30 models
MMU3 Spoolholder Stilts, four heights are provided: 10, 20, 30 and 40 mm. Created for the injection molded Spool holder - R4. Optional increased height in case a bend of the PTFE tube is too sharp. This can be the case for your setup if…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
Ultra-customisable and engineered to win. All of these parts follow the rules: there is no metal and, the weapon discs are under 91mm . Parts are press-fit, but I suggest using glue. Depending on the quality of your 3D Printer, the…
I got inspired to organize my electronic parts in test tubes, but wanted a better cover for them, that would eventually allow for labeling/customization. The caps provided are for a 13mm tube, 16mm tube, and the 16mm with test mmu label.…
I didn't like the fact that a large opening is on the top. Temperature would escape, and debrees of the filament cutter could fall into the build chamber, that's why I designed this cover. Use Structural settings, fast settings would lead…
UPDATE 13.1.2022: added bigger version, no support needed, better hook stability When: when you have metal board with squared holes when you want to hang on it any of your prints especially when your print has its back side printed as…
Intro: The Easy Linear Stage is a an open sourced fully printable linear stage. The design leverages a fully printed lead-screw and nut which makes it very cheap and easy to produce. This design is fully open sourced and more updated…
PoRo cleaned up the file and made it a step file and let me post it here. The source was from this thingiverse post: https://www.thingiverse.com/thing:5441255 Recommended Material: TPU 95A
Intro The Easy Rotary Stage is a an open sourced fully printable rotary stage. The design leverages a fully printed cycloid gear and worm screw combo making is really cheap and easy to produce. This design is fully open sourced and more…
I needed a 5.5 mm bit to disassemble my IBM model M keyboard. It is not a very common size and usually you do not get in sets. I'm providing the FreeCAD file so that you can customize it for you needs. Open the file, tweak the parameters…
Hello Everyone! Here i present my 2 colour Christmas name tags for your christmas tree! Download the Fusion file and edit the text layer with your name and export as STL or OBJ! Step by Step Image Provided if you are a new Fusion 360…
For me it's easier to resource 624 type bearings as I have them on stock. Additionally I prefer to have a more defined position of the bearing and a washer between the bearing and the door body, to enable free spin. since M4 is used, a…
This is a shelf using 350mm 2020 aluminum extrusions (2) as the bridge between the parts. I used M4x8 screws and appropriate 't-nuts' from a set that you could use M3 or M5 with also. I got the extrusions on Amazon (about $13 US for 4) as…
Added STEP files of what I modified and Solidworks files for people that have it.
Holds laminated signs, with a space to place your logo. The STEP file is provided for easy logo placement. Hope you like it, and Happy Printing :)
The beautiful Orleans Big Box released in the U.S. by Capstone games has a very nice insert. Unfortunately, the area for the cards doesn't fit sleeved cards. As a result, I cut out the card holder portion of the insert and replaced that…
A Gridfinity holder for the Pliers, two wenches, screwdriver, and Allen key that was provided by Prusa with the Core One L.
These lift containers of a flat surface. Intended to be used in wet areas to prevent water being trapped and creating dirty rings that can be hard to clean. Included are pre generated options as well as the OpenSCAD script if you want to…
The video really needs to be seen to do this justice. The way this works is pretty difficult to describe by words. Essentially, a wedge is created under a minor amount of pressure between the top-rear corner, and the front-lower ridge…
Two sizes of cute skulls with women's bow. The model is printed with PLA using PETG supports, but you can use also supports from PLA. The bigger skull have hole 5,6mm (0,22in) The smaller skull have hole 3.5mm (0,13in) Specs: Supports are…
I liked the original model, but needed it to fit my monitor. Included the fusion 360 file where you can put your screen thickness in and generate the stand to fit. I've included the 17mm version which fits my screen. On my print I use 1mm…
Model purpose: to exhaust the printer and dissipate heat for the cabinet Applicable fan: length, width: 12cm height: 23.5cm-35cm Inlet/outlet outer diameter 78mm, suitable for 80mm telescopic tube (PVC tube/aluminum foil tube) Except for…
A printable clamp for my Easy Stage projects but that can also just be used as a nifty stand alone clamp. You can optionally add springs to the clamp to make it nicer to use. You tighten it with the M3 bolt in the middle and can add…
This hook latches onto the top panel of a fridge door without affecting the seal of the fridge, so the sizing may be different for your model of fridge! The critical dimensions are: 51.3mm gap between the two “legs” of the fridge, and…
Printed in PETG, with enough walls to make it solid. IMPROVED MODEL HERE: https://www.printables.com/model/1781367-pocket-key-clip-v2
I installed four solar panels on my roof. The cables had to enter beween the roof ridge and the top roof tile. Our roof is covered with "Taunus Dachstein" and I needed a specific cable entry for nine 6mm² solar cables in total. [4 Panel,…
This is a really simple bracket you can use with any of my printed stages (see my profile). It allows you to bolt them down to a surface and only needs 2 M3 bolts to be secured to any side of any of the stages. You can find designs and…
As the name suggests, Will highly suggest you add anti vibtration and slip pads below. There is plenty of tolerance too. Infill 40% and higher perimeters 4 maybe with 0.3 layer height
This project has been sponsored by JLCCNC. I suggest ordering the part titled “Handle ring” from metal, however that is not a necessity for you to recreate the project. Using a strong material is recommended. Bill of Materials: 8mm shaft…
Printed in PETG, with enough walls to make it solid. IMPROVED MODEL HERE: https://www.printables.com/model/1781367-pocket-key-clip-v2
For turning on 5v led lights, usb fans, or any usb appliance wirelessly No USB-A or USB-C current limiting protocol* - suggested for multiple long LED strings, or for high current lighting applications in general Wireless switch, can be…
