Optimus Prime
Optimus Prime from the Transformers.
Print approx. €15.46–€18.90 excl. taxPreliminary estimate for one variant
- Downloads
- 651
- Likes
- 103
- Rating
- 0
904 models
Optimus Prime from the Transformers.
Print approx. €15.46–€18.90 excl. taxPreliminary estimate for one variant
spent primer catcher with side pipe for garden hose / tube with 12mm inner diameter. just klick in place. tube direct to a bucket or use adapter and drill a hole in water bottle cap for easy dispensing. modded the catcher and made also a…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Replacement fastener for RCBS Primer Catcher fastener. If you reload your own bullets, and have an RCBS reloading press with a primer catcher, but have broken or lost the little crecent-shaped fastener piece that holds it in place,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Couldn't find any mounting brackets for the Brennenstuhl Primera-Line 10 socket powerstrip so I made a really simple one in fusion. Works better than I expected and holds really well to the underside of my desk.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This is a little kit I assembled for filling multiple Prime-all Percussion caps with a little more ease. it includes a percussion cap holder that locks caps into place, a funnel, and a tamper for the prime-all. As always, there might be a…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Angelito para primera comunión
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
A Handle where you can stick any model on with a little bit of Blu-Tak to Spray paint or color them. I really liked the idea of the original model, but I would like to swap the Bar on top for more useability, so I added magnet holes. If…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant
G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…
Thsi is a simple little Transformers Optimus Prime figure that prints best with a resin 3d-printer. Enjoy! Juri
BUILD GUIDE INTRO Remember your promise in a most rootin' tootin' fashion 🤠 Presenting Sidetrack, a break-action hammer-prime revolver! Heavily remixed from the Hammerhead by Leedle Dynamics, the Sidetrack achieves higher performance and…
I have thickened the shell and smoothed it where possible. Not sure if it will be wearable due to some of the cavities inside. Print instructions Category: 3D Printing
Reloading primer flip/flipping trays. The flip tray comes in three sizes: 50, 100 and 125mm (2", 4" and 5"). For reloading with standard primers the 100 mm tray is great (common used size), but reloading with Federal, the larger 125mm…
.stl files versions of Sanford Prime's balisongs.
See Original : https://www.thingiverse.com/search?q=foldable+karambit&type=things&sort=relevant Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: KCamel PLA Black…
Parts to make your very own prime soul if you would like to sell these please ask first and credit me if you print the parts on runners you will not use the base forearms head or chest once made
It's been a while since I've made a new lucky 13 skin, hope this one makes up for the wait. The windows and Headlights will need to be glued in place. To transform Optimus into the truck, first remove his head and hands then fold the arms…
Bobble the head of your favorite leader of the heroic Autobots! I wasn't able to find the source for the head model I used for this bobblehead. I found similar ones, but not this exact one. If you find it, please let me know. All I did…
so this is a folding karambit, credit to Biobernhard (thingiverse creator). i found this model online and re edited it to be able to be printed in separate colours, only requiring a little super glue to keep them together. ill try to find…
Watch the video here to see more: https://youtu.be/0I8MF-BJLxw I'm so excited to be able to finally share this project with you guys. This is my version of the 80s Optimus! We printed it huge and multi material so it just printed in the…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
This is a remix to use 9 mm garden hose with this spent primer catch. These hoses have a 15 mm outside diameter which fit snug into the device. It is necessary to shave off a bit inside the hose to prevent that spent primers get stuck…
Another awesome file from the 3DwWarehouse https://3dwarehouse.sketchup.com/model.html?id=ce1dfb89588026f361cb2d2c3eadbdc1 Some of these files still have issues and will need some work to bring it together to print. I have done all I can…
UPDATED TO V2 APRIL 2025 This is a remix / conversion kit of Toymakr3D's G1 Optimus to look more like TF: Devastation Optimus. Permission was granted by the creator. The 2025 V2 update has been significantly rehauled and improved over the…
V2: Original listing is kept here for posterity. Remix of Toymakr3D's G1 Optimus to look a bit more like TF: Devastation Optimus (Permission granted). A majority of the files have been updated. Original file:…
Test para revisar primeras capas. Imprimir con altura de capa 0.2mm. Se podrá ver la calidad de la primera capa en una superficie de 120mm*120mm Se podrá observar la calidad en 5 Puntos repartidos en las esquinas y centro con una altura…
I recommend to use PETG or hard TPU so the claws are flexible and won't break.
This is a transformable Optimus Prime figure that prints in one piece. No assembly required! It stands over five inches tall and has a trailer when in truck mode (subspace storage not included). No support material is required to print.…
this is a copy of a transformers toy blaster. designed off of the actual part. Best printed with an SLA/DLP printer or other high resolution 3d printer. Check out my profile for many other weapon props from different sci-fi universes!…
This is an extended collar for the Dillon 550 primer cup to keep spent primers from ending up on the floor. Tested on a 550c press but should work for all 550 series presses. There is enough clearance so the primer chute does not rub on…
Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…
There were some problems with this Optimus Prime model, I made it solid and thickened all features to at least 1 mm with MeshMixer. So it all should be fixed now! It will still be a challenge to print this but the mesh is now solid and…
Both small and large Dillon Primer pickup tubes: Small Primer tube = .183 ID x 5/16" OD Large Primer tube = .215 ID x 5/16" OD Note: Does not include the end fittings. Print instructions These are in 6" lengths, so use the 30mm long…
I had multiple requests for this file, so here it is! This is the full model of Mesa Prime. My other upload has the file clipped into smaller pieces for easy printing and gluing. This model is not in a good scale or format or printing…
This is the Prime Krambit pulled from the Valorant game files and optimized to they are actually printable, Enjoy. -WARNING: NONE OF THE FILES ARE SCALED CORRECTLY Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
Lucky 13 Optimus Prime head If you like it --> press like it :-) Optimus Prime head as a remix for the funny lucky 13 figure. The original is from Roman . Take a look at my models, there you can find some more equipment for lucky 13.…
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary. I designed this version so the pick-up end of the tube would just…
Colored version for the P1P with a 4 color ams. Added a second model into the file just because its only about an hours extra print time and you get 2 then.
Optimus Prime basado en el famoso dummy 13!!! Todas las piezas se pueden imprimir sin AMS, pero el pecho y la cintura tienen pequeños detalles que sin AMS no se puede. Las ruedas estan hechas con TPU. Y esta todo pensado en escala 110%.
The Asus PRIME X670-P requires a special mounting bracket to vertically mount a WiFi card. While the manual states "The M.2 Wi-Fi module and vertical M.2 Key E bracket set are purchased separately.", it can (currently) not be purchased.…
Ripped straight from the fallout 4 game files. 200k triangles 600k vertices
A printable small and rifle or pistol primer. These are good for safe firearm function testing, they allow the gun to be dry fired against the plastic primer. After snipping these apart, I used a Lee hand primer to load these into my 9MM…
THY CLOGGED NOZZLE IS NOW! Minos Prime, the white dude with the hollow black face from the indie shooter game everyone loves. Credit to Arsi Patala (Hakita), New Blood Interactive and everyone else behind Ultrakill.
About Any owner of the RCBS Rockchucker IV knows it's a great reloading press for making high precision ammo, but the primer catch is horrible. This improved primer catch is optimized to catch every primer and leave extra room where you…
Hello!! Here we have Prime Boiiiiiis, simple print and perfect for single colour printers, not everyone has a Bambu lab printer so this has the parts separate to allow for the multi colour effect, the “prime bottle mainbody” has its own…
Prusa i3 MK3S MMU2 Prusament PLA Azure Blue Prusament PLA Galaxy Silver Prusament PLA Prusa Galaxy Black Prusament PLA Lipstick Red Original model by Garrett Kearney / ChaosCoreTech https://www.thingiverse.com/thing:2818858
Jealous of the diffused-looking light from the new Apex Neptune Sky? I am. Want to get that T5/halide look from your AI Prime? I do. I made this light hood for AI Prime HD to get rid of most of the “disco ball” effect that is common in…
This is one of the blasters from the Transformers Power of the Primes series. Best printed on an SLA/DLP printer for highest resolution. Check out all of my transformers guns! Transformers CW sunstreaker gunsword -…
This design was inspired by this Print-in-Place counter: https://www.printables.com/model/211634-print-in-place-3-digit-counter . I made a remix of that counter to add number viewing window or “shield” as I call it but felt there was some…
A knife, I recommend printing the blade upright. I RECOMMEND PRINTING AT 70-80% SCALE AS IT MAY BE TOO BIG! PLS COMMENT WHAT I CAN UPGRADE AND UPLOAD MAKES!
This expands the front center console cup holders to accommodate a 32 or 40-oz hydroflask in a Toyota RAV4 Prime. It may work with other RAV4's as well. Please use it at your own risk, as I take no responsibility if it causes any damage…
The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…
This is a model of Liberty Prime from Fallout 4. I took the model from the game, edited, split and repaired it for better printability. Most parts have a big surface on which you can put them, so you won't need raft. There are two…
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
Below will progress through in this order: left vertical line front horizontal line right vertical line back horizontal line if the print is within 10 of all 4 sides it doesn't do a prime line
I wanted a cool Prime Radiant prop that would simply print in one piece. I went through multiple iterations before arriving at this model. I had to simplify it to give it a chance of being able to print without support, which would be…
I made startup Gcode without 2nd prime wipe line, but im improve and move it to front and make possible better cleaning, specially after flow test when nozzle little bit leaks out filament. I tested its for x1c with ams, but i guess also…
This is 100% GMVB's design from another site, full credit to him. I just wanted a copy in a place that doesn't force feed you ads as well as a backup in case it disappears from there (as I have seen with other designs). Original is…
This is part based on https://www.thingiverse.com/thing:2809150 but redesigned from scratch for better fit and for 3D Printers (no aluminium required). Use PETG or better. You should use spring and ball or screw with rounded head as a…
Un topper para pastel de primera comunión. Hecho con PLA Teal de Polymaker. Impreso en Prusa Mini.
My dad always told me you don't #### where you eat. Different principle, but probably best to not do it where you clean also. I have a little bin where my nozzle is cleaned by a brush at the back of my 2.4 350 enclosure. This bin works…
This is a human-sized version of Optimus Prime's G1 Ion Blaster, the model has been broken down into many pieces that can be easily printed and put together, however, you may want to work a bit with the orientation. Total number of parts…
Remixed from: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson & https://www.thingiverse.com/thing:3834046 If you would like to support my work or have access to ALL of my files you can consider joining my…
Español: Modelo STL para verificar nivelación de cama de impresión de varios tamaños. Inglés: Multiple size STL model to check print bed leveling.
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
Hello! This is a remix of different model Optimus Prime for my little son, but with significant modifications. I wanted to give the model mobility. The original looked like a statue! )) Therefore, I decided to use clips made of Flex…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Octopus Prime, the brave leader of the Octo-bots... Print Settings Rafts: No Supports: No
Please do check out Sanford Prime 's original model here . They put a whole lot of work into this so if you havent tried it yet I personally suggest it!!! T I P S Print this at 100 percent infil Floats/Skirts or supports are optional but…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
A recreation of the golden prime bottle that you could win. Don't melt this one.
I liked the look of the StarSaber and didn't want to buy one, So here we go.
I found a ''Generation 1'' Optimus Prime model and made it 3D printable. It had multiple shells and some errors. The feet are still not level so don't know if it will stand, I oriented it and scaled it. If you print it please upload some…
I shortened the shade hood for the AI Prime HD Light created by @fellowapeman_221869
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
A case for the gunprimer raser origin glass file. Can use any material The top case friction fits onto the top. Designed with 0.2mm layers in mind. Print both models with the openings facing upwards.
This is the beginning of what will be a prop replicating the Prime Radiant from the Foundation series based on Isaac Asimov's novels. Also known as a cuboctahedron it is a polyhedron composed of 6 square and 8 triangles and one of 13…
This is a remix of BigMrTong's original CCI sized dispenser at https://www.thingiverse.com/thing:2939986 I added text to the front for quick reference to the primerHave used these on my reloading bench for several years and just love…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to create a Transformers Optimus…
Original external prime bucket is made to be held in place by spoolholders. These prints ads magnets to snap to the right side panel. This version is NOT Prusa original extended bucket but with magnet. It have different dimensions, as I…
Faire attention en retirant les supports sur les parties fragiles. Voici TriceraChou , le dinosaure le plus attendrissant de la préhistoire ! Avec ses cornes toutes rondes, sa collerette stylée et ses petites pattes trapues, il fait…
A two part case for the Gunprimer Raser + Glass file. The lid is designed to pop on and lock by friction fit. Designed with 0.2 mm layer height in mind. Print in whatever material.
Follow Sanford Prime 's directions for this print If you like this check out my weighted/balanced flipping variant of this model here!! In the photos: Left: Smooth Sides Middle: Extended Diamond Sides Right: Sanford Prime's Trainer…
There are other Rock Chucker primer guides, but mine uses 5x3mm magnets. I also include the F360 file so you can tune and adjust this as necessary. Since different Rock Chuckers have a different length slot in the ram, I provide both a…
This is an optimus prime head based off of g1 and the war for cybertron trilogy. I would use pla for this, but probably anything would work. You should use supports but its gonna be a mess cleaning up the eyes area so be careful.
Karambit Prime Valorant in a single print
Hanger for the primer follower on the Dillon RL1100. I assume this will fit other models but I haven't tested it. The inside diameter of the clamp is 14.2 mm. Let me know if you have any feedback. Filament: eSUN PLA
A little bucket designed to hold small priming pellets made during the Print_Start macro. There are 2 versions of it, one that simply bolts to the front of the frame, and the other is held in place by 2 6mmx3mm magnets to allow for easy…
Embody the courage of the Autobot leader with this 3D printable STL model of the Optimus Prime Helmet. This iconic piece is perfect for fans looking to add a powerful symbol of leadership and heroism to their collection or display. Usage…
not 100% accurate but close enough for me, fits a normal 24 in circumference head. visor is split in one of the versions, but its not too clean as meshmixer didn't like it. Category: Props
One piece anti sag bracket for the Asus 50 series Prime cards, Tested with the 5080 prime, but should work with the 5070 and 5070 ti prime cards as they all have the same dimensions. Just needs 3 x M3 countersunk screws, two to secure the…
Paracord snatch block for light-duty jobs up to 25 lbs. This pulley can achieve a 1:2 mechanical advantage when assembled as a block and tackle . The bottom half of this pulley is called a becket and provides a strong fixed mounting point…
Simple snap cap design inspired by Dboyds. I had some trouble with sizing and also made a slight modification. I am proposing the use of this snap cap in connection with an established firearms course related to my employment. With my…
Hey James, rushed this one a we bit, but I think it came out pretty good. Do check the sizing suits your needs and post some picks if you do take the challenge on ; ) Cheers Jace
Organizer pro 14 HUBů Lego Spike Essential Tryska: 0,4 Výška vrstvy: 0,2 Perimetry: 3 Výplň:25 Typ výplně: Gyroid Podpory: dá se i bez, ale není špatné dát stromové podpěry na střed úchytky. Materiál: PETG
Bracket and shroud to attach 2x 120mm fans on an Asus Prime RX 9070 XT GPU. Designed to be used with heated inserts, however STEP files are included so you can customize these to your own needs. It might fit on non XT 9070, however it…