Search results: prusabox

Sort order

110 models

P
Printableswilsondg

PrusaBox Enclosure - Buck Converter box with WAGO holders, RJ45 Network Port, Enlarged Rocker Switch Opening

Note: Please see my remix https://www.prusaprinters.org/prints/155787-prusabox-enclosure-enlarged-buck-converter-box-wit for an enlarged version of this same design to more easily fit all the wires with the relay in the lid. This is a…

Print approx. €5.30–€6.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
30
Rating
5
P
Printablesmgen

Microsoft WebCam mount for the PrusaBox

Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
0
Rating
0
P
PrintablesWindy

PRUSABOX Heatbed back cables cover - right side outlet

I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…

Downloads
970
Likes
88
Rating
4.96
P
Printablesscorf

PrusaBox Front Door 270 degree Hinge

This is a direct replacement/redesign of the stock PrusaBox hinge that allows the front door to swing open 270 degrees. I needed the door of my PrusaBox to swing open fully so I redesigned their stock hinge to allow this and made minor…

Downloads
198
Likes
41
Rating
5
P
PrintablesPrinter Box

MMU2 / MMU3 Autorewind spool holder with Spool tank and Prusabox

This set up is made to use MMU2 or MMU3 on top of an enclosure, using a filament enclosure. With autorewind system made with printed springs, you don't need any buffer ! Features: Compatible with Prusa MMU2 and MMU3 System Auto-rewind…

Downloads
174
Likes
55
Rating
5
P
Printableswilsondg

PrusaBox Enclosure - Adapter Plate to Center Modular Control Panel with Box Temp Addition

This is a 2 part adaptor plate than can be screwed to the modular control panels, and then this adapter plate along with the modular control panel is screwed to the Prusa Box so that the control panel is centered on the front of the Prusa…

Downloads
147
Likes
44
Rating
4.8
P
Printableswilsondg

PrusaBox Enclosure - Enlarged Buck Converter box with WAGO holders, RJ45 Network Port, Enlarged Rocker Switch Opening

This is an enlarged version of https://www.prusaprinters.org/prints/152385-prusabox-enclosure-buck-converter-box-with-wago-ho. When I put all the wires into the original design with the relay and all the GPIO wires, the box was very…

Downloads
104
Likes
18
Rating
5
P
PrintablesPosix

PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)"

This is the hinged version of my design PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…

Downloads
104
Likes
19
Rating
5
P
PrintablesJanos Kehl

PrusaBox – Recycle your empty spool cardboard

Check out the latest variant right here → “ Prusa.Box ” Inspired by the awesome “Mailing Tube Cap” by Repkord, I want to design more boxes to use the empty cardboard parts from prusament spools. Hope you like it. I will do even more…

Downloads
104
Likes
36
Rating
5
P
PrintablesColin

PrusaBox Enclosure 4 Way Relay Holder in Cover Lid of Buck Converter Raspberry Pi

This is simply a modified lid of the buck converter housing in the Prusa Box enclosure, allows a 4 way relay board to slide in. Obviously some board sizes may vary, but most are of a generic size. Hopefully the photo also helps. I use…

Downloads
95
Likes
22
Rating
0
P
PrintablesPatrick G.

Höhenverstellbare Füße PrusaBox

Eigenschaften| Höhenverstellbar| Klemmung| Stellbereich ca. 15mm| Kompatibel mit dem Stahlplattenhalter unterhalb des Gehäuses (https://www.printables.com/de/model/78667-prusa-box-enclosure-expandable-steel-sheet-holder)| Benötigtes…

Downloads
95
Likes
10
Rating
0
P
PrintablesColin

PrusaBox w1219 Temperature Control Housing

Redesign of the modular front for the w1219 temperature controller housing, with switch for Raspberry Pi and longer internal groove for the w1219 circuit board. Orientate with the main face, face down on the bed. No supports needed. Print…

Downloads
92
Likes
13
Rating
5
P
Printableswilsondg

PrusaBox Enclosure - Horizontal Mount for Logitech C920 Camera

This is a changed design to my original vertical mount for a Logitech C920 which allows mounting the camera without removing the factory mount from the camera. The original mount was vertical which works ok, but it can vibrate a bit when…

Downloads
83
Likes
18
Rating
4.8
P
PrintablesColin

PWM Control Module for PrusaBox Modular Front

PWM board housing to be used with Prusa Box modular front, allows proportional fan control. Print with buttons face down. You may need to add support to the end with the vent holes - specifically the long 2mm high ridge where the end of…

Downloads
82
Likes
12
Rating
0
P
PrintablesRafaël Abadier

E3D Nozzle holder for PrusaBox

This is a combination of the original PrusaBox scrap bin and the E3D Nozzle holder from Paul_GD. All credits should go to the people who designed the separate files. I only combined them together. PrusaBox: https://www.printer-box.com/…

Downloads
81
Likes
13
Rating
5
P
Printablesnozzleshift.com

Bottom magnetic cable duct for PrusaBox by Printer box

The standard cable duct of the PrusaBox has two significant disadvantages. First, the click system can damage the isolation or break cables when squeezed (yes, it did happen to me) and second, it doesn't offer enough space in complex…

Downloads
76
Likes
16
Rating
5
P
PrintablesAstupidmoose

mfLinkrail 90 degree Prusabox

Love what Bera had designed, but I didn't love my position for the camera. I wanted as far back as possible to get as much of the build plate as possible, but the orientation of the first clip made that impossible. This remix takes Bera's…

Downloads
74
Likes
9
Rating
5
P
PrintablesPosix

PrusaBox Spinning Gyroscope X-axis

Remixed the remixed remix of another remix ;) PrusaBox version, for the enclosure made by printer-box, with negative volume to create little cuts on the outer circle, so that it does not hit the plexiglass of the enclosure. If you have…

Downloads
71
Likes
13
Rating
5
P
PrintablesPosix

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"

I also designed a hinged version PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…

Downloads
70
Likes
10
Rating
5
P
PrintablesBera

mfLinkrail Prusabox

i made this adapter to mount it on the rail for a raspberry camera https://www.printer-box.com/prusa-enclosure-webcam/

Downloads
64
Likes
10
Rating
5
P
PrintablesTom

MK4 LCD Front Modular Control Panel for PrusaBox by Printer-Box Remix

When i integrated my new MK4 Printer into the Prusa-Box by Printer-Box i realized, that my xLCD won't fit into the Front of the Modular Control Panel from Printer-Box. The Mounting Holes wouldn't align, the USB Connector had not enough…

Downloads
62
Likes
19
Rating
0
P
Printableswilsondg

PrusaBox Enclosure 4 Way Relay Holder in Cover Lid Modified to be held with two screws

This model is a variation of Collin Hill's lid design to hold a 4 way relay under the lid. When I printed his design, my board was just a bit too wide to fit in the slots, so I modified the design so that on the right side, the relay…

Downloads
61
Likes
13
Rating
0
P
Printableswilsondg

PrusaBox Enclosure - Mount for Logitech C920 Camera

This print is designed to allow mounting a Logitech C920 to the PrusaBox rail, without having to take off the mount that comes supplied with the camera. The original mount just slides into a square housing to hold the camera. The housing…

Downloads
60
Likes
14
Rating
0
P
Printableswilsondg

PrusaBox Enclosure - Enlarged Buck Converter box with WAGO holders, RJ45 Network Port, USB Port for RPI 4 Charging

This is a remix of https://www.printables.com/model/155787-prusabox-enclosure-enlarged-buck-converter-box-wit. The changes made were to add a square hole at the back of the case to allow using an external charger for the Raspberry Pi. I…

Downloads
57
Likes
15
Rating
5
P
Printablesnozzleshift.com

Top Fan Enclosure with HEPA & Carbon-Filter for PrusaBox by PrinterBox

It's a common recommendation leaving the top window (or all doors) open while printing PLA. I don't think that's a good idea. Because PLA also scatters microplastics. Even if it may not be bioreactive, I don't want to have it in my lungs.…

Downloads
56
Likes
26
Rating
0
P
Printablesnozzleshift.com

Corner Cover for PrusaBox by PrinterBox (bottom rear left)

This is a quick and dirty designed cover for the rear left corner of the PrusaBox to hide the cables. It is designed to use with my magnetic cable duct (see here…

Downloads
54
Likes
12
Rating
0
P
PrintablesDerek

Top Mounted Prusabox for Elegoo Neptune3 Pro

The only change to this model compared to the original is the lower part of the box. You can use/print the cap, upper half, and tray from the original design.

Downloads
54
Likes
8
Rating
0
P
Printablesnozzleshift.com

Einsy Dust Grid / Mesh for PrusaBox by PrinterBox

This a replacement for the original ventilation grid to protect the Einsy motherboard from dust. You can install it even if you have the original grid installed to the inside or outside. You don't have to remove the original grid. Because…

Downloads
52
Likes
3
Rating
0
P
Printableswilsondg

PrusaBox Modular Panel Two Switch Coupler Modifed for large rocker switches

This is a modified coupler for the modular control panel. The switch hole mount size is 19mm x 12.6mm to allow for larger rocker style switch. The holes were designed to fit these rocker switches. https://www.amazon.ca/gp/product/B07Y1GDRQG

Downloads
47
Likes
11
Rating
0

Buddy 3D Camera Rail And Corner Mount - For Printer Box's Prusabox

I saw that Prusa had released the Buddy 3D camera and jumped on the opportunity! My current camera was acting up and this seemed like a wonderful solution. I have a Prusabox from Printer Box (wonderful company makes great enclosures) set…

Downloads
46
Likes
6
Rating
0
P
Printablesnozzleshift.com

Cable Cover / Integrated Rail for PrusaBox by PrinterBox

Cable cover with integrated rail and magnets of course. Now you can mount whatever you want and you can change the vertical position in a blink of an eye. Instructions Print with supports ( Important! Take a look at .gcode ). I recommend…

Downloads
46
Likes
9
Rating
4
P
Printablesnozzleshift.com

Left Magnetic Corner Cover PrusaBox by Printer Box (top-rear-left)

Corner cover (top rear left) to hide the cables going to the LED lights and the fan for the PrusaBox. Before After Print with rim and 15% infill. You should't need support, if you keep your fan blowing a 100% from layer 3 or so. See…

Downloads
45
Likes
11
Rating
5
P
PrintablesCobrettj

PRUSABOX CONTROL BOARD BOX MMU3

NEW ENCLOSURE FOR MMU3 CONTROL BOARD COMPATIBLE MMU2 FOR PRUSABOX, HIGHER TO CONTAIN THE NEW ADDED BOARD, REDUCER MOTOR CABLE MOVED UPWARDS I ENTIRELY REBUILT THE OLD CONTAINER TO CONTAIN THE ADDITIONAL BOARD AND PUT A PASSAGE FOR THE…

Downloads
44
Likes
8
Rating
1
P
PrintablesPat_S

Remix - PRUSABOX NEW COVER FOR MMU3 CONTROL BOARD COMPATIBLE WITH MMU2

I wanted this nice cover, but with better access to the buttons, hence this remix. If you want more protected buttons, please check out Cobrettj and use this model . Happy printing! If you like the thing leave a like or post a make. I'm…

Downloads
43
Likes
5
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox Airsystem mit oder ohne HEPA-Carbon - Filter

Druck: Prusa MK4 PETG Düse 0.4 Schicht 0.2 ______________________________________________________________________________________________________ MONTAGE: “Version mit Rolle”…

Downloads
42
Likes
9
Rating
0
P
PrintablesRobinson

RaspiCam V3 Wide mount case XZ left Prusa i3 MK3S+ or PrusaBox Printer-Box

2024-01-19: Ajout d'une version de la face arrière avec fixation pour le rail des boîtiers de Printer-Box . (absent des photos) Pour la version Wide (grand angle) du RaspiCam V3, je n'ai pas testé avec la version normale (je crois que…

Downloads
41
Likes
4
Rating
0
P
PrintablesFrederic

PRUSABOX guide filament

Modification du guide PTFE pour le filament dans le caisson PRUSA BOX

Downloads
41
Likes
3
Rating
0
P
PrintablesBruceDemski

PrusaBox (V1) Front Channel Covers

After having my PrusaBox for a few days, I realized bits of filament like to get into the channel. They are made for the stock feet on the printer, and are only 1mm thick. When i get some time, I may redesign to make in 2 pieces to go…

Downloads
40
Likes
7
Rating
0
P
PrintablesDaniel Vitanza

Left/Right Door Frame for MK3 Prusabox

1. Introduction As an owner of an MK3 Prusabox, I think that the new design of the MK4 left/right doors is a very good design and upgrade compared to the previous system of locking. It gives a more robust way to close the door and also…

Downloads
40
Likes
7
Rating
5
P
PrintablesPrinter Box

MK4 display on PrusaBox

This model is used to set your Mk4 Prusa display on the PrusaBox, with only two printed parts. Hardware 15x M3x6 screws 15x M3 square nuts Print instructions Print settings: PETG Support : no Brim/raft : no Fill : 20% or more Assembly…

Downloads
38
Likes
10
Rating
5
P
PrintablesJuanfra

PrusaBox Einsy + RPi Zero fan

When you are printing with your PrusaBox is important to maintain cool your einsy and RPi, at the beginning I was using the cooling duct designed by @colin but when I mounted the RPI It was not able to fix in the correct place, so I have…

Downloads
37
Likes
5
Rating
5
P
PrintablesRegis

PrusaBox - Squash Ball Feet for Bear Upgrade

We couldn’t fix the downloadable feet on the Printer - Box site on the back of the Bear frame so I modified them so I could mount them. There were 2 screws to fix each foot on the frame, on the new version there is only one screw per…

Downloads
36
Likes
11
Rating
0
P
PrintablesWindy

PRUSABOX multiholder 1 and 2kg spools

The multiholder can be used as 5 spools holder either 5 1kg spools or 1pc 2kg and 4pc of 1kg spools or, can be modified (by printing a few diferent parts) to hold 2 kg spools and 3 5kg spools and yet it still fits the roof of Prusa box…

Downloads
36
Likes
4
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox Lüfter zu Elektronikbox

Beschreibung gedruckt Prusa MK4 IS PETG Düse 0.4 mm Schicht 0.2 mm STRUCTURAL (weitere Einstellungen nach Bedarf) 1 Bodenplatte 1 Deckel 1 Lüfter 45x45x10 (Sunon ME45101V1-000U-A99) 4 Zylinderkopfschrauben mit Innensechskant M3x8 4…

Downloads
36
Likes
5
Rating
0
P
PrintablesPatricePichery

PiCam PrusaBox MK4

PiCam case, and two arms for top or bottom PiCam Boitier caméra PiCam avec 2 bras de fixation au rail nappe haut ou bas J'ai repris le fichier de PrusaBox du rail et de la fixation. J'ai dessiné deux bras et le boitier pour y mettre la…

Downloads
36
Likes
5
Rating
0
P
PrintablesColin

Prusabox Modular Front Baseplate for 30mm Fan

Redesigned base plate panel to fit 30mm fan for Prusa Box modular front. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: any PETG Category: 3D Printer Accessories

Downloads
36
Likes
7
Rating
0
P
PrintablesColin

Temperature Control Housing for SHT20 - 3D Enclosures - PrusaBox

Temperature Controller Bezel for Temperature Control Unit SHT20 From Ebay See video for more details https://youtu.be/zsTEjOPljjs This is a temp controller from Ebay (UK/US) designed to fit into Prusabox, but can fit into any other 3D…

Downloads
35
Likes
10
Rating
0
P
Printablesjon

Prusabox MMU MMU2S upgrade top windows (Printerbox)

A colleague need this windows to mount his MMU2S on his prusabox, I made these models using my acrylic windows as a sample. Made left version with and without window for MMU2S data/power cables, the version with window cant be removed…

Downloads
33
Likes
11
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox Lüfter zu Netzteil

gedruckt Prusa MK4 PETG Düse 0.4 mm Schicht 0.2 mm Quality (weitere Einstellungen nach Bedarf) 1 Bodenplatte 1 Deckel 2 Haltewinkel 3 Lüfter 60x60x10 (TITAN 12 V TFD-6010L 12Z) 2 WAGO 221 Klemme (siehe Bild) 12 Zylinderkopfschrauben mit…

Downloads
33
Likes
6
Rating
0
P
Printablesnozzleshift.com

Corner Cover for PrusaBox by PrinterBox Small Version/cables (bottom rear right)

A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes with holes for cables. You need two 8 x 4 magnets. It looks like this on the left side: It is designed to use with my magnetic cable duct (see…

Downloads
32
Likes
7
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox - MK4S Motherboard cooling für Drucker mit Elastomerdämpfern

Luftkanal - 3 Modelle 2 Versionen (alter und neuer Printer frame) ohne Lüfter mit Lüfter 40mm mit Anbaulüfter 45mm Air duct - 3 models 2 versions (old and new printer frame) without fan with fan 40mm with attached fan 45mm…

Downloads
31
Likes
6
Rating
0
P
PrintablesAnthem212

PrusaBox, PrinterBox, Aktivkohlefilter / CarbonFilter, ActiveCoalFilter, Airfilter, Filter

UPDATE 02.03.2023 Da mir langweilig war habe ich den Luftdurchsatz verbessert indem ich oben noch einen 80mm “Pull”-Lüfter angebracht habe. Die Konstruktion ist etwas komplexer geworden da bei mir auf der Prusabox noch die Filamentboxen…

Downloads
31
Likes
5
Rating
3
P
PrintablesTom

Prusabox by Printer-Box Adjustable Hinges for MK4 Box

The Doors on my Prusabox MK4 won't align correctly because of too big Tolerances in the printed parts. The Front Doors were at slightly different height in the Middle and the side Doors were too low in the front area. I added longholes…

Downloads
30
Likes
9
Rating
0
P
PrintablesChuck B

PrusaBox Enclosure - Adapter Plate to Center Modular Control Panel with PWM Fan Control.

I updated this to work with a 5inch monitor and Colin Hill's “Prusa Box PWM Temperature & Fan Proportional Speed Control For Modular Front 3D Printer Enclosure”. Before you could not get to all of the screws (Quick_top_remove mod) to…

Downloads
29
Likes
4
Rating
0
P
PrintablesChuck B

Mk4 Prusabox Einsy board cooling.

Added nut holders for fan mount increased fan mount depth Enlarged current nut holders for easy nut insertion. Also included other need parts (not modified) so you do not have to search for th

Downloads
29
Likes
1
Rating
0
P
Printablesnozzleshift.com

Front Right Bottom Magnetic Cable Duct for PrusaBox by Printer box

This an additional cable duct for the right side ( front ) of the PrusaBox if you have cables running here. You will need: Four 8x4 or 8x3 magnets (fix them with superglue, if necessary) Print with support. See picture: You can find the…

Downloads
28
Likes
8
Rating
0
P
PrintablesAnthem212

PrusaBox-AirExhaust-external

In my case i have not much room behind the printer and most of the air exhaust were to big - so i designed one by myself. Comes greate with the 80mm-Fan on the inside from the official moddingoptions of the PrusaBox. You can screw them…

Downloads
28
Likes
4
Rating
0
P
PrintablesChuck B

PrusaBox Enclosure - Enlarged Buck Converter box with WAGO holders, RJ45 Network Port, USB C, Small switch

Remix of wilsondg's remix, changed amount of keystone inserts, one RG6 pass thru and one USB C pass thru, put small switch back. I am going to use the PI 4B and will run it with the USB C factory power supply plugged in the back. Later I…

Downloads
28
Likes
6
Rating
0
P
PrintablesJhollandb

PrusaBox Enclosure 4 Way Relay Holder in Cover Lid (Updated for Wago base)

This model is a variation of Collin Hill's lid design to hold a 4-way relay under the lid. Updated the model to the new version that goes with the Wago Connector. Included the STEP file for adjustments. I used the Elegoo 4-way relay. A…

Downloads
28
Likes
5
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox - Remix MK4 Motherboard cooling für Drucker mit Elastomerdämpfern

Habe Bauteil [Printer-Box] Prusabox 19_mk4_motherboard_cooling_tube_bottom_v1 neu in 2 Versionen aufgebaut. kompatibel mit Anbaulüfter ohne interne Lüfterhalterung gedruckt (ohne Stützmaterial) mit Prusa MK4 Filament Prusament PETG Düse…

Downloads
28
Likes
9
Rating
0
P
PrintablesPosix

PrusaBox universal PCB mounting

This is a mod made to mount a 6 relay, 4 relay or 2 relay board in the prusa box by printer-box. This is a universal mounting system that allows you to mount any board from lengths 9mm to 105mm. Original file name…

Downloads
27
Likes
8
Rating
0
P
Printablesnozzleshift.com

Rear Right Bottom Magnetic Cable Duct (Long version) for PrusaBox by Printer box

This an additional cable duct for the right side (rear) of the PrusaBox if you have cables running here. You will need: Five 8x4 or 8x3 magnets (fix them with superglue, if necessary) Print with support. See picture: This cable duct is…

Downloads
26
Likes
6
Rating
0
P
PrintablesUSpaeker

Thermometer-Halter für PrusaBox

Thermometer-Halter für PrusaBox zur stabilen und festen Montage. Ich habe folgendes Thermometer genutzt:…

Downloads
26
Likes
2
Rating
0
P
PrintablesChuck B

PrusaBox Enclosure - Updated Enlarged Buck Converter box with 4 WAGO holders, RJ45 Network Port, USB C, Small switch V4

Updated to have more room for power supply wires. Moved WAGOs around made channel for usb and RJ45 cable to exit. Opened up lid for more room for power supply wire exit.

Downloads
26
Likes
3
Rating
0
P
PrintablesJim Nangano

C920 Prusabox mount.

I needed to upgrade from by C270 to the C920 webcam for my prusabox. There was one by @wilsondg_201245 but I couldn't get a good angle looking down. So I created a new design where I can have more tilt on the z axis. To keep the camera…

Downloads
26
Likes
6
Rating
0
P
PrintablesJim Nangano

Prusabox W1219 modular panel with fan control and light control.

I redesigned this W1219 panel for the Prusabox. I absolutely hate sunken letters and filling them with color makes them look even worse. Even worse, the panel buttons were in the wrong place! I fixed the button alignment and also put in…

Downloads
26
Likes
4
Rating
4
P
Printablesnozzleshift.com

Rear Right Bottom Magnetic Cable Duct (short version) for PrusaBox by Printer box

This an additional cable duct for the right side (short version) of the PrusaBox, which I needed, because I have a second raspberry on the outside of the Prusa Box and a lot of cables from my fire suppression system going in. Important!…

Downloads
25
Likes
4
Rating
0
P
PrintablesChuck B

PrusaBox Enclosure - Updated Enlarged Buck Converter box with 4 WAGO holders, RJ45 Network Port, USB C, Small switch

Added another WAGO holder, so now two 5 connector and two 3 connector. I hooked up 12V and 5 V pos and neg from buck converter for easy power hookup. Also included the lid (…

Downloads
25
Likes
4
Rating
0
P
PrintablesRegis

PrusaBox 1 - Front Door 270 degree Hinge

I wanted to be able to open the doors of my new PrusaBox 1 at 270°.

Downloads
24
Likes
9
Rating
5
P
Printablesnozzleshift.com

Top Fan for PrusaBox by PrinterBox

For this design, I disassembled an AC Infinity T8 and created a top exhaust for the PrusaBox out of its parts. It is essentially based on my first design. If you don't have an AC Infinity T8 or don't want to spent 120 bucks on one just to…

Downloads
24
Likes
15
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox - modifizierte rechte Frontplatte (2 Drehzahlregler)

Gedruckt mit Prusa MK4 PETG / Düse 0.4 mm Schicht 0.2 mm (Quality) Niederspannung Dc Pwm Motor Drehzahlregler Modul 1.8V 3V-5V-6V 12V 2A 1803BK Material zur Montage der Modifikation 1 Zylinderkopfschraube mit Innensechskant M 3x8 8…

Downloads
24
Likes
7
Rating
5
P
PrintablesKyle Falconer

Prusabox W1219 modular panel with fan control and light control - remix for cleaner printing

A remix of the redesigned W1219 Modular panel for the Prusabox for light and fan control

Downloads
24
Likes
5
Rating
5
P
PrintablesDaniel

PrusaBox Modular Front Temp Box - DC12V Digital Display

Been looking for the W1219 Temperature Control but delivery time was too long so decided to try another one, so this is my redesign of the modular front housing for the DC12V Digital Temperature controller to fit. Here is the link:…

Downloads
23
Likes
3
Rating
0
P
Printablesjussi

PrusaBox Roomba HEPA filter gasket

Printed this Roomba filter adapter for Prusa Box HEPA filter from Chuck B: Prusa Box Roomba Hepa Filter w/ tabs and bottom edge by Chuck B | Download free STL model | Printables.com and noticed that at least with the latest Printer Box…

Downloads
23
Likes
6
Rating
4
P
Printablesnozzleshift.com

Corner Cover for PrusaBox by PrinterBox Small Version/No cables (bottom rear right)

A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes without holes for cables. You need two 8 x 4 magnets. It is designed to use with my magnetic cable duct (see here…

Downloads
22
Likes
5
Rating
0
P
Printablesmdailous

PrusaBox - Low Profile Scooped Exhaust

Love how little space @Anthem's PrusaBox-AirExhaust-external takes but wanted something that would “encourage” the hot air to go up, not straight out the back or possibly down toward the floor. I decided to use the model from…

Downloads
21
Likes
3
Rating
5
P
Printablespipersw

WaveShare 5" DSI for PrusaBox, with X735 PSU shield

This is an option to mount the WaveShare 5" DSI Display and a PI4 with a X735 shield ( https://geekworm.com/products/raspberry-pi-x735-safe-shutdown-auto-cooling-expansion-board ) onto the Prusa-Box from https://www.printer-box.com . Add…

Downloads
20
Likes
7
Rating
0
P
PrintablesDaniel Vitanza

Prusabox modular front for Aliexpress 5" DSI IPS touchscreen

1. Introduction Prusabox proposes a modular front to install a Waveshare 5" display on your enclosure. However, Waveshare screens tends to be quite expensive sometimes and difficult to find. Very similar touchscreens can be found on…

Downloads
20
Likes
1
Rating
0
P
PrintablesRegis

MMU3 Cover For PrusaBox - Printer Box

The cover of the mmu3 was missing on the PrusaBox, so I modeled 2 versions.

Downloads
20
Likes
6
Rating
0
P
PrintablesSander

BME 280 holder for PrusaBox / Printerbox

Small sensor holder for PrusaBox / Printerbox

Downloads
20
Likes
5
Rating
0
P
PrintablesRegis

PrusaBox 2 - Front Door 270 degree Hinge

I wanted to be able to open the doors of my new PrusaBox 2 at 270°.

Downloads
19
Likes
9
Rating
5
P
PrintablesChuck B

Modular_panel_prusabox-PWM-control-side v22 with hole fix

I like easy, so I fixed the top hole so no drilling to make screw go in easy. I would recommend you also get this: https://www.printables.com/model/353401-prusabox-enclosure-adapter-plate-to-center-modular I fixed it to work with the…

Downloads
19
Likes
2
Rating
0
P
PrintablesS2021
Downloads
18
Likes
3
Rating
0
P
PrintablesEngMike

Remix of Prusabox Expandable Steel Sheet Holder and centering plate

I was looking for a way to use the expandable sheet holder and still use the modular control panel centering plate. I remixed the bottom control panel covers to relocate the mounting holes so the brackets from the expandable sheet holder…

Downloads
18
Likes
1
Rating
0
P
PrintablesCore Light

Prusabox strong feet MK4

Pour la Prusabox MK4, avec les pieds anti vibration d'origine de la MK4, les supports s'emboitent dans les rail avec un ajustement serré, et une rainure permettant une plus grande liberté de positionnement. Remplissage 60%,

Downloads
18
Likes
3
Rating
0
P
PrintablesRavi

PrusaBox C920 holder

A compact mount for Logitech C920 webcam. You will need a 1/4-20 UNC screw (tripod mount screw) to mount on this holder. The holder uses two screw holes in the front left steel pillar. Added 3 photos of what the C920 sees when mounted.…

Downloads
17
Likes
4
Rating
5
P
PrintablesChuck B

PrusaBox Vert cable man top cover V2

Shortened top to fix a lot better, enlarged cable hole so more cables will fit (fan, leds ...etc).

Downloads
17
Likes
0
Rating
0
P
PrintablesAdeta

Prusabox hydro meter holder

Holder for a humidity meter that mounts directly to the box. No need for the webcam rail. It bolts directly to one of the hinges. Simply replace the 6mm bolt with a 12mm bolt and it should fit nicely. Link to the meter I used

Downloads
17
Likes
2
Rating
0
P
PrintablesRegis

Adapter For Raising The Spool Tank On PrusaBox - Printer Box

I had to put my spool tank higher in order to open the door because the ptfe tubes bothered.

Downloads
17
Likes
5
Rating
5
P
PrintablesRegis

Remote power button on the front of control panel - Prusabox

When the machines are close to each other, it is not easy to reach the power button, that’s why I decided to deport it on the front of my boxes.

Downloads
16
Likes
2
Rating
0
P
PrintablesMichael

PrusaBox w1219 Temperature Control Housing Cover

Cover for the Temerature Control in https://www.prusaprinters.org/de/prints/75281-prusabox-w1219-temperature-control-housing

Downloads
16
Likes
1
Rating
0
P
PrintablesRegis

PrusaBox - Troubleshooting assistance

Thanks again to Dajosco for his work and sharing ;)

Downloads
16
Likes
4
Rating
0
P
PrintablesPhobos

100MM/4 Inch Exhuast for PrusaBox

I wanted to add a venting system for my PrusaBox to help vent toxic fumes. I took the 80mm model that PrusaBox provides and made it fit 100mm/4inch diameter ducting, like the one I bought: AC Infinity Flexible 4-Inch Aluminum Ducting I…

Downloads
16
Likes
1
Rating
0
P
PrintablesPrinter Box

Screwdriver transformer mount for Prusabox

It is easy to mount and use the same screw as the inside spool holder of the Prusabox

Downloads
15
Likes
8
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox - kugelgelagerte Filamentzufuhr

Beschreibung Selber verwende ich diese Konstruktion zusammen mit einem SUNLU S2 Filadryer. Dabei wird das Filament ausschliesslich von oben abgewickelt. Ob und wie das zusammen mit anderen Rollenhaltern funktioniert kann ich nicht…

Downloads
15
Likes
4
Rating
0
P
Printablesburunduk3

Flat prusabox

Implementation of a box made of an old paper core from a spool of Prusament. This variant makes it just a couple of millimeters higher that the core itself. The top and bottom part are modeled after prusament flanges, therefore have a…

Downloads
14
Likes
0
Rating
0
P
PrintablesMadVirus

2 Filament Guides for Prusabox by Printer Box

I did not like the clunky 2 part design. Scratched on my Acrylic glas on opening and closing. Also the gap between frame and acrylic glas made the glas bend. So i mixed the original Files 14B_For_PB_filament_chimney_base.3mf and…

Downloads
13
Likes
2
Rating
0
P
PrintablesRegis

Inside Spool Holder +10 mm - PrusaBox

I could not use c ertaines filament coils, as they were too wide

Downloads
13
Likes
2
Rating
0
P
PrintablesStorm

[PrusaBox] Bottom plates for modular panel with centering adapter plate and Expandable Steel Sheet Holder

These bottom plates are required when the Modular Control Panel by PrinterBox is used in combination with following mods: PrusaBox w1219 Temperature Control Housing by Colin PrusaBox Enclosure - Adapter Plate to Center Modular Control…

Downloads
13
Likes
1
Rating
0