2,207 models
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Egg-shaped puzzle container with “cactus like” ribbed pattern on the outside. This maze is not complex, without too many long dead-ends; but there are no external indicators of where the “pointers” in the maze are located. Designed to…
Everybody that can sew should be making masks now.... (written 4/4/2020) If you intend to make many masks, a rigid template for tracing and / or cutting can make things easier and faster. This pattern is for the Olson Mask that we are…
Coaster with a japanese wave pattern loosely based on the idea from https://www.thingiverse.com/thing:4823069 Put a color change in at 2.00 and 3.80 to use different colors. If you use Octogram Spiral as the top and bottom fill pattern…
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
There's a positive and negative of the pattern, so one stamps the bricks, the other the grout. One gives an outset look, the other makes them look sunken. I made these to stamp oven hardening clay.
Waffle pattern handle secured with M4 screw and nut. Print Settings: Material: PLA, PETG Nozzle: 0.4mm Layer height: 0.30mm Supports: no Perimeters: 2 Infill: 10% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222
I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
This is a parametric design for a hexagon patterned keyring. The face has customisable name and phone number text, the hex pattern, main body size/shape, and all dimensions are fully and easily customisable in fusion 360 using the “user…
For instructions on how to design and print your own, go to: Designing Multiplanar Origami Printing Multiplanar Origami For a video guide on printing multiplanar origami check out: https://youtu.be/9Kdw_rEk18w To read about the research…
140 mm fan grill with hexagon pattern
I updated my old test patten to work with to work on KP3s-sized bed. Use gcode file to run it straight on kp3s 3.0 original firmware.
A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…
From time to time, my Apple Watch was knocked off the charging cable by accident causing it to not completing charging. It was quite annoying as the watch would be left useless without proper charging. Hence, an Apple Watch stand is…
INTRODUCTION: Use the included Fusion360 parameterized model to determine how many bins (i.e. trials) of different z-levels you want to include. You can also change the width and length of each bin (as well as the tab size) in this fully…
Bunnies! Just in time for Easter This collection of models contain the same Interlocking Bunny Pattern. It's designed from scratch with 3D printing in mind and can be placed on pretty much anything you can imagine. I've supplied the base…
Here is a sheet of the hoodoo hex pattern, wilI l update it with a few sizes and the parametric model when done.
As previously stated, this is a model for a receipt punch base. For the whole assembly, you will need to print the base and pick a nail. The one that I used had a diameter of 3.4 mm through the "body" (this is the diameter of the small…
Inspired by the work of user @Stepa_176595 , I've created my own version of the ring, but admittedly, without his work's fantastic “surface print”/"vase mode" properties. Check out his model and the magic behind it:…
I use it for vitamin C dosage. 1 spoon = 1000 mg Používám ji na dávkování vitamínu C. 1 lžička = 1000 mg Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
make shadow of snowflakes and bells pattern
I print it in PLA 0.3 mm high layer 80% fill in the few layers to make it strong
Print time: 14 - 16 hours (100% scale) 150mm height Note: The vase is meant to be decorative. Therefore, it's not watertight. Although, you might be able to fill it with dirt and plant flowers.
Add drawing with acrilic markers. Glue some brooch pin. Use 15-25% honey comb infill. Make sure to set top layer to 0. I printed with three color combination, but it does not matter.
Add drawing with acrilic markers for some vintage touch. Glue some brooch pin. Use contrasting colors to make the decor stand out. I used PETG but you can use PLA.
Make a starry pattern tealight holder using vase mode and under/over temping your hotend (do this yourself, although the picture is what was produced by the G-code. Try furry sides for a different look possibly.) MADE IN PETG
This is a set of offset guides that can be used with the, "FastCap Long Nose Marker". The “core part” will give a ¼" offset. There is a ½" and 2" guide that the core part will slide into. You can see what I mean in the section photo. You…
4 different sets of parameters for Fuzzy Skin (thickness and Point distance). From zero to the default values.
Floral inspired control knob for pretty much any standard 6mm potentiometer stalk, including most any LCD printer control panel. Quick color change for contrast. Prints better with a small layer height.
I wanted to see what all the top fill patterns in Prusa Slicer were, so I created 8 tiles to be able to print them. I printed in Prusament PETG at 0.2mm layer height on my Prusa Core One+.
This might be considered as a mod. I don’t know. The original looks good. The hex pattern looks good, but some colour makes it look even better in my opinion. But sins I don’t have a MMU or INDX and I didn’t want a flat lid. I made the…
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…
This is a stylish hex pattern design handle that is compatible with M3, M4 and M5 bolts, and comes in 6 designs for each. The M3 version of the handle has the perfect width for 1515 extrusion, while the M4 version is ideal for 2020…
organiser with grid pattern and removable separator 2024-05-18 update · uploaded a simple lid, to meet a request photos show printed in black matte pla and brick red petg-cf 0.20mm layer height 10% adaptive cubic infill dimensions > x:…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
Catch all tray with procedural ring noise pattern
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
A free file to help organize your kitchen sink.
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
A lot of you have requested that so here it is - a regular pattern Paw Pot design! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
These digital 3D printable models of Clay Wheels are meant to be used to create textures in clay and polymer clay, pottery clay, cake dough, fondant, fabric, and other materials. The download contains 18 OBJ files (reversed patterns…
This case was printed with ninjatek ninjaflex (85A) TPU. I printed this very slowly with my Ender3 with a bowden extruder. I had the best results printing the case with the pattern facing up and filling the other side with support.
vase with rectangular pattern
The source marked this model as adult content.
Textured Roll With Strong Wood Grain Pattern Hey maker! 👋 A texture roller to create a strong wood grain pattern on soft materials. Features: Works on foam, clay, plaster, and more – endless creative possibilities! Scaled to 60 mm × 145…
Rigid timber can be made to bend easily when laser cut with a specific pattern. I wanted to try 3D printing with this pattern and I'm pleased to report that it works quite well. There are three aspects here. Some models are the results of…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
Screw Top Lid Rugged Cylindrical Container Knurl Pattern. For the rest of the set go to: https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont…
Is your Benchy cold? Here's one with a knitted sweater, perfect for the holidays! Printed with Elegoo Brown PLA .
Make them earn their Easter candy with this egg maze container. Fun, yet not too difficult, maze to solve to open up the egg and get at what's inside. Printed in 2 pieces with 0.4mm nozzle and 0.16mm layer height. Supports optional.…
As with my other voronoi models, a plane cut should be made somewhere between 0.2 and 2mm from the bottom depending on the scale being printed. You need to have as much of the first layer complete as possible in order to get a successful…
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
Texture rolling pin for clays and epoxies. Can be used to create a pattern that's perfect for brick walls or floors. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the…
Updated 04.13.2023 I've added a .stl file for the X1C that avoids the extra purge line in the rear left corner of the machine. You'll need to run the print without the automated flow calibration. Use a known calibrated filament profile…
First layer calibration GCODE for Prusa printers, as implemented in Prusa MK3/MK3S firmware ( https://github.com/prusa3d/Prusa-Firmware ), originally created by Marek Bel. Enclosed GCODE files are generated directly by the firmware source…
Remix of MortalWombats Bambu Lab X1 Vase Mode Filament Poop Bucket. Print instructions: Like the original, this model MUST be printed in vase mode. It is recommended to print with a line width of 0.5mm or more.
I builded a 3D printer enclosure with the Ikea lack table. Finally I was not happy with the stability of the bottom one if you stack three Lack tables. So I have designed this angle bracket for improving the stability. For me it works…
A modern desk organizer with a subtle geometric surface pattern and a calm matte finish. Designed with three compartments, this organizer helps keep everyday items neatly arranged — pens, brushes, tools, stationery, or small accessories.…
This digital 3D printable model is meant to be used to create texture in clay and polymer clay or EVA foam and other materials. The texture of this wheel creates a Geometric pattern. We also have a collection of Clay wheels, cosplay…
This extension can be printed with PLA in one or two colors to improve readability. A basic metric ruler is needed, the extension need to be glued aligned with the 1 to 7 marking and the first 7 centimeter of the ruler. This pattern…
There are available three sizes, the first test size is 95x100mm, the second is for the Original Prusa MINI and the third is for the Original Prusa MK2/3. Individual parts can be connected with splited connector.
This bee watering tray is designed so bees can land and get water from between the hex posts and not drown. It is designed so that a small mouth Mason or Ball jar will friction fit inside the mounting ring. It does not need support…
Elegant 3D printable Clay Wheels ✨They're perfect for adding beautiful Aztec-inspired textures to all kinds of materials like clay, polymer clay, pottery, cake dough, fondant, fabric, and more! 3 patterns in STL print-in-place handle Size…
This is a high-resolution roller for putting a realistic leather/animal hide texture on clay. When printed, it's 14cm tall and produces life-scale leather texture, so it can be scaled down for smaller-scale leather.
This model is made as a part to teach students how to get into fusion workflow. Also how to be the part of printables community. Reimagined og figet toy.
Just a quick remix to add a hex pattern on the back.
This model is compatible with the lego system.
Update : Modification of the two tubes with voids. Use case I remixed an existing model to be smoother for children's hands when playing on the beach. This also allows for easier cleaning when returning home 😉. Impression Filament: PLA…
This case was printed with ninjatek ninjaflex (85A) TPU. I printed this very slowly with my Ender3 with a bowden extruder. I had the best results printing the case with the pattern facing up and filling the other side with support.
Updated the file to provide a better fit! Based on: https://www.printables.com/model/65918-airtag-wallet-card
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
Lego brick generator tool - for simple 2x1 or 4x1 bricks with brick pattern side. Very useful for architectural builds, castle walls etc. The pattern is on both sides and it is reccesed into the brick wall so it can be stacked side by…
Wet mold your 2-3oz leather around the lighter and let it dry over night. Then glue/stitch around.
Included g-code includes Hilbert Curve top fill and bottom fill, as well as ironing to produce a nice, smooth surface.
UPDATE: A maker asked if there were mounting brackets. I was just in the process of finishing up. So, here they are. A wall mounting bracket system and table display system - uploaded to the thing files. Your feedback really helps. Thank…
I wanted to make these rollers for a while, and finally looked into how to do it properly. By properly, I am referring to using User Parameters in Fusion 360 and constraints in the drawings. I printed them solid, and at half scale. I have…
A remix for the Tissue Box Cover #1 but with bottom lid from the Parametric Minimalistic Tissue Box Cover . Inner dimensions are 230 x 115 x 72 mm. Check out my other remix using this pattern at Soap Dispense Box IKEA Dragon I have…
This coaster creates a moving moiré pattern through the rotation of a center disc. Even when it's not being used to protect tables from condensation, the coaster can provide a mesmerizing visual and tactile experience!…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
A functional twist lock container featuring a clean honeycomb texture for extra grip and a modern look. Prints in one piece with no supports and works smoothly straight off the printer. Great for storing small parts, organizing your desk,…
Designed to allow quick and easy storage solutions for use with the Multiboard system with the following design objectives: Parametric Box or cylindrincal Honeycomb pattern to match multiboard asthetic Use two peg board holes for…
This model is compatible with the lego system.
In my experience, I would recommend slowing down the print speed to avoid any layer shifts. Also, the lower your layer height, the smoother the overhangs of each hexagon will be. Enjoy :)
BOM: Printed with ROSA3D High Speed PLA Gray and Light Gray Keep your space tidy with these aesthetic, stackable organizer baskets. Designed with a stylish pattern on the side walls, they look great on a desk, in a bathroom cabinet, or on…
6x 70mm bolt pattern drill guide, the holes are all 5mm including the center. Update 1 - fixed files for the guide with bearing Update 2 - added a version without bearing that fits a 32mm sized hole (old version is 35mm). and relabeled…
Textured Roll With Wood Grain Pattern Hey maker! 👋 A texture roller to create a wood grain pattern on soft materials. Features: Works on foam, clay, plaster, and more – endless creative possibilities! Scaled to 60 mm × 145 mm with a 25 mm…
For this to work you have to download the casing from my Business card Embosser (LINK!) As many requested, the CAT Rollers for the Business card embosser! (Only rollers, no casing) More rollers will be added in the future! Keep an eye on…
Hex pattern face for voron mini stealthBurner V0.2 printer original file from voron design page thanks to them 1st printed on two step Gcodes Hex pattern Main body more information how to do it go check Here please .. hope you like it and…
I love the box by MrElektro @MrElektro_32607 . I wanted to create different size boxes and also wanted a stackable version. I've not had much luck editing and scaling .step files . I'm also concerned that things like wall thickness won't…
A simple filament guide that I created for an ender3v2. It slide in the top V-rail
I wanted to see how the different infill patterns look, so I've prepared a collection from all options in Prusaslicer. 16 pcs of hexagon, each with different infill - and they look really great! I've attached the prusaslicer project and…
After printing, this roller can be used to create a knit pattern on a soft material (like clay). I printed with PLA defaults (2 perimeters, 15% infill), a 0.4mm nozzle, and 0.15mm layers.
This is a simple .dxf hexagon pattern you can use this to create hex pattern cutouts etc in your cad models.
![Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]](https://media.printables.com/media/prints/549902/images/4418204_cc329943-2227-45f1-807c-9f0d489720d7/pxl_20230810_151038751mp.jpg)
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware]](https://media.printables.com/media/prints/104767/images/1049067_18c18458-fa9e-4654-902c-b1e97a049d27/4c891d12cf05afc76616116d7b423361_display_large_10.jpg)
