dishes!…

Downloads
1,464
Likes
374
Rating
5

Beer mortar (0.33 bottle opener)

The tube consists of three separate printed parts for easier printing. All tube parts are connected together using M3 bolts . The assembled tube is then attached to the stand with four M3 bolts . 14.06.2026 Update Added spring to lever to…

Downloads
1,428
Likes
499
Rating
4.5
P
Printablesmh_3DSolutions

Compact Box Opener | Safe 3D Printable Carton & Package Cutter

A compact and practical 3D printable box opener designed for safely opening cardboard boxes, parcels, and packaging materials. This compact 3D printable box opener is designed for safely and efficiently opening cardboard boxes and…

Downloads
1,316
Likes
282
Rating
4.81
P
PrintablesTrocheHole

Plastic/PET Bottle Cap Opener

Dual ring for easily opening the cap (only the most common size of approx. 30mm DIA) of a plastic/PET bottle. Sizes Five different sizes of hole for caps are available. (Only one size of hole for fingers, 22mm.) I recommend that you try…

Downloads
1,310
Likes
184
Rating
4.75

Can Opener/Closure

A small can opener that you can also use to close the can that no bees or instects find their way into your nice and cooled beverage. Use custome supports in the blue marked areas. If you like to, check out my other designs too!

Downloads
1,278
Likes
140
Rating
4.5
P
PrintablesRSM22

MX and Kailh Switch Opener

A simple and strong switch opener for your keyboard. -Just place your switch in -push down -and pull the top portion out -you now have an open switch This is very nice to have if you need to lube, clean or film your switches.

Downloads
1,235
Likes
107
Rating
4.84
P
PrintablesJindřich

PET Bottle Opener

Filament: PLA, Perimetry: 3, Resolution: 0,2, Infill: 15%, No support. print with the wider side down

Downloads
1,184
Likes
116
Rating
4.9
P
Printablesmuddymaker

OTF Letter Opener

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker OTF letter opener inspired by David6722. He had an awesome…

Downloads
1,184
Likes
244
Rating
4.95
P
PrintablesChris_1978
Downloads
1,149
Likes
59
Rating
5
P
PrintablesPMW0508

Bottle opener

This model only works with slicers that have honeycomb infill (Prusa Slicer) as long as you want to see the honeycomb pattern. Set the top and the bottom layers to zero and infill to something between 20%-30%. This will make the infill…

Downloads
1,129
Likes
90
Rating
4.63