4,963 models
Dimensions (LxWxH) 162,5 x 59,4 x 47 mm (100% scale) Basic information A new, fourth, addition to my Articulated Sea Life collection, I hope you will like it :) The model is divided into 6 movable articulated segments, which grant the…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
This is an articulated dolphin - Clipper. It is flexible, requires no supports, and was designed to be printed in place. Recommended print settings layer height: 0.15 mm infill: 10% gyroid perimeters: 3 supports: no The fin should be…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Philadelphia Eagles Logo 1st Layer Gray 2nd White 3rd Green 4th Black
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Dolphin necklace A nice little gift which takes less than 30 minuets to print. Uses less than 1g of filament The model is small so unless a printer is set up perfectly stringing can be present. Some time and care after printing may be…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Phillips One Blade Holder with space for accesories
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
3D printable wall mount for Philips Hue Motion sensor , give a little bit wider rotation angles, and allows easy battery changes while keeping the mount aligned to the correct direction. Check out all the mount options . The mount is…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
xenomorphic Chess Piece Set. Added STL and OBJ versions on 12/1/2024
Print approx. €18.53–€22.64 excl. taxPreliminary estimate for one variant
Miami Dolphins Logo 1st layer white 2nd Blue 3rd Black 4th Orange
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
Print approx. €8.88–€10.86 excl. taxPreliminary estimate for one variant
Easy to make a cute Dolphin keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This remix will hold a majority of the Philips Multigroom MG7750 accessories. I wanted a tray that would hold both the smaller beard guards as well as the larger hair guards. This was created using @Scatterthought's modular files. I used…
Print approx. €5.04–€6.17 excl. taxPreliminary estimate for one variant
About the design I designed my own 180° Uphill Track that fixes two issues I had with the track from Cannela Verde : The Angle is wider, so the trains, even three-axle trains, fit better on the track, even electric trains are able to…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
Miami Dolphins logo (200x150mm) that is designed for 2 filament changes allowing for all three main colors. This model was designed for 0.20mm layers with M600 layer changes (in the STL file) at layers 10 & 18.
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Philipoemen - Greek General Fixed 1/31/2024 - removed old files. Philopoemen /ˌfɪləˈpiːmən/ ( Greek : Φιλοποίμην Philopoímēn ; 253 BC, Megalopolis – 183 BC, Messene ) was a skilled Greek general and statesman, who was Achaean strategos on…
Print approx. €12.93–€15.80 excl. taxPreliminary estimate for one variant
With my DLP printer in mind, I wanted to redesign the original model, so that I could print a complete model and cone in 1 pass. (please read on.. there is also a FDM print) In the video it was showed that if you put 2 tracks together,…
Print approx. €7.31–€8.94 excl. taxPreliminary estimate for one variant
This is a remix of the original model by fabrik872 : https://www.thingiverse.com/fabrik872 Original model site: https://www.thingiverse.com/thing:3693224 Chernobyl graphite block from inside the reactor RBMK with fragment version.…
Print approx. €6.49–€7.94 excl. taxPreliminary estimate for one variant
Just designed my own vertical Holobox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Slide in the acrylic glass sheet and put your smartphone on the top. I also made a “horizontal” version check…
Print approx. €10.38–€12.69 excl. taxPreliminary estimate for one variant
ENG Attention: Not a genuine Philips component! You want the light strip to shine on the ceiling? No problem with this wall bracket. Simply screw it to the wall and clamp the Hue Light Strip in place. With several clamps, arches can also…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with Red, then Black. Before you ask, the 66 is supposed to be crooked. Quick Guide…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
This desing is inspired by Fulcrum Knives Eclipse Morphing EDC Knife. Eclipse features a button lock , frame lock style, design that snaps into place when the blade is opened and closed so the blade won't come open in your pocket by…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
Border fixed manually, point by point. Total surface 10500 Km2 → 99% accurate. Z exaggerated x3.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Coin with the silhouette of a dolphin engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Die Station wurde in Pla auf dem Prusa MK4S gedruckt. Andere Filamente wie PETG und ABS funktionieren natürlich auch. Die Anti-rutsch Unterlagen sind in TPU gedruckt. Verwendet wurde eine Schichthöhe von 0.25mm, 15% Infill und…
Print approx. €5.61–€6.85 excl. taxPreliminary estimate for one variant
Just a simple ring design to mark individual Philips Sonicare brushes. Quick to print and reusable. Mine have been in use for some weeks now and so far there are no problems or collisions with the rest of the toothbrush. How to install:…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Introducing the new MatterHackers mascot: Phil A. Ment! Designed with troubleshooting in mind, Phil has several features specifically to put your printer through its paces. These features include: small inset details, small embossed…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
This model represents a reinterpretation of a classic Zen sand garden. As a 3D printing enthusiast, I am captivated by the distinct lines that this manufacturing method leaves on the models. In this design, we have replaced the lines in…
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
3D Printable "eyelids" for Philips Hue Motion Sensors. If you need to partially block part of the monitored area.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Created from a GIS downloaded model and scaled down for 3D print
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This lid covers the ground coffee bypass for Philips Saeco 1200/2200/3200 series superautomatic espresso machines. Fits the same space as replacement part number 421944084601, but this has vents shaped like a dog and cat instead of…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Replacement screw cap for bathroom loo fitting. You may need to trim the tip, depending on how crusty the screws are. Printing parameters : 0.10mm layers for smooth cap print cap upwards per model default orientation supports can be…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for PETGSource material: PET
Cleopatra VII Philopator and her Daughter Cleopatra Selene II Cleopatra looks like she is having a Minor TIA. may need to get back to that. Cleopatra VII Philopator, the last active pharaoh of Ancient Egypt, was a legendary figure in her…
Print approx. €20.10–€24.57 excl. taxPreliminary estimate for one variant
From original broken part I modeled spare part of OneBlade attachment
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
A Articulated dolphin Recommended print settings: 15% gyroid infill 100%-200% scale 0.15mm layer height Brim: no (parts may fuse) 100% speed Finally… Happy Printing!
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
If you have purchased a Philips Sonicare toothbrush set for two people, you probably, like me, only have one charger base. My model quickly, easily, and inexpensively solves this problem. Just remember to switch your toothbrushes on the…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
A stand for the Philips OneBlade + Philips NT3650/16 S and its standard accessories.
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
!! Print at 3x scale, else tolerance will be incorrect !! The following datasets were used: height model: swissALTI3D landscape model (Buildings): swissBUILDINGS3D 2.0 Steps: Combining the height model and the landscape model into a…
Print approx. €7.12–€8.70 excl. taxPreliminary estimate for one variant
This 3D-printed Caesar Cipher Ring is an educational and functional tool to encode and decode messages using one of the oldest known ciphers. Here are the key characteristics for your printable description: 3D-Printed Caesar Cipher Ring…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for one variant
Simply print with supports (for the clips themselves) at 0.2mm. When printed, put on the smallest size and expand to the max (7mm trim length). Take your shiny new print and clip it on. It can still move so it's easy to remove but it…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Replacement parts for SpeedPro
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F
Print approx. €7.71–€9.42 excl. taxPreliminary estimate for one variant
Charing stands for Philips S9900 series shaver. Put a shaver on the stand, and you can charge your shaver. If you want to travel, you can easily disassemble and take out the charging cable from the stand. It fits with the Philips S9900…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Travel box for Phillips Sonicare plus two Curaprox inter-dental brushes and TePe flosser. Box is held together by a set of magnets 9x4.5x1.6mm glued in place. Joints are locked by two stainless steel pins 30mm x diameter 3mm (real…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for PETGSource material: PET
This is Philips OneBlade holder.
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
I found a way to generate topographic maps from saetlite data, then used prusaslicer 2.7 to emboss a track map on it that matches the curves of the hills in the area. the result is a 3d printable topographic track map The finish Line is…
Print approx. €6.15–€7.51 excl. taxPreliminary estimate for one variant
This remix will store a few of my most used accessories for a Philips 3750. This will take up less space on the countertop. I used a few of the modular parts included in @Scatterthought's model and imported and arranged them in OpenSCAD…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
I believe that the part number is 421944040481 ☺️
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a customizable base that works with any of Flowalistik's Trophy set cups. Base and plaques are easy to scale. I found printing everything at 300% made for an ideal trophy size. Once you print the base and plaque, head over to…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Designed for the " Philips OneBlade & Kingdom Come ⚔ " contest, this case combines medieval aesthetics with modern functionality. Whether you're a humble blacksmith's son or a knight on a quest, this case ensures your grooming gear is…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Ferrari Dino 156 F1 #4, Spa, GP Belgium 1961, Driven by Phil Hill.
Print approx. €5.97–€7.30 excl. taxPreliminary estimate for one variant
The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €17.88–€21.85 excl. taxPreliminary estimate for one variant
Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Description I needed to keep my Philips Hue® outdoor LED strip unplugged in the garden, and I decided to print a little cap to screw on the connector to avoid ruining it with humidity and weather. The M15x1 thread seems hard to print, but…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This a Babyphone Camera Holder for the Philips Avent (Modell SCD923/26). It can be used to store the babycamand a powerbank, which can be used to power the babycam. Dimensions: Theoretically it can fit any babycam with a stand of 70mm.…
Print approx. €12.49–€15.26 excl. taxPreliminary estimate for one variant
This model makes the Philips Avent DECT babyphone transmitter and receiver stand more stable on its ground as they tend to turn over quite easily, especially the transmitter unit with its stiff cable. This model consists of two parts: for…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Der Bohnenbehälter verstopft immer die Schraube des Shredders. Für die Demontage bei Problemen immer ein Gefussel.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Kingdom Come-inspired OneBlade Stand Tower General Information The original charging cable is integrated into the tower. The cable simply needs to be threaded through the parts and pressed into the designated grooves, then the cable is…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Just a nice, quick, and simple way to label brush heads. Install by just lining up the ridge and pushing it in. the print in all takes only about 10 minutes total on the slow 45mps
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Rackmount for a Philips Hue Bridge to mount it in a 2U 19" Modular Rack Printed without any Supports For The Rack you can Buy the Metal one here:…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for PETGSource material: PET
I have made a support for mounting Philips Hue Play light in IKEA Lack table for Prusa mini printer. Have fun printing. Print instructions I have printed in PETG with support on build plate only. Perimeter at your choice.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
A playful take on the iconic Sphinx — now with jiggly articulated legs that sit perfectly on any edge! 🗿 Height: ~43 mm 🦵 Fully print-in-place articulated legs for smooth movement ✨ A humorous tribute to one of the world’s most famous…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Punic zoomorphic Askos (late 5th century BC) The use of this type of vessel was frequent among the Phoenicians, Greeks and Cypriots, being related to the afterlife. In Ibiza there are mainly representations of doves (symbol of the goddess…
Print approx. €13.33–€16.29 excl. taxPreliminary estimate for one variant
Made this in Fusion 360 to fit onto my frame. I use philips hue control from octoprint PSU control plugin. https://community.octoprint.org/t/get-octoprint-psucontrol-running-with-philips-hue-smartplug/19057 And this makes my light turn…
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for PETGSource material: PET
Philips Rondo Gear
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
I have designed a simple holder to charge my Philips OneBalde. I was inspired by the projects of two thingiverse users: https://www.thingiverse.com/thing:2828872 https://www.thingiverse.com/thing:3437160 However, I tried to simplify the…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Dimensions: 46.99 mm x 110.75 mm x 13.86 mm Parts Included: Graphics card Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
Toothbrush stand / holder for 1 Phillips Sonicare Recommended to print from PETG (doesn't hate water that much..) Used default slicer settings, no need to modify anything. It can lay flat, or you can add generic silicone feet (from any…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Charging stand for the Philips OneBlade shaver. Simply connect the cable that comes with every OneBlade to the shaver, and you'll never have to worry about running out of power again.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Affiliate Link (Hue Gu10) : https://link.amazon/B03H3JSlP Printed with PETG and TPU Try out the printed parts if they fit together before mounting Mount the Bracket first put the Buffer Ring onto the bulb corpus put the Bulb with the…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
A geographically accurate school model of a fjord for teaching the Earth's lithosphere.
Print approx. €6.19–€7.57 excl. taxPreliminary estimate for one variant
This lens board is designed to mount a Fujinon SWD 75mm f/5.6 lens on a Graflex Super Graphic. Other lens/camera combinations may work as well. The model has two parts, the board and the frame. Print the board first. Print the frame with…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
This wall mount is designed for the Philips Nose trimmer Series 3000. The locking mechanism is designed for easy handling and good grip. Various holding options are built into the back. In addition, the surface is large enough that the…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant
Starting point of the project was learning about past sanitary customs and finding shapes which had the potential to be repurposed into functional bathroom object. The main inspiration comes from medieval castle toilets, which typically…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
I use my Philips Hue v1 dimmer switch as a scene controller in my office. I wanted it mounted under my desk to remove clutter but keep it easily accessible. I created this mount designed to work with 3M Command Strips to mount the dimmer…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Living room lamp shade, Philips Hue bulb.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Holder for my most used accesories for the Philips 7745 trimmer. I printed it in white PETG, my model released from the build plate at the ends so I have added brim to the one uploaded here. V1, initial release
Print approx. €6.05–€7.40 excl. taxPreliminary estimate for PETGSource material: PET
I designed this holder for Philips One Blade razors to free up sink space. It works without an elastic band, but I still recommend using one. It opens when the razor isn't in it and closes when it is.
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Hello i downloaded HPauls design of a photographic sweep stand which was uploaded by Reed G, I found the pin to be way to loose and rendered the print unusable when using the V2 files. I ended up recreating the pin to be a friction fit,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Auf Wunsch nun hier die "Komplett Variante" meines bewährten Models ( hier ) für Rasierer Kamm und dem kompletten Zubehör. Ich habe in die 3mf und bgcode Datei einen Druckstop eingebaut, damit kann man die Beschriftung für die Bartlängen…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
I designed this because I reduced two switches down to one switch in my kitchen. The old plate was oversized so I wanted to make this new plate large enough to cover the imperfections in the wall paint. Print face down with smart fill…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
The power connector was designed for FM1000 series VHF transceivers. The power connectors of these trx are very hard to get. They use standard molex-pc connectors. Printing Print using a 0.25mm nozzle. Use PETG material, it's much more…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
I have a Philips Senseo Switch coffee maker in my van. It can make two cups at once, but the drip tray really isn't big enough to hold them, and when one cup fell off due to the vibration of the pump I decided to make this. It is quite…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
This may look like a decorative print created for aesthetics, but it has more of a functional purpose, but with one caveat. Philips Hue Motion Sensor is not only a convenience device, but also a security device. The security functionality…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Rail-shaped feet for 55OLED804 Philips TV series to elevated TV (above a Bose soundbar in my case) STL file made with tinkercad.com I added holes in the middle if you need to secure cables. Printed 2x in the .gcode file NB: It's my 1st…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
🇯🇵 Welcome to Northern Japan! This is a simple map model, based on existing files shared by the Geospatial Information Authority of Japan . The source are maps of Hokkaido and Aomori prefectures in .OBJ format, high file weight and voxel…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
