Search results: packs

Sort order

Counting matching models…

P
PrintablesSteveW91

Pocket Pipette Tip Packs

I used a M2*8 set nut with an 8mm M2 screw to attach the lid. There is also space to insert 2mm diameter x 1mm deep magnets in the lid to help it stay clipped closed. Print the tip holder required and place in the case. There are holders…

Downloads
250
Likes
54
Rating
5
P
Printablesmkosiedowski

Bicycle rack adapter for backpacks - use any backpack as a pannier

This simple item solves the problem of hanging a backpack on your bicycle rack without using additional straps, panniers, or anything else. Small, lightweight, easy to print and does the job. Perfect if you are picking up your kids from…

Downloads
190
Likes
55
Rating
5
P
Printablesxander1

Deuter Backpacks Belt / Strap Buckle (Male Part)

Male part of a Deuter Backpacks belt / strap buckle. Fits 3cm wide straps, e.g. the waist strap on a Futura 22 backpack. The pictures show how the strap should be routed through the printed part. Prints in 41 minutes at 0.15mm layer…

Downloads
178
Likes
27
Rating
5
P
PrintablesMichael Browne

Fully Parametric Closet Hook for Backpacks (w/ OnShape & Fusion 360 support)

I wanted a way to finally hang up all of my backpacks, but it seemed like every other option out there was designed with specific closet rods and/or backpacks in mind, and either the dimensions were wrong for my purposes and no CAD was…

Downloads
153
Likes
33
Rating
5
P
Printablesironsights

Double Hanger For Backpacks

The misses was always leaving her bags around the place and on the floor so this hanger has significantly helped clean up and organize everything. Have even used it for a heavy winter coat too. I've has the best success printing it on its…

Downloads
146
Likes
71
Rating
5
P
PrintablesQuint

Seed Packs Container (90mm width)

This container has 15 slots for storing 90mm wide seed packs. The packs are easy to remove and place. You can find the blend file in the files if you want to adjust the width. Printing Difficulty: I I : Novice printing knowledge Basic…

Downloads
125
Likes
55
Rating
5
P
PrintablesEcoDad

Replacement Male Clip for Patagonia Backpacks

I lost one of the clips for the sternum straps for my Patagonia backpack that I use everyday. I created the adjustable, detachable sliding clip and then created this 3d printable clip that works with the female clips on the backpack. The…

Downloads
46
Likes
10
Rating
0
P
PrintablesMarco Garavello

Support for backpacks

PLA plastic support for backpacks. 5 mm thick, capable of holding two empty backpacks to save space and keep them within reach. Two 5 mm diameter holes for mounting. Simple and quick to print. The support is also designed to hold a…

Downloads
22
Likes
10
Rating
0
P
Printablespavel

Sternum strap buckle clip for Lowepro ProTactic backpacks

Chest Strap Buckle Clip for Lowepro ProTactic Backpacks This is a small clip designed for Lowepro ProTactic backpacks that secures the sternum strap when it’s not in use. Instead of dangling loosely, the strap clips neatly into this…

Downloads
10
Likes
0
Rating
0
P
PrintablesAndras Farkas

18650 Cell Holders for DIY Battery Packs – Lightweight, Durable, and Easy to Print

Summary: The 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…

Downloads
5,172
Likes
2,243
Rating
4.83
P
PrintablesSartor

Batteries holder for 18650 or 21700 lion packs (6S, 4S, 2S)

Better to print from temperature resistant filament (ABS, PETg) and without supports

Downloads
1,313
Likes
114
Rating
5
P
PrintablesStranula

K2 Plus - CFS Riser - Side Panel Packs

You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the side and back panels for the CFS riser. You will need to print 3x Left…

Downloads
1,295
Likes
120
Rating
5
P
Printablesjakefrommars64

(UPDATED 30-JAN-2024) Printable Label Expansion Packs for Gridfinity Bins by Pred

I NEED YOUR HELP I want to include labels for anything and everything a maker would require! If you have a suggestion for a set of labels, leave a comment or message me, I try to read them every day. Thank you ^^ These labels are just a…

Downloads
1,156
Likes
292
Rating
4.93
P
Printablesarscreo

[gridfinity] Kitchen Packet/Baking Powder/Kitchen Powder Organizer (65mm up to 78mm wide powder packs)

Gridfinity compatible Kitchen Powder Pack Organizer with variants for standard 65mm or up to 78mm wide powder packs , with layouts for 2x2x1.2 and 2x3x1.2 gridfinity units . Additionally there are variants with a slot for easy gripping ("…

Downloads
1,096
Likes
425
Rating
5
P
Printablesz4cfry

18650 Cell Holders for DIY Battery Packs – With Battery Stop and Connector Version, Lightweight, Easy to Print

The updated 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. This improved design includes an added battery stop for enhanced stability and a version with integrated connectors for…

Downloads
688
Likes
119
Rating
5
P
Printablesngynkvn

AA/AAA Battery Packs

Simple Battery Packs! – AA/AAA This is a simple, fast-to-print battery pack that uses 22 gauge solid core wire and aluminum foil intended for powering breadboards or small electronics. Once the wires are fastened the material will flex…

Downloads
625
Likes
148
Rating
4.88
P
PrintablesAndras Farkas

21700 Cell Holders for DIY Battery Packs – Lightweight, Durable, and Easy to Print

Summary: The 21700 cell holder is a 3D-printable component designed for securely holding 21700 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…

Downloads
553
Likes
103
Rating
5
P
PrintablesMistertech

AA and AAA Battery Holders (2, 4, 8, 12, 16 packs)

Here is a set of AA and AAA battery holders. No support needed. These holders have retention so your batteries will not slide out. Handy if you want to toss a pack in a bag and go. It took 2 hours for me to print the 4AA pack at 0.3MM…

Downloads
534
Likes
66
Rating
4.83
P
PrintablesChriswak

Washer Packs

Description from author's original post: These printable washer packs are perfect for your toolbox. Keep all your washers together until you are ready to use them .2 sizes have been uploaded here. You can tinker with the model at…

Downloads
465
Likes
51
Rating
4
P
Printablesmagnetoprint

The Bladder Buddy: Ultimate Drying Solution for Hydration packs (parametric)

Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…

Downloads
441
Likes
102
Rating
3
P
Printablesfuspy

BetaFPV Air65 Battery Holder for Bigger Packs (450mah/550mah)

A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!

Downloads
426
Likes
36
Rating
5
P
PrintablesWeirdCan

Side Lid (casing) for 4S and 6S 18650 Li-ion Packs

Infos These are side lids for Li-Ion Packs, based on 18650 cells. One version is for 4S packs, one for 6S. This design consists of several parts. A back part which is closed A front part which is opend for the battery wires A front lid…

Downloads
339
Likes
44
Rating
5
P
PrintablesDiem

Battery Power Packs

A range of AAA, AA, C & D single and multi-cell power packs using bent drawing pins (thumb tacks) as contacts and incorporating 3D printed springs. Whilst they may be printed in any plastic they work best in PETG and nylon, the filament…

Downloads
303
Likes
58
Rating
4.33
P
Printablescudak01

Male buckle/clip for attaching daypacks to Osprey Farpoint

This buckle can be used to attach any daypack to the front of the Osprey Farpoint 40 (by sewing additional straps onto the daypack), as only the Farpoint daypack is natively compatible with it. Many thanks to @herpderp_1457885 for the…

Downloads
297
Likes
17
Rating
0

Rotated S-Hook Hanger for Backpacks – Closet Rod Optimized

I designed this rotated S-shaped hook to hang my backpack flat against a closet rod or bar. Unlike a regular S-hook, this one is rotated 90°, so your backpack hangs parallel to coats and clothes – saving space and keeping things tidy.

Downloads
275
Likes
28
Rating
4.5
P
PrintablesmozWORLD

Flavor Packet Caddy for 16.9 oz Water Bottle Flavor Packs

Throw the boxes out, they take up too much space, and organize your drink flavor packets with this drink flavor packet caddy. print with no top or bottom layers to save filament.

Downloads
227
Likes
27
Rating
0
P
PrintablesVinors3DLab

Table Hook for Bags and Backpacks (18–55 mm)

This compact and sturdy table hook is designed to keep your bag, backpack, or headphones off the floor by securely attaching to the edge of your desk. Its geometry is fully optimized for support‑free 3D printing , ensuring excellent…

Downloads
215
Likes
36
Rating
0
P
PrintablesY5HI5LOW5

Y5's Ball & Socket Joints Sample Parts & Mega Packs!

Kit Card Version Is Not Tested And May Not Work Well Print At Your Own Risk!

Downloads
170
Likes
58
Rating
5
P
PrintablesClay_47

Tempo Holder Dispenser 10 Packs

A simple Tempo Dispenser for 10 packs

Downloads
150
Likes
25
Rating
5
P
PrintablesEmil Segerås

GoPro chest mount for use with dual front strap backpacks

Needs GoPro compatible screw and nut. Made specifically for biking, where the camera is mounted upside-down and tilted to compensate for upper body being tilted (pointing forward when body is in riding position). The part holding the…

Downloads
138
Likes
19
Rating
0
P
PrintablesMR3D

Varios portabaterías LP-E6 con pulsadores de liberación. Several LP-E6 battery packs with release buttons

Os presento los portabaterías diferentes, con un novedoso y práctico diseño de botones laterales. Son para una de las baterías más populares de Canon; la LP-E6 N ó H. He diseñado ocho versiones o variaciones para que cada uno imprima el…

Downloads
132
Likes
15
Rating
0
P
PrintablesWilko

Fastener for bags, handbags, backpacks etc. - "secure" version

My sister likes to sew and often bags. Once she saw a lock that she and my niece would have liked. She wasn't able to take a picture but she gave me a rough sketch - to be honest two lines each representing one perspective. I detail this…

Downloads
123
Likes
38
Rating
0
P
Printableststoegi

USB powerbank adapter for Bosch 18V battery packs

Use your Bosch 18V Power4All batter pack as USB power bank adapter for charging up to three devices on the go. IMPORTANT NODES: The 18V lipo battery packs are usually unprotected (with no charging or discharging circuit on board). Take…

Downloads
99
Likes
27
Rating
0
P
PrintablesStephen Melton

Funny bathroom sign for backpacks, camping

this can be used as a key chain or a full on bathroom sign

Downloads
98
Likes
21
Rating
0

Mini Air Conditioner / Cooler for Ice Packs (120mm Fan)

IMPROVED VERSION: more adjusting possibilities and better stability because of 2 additional rear feets. and a bigger drip tray This project was born out of necessity on a hot summer day at my desk. I wanted a simple and effective way to…

Downloads
97
Likes
15
Rating
5
P
PrintablesElocius

Battery extender and holder for larger LiPo packs. Rlaarlo Omni Terminator

This is a simple battery extender and holder for the Rlaarlo Omni Terminator. It lets you run larger and longer LiPo batteries that do not fit the stock tray. The part moves the battery position slightly forward and gives a solid vertical…

Downloads
93
Likes
8
Rating
0
P
PrintablesPhillip Klohr

Drop on plaque names for Battletech Force Packs.

2/19/2025 - I added Grey Death Legion Heavy Battle Lance. 12/30/2024 - I added 2 new force packs. Clan Fire Star, and 1st Somerset Strikers. These are small plaques to drop on the underside of the miniatures with the name on it. I have…

Downloads
90
Likes
10
Rating
0
P
PrintablesDIY500AMP.COM

2S1P Battery Holder for RC Receiver Packs – 18650 Cells

This is a custom-designed 2S1P battery tray for 18650 lithium-ion cells, commonly used in RC receiver and servo setups for airplanes and similar models.

Downloads
90
Likes
11
Rating
5
P
PrintablesFriedlander326

Lego Machine Gun Jetpacks

I wanted jetpacks for lego figures, and then came up with a way to make it even more awesome (may have been subconsciously influenced by jetpack joyride). The big figure is the same model scaled up to 19 mm for the neck hole, or whatever…

Downloads
85
Likes
8
Rating
0
P
PrintablesWilko

Fastener for bags, handbags, backpacks etc. - "easy" version

My sister likes to sew and often bags. Once she saw a lock that she and my niece would have liked. She wasn't able to take a picture but she gave me a rough sketch - to be honest two lines each representing one perspective. I detail this…

Downloads
84
Likes
21
Rating
0
P
PrintablesEA2W

Spiderbeam mast holder for backpacks

Mast Holder for backpacks. Designed to carry a Spiderbeam 7m fiberglass mast (Inner diameter 55mm).

Downloads
84
Likes
19
Rating
5
P
PrintablesLAB3D

Appendino da scrivania per borse o zaini / Desk hanger for bags or backpacks

Materiale utilizzato PLA ma consiglio il PETG per maggior resistenza e minor flessione se volete esagerare per ridurre al massimo la flessione e la possibilità che si rompa ABS o Nylon. Layer 0.2 Supporti da abilitare Misure dell'incastro…

Downloads
83
Likes
12
Rating
0
P
PrintablesSimplySolid3D

Ultra Portable Table Hook for Backpacks & Handbags

Keep your bag clean and off the floor with this minimalist, high-strength 3D-printed table hook. Whether you are at the office, a coffee shop, or working from your own desk, this hook is the perfect compact companion for your gear. Key…

Downloads
81
Likes
11
Rating
0
P
PrintablesHuabaman

schraubbare Rucksackschnalle / screwable Buckle for Backpacks

Schraubbare Rucksackschnalle für flexible Gurtbefestigung Diese Rucksackschnalle bietet eine unkomplizierte und elegante Lösung zur Befestigung von Gurten an Rucksäcken, Taschen und ähnlichen Anwendungen. Sie zeichnet sich durch…

Downloads
79
Likes
10
Rating
5
P
PrintablesEmatyk

Box for two packs of Poker cards

This is a classic rugged box resized to fit poker-sized dimensions for two decks of cards. I added built-in inserts to keep the decks separated. I’ve used it for Exploding Kittens, and it worked perfectly.

Downloads
71
Likes
19
Rating
0
P
PrintablesJan Recom

Single Hook for clothes and backpacks

I have designed a hook that I can use to hang heavy clothes and rucksacks on my heavy-duty shelves. The hole is for M4 screws with washers (9mm diameter). Printed with PETG, 25% infill and 6 wall lines and 6 bottom and top layers. The…

Downloads
70
Likes
7
Rating
0
P
PrintablesDrod2030

Vision Pro Battery packs

**Updated with more stable design Hey All. New to CAD decided to make some battery pack options for the Vision Pro. minipack- just a belt clip for the normal Vision Pro battery pack MegaPack - a larger version that can hold most newer…

Downloads
69
Likes
13
Rating
0
P
Printablesskodak

inReach Mini 1 holder for Kriega backpacks

I needed something sturdy to keep the inReach Mini 1 on myself while riding my motorbikes off-road. I have two Kriega trail backpacks, so I decided to print a holder that will be using zip-ties to attach inReach to my backpacks. You will…

Downloads
69
Likes
4
Rating
0
P
Printableshellobutbye

Ventilated Desiccant Holder for Silica Gel Packs

# Reusable Bayonet-Lock Desiccant Holder A compact ventilated desiccant holder designed for standard silica gel packs. This holder uses a secure bayonet twist-lock lid and a high-airflow hex pattern to maximize moisture absorption while…

Downloads
66
Likes
43
Rating
0
P
Printablessubieguy2

Trident Gum Pack Holder (9 Packs & 18 Packs)

We chew a lot of gum in this house… We all have anxiety. Chewing gum was something we found during some physical therapy that has helped us all. It also prevents some other nervous habits like biting fingernails. Soo…. we keep a lot on…

Downloads
65
Likes
2
Rating
5
P
PrintablesFirepigeon

Warfighter Ammo Crate 2nd floor & Battle Packs storage

Storage components to use a 2nd floor inside the Warfighter Shadow War Army Crate and individual Battle Packs for sleeved cards. If you do not own a 3D Printer you may order it on https://3dprintforgames.etsy.com/

Downloads
62
Likes
8
Rating
0
P
PrintablesKugelfeuer

Cat Pendant kids don't mix up their backpacks

Deutsch: Ein katzenanhänger für Schlüsselbund, Rucksäcke, Halsketten und vieles mehr. Damit die Kids die Rucksäcke oder Jacken usw. nicht vertauschen. English: A cat pendant for key chains, back packs, necklaces and much more. So that the…

Downloads
62
Likes
12
Rating
0
P
PrintablesAndrew

Pill blister packs holder

My wife asked for some simple solution to keep blister packs organized. After talking to her about what would be a good one, I made a small square-ish holder. Added some soft rubber sticky film to stop it from sliding all over the place.…

Downloads
58
Likes
8
Rating
0
P
PrintablesPrintxss

NFC KEYCHAIN for backpacks and keys

I’ve designed this special keychain, which contains an NFC chip inside. I’ve stored my phone number on it in case I lose my keys or backpack, but you can store anything you want—📱 social media profiles, 🌐 a website, ✉ email address, and…

Downloads
56
Likes
14
Rating
5
P
PrintablesAgonyEcho

First Aid Tag For Backpacks

Base, plus sign and border are all different levels to make multi-color printing easier. Four circular mounting points 10mm across for tying to MOLLE webbing with carabiners or cordage

Downloads
53
Likes
11
Rating
0
P
PrintablesMotorKurti

Zip Tie Holder for MOLLE Backpacks

This model was designed to mount zip ties to a backpack with MOLLE system. The belt width of the backpack is 25 mm. This model is splitted into two parts: Stopper: Holds the head of the zip tie in position so it can not slip out Holder:…

Downloads
51
Likes
15
Rating
0
P
PrintablesNumb3rEleven

Box to storage the printable Faction packs from Age of Sigmar Tabletop Game

Trunk and Lid for the chaos and the death faction packs for AOS4

Downloads
48
Likes
10
Rating
0
P
PrintablesVOLTFur

DJI Mini 2 Battery pack stand (6 packs)

How to store your flight battery packs? This is a clean solution for storing and even for display your battery packs. Printed with 15% Infill, no supports

Downloads
46
Likes
12
Rating
0
P
PrintablesIbex

WAGO Universal Clip (for bags/backpacks/MOLLE)

Idea Enhance the functionality of your backpack, vests, bags, and more with this versatile WAGO clip, designed for everyday use. Compatible with standard WAGO connector clamps (221-413), these connectors can be easily pushed into place…

Downloads
44
Likes
23
Rating
0
P
PrintablesLexFran

Gridfinity IQOS holder, charger useable, 2 packs

Gridfinity IQOS holder, charger useable, 2 packs

Downloads
39
Likes
3
Rating
0
P
PrintablesYoloAch

Haken für Rucksackriemen / Hooks for Backpacks

Heken um Dinge an Riemen von Rucksäcken zu befestigen. Hook to attach things to a backpack Außmaße: Loch / Hole: 24mm x 4mm Grundplatte/ base plade: 32mm x 32mm Support wird für den Überhang benötigt Support is needed for the overhang…

Downloads
39
Likes
13
Rating
0
P
PrintablesFyrby Additive

Wall Mounts & Desk Stands For F1 Authentics Certificate Packs

These are easy to print stands and wall mounts for F1 certificate packs, so you can proudly display them next to your Formula 1 memorabilia to show their authenticity. Also, another wall mount/stand will be provided soon for the very…

Downloads
38
Likes
8
Rating
0
P
PrintablesBennyHuang

PackStand(Stands for iPad or computer)

Introduction: https://makerworld.com/zh/models/580060#profileId-500865 The PackStand is a sleek and portable stand designed to elevate your tablet, laptop, or other devices wherever you go. Engineered with a minimalist aesthetic, it is…

Downloads
38
Likes
2
Rating
0
P
PrintablesMyco Dogs

Display/Organizer for Sterile Swab Packs

Store and organize your swabs.

Downloads
34
Likes
4
Rating
0
P
Printables/dev/tea

Stackable humidity control pack holder for Boveda style packs

This is a stackable humidifier pack holder for Boveda style packs. Can be used for cigars, tea, cannabis, and more. Print with no perimeters, no top or bottom layers. Set the infill to somewhere between 30 and 70% with an infill type like…

Downloads
33
Likes
7
Rating
0
P
PrintablesAaron Randall

1s Whoop Battery Mount (Wider Packs)

Had an issue with my larger 1s packs slipping out of my rubber band I was using. So I whipped this up quick for those who may be having the same issues. She's a little tight. But someone may use it. If I need to change some things, I can.…

Downloads
33
Likes
3
Rating
0
P
PrintablesBuggi

Angel View selfie stick holder for Backpacks

This is a system to hold a Selfie Stick / Telescope Monopod with a 1/4inch screw mount on a backpack. It is designed to stick transversal outwards of the backpack to achieve the “Angel View” on 360° cameras. You can see an example here…

Downloads
33
Likes
13
Rating
0
P
PrintablesCB Prints

IQOS Stand for ILUMA PRIME and Terea Packs

Step-by-Step 3D Printing Guide: Prepare Your Files: Import the STL files for the stand base and holder into your slicing software. Ensure the models are oriented correctly for printing. Set Up the Print: For the holder, place it on its…

Downloads
33
Likes
2
Rating
0
P
PrintablesMarvin A

Clip for backpacks with strings

This is a small clip for backpacks which allows the strings to be tightened. Both versions have spikes to prevent (a little bit) the ropes from going down. Version 2 has a place to put the rope and prevent losing the clip. Printed with…

Downloads
32
Likes
6
Rating
0
P
Printablesmichael_w

Deuter Backpacks Belt / Strap Buckle AC Lite 14 REMIX

männlicher part für den bauchgurt des Deuter AC Lite 14 SL gedruckt in ABS

Downloads
31
Likes
2
Rating
0
P
PrintablesDionarap

Case for 18650 2S Batterypacks wit GoPro mount

an easy Batterypack holder for 2S 18650. top klicks in place. fits i GoPro mount's

Downloads
31
Likes
4
Rating
0
P
Printablesmarc_o_v

SUAFT-M: An AC & HEPA Filter for Enclosed Printing with quick change AC packs

This is a remix of @jonspaceharper's SUAFT air fiter. He encouraged me to make a modded version with magnets instead of screws for the AC packs, which worked rather nicely. The original model uses four screws to fix the activated carbon…

Downloads
31
Likes
6
Rating
0
P
PrintablesDionarap

Case for 18650 2S Batterypacks wit GoPro mount

an easy Batterypack holder for 2S 18650. top klicks in place. fits i GoPro mount's

Downloads
29
Likes
2
Rating
0
P
Printablesmofosyne

Device Charging Fin Holder (e.g. Smartphones and Battery Packs)

Intended for adding fins to IKEA Skadis parametric pegboard tray so you can charge smartphones and other devices on it… or you can just use it by itself to hold devices in a vertical manner as well… For enhancing…

Downloads
29
Likes
8
Rating
0
P
PrintablesRR_HIGGINS

Mil/USMC Compatible 1in Buckles for Packs/Slings

Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…

Downloads
28
Likes
4
Rating
0
P
PrintablesFilaMeister

Strap Attachable Scalable Sleeping Bag Holder For Camping Backpacks

I decided to create this sleeping bag holder when I realized that I was attaching my sleeping bag for a long camping trip to my backpack by means of using another, smaller backpack. This made no sense and did not work well. Now, however,…

Downloads
26
Likes
5
Rating
0
P
PrintablesAlessio

Heavy-Duty 25mm Side Release Buckle for Backpacks & Straps (No Supports)

I have designed this buckle to replace the one from my personal backpack. It should be precise enough to be used without post processing and without having any play. It's surprisingly strong, i haven't been able to open it by pulling on…

Downloads
25
Likes
0
Rating
0
P
PrintablesBayerwald

Ducati Hypermotard 698 Packs/ Slider

Slider für eine Ducati Hypermotard 698 oder Model mit den gleichen Maßen. Passgenauigkeit siehe Bilder. Bein an Bau wurden Radmuttern mit Fett/Öl eingesprüht um Rost zu vermeiden! Wurden auf einen Bambulab P1S gedruckt und die Schrift in…

Downloads
24
Likes
4
Rating
0
P
PrintablesAragonvi

hook to support backpacks and / or bags

Hello makers !!!, Today I share this backpack support, ideal to be able to place our backpack or bag in an assigned space and thus not have it in an uncomfortable corner or on the floor. I made the design to support a maximum load of 5 kg…

Downloads
24
Likes
1
Rating
0
P
PrintablesFlorian Wiesner

Replacement Backpack Buckle for BURTON Backpacks

A few months ago the buckle of my Burton Dayback 2.0 broke down. So I decided to quickly model a replacement part and print it out! With this model, you can customize your Burton Backpacks to match your personal favor and try out every…

Downloads
24
Likes
4
Rating
0
P
Printablessouthbaygsr

Hook for 10mm Rod (Caps and Backpacks)

I bought a closet organizer which has 10mm diameter horizontal rods on the sides. I modelled these hooks to fit over these rods for hanging hats, bags, etc. I printed them in PETG so they can flex over the rod. 0.6mm nozzle, 0.3mm layer,…

Downloads
23
Likes
1
Rating
0
P
Printables3D Mad Mesh

Magnetic clip for hydration backpacks or hippacks

I needed a stronger magnetic clip for my ‘Evoc Hip Pack Pro 3’ hydration hip pack and while I was designing this, I decided to make it a clip on baseplate. Now I can easily add one to any packpack strap with a width of 24mm. It slides…

Downloads
21
Likes
6
Rating
0
P
PrintablesHumpaPrinta

Mobile Power Supply WZ3605 for Bosch Battery Packs 18v

To build this you will need: 1x WZ3605 Power Supply Module ( https://s.click.aliexpress.com/e/_oppfBi2 ) Bezel: 79mmx43mm 1x Bosch Battery Adaptor (see picture bosch1.png/bosch2.png) (select bosch:…

Downloads
20
Likes
5
Rating
0
P
PrintablesRagingRoosevelt

Replacement Feet & Bungee Retainers for GCI PackSeat (Tripod Chair)

Print Settings If you'd like to remix this, the CAD is available on OnShape . Bungee Retainer PETG, ABS, or ASA are probably ideal. You might be able to get away with PLA but I haven't tested it I printed this with 7 walls which makes it…

Downloads
20
Likes
3
Rating
5
P
Printablesveritasrex

AAA Battery Holder (fits Costco 48-packs!)

A short, compact battery holder that fits perfectly into cabinetry shelving 155 mm deep (or wide, depending on your angle). Remixed from the great design by @StefanoUngar_1469270 . It fits Costco 48-pack batteries and I figured making it…

Downloads
20
Likes
1
Rating
0

Rigid 18V Battery Holder Carrier 4 Packs

One solid piece Rigid 18V battery holder for four battery packs. I designed the battery holder in Autodesk Fusion in the imperial system. I 3d printed the STL file in mm for Creality Print. I have uploaded the STL, F3D, and 3MF files to…

Downloads
19
Likes
7
Rating
0
P
Printablesdarkslyfo

Spirit Island Spirit Panel Divider (Branch and Claw, Promo packs)

I made an alternative spirit panel divider for Leon_H's Spirit island organizer. This makes it a little clearer which set is the Branch and Claw/Feather and Flame (AKA promo1 and promo2) spirits.

Downloads
18
Likes
1
Rating
0
P
PrintablesxAqua

Heets case for 2 packs

Same model for Gridfinity: https://www.printables.com/model/671906-gridfinity-heets-holder

Downloads
18
Likes
0
Rating
0
P
PrintablesBill Ruehl

End caps for 21700 battery packs!

These are a thin protective end panel to shield the bus on a 21700 2 cell parallel pack I built for a Meshtastic radio. Could absolutely be used in other ways. Here is the video of the pack build!

Downloads
17
Likes
3
Rating
0
P
Printablesfunkysod

Wall hook for backpacks

Wall hook for backpacks, main hook in aluminium

Downloads
17
Likes
2
Rating
0
P
PrintablesBric Designs

Tooth Care Caddy (for Costco packs)

This is an organizer for all of the tooth care products you buy at Costco - toothpaste, tooth brush heads, floss, etc. Specifically, it's designed to hold: 5 tubes of Colgate toothpaste 8 spools of Oral-B Glide floss 12 Oral-B electric…

Downloads
17
Likes
1
Rating
0
P
PrintablesPonglore

Half-Life 2 Citizen heads for wargame packs

HL2 Citizen heads for wargaming

Downloads
16
Likes
2
Rating
0
P
PrintablesMiki SP5ME

Camelbag tube holder repair kit for backpacks

I provide two versions, one with the possibility of securing the tube with a rubber band such as an o-ring seal, and the other a simple simplified version.

Downloads
15
Likes
6
Rating
0
P
PrintablesTuitXY

Backpacks Hook

I needed a hook to organize my backpacks so I designed this. Hope you like it! (they fit a 16mm diameter bar) Print Settings Printer: Witbox Rafts: No **Supports:** No Resolution: 0.2 **Infill:** 20% Filament: - PLA Category: Organization

Downloads
12
Likes
1
Rating
0
P
PrintablesJayycox

Psion Revo Travel Dock with space for add-on packs (LoRA)

The Psion Revo was a state of the art Personal Digital Assistant, originally produced in 1999, it has a version of the famous Psion sliding hinge and ran EPOC32 (a precursor to the OS Symbian). The PDA has a full keyboard, a grayscale…

Downloads
12
Likes
4
Rating
0
P
PrintablesTryspire

Dose Dock (Crush -Resistant Case for Quick Dissolve Pills in Blister Packs)

Summary The Dose Dock is a crush-resistant, compact case designed to protect blister packs of quick-dissolve tablets. It shields items from bending, crushing, or damage while offering quick access when needed. A small internal lip helps…

Downloads
12
Likes
2
Rating
0
P
PrintablesFellipeC

Desk hole hook for purses, bags and backpacks

This hook is designed to fit in the cable holes of desks. You remove the plastic grommet of the hole and replace with the hook. Now you got yourself a place to hang your backpack, purse or bag. Original file:…

Downloads
11
Likes
5
Rating
0

Battery Covers & Mounts for Milwaukee/AEG Slide-Style NiCd/NiMH Packs (SCAD+STL)

This archive includes the safety covers, as well as a model for a mounting bracket for storage convenience. These are for the early 2000's era Ni-Cd and later NiMH slide-style packs used by Milwaukee & AEG prior to the current Li-ion…

Downloads
11
Likes
1
Rating
0
P
PrintablesFreezingACE

Single Screw J Hook for Backpacks & Laptop Bags

When buying the table legs they only came with 2 hooks, but have 4 mounting locations, 2 on each side. hooked made in a similar look the the originals to be able to use the unused mounting positions to store other items. Designed to be…

Downloads
11
Likes
0
Rating
0
P
PrintablesSeriosha

Wall-Hook for Backpacks / Headphones

Not much to say, its simple, easy to print and deep enough (75mm overall) so that hangers / loops which are not flush mounted at the backplate of the backpack still fit. Can also be used for headphones. And ofc everything else you can…

Downloads
11
Likes
0
Rating
0