881 models
Note: The examples are printed in Prusament Vanilla White, but is not the best choice. In my opinion, Prusament Pristine White is much more suitable, but I can't test this because I don't have it. It is difficult to show an accurate…
… to figure out, designing a PLA based brick with similar properties as the well known original one, is harder than he thought. Print settings: Layerhight: 0.2 or below. Otherwise structure dimensions will not fit well Material: PLA.…
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
2 colors recommended. Print instructions Print face down ,0.15mm resolution, color swap at 0.65mm.
Intro This is an updated and modified version of my previous Workbee dust shoe . The previous version had a wing nut sticking out of the side (which I found a bit annoying although it wasn't hitting the Workbee frame) and the attachment…
The Chromatic Countdown Apparatus (a.k.a. Learning Tower) I designed to help teach my kids polygons and color theory that can also be a fun learning game. The tower employs polygons from a Digon(2-sided) to a Nonagon (9-sided). Each…
Used 8mm thread from screwiverse and swappable wall mount bracket to make this for game controller display shelves on my honeycomb storage wall. Love the screwiverse system in tandom with the honeycomb storage wall and the universality of…
Spodní vodítko štípačky dřeva Scheppach HL 710 vytištěné z ABS , originál je z PP 66 , ale díky ceně za potřebné 4 kusy ekonomické si to tisknout z ABS.
The model is a 100-mm-diameter lazy susan turntable with a swappable bore hub - just lift a bore out and push another in. It's designed to allow a 3D printer to draw filament when the spool is rotating around a vertical axis. It's useful…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Print Settings: 0.4 Nozzle 0.2mm Layer Height 40% -60% Infill of choice 5 Perimeters Printed fine without any supports on MK4. I used Prusament filaments. Materials and Tolerances: PLA with T-0.1mm pretty much screwed in without any post…
v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…
High polygon version, no supports needed, very easy print. Print Settings Printer: Artillery Genius Pro Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 10 Filament: Sakata3D PLA850 Skin Tone 1 Category: Creatures
Guide Printed with PLA, can be printed with any material Assembly: Just glue parts Source The source is a Blender design (.blend) given in files Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
I remodeled and made some changes to an existing design for an UppaBaby Vista stroller cup holder. I provide 3d files with the design as well as the stl for both part: the cup holder and the clip. please note that I didn't had the chance…
Let me introduce you to my minimal-assembly collapsible lightsaber with a lever lock. Not including the blades, the hilt only uses 3 parts! The blade is interchangeable to be any color you like, and you can add the dual lightsaber mods to…
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Remodeled the original "Peppa Pig Cookie cutter" by RoelP (thingiverse) , which required >6mm dough and was hard to clean. works for thinner dough (5-6mm) holes in the ears for easier removal of dough cut out (dough still sticks between…
peppa pig from the cartoon. Category: Creatures
Appa whistle, generates a high pitch noise.
This is a Lantern with swappable panels inspired by the Japanese Garden theme. The panels can be swapped for many themes : Disney, Valentines Day, Christmas, Halloween, Easter, Thanksgiving, etc. Making this a year long ever changing…
MMU remix using Prusa Slicer paint feature
Here at Vestibular First, we are excited to share our knowledge and passion for the anatomy that makes up the vestibular system! Combining this knowledge with technology is at the heart of our company. There are only a limited amount of…
This is the core 2x2 modular dungeon tile from my Masterful Dungeon tiles system. Each tile features a reusable base and a swappable top. The tile is designed for either magnets (5x2 mm neodymium) or clip connectors. Use it to build…
This is a dice rolling tower I designed for our D&D games. The idea was to have a somewhat simple tower, with different trays and decorations you can use to make it look the way you like. It's kind of a work in progress. I'll be uploading…
Clean, minimal clip designed to improve the look of exposed electrical conduit. Simple, robust and easy to print. ✔ Clean design for visible installations ✔ Reliable grip ✔ No supports needed Standard sizes (16mm, 20mm) included.…
Don't you hate it when you take off your snap case and you've nowhere to put it while you're gaming? Fret not - this screen protector allows you to store it on the back of the device while in use. You'll never lose it, and it still…
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
This screen protector was redesigned from the ground up to fit the Miyoo Mini Plus (and the original mini), with the goal of making it even more practical with the following new features: A cutout for a mini jack so you can keep in your…
Peppa Pig Cookie Cutter Uploaded newer design and split parts Category: Kitchen & Dining
Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. For more cookie cutters visit my profile .
Make decorating the tree a joy for your little ones with Peppa Pig! The design includes a convenient loop for easy hanging. Encourage creativity as the kids can color this model using sharpies. Happy holidays!
I have created a grip which is exact (scaled a few milimeters up) shape of Game Boy Color
Designed for single nozzle multicolor printing by changing the filament in the correct layers.
The official description of this item, as per WotC, indicates that 2 medium creatures can fit inside at the same time, and that this item is considered large. This seems impossible. It is now well over the "large" footprint, but looks…
Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. For more cookie cutters visit my profile .
A set of number tiles (and the letters A, B, C and D) for generating a house number plaque from 1 to 4 digits long (e.g. 846B). A 1, 2, 3 and 4 tile plaque is included, so choose the right plaque for the length of your house number and…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. I also re-created the insert model in openscad to easily customize it with a SVG (easy to do, look in the zip file).…
Description This is a lantern model with interchangeable side panels featuring various Christmas motifs. The lantern is made exclusively for LED tealights. Do not use regular tealights! The project is very simple and consists of the main…
ESP32 Case with Snappable Lid This case is designed to hold an ESP32 board as well as a standard female barrel plug to screw-terminal adapter. There is some room for additional wiring inside as well as an opening for connectors / cables.…
Speaker pod with a 40 degree mounting angle at various heights and axis angles. The pod was designed to fit the Infinity Kappa 1in tweeter and 3 inch Kappa mid. If you don't want to use the supplied Infinity grills you can print the…
These tags simply snap onto the aluminum corner posts of the Milwaukee Packout Bins. Print with PETG for best results. I have redesigned the original version so that they do not require any gluing/ds taping, they are much easier to…
2 versions of a cap for toothpaste. a nice fitting slip on cap. threaded cap Category: Bathroom
Hello, I made Momo and Appa keychains I've made them using lithophane sight named 3DP rocks then I cut the model placed the background, and printed it. In order to print it in two colors you can have either a multicolor printer or a…
This is a remix of a great looking model of Appa from Avatar the Last Airbender by Alpha3dPrint . The original file wasn't able to print so I had to repair it in meshmixer prior to printing and I figured while I'm at it, let's make Appa…
I made this design which is inspired by the flippable case for the regular Miyoo Mini found here: https://www.printables.com/model/240152-miyoo-mini-minimal-flippable-screen-protector I wanted to make mine flippable as well, but due to…
After designing clippable bricks , I thought it would be awesome to have a storage box in similar format as well. Therefore, here it is! Fully customizable in size, compatible to clippable bricks (LEGO® compatible). Modify the 3 values of…
Swappable thermal wing for the Lukisegler rc-glider This wing is designed for the Lukisegler rc-glider ( https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider ) to give it better thermal gliding properties. You can…
this toothpaste cap has holes so that toothpaste squeezes through to put on toothbrush. u will have to remove a lil bit of supports up near the nostrils on the inside. i used a drillbit and wire to loosen it and pushed it back and out and…
A simple deck box, with room for 100 double sleeved cards, and magnetic latching. The key feature though is the quick swappable and customisable badges, allowing the deck boxes to be customised to the game or deck that you are playing.…
Hello! I designed this small ant nest with the ability to use it either standing up or laying down in mind. There are 2 entrances that use a screw-in system to easily connect to other things. It uses 3mm bolts at 20mm long. Or 19mm if not…
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
This model is compatible with the lego system.
Transform your ceramic creations with this Clay Roller System , designed to bring precision and versatility to your studio. Featuring interchangeable rollers with a range of basic yet essential patterns—rectangles, triangles, dots, waves,…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Peppa Pig - Stencil template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything…
This model is compatible with the lego system.
FLSUN SR ( Super Racer ) six swappable / interchangeable accessories SD card USB holder Tools holder Pliers holder Spatula holder Storage Box (with optional lid) Storage Box Large (with optional lid)
"EXPERIMENTAL" extended magazine for the Chiappa M1-22. I modeled the magazine after the Seymour type III mags. (excluding the holes on the body) I don't really know what the holes were for on the carbine mags. I'm guessing drainage for…
Peppa Pig in a box This is one of my ‘in a box’ series. Perfect as a gift. Smallest piece is 1cm squared so please don't let young children put it near their mouths. The pieces inside the box can be clicked together to create an ornament.…
This is a drop in replacement for the front end of the Rival Pilot. To install, put a 16x1.5mm o-ring (or any 1.5mm thick o-ring that fits) in the o-ring groove on the outside of the tube portion. Put this 3d-printed part inside the…
This has been a project I've been working on for almost a year now. I made these for my Model railway layout and wanted wagons I could make swappable tops for. these have been consistently updated throughout that time and have had…
Already Sliced and colored for Prusa and Bambu slicers
"Bringing divinity to life, one layer at a time. ✨ From the meditative grace of Lord Ayyappa to the youthful peace of Bala Murugan, our latest 3D prints are crafted with devotion and precision. 🕉 Perfect for your home mandir or a gift…
Introduction If you rely on the L-BOXX Mini system but need more flexibility than the standard fixed dividers allow, this is the upgrade you’ve been looking for. These modular bins transform your box into a fully customizable storage…
Je me suis basé sur le travail de 2be3dprinted pour le design. → https://www.printables.com/model/135861-shelf-support-bracket-honeycomb-hexagon Je voulais des supports légers pour fixer une étagère dans ma salle de bain SANS voir les vis…
This is a clean, swappable label for Dröna/kallax boxes (but should work for anything with a 4mm lip) Can be printed upright with no supports. Use the text feature in prusaslicer/bambu studio (and possibly others, I haven't checked). To…
This is the modular 2x1 dungeon tile from my Masterful Dungeon Tiles system. Like the 2x2 version, it features a reusable base and a swappable top , letting you easily switch between different surface designs without needing to reprint…
I liked the changes that @titleunknown_285431 made to the Pressly by @Wallnutts_278875 , but I didn't have a heat-set insert for the ¼" bolt and I didn't feel that a single slot for the punch tines would work well for my purposes. I also…
I've designed this to be simple and without the need for any support. If you print it with it's forward face on the buil
A simple painting handle plus caps in a handful of different variations. The handles and caps are the same thread as ‘normal’ plastic soda bottles, so you can use plastic screw caps on it (or use the giant caps on a normal bottle, I…
Made my wife a Yarn holder for her crochet projects. Printer: X1CC Filament: Bambu PLA-CF. Temp: Nozzle 210-240. Bed 50. Rafts: No. Supports: No. Brim: No. Resolution: 0,28mm. Infill: Adaptive Cubic - 50%.
Parametrizable Plug for low pressure hoses for a hurry. The rear part is to use one spanner, it rounds to millimeters, To print place it on top. For other sizes, just change the value of the parameter hoseDiameter in the spreadsheet for…
Neon sign fits with 6mm LED neon strip like this: https://aliexpress.ru/item/1005002966246445.html To build it you will also need 5.5 x 2.1mm socket and 12V 1A power adapter: https://www.aliexpress.us/item/2255799949989899.html…
This is a modern three-tier display stand designed for snacks, candies, desserts, or small decorative items. Each tier provides generous space while keeping a compact footprint, making it perfect for party tables, holidays, or everyday…
Replacement front sight for the Little Badger .22LR
Uppababy Vista Cup Holder. Now with enhanced stability! Fits snuggly on the frame. After testing the original model, I made some improvements to it. Printed in PETG, didn't test any other materials. Don't forget to enable supports!
Aftermarket magazine for the Chiappa M1-22 rifle. I printed this mag upright @ .100 micron layer height with supports (supports only needed for the retaining plate slot). I tried printing one at a .200 micron layer height and it does seem…
A remix of the mentioned model by Gurnarok to handle the UART adapter for Victrons VE.Directs by Duppa . Prints with supports for the holes. Small standard torx screws necessary. For more information see…
Our tub faucet, while quite expensive, was designed terribly. I decided to make an adapter to fix it and while I was at it made a number of modular spouts that provide different options for how the water comes out. The model comes with a…
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
Carbon filter adapter for Ikea UPPATVIND I'm using this cheap Ikea UPPATVIND air purifier in 3d printer enclosure. Air purifier lacks carbon filter, I have added adapter that I can use custom one. Tested filament: petg Parts (minimum):…
This model is compatible with the lego system.
Not important, basic settings, change filament in layer
Uppababy Minu v2 stroller cup holder I was looking at buying a cup holder for the stroller, and they were expensive. I designed this instead. Features Easy snap-on and removal to/from stroller Securely attaches Fits a variety of bottles,…
Elevate Your Home Bar with Customizable Tap Handles! Take your home bar or brewery setup to the next level with these Customizable 3D-Printed Beer Tap Handles ! Featuring swappable plates , these handles let you showcase your drinks in…
this is the first wagon pack that goes along with my Swapple top chassis. they all use the same items that allow them to be compatible with the chassis. these are simple plank-styled wagons, not heavily detailed. mainly meant to help fill…
Iwahiro's Apparently Impossible Cube is an example of a coordinate motion puzzle - all the pieces have to be moved into place at the same time. You can find the original at http://puzzlewillbeplayed.com/444/IwahiroAIC/1/ Instructions…
Rather than buy a whole new cup holder just for the clip, I designed a replacement . I printed it with PLA in the same orientation as the STL file (otherwise I think the post and/or arms could shear off too easily) with generated supports…
Cup holder that can mount on the stroller using the accessory mount by BuckBuckPrint . The insert is optional. I printed the cup holder upside down, to avoid support material around the accessory mount interface. The insert provides a…
Anschlagwinkel für die Führungsschiene der Scheppach Tauchhandkreissäge. Anschlag 90° oder 45°, mit M6 Schraube und Mutter Fixierbar. Gedruckt auf einem FLSUN V400 ABS 255°/100° Infill 15% Gyroid Stützstrucktur aktiv
This model is optimized to use heat set inserts and also removes the unnecessary screw in the middle of the cassettes. This only includes models for the filter cassettes, for the rest of models needed for this project check out the…
For the Baseus Adaman Powerbank (PPADM65 20,000mah) v1.1 fixes some double geometry that was present in the original model. Slightly increased tolerances, which should make it grip the Steamdeck and the Powerbank better. Inspired by…
