The source marked this model as adult content.
- Downloads
- 1,222
- Likes
- 255
- Rating
- 5
Counting matching models…
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
Phone Stand for Huawei P20pro, landscape orientation, 50deg angle. Speaker is not covered, and access USB port is given. Perfect to watch Videos, YouTube, etc. while traveling. If you are looking for a portait version, check this out:…
Phone Stand for Huawei P20pro, portrait orientation, 60deg angle. If you are looking for a landscape version, check this out: https://www.printables.com/model/175040-landscape-phone-stand-for-huawei-p20pro
I assembled the RP2040 ( SKU 1030018) with the additional header pins - this remix is to allow fitment of the board with extended headers. My application is more likely to get wet, so I opted to close off the light pipes. Recommended…
Clips inside drawer to hold one or three Sig Sauer SP2022 magazines. This is designed for a drawer side-wall of 12 mm. STEP file included, feel free to modify or remix. Could be pretty simply modified within slicer as well. Recommend…
Learn Guide https://learn.adafruit.com/lightsaber-rp2040/ Adafruit RP2040 PropMaker Feather https://www.adafruit.com/product/5768 RG LED Button https://www.adafruit.com/product/3350 Mini Skinny NeoPixel Strip…
This is a super slim case for the Waveshare RP2040 Zero. Just enough to protect without bulk. Hope you Like it! I wanted to have access to the buttons, USB C, and Neopixel but still protect it when I toss it in my work bag with other…
raspberry pi rp2040-zero module 20231024 07.stl 8mm PCB
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
This a two piece 3D printable case for the Raspberry Pi RP2040 based 1.28-inch watch available for $35.50 from Tindie here and also available from AliExpress here . For best results print using a SLA (Stereolithography) resin based…
Small press fit case for the Waveshare RP2040 One version of the Raspberry Pi 2040, it also fits the RP2350 One version which is identical in dimensions. Since I mainly use it for PicoKeys so I don't solder to them, I use them as a USB…
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
INGCO P20 BATTERY SERIES WALL HOLDER.
APEX LEGENDS P2020 This is a high detail prop model-kit for 3d-printing. This model-kit contains 19 individual parts to ensure as much detail as possible. All parts have orientation indexes for easy assembly. The parts need to be glued;…
Hey, checkout the (much improved) v2 of this model here: https://www.printables.com/model/497020-picoprobe-rp2040-zero-case-v2
Slim Phone Cover for Huawei P20 Pro
Huawei P20 Pro Case with Gyroid Mesh backside. Prusaslicer project with Huawei P20 Pro plain case, layer modifier printing just infill mesh for backside. I printed mine with PETG and 0.6mm nozzle. If using 0.4mm nozzle mesh can be mad…
A dedicated case for the smallest usable RP2040 board I could find. It has labels for pins used by Picoprobe and a separate hole for each cable to prevent tangling. It screws together with (up to) 4 M3 14mm screws (and nuts). The project…
Description This is a scale model of the Seeed Studio XIAO RP2040, a board powered by the Raspberry Pi RP2040 chip with various useful functionality and costs $5.40. The product page for this device can be found here . It is intended for…
Resonance probe for input shaper calibration for the Klipper firmware based on a RP2040 Zero and a generic ADXL 345 Sensor SPI breakout board.. Wiring: RP2040 ADXL 345 GPIO 0 SDO GPIO 1 CS GPIO 2 SCL GPIO 3 SDA GND GND 3.3V VCC…
Design inspired by original Tailfin light mount and using the same 2 screws to mount. So you may reference the original installation manual. Reinforced the structure and straightened the mount for extra durability. Adding the second mount…
Pretty useless but fun project ;-) Fits a ESP32-S3-Zero / RP2040-Zero and a 0.96" OLED. The MCU is fastened with hot glue, the bezel and foot using CA glue or similar. The new version also fits a piezo buzzer soldered to the MCU. UPDATE…
I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e
I created this design for the INGCO P20S Lithium battery charger 2.0A (FCLI2001/FCL12001E). The charger needs to be screwed in the base before mounting in the wall. You need to unscrew 4x M10 Torx tapping screw from the bottom of the…
Hello there, this is an dual hose adapter for the Beko BP209H portable air conditioner. It fits perfect with some duck tape or silicone. Printed with some big printer e. g. Anycubic Chiron. Print Settings Printer Brand: Anycubic Printer:…
Love the original (a very simple case for the RP2040-Zero) and just wanted a small change.
Designed and printed this case for the Huawei P20 Lite. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.1mm Infill: 10% Category: Mobile Phone
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. Cute and…
RP2040 + cc1101 in one chassis. The device is working with cc1101-tool firmware from github my fork: https://github.com/McGr3g0r/cc1101-tool my new tool: https://github.com/McGr3g0r/cc1101-wizzard most recent FW+apk:…
A 3D-printable housing for the MyScale KP20488 bluetooth scale (~15 EUR on AliExpress). Designed to fit on the Gaggia Classic drip tray while maintaining bluetooth connectivity for Gaggiuino and Gaggimate integration. The model transfers…
I needed a heelplate for my Simagic P2000 pedals, so I designed and printed one. It can be printed in 2 parts (even on a Prusa Mini). You'll need 7pcs of countersunk M6 bolts: M6 x 20-24mm bolts - 4pcs for the 4 corners to fix the plate…
Should also work with a P30 Pro. This design is for the preinstalled Volkswagen Passat B7 phone socket. For a easy printability I have created three parts. This design allows the usage of the fingerprint sensor and also allows plugging in…
If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
3D print an enclosure for the Feather RP2040 that snap fits together! No screws needed. The case features openings for the USB and STEMMA QT ports. The cover features built-in actuators for pressing the on-board boot and reset buttons.…
You'll need a larger 3D printer to print the heel stop in one piece
Make a DIY YubiKey for only $4. With this configuration, you can use the Picokey with both your PC and your phone. https://www.picokeys.com/pico-fido/ https://pt.aliexpress.com/item/1005008622261552.html…
To print the model, use supports, 20-30% infill works best, use support blocker near the lip where the hole is, the overhang is small enough to be printed successfully by most printers.
Used to cover unused cable accessways in the case for a cleaner look
Build the sword that seals the darkness and defend your kingdom with Adafruit's RP2040 Prop-Maker Feather! Learn Guide https://learn.adafruit.com/master-sword-rp2040 Adafruit RP2040 PropMaker Feather https://www.adafruit.com/product/5768…
Voron 2.4 Stealthburner cable door with fan for btt ebb rp2040 canbus to cooldown the driver and rp2040
Remix of the adapted heel stop founded here https://www.printables.com/fr/model/679441-simracing-pedal-heel-stop It's a reproduction of the aluminium heel stop from Simagic but the height makes your feet taking a second point of rotation…
Ihr benötigt: 2x bzw. 4x M6x15mm -20mm Schrauben und Muttern 1x M4x20mm und Mutter 2x M8 Schrauben + Nutensteine für die Montage am Rig
It reuses 4 of the m3 screws on the standoffs. They screw directly in the hole in the bottom of the box. Doesn't need supports if your printer is good with bridges. Maybe little supports for the conterbored holes on the cover. Need 2x…
This case for the Adafruit MacroPad is a snap fit enclosure and requires no additional hardware. Layer height 0.2 Should be sliced with “Detect Thin Walls” so the tips of the snap tabs do not make gaps in the side walls. If you are using…
This is a remix of the Arduino Nano 33 BLE sense box by cjake: https://www.thingiverse.com/thing:4801467 This should fit any of the newer Arduino Nano models that use microUSB. V0 & V1:…
This is a case for Adafruit's Feather RP2040 USB Host board. https://www.adafruit.com/product/5723 It uses M2x4 screws for attaching the board to the case and M2x8 flat head screws for keeping the top and bottom of the case together.
light mount with 25.4mm diameter. You can use the existing screws.
3d model and stl for mounting the waveshare RP2040-LCD-1.28 in the MSA Millennium voice amplifier port. Has a separate compartment for a battery. Uses 3 M2 heatset inserts and M2x12 countersunk screws to assemble. Use an o-ring to get a…
This is a remix of the Arduino Nano 33 BLE sense box by cjake. This should fit any of the newer Arduino Nano models that use microUSB. V0: Same as the original, except I separated the two parts into individual STL files. V1: Added tiny…
A frame to mount the ZuluSCSI Compact RP2040 (Homebrew kit) in a 3.5" floppy drive (fdd) bay. I'm not sure, what kind of fdd bay it is, I think it's IBM/PC. Please measure to hole distances for the screws to verify before printing: the…
Update 05.01.2024 I have uploaded the Fusion 360 file including the original hilt and custom emitter and pommel. I wanted a more “classic” emitter for the lightsaber and was inspired by a few images I found online. I plan to use the prop…
Requires 2x M6 socket head cap screws to fasten to the 4040 extrusion. Does not require any additional hardware to secure the P2000 controller, it simply snaps into place as shown in the gif. Orient the part on the build plate so it…
The lovely Asus Prime AP201 computer case was slightly too tall for the shelf it lives on, so I printed these slightly shorter feet. They reduce the foot height by 14.5mm, can re-use the same screws and non-slip pads, and allow a bit more…
I received my Asus Prime AP201 MATX case today, only to find one of the case feet was broken in shipping. Rather than waiting for it to be shipped back, and a replacement case be shipped back out, I decided to make an exact replica of the…
3D Print a snap fit case for the Feather RP2040 Scorpio! This features mounting tabs and port openings for USB, battery, headers and more! Customize the design to make it fit your next LED project. Learn Guide…
Another spin for Simagic P2000 heel stop. Cut it in slicer in to two pieces to fit in one print job. Takes about 8h to print on Prusa core.
BOM: 3x M3 Tool head: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead Board: https://github.com/bigtreetech/EBB/tree/master
This remix is for common 3 hole cable chain whit heat set insert.
Its a model wiznet W5500-EVB-Pico
Here are the parts used to convert the Mobula7 V3 frame to the Mobigital Print these parts in TPU at 0.2mm layer height The spacers have the “cross” portion that joins them together, which makes it easier to get higher quality and sturdy…
Housing for RP2040 Zero combined with an USB A connector. USB C cable goes into PC, keyboard (dongle) goes into USB A connector. More info here: https://github.com/jfedor2/hid-remapper
I teach a summer Star Wars class that culminates in every student building their own lightsaber. I didn't want every student making the same exact lightsaber, so I started deriving the original 3d models into mix-and-match alternatives,…
A coworker had a pencil holder he designed like this on his desk at work. My son mentioned he wanted something similar, so I made my own version. It is an easy 3d print with a color change at layer 1.2mm and back at layer 3.2mm. Then glue…
Made this Accelerator pedal for P2000 kit. It might work with other simagic products, but I don't know. **UPDATE 4/4/2025 Integrated M6 threads into the pedal and minor fitting tweaks. Created matching brake or clutch pedals. Easy to…
I needed a small case to play with new RP2040 designs. This housing allows access to the optional JST XH connectors and protects the interfaces from accidental contact. A double case allows debugging with a 2nd pico. Print with PETG in…
Modification of the original model by jos in Thingiverse to solve a design error in the turn signal side cover. Now it fits perfectly and is 100% functional. I recommend printing with the face up for a better finish.
Ich habe mal ein Adapter für die Simagic Shaker modelliert. Leider habe ich keine bei mir. Deshalb hoffe ich, dass der Flansch passt. Allgemein ist das Bauteil ziemlich straff in der Öffnung vom Pedal. Das muss so! Gebraucht werden 2x M5…
My girlfriend requested a fidget toy. I designed a 4-switch mechanical macropad she loves and carries with her everywhere to click. I wasn’t satisfied with just a fidget, so I made room for an RP2040-Zero. It can be used as a pure clicker…
This is for the Adafruit MACROPAD RP2040. There are 3 items, the stand, the holder, and the rotary encoder cover. All is an easy print. There are no supports needed. Any material can be used. This is my version 3 of stand for the…
The blade holder when printed was loose on my Ultrasaber 24" blade so much there was a gap around the blade and the emitter would not tighten against the blade. I modified the original Blade_Holder STL as well as the Blade_Holder (Short)…
UPDATE v2: Got some other RP2040-Zero that did not stay in place so I updated the model to have screws that secure it. You will need: 3 pcs M3 nut 3 pcs M3x10 screw ---- I use this with pin headers on the RP2040-Zero and female pin…
Made this remix for my Autel OBD2 Bluetooth Scanners -AP200 -AP200M Fast Print no supports need. You have 2 versions ( CutOut or Full ) Files can be found in the files tab, leave a like and a rating , helps a lot!
This thing removes the P2015 error and engine error. I printed this in ABS with 99% Infill. Category: Automotive
example printed in creality petg use m3 screws. body is resistant to overtightening but avoid doing so to preserve part durability if you need help flashing or building firmware comment
Build a DIY footswitch USB controller using CircuitPython and QT Py RP2040. This uses a micro switch, micro-controller and 3D printed snap fit parts. This footswitch can be programmed with CircuitPython to make custom keyboard shortcuts,…
The Waveshare RP2040-Tiny boards and its clones are a pretty good option if you want to mod your Guitar Hero controller with the excellent Santroller firmware, they're fairly easy to work with and they have a separate USB-C daughterboard…
DIY 3D Space Mouse use rp2040-zero original author https://www.thingiverse.com/thing:6102343 remix stl file from https://www.thingiverse.com/thing:6122483 I2C pin SDA P6 CLK P7…
Even if you're using a SFX power supply, the original bracket might be too big and be in the way of the graphics card. This model only uses the necessary space to mount the PSU in your case. 4 M4 nuts and screws are required
Lighting mount for a tailfin cycling rack. Design is fully parametric, so the angle, height and diameter of the cylinder can be customised, just ask. Designed to be printed with a high perimeter wall count and very low infill volume…
This is a stand and rotary cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). This is an easy print with less material so that it's a fast print. On the bottom of…
Stand for using your multieffects Valeton GP200 LT comfortably in your desk with 2 available positions/angle. It is necessary to enable supports in the part "Valeton GP 200LT Support 1". For the rest it is not necessary.
A remix of Paul Phillips' ADXL mount. However, it uses this particular ADXL345 combo unit from Mellow Labs: https://www.aliexpress.com/item/1005005486458306.html Bill Of Materials One Mellow RP2040/ADXL345 module - see AliExpress link…
the screws are: 2 M2.2 or M2.5 x6 for plastic self tapping 4 M2.2 or M2.5 x8 for plastic self tapping nothing special to mount it, just put a dab of hot glue on the RP2040 as this part doesnt have hole to screw it for more info on wiring…
Print in PETG (or a flexible materiale) Made this to fit the Asus Prime AP201 case with the ATX psu fully on top. The devices have 18mm spacing to make room for SATA power cable clearance.
About 15mm longer than the original feet to allow better airflow to any bottom mounted fans when the PC case is placed on carpet. I found even with on a medium pile carpet the bottom dust filter is essentially sealed off. These give…
A lid for the electrical box on the back of a Vespa P200
Seeed Studio XIAO RP2040 is compatible with the Raspberry Pi RP2040 ecosystem as they share the same RP2040 chip. It supports multiple languages including C / MicroPython / CircuitPython. This will be a great tool for you to get started…
This case specifically designed for RP2040 module from WeAct Studio. This is bit snug fit (extra 0.30 mm length and width applied to original datasheet specifications) and before printing make sure that z-seam is aligned properly. Else…
A lid to protect buttons and encoder while carrying the macropad in your backpack or pocket. Follow if you like it
Magazin loading help Hämmerli 280 or Hämmerli SP20 sport pistols Print with PLA or PETG , no supports needed
This is a mounting caddy for the RP2040 Advanced Breakout and Basic Breakout Boards. No need for heat-set inserts on this one, just use some M3 button top bolts around 10mm in length and screw directly into the PLA. The caddy is flat on…
I couldn't find any adapter that works for the break pedal also, so I created my own version. This has cleareance for all pedals including break. You need 4x M4 x 35 screws and 4x M4 nuts. Printed with PLA works fine. Added also the…
Scatt adapter for Hammerli AP20 air pistol. To fix in place of the trigger guard.
I was looking for a good macro pad for video editing. I came across Zack Freedman's youtube and big wheel repo. I couldn't find a teensy in my project budget, so I updated the design to fit a generic/clone of the Pi Pico. I also hollowed…
Same model as before but with a hexagonal pattern cut out to allow for better airflow to the board