1,470 models
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
This outlet replaces the existing standard one in your pool I have a 15x42 Intex pool, and it seems that between the threads or the diameter of the outlet cover, the other designs are slightly off for what I have. This design matches the…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
I remixed the power outlet dust cover by grumbel , because I want to swap it more often in and out. I use it in the kitchen near the hot plate, where tomato sauce may be splashed or likewise. :) Therefore the cover is a little bit thicker…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Overview Easily replace or upgrade your old or mismatched wall plates with these precise, 3D-printable combination covers , designed to fit standard electrical boxes. This collection includes 2-gang and 3-gang configurations for toggle…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Printed on a Bambu X carbon, 0,12 layer height, tree support and gyroid filling.
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for one variant
I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…
Print approx. €0.72–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
This outlet cover will protect your plugged in electronics from those meddling kids.
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
The first generation Eufy HomeVac H11 suffers from a major design flaw. the air outlet of the motor blows straight down. When vacuuming on a surface, the dirt is thus blown away faster than the vacuum can suck it in. This simple grommet…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Pretty niche need, but if you have a high-velocity AC outlet and need to diffuse the high-velocity jet of air, this part fits into the outlet cover and redirects the flow to the side. I designed this because I have an AC outlet directly…
Print approx. €7.77–€9.49 excl. taxPreliminary estimate for one variant
The outlet cover is designed by me to babyproof our sockets. It fits the outlets in almost all Europe plus Russia, partly in South America and Asia. There is also a printable key to easily remove the cover. There is one print file for 4…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
A small slide-on shelf for a Simon 10 series power outlet or light switch. Can be used for charging smart watches of phones. Fusion 360 source file attached, so you can tweak it to your needs Print instructions Works fine with PLA, 0.2mm,…
Print approx. €6.00–€7.34 excl. taxPreliminary estimate for one variant
A 3D-printed air conditioning water outlet is a custom-designed component that allows for efficient drainage of condensate from air conditioning units. These outlets can be tailored to fit specific installation requirements, ensuring…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
Klein Tools RT250 GFCI Outlet Tester with LCD Display mount for IKEA SKÅDIS. Supports required for the SKÅDIS pegs.
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
I had an old tv cable box above the crib and so wanted to hang the baby monitor up there and hide all the cables. I used PLA, 100% infill with supports. I wanted it to be as strong as possible to hold the monitor. There is a small (1mm or…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
A collection of cover plates for outlets, light switches, and more for all your household needs! Print face side down without a brim. I wanted to create a set of cover plates that leaned into the subtle differences of 3D printing vs…
Wife wanted to get the toothbrush off the counter top to declutter. Proposed a shelf over the outlet. I saw others replace the entire outlet cover with the 3D print but she didn't want to have a bunch of covers stored away and lose them.…
This is just a tiny little model for the Option Plate Mod of the 🥰 BoxTurtle's rear skirt. It accommodates a CNLINKO LP-12 💪 connector, e.g. to connect both CAN and 24V. Additionally, the design incorporates a dedicated cable outlet for…
Replacement power outlet (EU type) for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original.…
NOTE 2025-04-23: I just uploaded a depth gauge, which will make it very easy to determine the gap between the wall and electrical box faces. This gauge makes selecting the correct spacer thickness quite easy. That model is here: NOTE…
These nozzles feature the usual ½ inch (ISO228) thread that fits on most shower hoses. They create a very pointed and strong water jet that lets you power-wash the outlet of your shower or bath tube. The credit for the idea to print this…
A charming cat-shaped decoration designed to fit neatly next to a light switch or power socket. This cute kitty appears to be playfully reaching toward the switch, adding a warm and whimsical touch to any room. Perfect for modern or cozy…
Protect from electrical hazards Discrete design fits in type B outlets Easy installation and removal **Note**, please keep in mind that there is a possibility of the print breaking off in the outlet. For this reason printing the model on…
Give your bathroom sink a clean and modern look with this practical soap dish for standard soap bars. The raised radial ribs keep the soap above collected water and allow air to circulate underneath, helping the soap dry more quickly…
This is the plugs for 1.25 inch outlet holes on an Intex/Bestway above ground pool. The originals are made of rubber of some kind, so I printed mine in TPU, I think PETG would work as well, but haven't tested that.
Model updated! All parts improved! This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ food container. The filament outlets is optimized for the PC4-M6 fittings and allows the…
This is a simple cover for the Meanwell LRS-350 series of power supplies. It has a mounting hole for an IEC-14 power socket (commonly available from Amazon) and covers the voltage terminals of the power supplies. Print instructions This…
Printed this years ago and is still one of my favorites! Thingiverse user Yelt
You need for one outlet: 2EA M3x4x5 threaded brass inserts 2EA M3x10 Cylinderhead screw 1EA M10 PTFE Tube fitting
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
This fully parametric model can generate outlet covers for US electrical outlets. The model supports from 1 to 10 gangs and the following gang types: Blank Duplex Rocker Switch/GFCI Toggle Switch Keystone Nema L14-30 Coming soon: Phone…
The output is tangential to the coil which allows the filament to unwind much more naturally than with the original output. It is necessary to glue the part with a heat resistant double sided adhesive, this avoids screwing the part and…
This adorable model features Snoopy – the beloved dog from the Peanuts comic strip – lying down, making it a perfect decorative piece to mount on a light switch or electrical outlet. Mounting: The model is designed for easy installation…
This set provides a great way to remove waste poop and chamber emissions from your shiny new Creality K2 printer. The set includes the following models: The main single part “Y” piece which connects to the twin exhaust outlets using a…
I use electrical outlet junction boxes quite often as project cases when dealing with AC. It's easy to find low profile single gang boxes, but not so much triple gang boxes. I whipped this up tonight in SketchUp (yes, people do…
This adorable model features Snoopy – the beloved dog from the Peanuts comic strip – lying down, making it a perfect decorative piece to mount on a light switch or electrical outlet. Mounting: The model is designed for easy installation…
I couldn't find the 90-degree adapter for the Bestway Power Steel pool so I made one. The threads for the connection for the pool seem to be non-standard so I custom-made the threads. The threads are ~109mm in diameter. The 90-degree…
Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…
This helps to make the waterflow a bit stronger and have less water running just along the sides. It should fit tight, so there is no glue needed - and so they are changeable if you want another color
Intex Frame Pool Outlet made some fixes and better bridging to save support 3mf has support marker
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 23 to 22mm which is slightly less than 1" and is suitable for many Makita and similar sanders, and connect to the CAMLOCK end. It may be a slightly loose fit…
This model is designed to be inserted into an electrical outlet to add safety to unused outlets, especially for babies or young children.
🐱 WallArt – Cat – Power Outlet – Light Switch Give your power outlets and light switches a fun new look with this cute cat WallArt! This playful design makes it look like a curious little cat is interacting with your outlet or light…
Wanted to hide the Skylight Calendar power adapter behind the wall mounted calendar instead of running the cord down the outside of the wall. The store-bought box wasn't deep enough and didn't have enough of an angle to fit the adapter…
I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…
Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…
Downward angled exit from a filament container that sits on top of the 3D printer enclosure
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
I drew it from scratch based on the original models. The connection diameter and the size of the internal channel have been changed. I also added a few cosmetic tweaks. The connection is about 27 mm and turns into about 25 mm, so it fits…
An outlet box extender to use after renos... In 20mm and 10mm depth... Print Settings Printer: Ender 6 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3D Printing Canada Value PLA PLA white How I Designed This…
This is a wall outlet cover that has a removable shelf for the HomePod mini. It compactly hides the cable inside and creates a nice, stable shelf for the HomePod while keeping the other outlet free for use!
The original hole for the charger was a little too tight, so I opened it up an additional 1.5mm. Much better fit for me
This adorable model features Snoopy – the beloved dog from the Peanuts comic strip – lying down, making it a perfect decorative piece to mount on a light switch or electrical outlet. Mounting: The model is designed for easy installation…
While there are other similar models out there, I created these from scratch, so I had them for a friend, and they all match (size/shape…). I printed them in black PLA per the request 0.20 layer height 10% grid infill. These can be…
Needed a surface mount electrical outlet box to fit regular 110V outlets and shields into.
Sturdy power outlet cover. You can either print in the provided orientation to avoid overhangs and use fancy top surfaces, or flip it upside down to transfer the bed texture into the model, just be aware of the overhangs.
Electric outlet cover plate Category: Household Supplies
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
A simple mount for IKEA KOPPLA outlet power strips as shown in the pictures. Would perhaps also fit the newer model with non-illuminated switch or other brands. When attaching the power strip, slide it into the mount from the side. I…
This is a fake AC outlet and cover plate (USA style), which might be useful for theater stage designs. Or covering holes in walls. Or for messing with people's heads -- attach with double-sided tape onto phone poles or trees or rocks. On…
This adorable model features Snoopy – the beloved dog from the Peanuts comic strip – lying down, making it a perfect decorative piece to mount on a light switch or electrical outlet. Mounting: The model is designed for easy installation…
This adorable model features Snoopy – the beloved dog from the Peanuts comic strip – lying down, making it a perfect decorative piece to mount on a light switch or electrical outlet. Mounting: The model is designed for easy installation…
You don´t have to pour water out of this soap holder.
This is a nozzle for the Rancilio Silvia water outlet. If the drip tray is not pushed all the way back, water can run onto the base plate and the Silvia will begin to rust. With this nozzle do you fix the problem. The inner diameter is…
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…
A friend needed a NACA duct for his racecar, so I made one. It's a small 1.5in hose opening because it is only needed for helmet airflow, mounted on the side window. I'm very happy with how it came out, so I decided to share. Template…
Our pump has a higher GPH output than what came with the pool and I wanted to make the path a uniform cross-section throughout. Only major change was making the elbow outlet hole round and using a radiused, 90deg bend. Update: Had to…
This cap is designed to fit the Bestway P61322 Pool Outlet Strainer - 32mm. Can be fitted with a rubber O-Ring (80mm OD, 74mm ID, 3mm Width ) Print flat side down. 0.2mm layer height and 20% infill works well. No supports required. Using…
This model is for an electrical box to hold a 120V AC electrical outlet. I've also included a model for an outlet cover that fits flush with the outside of the box. I used this in my router table but it could be used for many other…
ONLY WORKS WITH NEST MINI (HOME MINI 2ND GEN) Home Mini 1st gen plug is too small to stay fit on this print. How to know what model you have: Nest Mini (Model H2C, round connector) has a screw hole mount on back vs Home Mini (Model H0A,…
*Note: Newer version available here This tool is to remove the PTFE tube from the outlet end of the Bambu Lab Filament Buffer or the AMS hub (the device on the back of the printer that joins multiple AMS units, not the device inside the…
This adorable model features Snoopy – the beloved dog from the Peanuts comic strip – lying down, making it a perfect decorative piece to mount on a light switch or electrical outlet. Mounting: The model is designed for easy installation…
Uma simples tomada externa para facilitar a intalação de uma tomada em qualquer lugar que você precise, RECOMENDO na hora que colocar os 2 parafusos, coloque-os com calma na primeira vez para NÃO quebrar a parte interna do furo e NÃO…
Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer with holes for M3 screws
Shallow AC Outlet Box by RebelTaz I have a retractable reel AC extension cord that has a defective outlet strip. I'm replacing it with a standard 15-amp AC wall outlet, but I needed a box for it. Most commercially available boxes are too…
A charming cat-shaped decoration designed to fit neatly next to a light switch or power socket. This cute kitty appears to be playfully reaching toward the switch, adding a warm and whimsical touch to any room. Perfect for modern or cozy…
This reducer connects the outlet of an Intex swimming pool to an ordinary 13 mm garden hose. Just a few drops at the beginning, no further leakage. I printed this one in PLA but I recommend PETG for more strength. No support, 20% infill.
1 gang box cover hosting 1 standard electrical outlet. Printing Face down No supports History 2023-07-19: update to use my Modular Model
Replaces traditional vertical outlet. This is a slight derivative of the work by @Chriswak at https://www.printables.com/model/115385-duplex-outlet-shelf It has fewer holes and a flat top to accommodate larger items.
Pokemon Poke Ball style wall plate for Leviton Decora rocker style light switch or outlet. Similar dimensions as the off-the-shelf wall plate: https://www.homedepot.com/p/Leviton-Decora-1-Gang-Wall-Plate-White-R52-80401-00W/100036991 This…
One 10 inch rack panel with cable outlet 1HE und 1/2 HE
The mounting areas has the same geometry as the OEM 3" outlet, but this will fit a 4 inch dryer hose. Reuse the same hardware that came with your P2. Just remove the 4 screws that hole the 3" unit in place. Then install this 4" outlet.…
Outlet shelf remixed for a single gang GFCI outlet. Update: Moved supports to fix overhang issue. Update 2: Added supports to screw holes, changed design of hooks to hopefully make them stronger and a bit better to print. Category: Bathroom
Simple mount for the Amazon Echo Pop Print as modeled - face up
Water Outlet for 17mm Tubes (Connector is tapered for easier fit)
Large outlet shelf for Duplex outlet. Could hold a phone, digital assistant, or other gadget.
120v shallow outlet box, print with supports.
Template / guide for power outlet with 68mm hole
2 gang cover plate hosting 2 standard electrical outlets Printing Face down No supports History 2023-07-19: Update to use my Modular model
UPDATE: added 12mm version. 2 gang outlet extender 6mm ~(1/4") for extending outlet box when adding tile backsplash or other wall resurfacing. I printed with PLA at .25mm layer height on Prusa Mini.
We have a pedestal sink in one bathroom with no counter space. I designed this outlet cover with shelf to put small items while using the sink. This one is in PETG, but I've also printed one in PLA without issues.
I wasn't happy with the other outlet cover designs available, so ended up designing one myself. The latching mechanism should be flexible enough without snapping, and on my Maverick, it produces a tight fit (after a dozen iterations).…
