483 models
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
-Uses six M3x20 screws for the hinges and latch. -Uses two 3mm x 1mm magnets for the small parts storage compartment (optional). Storage for: 1 x Pinecil (TS100/TS101 BETA versions still testing) 7 x Short Tips (6 x Tips for TS100/TS101…
This is a remix of another Pinecil Case adapted to contain the Pinecil, the official cable, the official mini stand and 4 short tips. This case is smaller than the original model because only compatible with the Short Tips. The hinges are…
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
This is my Gridfinity-compatible Pinecil holder with storage for 5 tips and a lid. Made using this Gridfinity Add-in for Fusion 360. The bins have little grooves on the inside, so the lid snaps in place and stays on. The V24 version has…
Pine64 Pinecil flip case. Two neodymium magnets 12x2mm required, to hold the lid in closed position. No supports needed for the print.
Saw different versions of the stand and decided to combine a few ideas and create a new version: Reinforced Stability: Thickened the stand's design, ensuring it remains securely in place. Effortless Removal: Added grip makes detaching the…
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
Remixed the two cases together for a watertight, more rugged option. Modified to suit 2m cable instead of 1.5m in the original, and hold the pine64 pinecil mini stand. (use VHB). Pics to follow soon Also added different options (bottom…
I made this remix to fit two inserts in the top and my powerbank in the bottom piece. You can either fit two inserts next to each other in the top part or use the dual width one i made. The one i made allows for a sligthly longer cable…
I bought a Pinecil v2 to replace my trusty Ersa Tip 260 as it became bulky and unwieldy. Especially when I just need to solder 4 wires to a ESP32 that will get stuffed in a tiny 3D printed enclosure. As I wanted to dip my feet into…
This model has some flaws (see the Makes & Comments section). Unfortunately, I'm not going to fix them as I no longer use Pinecil
My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
A soldering iron stand for your PINECIL & TS100/101 “RUGGED CASE” w/ finger groove for easy removal. Needs a 608 bearing, M3 screw, and M3 hex nut like the original. Optional M3 heatset insert option added (5mm OD x 4mm Length).
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
A universal adapter for the X20V Parkide tool battery with an addon for connecting a Pinecil or T100 style soldering iron. The adapter can be used to attach your own addon. I included a step file for remixing the designs to your own…
I expanded the Rugged Multipart Pinecil Case (V2) to include holders for four tips, a flux syringe or Hakko flux pen using the model from the Pinecil Storage Box , and a small container of tip tinner. For best results, print the soldering…
Mount for a Pinecil soldering iron for Ikea Skadis pegboard Inspired by and using hook from IKEA SKADIS Universal Hook Set
Here's a video explaining the design: The 3MF is in 2 parts, I recommend putting them with their flat ends down on the bed and about 20% infill on an FDM. It really is very small: 113mm x 39mm x 19mm. I've made 3 of these, there was a…
This is a stackable Gridfinity Pinecil bin stack that can store your soldering iron, 5 tips, charging cable and other accessories while taking up only 3x2 grids and is shallow enough to fit in an Ikea Komplement with ample clearance . I…
This is a Gridfinity stand for the TS100 / Pinecil soldering irons. IMPORTANT: This uses the Strong Stand by Termiman . The base uses the Gridfinity Refined design, so you can press fit magnets in to the base, rather than requiring glue.
I was inspired by the few Omnifixo Pinecil case designs, but wanted a version that would also hold solder and a brass sponge so I had everything I needed to solder on the go. This version will require 4x 10mm ball bearings. These ball…
Revision history Revison Description Date Rev2 Increased dept of recess for tip ground contact wire to reduce risk of damaging it while inserting the tip. Reduced height of "stand" on the lid to make it easier to mount the grip.…
Reason for designing this None of the inserts I saw for PjotrStrog's rugged pinecil case were able to hold 7 soldering tips without compromises to everything else they can hold. because of this I decided to do some remixing and make the…
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…
Updates 11/2025: Added a version for third party tips with 4.0 mm shank size (thin section directly behind the heating element at the front). The original Pine64 short tips come in 3.65 mm shank size, as do many third party options. But…
CNC Kitchen TS100/Pinecil heat insert tip holder bin for gridfinity
4/14/2025 Modified the tip holder tab to be offset as it became apparent that it is interfering with the iron. Images do not reflect the modification.
I wanted to have a flat organizer for the Pinecil and tips that would fit onto the Gridfinity grid. So I combined / remixed two models to create my version. I had to adapt the shape of the original organizer to match the Gridfinity spacing.
This is a parametric solder spool that I originally remodeled for the Pinecil case created by Termiman (which is a remix of a remix of a remix from what I understand). By adjusting parameters within the included Fusion 360 file it can…
This is a remix of Olvin's case for the Pinecil soldering iron. I used his CAD files and also the Pinecil 3D model available here: https://github.com/kohkohwastaken/3D-Models/tree/main/Pine64 Besides adapting it for the Pinecil I made…
I used the following one, i can't guarantee that all AliExpress versions will fit though. https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order_list.order_list_main.16.13111802lsBWzr This will fit the M2, M3, M4, M5, M6…
Fixed the stand to fit tighter in the holder and to hold a standard 3mm nylock nut.
Stand V2 Copper sponge and Long tips https://www.printables.com/model/1150956-soldering-iron-stand-for-pinecil-v2-long-tips
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
Edit - I've used this for six months now and I don't have any desire to redesign stuff. It's worked out really well! My Hakko does not come out nearly as much with this solution at hand for small projects. This is a Pinecil case I…
This Pinecil Case is designed for make it mobile. With a power bank in it you can solder wherever you want and no longer need a power socket in your area. You can place following attachments in it: CNC-Kitchen Soldering Tips & Adapters, 4…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
This remix design was based on the parametric rugged box from the following link: https://www.printables.com/model/258431-rugged-box-parametric. It contains the outer shell only. It is 100% compatible with tool inserts from the original…
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
I printed and used the Horizontal Pinecil Insert from @irwtdvoys for a short time before noticing it was missing the holder for the wrench and screws. To resolve this I took the insert from the original case and modified it to hold the…
I wanted to create a Pinecil organizer for my toolkit, with place for all tips and other things required for soldering with it. Pinecil comes with one tip and the two sets of tips…
Gridfinity bin for pinecil. Mine is Aliexpress Pine64 version. Fits one TS100 and main unit. Stackable. Created with Fusion gridfinity plugin.
Inspired from the Pinecil 4x Tip Holde r I have change the model to fit 7x tips. I do recommend putting the larger tips to the sides. Note: when they are all attached it is a bit hard to pick one up, it is very tight in there.
Multiboard mount for your Pinecil, 8 tips and small box for your power cable, Cheetos or other accessories. Print Settings 0.12mm Layer height 1.2mm Walls 15% infill - Grid Support used for the Multiboard mount Buy me a coffee
This model builds on the fantastic Pinecil storage systems already out there. To complement a lot of the less featured, minimalist designs out there, I wanted to cram as many features as possible into one of these boxes. This box includes…
I got the idea for this from the container by "Zombie Batman" (linked as a remix, though I did model it from scratch to fit my purpose) It fits the Pinecil case made by Termiman (also linked as a remix to make it easier to find), or at…
Holder for Pinecil, CNC Kitchen heat insert adaptors and one soldering tip.
Update: Added Fusion360 files A holder for the pinecil case found here https://www.thingiverse.com/thing:5186002 For the gridfinity system created by Zack Freedman
Just a simple design to help you organize your workspace. Now you can swap hot tips without burning yourself! It holds 5 soldering tips and 2 pinecils. Also has a small space for a USB-C cable. You will need two 608 (skateboard) bearings…
The Stand has been remixed to allow it to take the longer soldering tips
I propose a remix of the Tinghiverse support https://www.thingiverse.com/thing:2416282 in which I adapted the upper part for the Pinecil Pine 64 welder. In particular, the front diameter of the support has been calibrated to contain only…
Only fits the newer “short” tips (SKU-PINECIL_TIPS3 and SKU-PINECIL_TIPS4). With the standard upright Pinecil insert the case will close if the base of the Pinecil is against the wall, it's a tight fit. Added a new 8 tip holder, from…
Somehow every Gridfinity Pinecil bin out there just has a few holes, along with a spot for the Pinecil itself. But I bought a bunch of different tips, so I need a place to put them all. The holes are tight enough so that you can tip the…
Changed the parts around latches to make them easier to reach
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Jan 11, 2024:] added a case that fits long…
This is a remix of spTim's fantastic soldering station for the TS80p. I have a Pinecil soldering iron, so I made a bunch of updates to the original design so that it will work with the Pinecil. iron holder - Pinecil.stl I updated this so…
I decided to create a blank insert to store different things in the Rugged Multipart Pinecil/TS100/TS80 Case. I tested it with @aikano9's remix which allows me to have a multipurpose space on a second level.…
Gridfinity Pinecil soldering iron stand
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** These hard cases: Fit the Pinecil Smart Mini Portable…
A holder for a Pinecil, USB-C Power Cable, and up to 8 iron tips.
This is my first attempt at modeling something. I wanted a case that could fit at least 10 SHORT tips + all of the aliexpress brass heatsets. This includes a slot for the M2.5 heatset. It can hold up to 4 standard length tips, 2 near the…
I printed the rugged case for my TS100 (https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and noticed, that the stand for the soldering iron would not snap securely into the top of the case. Also the…
There is a veritable ocean of really well-designed boxes out there to organize your Pinecil soldering tool… but none of them were exactly what I needed, so I made my own and added another drop to the ocean. My design is geared to…
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
Summary: These are custom inserts for the Pinecil rugged case. I remixed some models from other users to better fit my needs. Hardware Notes: The brass and wet sponge cover will require M2 screws and the respective heat set inserts to…
A small 3x1 gridfinity piece to store your Pinecil V2
Other models I found were too tight, held them vertically or the tip storage was too short Holds 1x Pinecil v2 4x Tips(tried with https://www.amazon.com/dp/B07NPKK1PB which is longer than the tip that came with my Pinecil)
a gridfinity magnet base for the pinecil and ts100 soldering iron, has a compartment for brass sponge to replace the giant spring soldering iron holders. designed so the tip does not extend past the back side of the base so it can still…
This insert takes the original “TS100/Pinecil Top Large” insert and adds storage for all 7 heatset insert bits that come with the AliExpress tip. Also has a bit larger tolerances, which makes it easier to remove the small bits.…
I recently bought a Pinecil soldering iron and wanted to add it to my little piece of Honeycomb Storage Wall. I couldn't find one (though didn't look that hard) but found this fantastic mount that fits the IKEA peg board thing. Pulled it…
Remixed from TS100 Soldering Station on Thingiverse by sunbart . A stand for the wonderful TS100 or Pinecil soldering iron, with a place for a copper wire tip cleaner and a spool of solder. This remix does not require the bearings or…
Made the case bigger to include USB-C power adaptor. It can be printed on a Prusa Mini Remix of https://www.printables.com/model/237958-pinecil-ts100-ts101-ts80-ts80p-case-with-options-s
Accessory that allows safe usage of T12 tips in Pinecil V2 soldering iron.
Holder uses 608 bearing, M3 Square Nut and Bolt.
Wanted a combo of a few different options so spliced/merged/tweaked some different STL's to get what i wanted
Pinecil Gridfinity bin made to be as compact as possible. It manages to the soldering iron and one tip in 3x1 3U high bin and still be stackable according to Gridfinity Standard. Made to fit in my Omnifixo inspired storage box , but…
Securely holding the bearing @@ omgwowbbq
This is a grip hold for the Pinecil soldering used and it is aimed for use on Termiman's storage box or any of its variations. The goal of the model is to have a reliable support for the soldering iron for extended amounts of time, as I…
Holds the Pinecil on its side avoiding interference with other inserts.
Ikea Skadis compatible holder for Pinecil
I like the gridfinity refined base much better than the regular ones, I needed a pinecil holder so I created a mashup, enjoy!
This Pinecil/TS100/TS80 Stand is a modified version of the original by Termiman. Instead of using a bearing which is held in with a screw I used a M8 nut I had laying around. It is simply press fit into the printed part, depending on your…
An adaptor based on macsboost's Milwaukee connector, to allow you to use your TS100 soldering iron on an M18 Fuel battery. Print instructions Category: Electronics Summary An adaptor based on macsboost's Milwaukee connector, to allow you…
I just got a Pinecil and wanted to make a handy stand for it! Please comment if you want something else like a solder roll holder and I will try to update it with your request :)
Here I have created a remix for the Rugged Piecil XL box from BLACK. for heat inserts : https://www.aliexpress.com/item/1005006503495825.html So I have redesigned to 2 soldering pin coils.
Adjusted to fit over the rubber grip. A second variation that would fit the pinecil without the rubber grip would likely be more secure
This is a remix of “Pinecil rugged case” with a few tweaks: The box has been resized and includes a pocket to accommodate a Shargeek 65w GaN charger ( https://www.amazon.com/gp/product/B0B187CS82 ) The tip storage has been increased to…
Remix of a remix of a remix. I adore Stefan's TS101/Pinecil heat-set insert tip, so I adapted the much-loved Pinecil case to hold its ends! Assembly should be pretty straightforward, install QTY 6 M3 heat-set inserts into Lid_1 and QTY 6…
Horizontal Pinecil & ENGINEER SS-02 Insert for Rugged Case. Needed an insert to hold both a Pinecil & ENGINEER SS-02 Solder sucker. Found two models: A holder for a Pinecil (Horizontally) and it's cable. A holder for a TS-100 and SS-02.…
This is a Gridfinity bin to hold the Pinecil, TS100, TS200 heat set insert tip set from CNC Kitchen. The bin itself was created with the GridfinityGenerator plugin for Fusion 360 by Lev Mishin. Printed on Bambu Labs P1S in PLA. 0.2mm…
Soldering pen and brass wool holder. Fits Pinecil, TS100, or similar soldering pens Printed in PLA. Balanced, no weights needed. 3 hour 20 minutes print on an Ender 3 V2. Hardware : 8mm ball bearing(608, 22mm outer diameter) for soldering…
Soldering iron stand for Pinecil v2 made of 2 bearings D22x7, beer lid D28x7, sponge 50x40x5, copper sponge D34 and a little 3d magic The model has been completely redesigned: It now supports long and short tips. Added a hole for a copper…
A case to hold the short tips for the Pinecil V2 soldering iron I wanted a compact way so store and protect the extra tips I bough for my Pinecil V2 but I couldn't find anything good online so I designed one. If there is interest I could…
![#0117 Pinecil V1/V2(BB2) Smart Mini Portable Soldering Iron Hard Case [2 Sizes]](https://media.printables.com/media/prints/670454/images/5353924_6e7c94e6-92a1-47bf-ab0b-a15ac30893b4_2d36bceb-8f66-4386-8114-1dac6445cf0a/20231212_163347.jpg)
![#0120 Pinecil V1/V2(BB2) Hard Case for Smart Mini Portable Soldering Iron [4x Long and Short Solder Tips]](https://media.printables.com/media/prints/707372/images/5799893_63b32ed3-1fd9-4f9b-8fb9-50cff4bf3655_ddbabf90-1a1a-4db2-8426-259fbbb81d1a/20240128_195410.jpg)
