Search results: pw

Sort order

807 models

P
PrintablesJFKonstruiert

Topwater Stickbait Pencilbait 7cm / 3''

I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…

Downloads
308
Likes
45
Rating
0
P
Printablestomer_amir

Oathsworn: Into the Deepwood - Playerboard - Cut in two for Prusa MINI

Same as the excellent model by @PeterPain_98465 that can be found here , only cut into two parts for printing on smaller printers like a Prusa MINI

Downloads
118
Likes
8
Rating
0
P
Printablesd0b

osVAC M32 Parkside PWD 30 B1 (based on osVACneo) Warning Male Adapter

Just an osVAC M32 Parkside PWD 30 B1 Adapter :-) based on osVACneo Fusion360 files. Printet with suppport on bed only.

Downloads
90
Likes
14
Rating
0
P
PrintablesDokkie

DC PWM motor controller case lid

Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…

Downloads
87
Likes
12
Rating
5
P
PrintablesDan Rogers

Shipwreck Benchy for your Fish Tank with bubbler

Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…

Downloads
80
Likes
38
Rating
0
P
PrintablesErez Ardel

Waterproof 10 - 60A PWM Solar Charge Controller wall mount

Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…

Downloads
76
Likes
5
Rating
0
P
PrintablesMetalRa1n

Pwnagotchi Slim (Slimagotchi) + waveshare + ups lite

Original model requires shorter spacers for the ups lite battery pack. In my pwnagotchi I am unable to install the shorter spacers as it causes the pi board to press on the battery and is very dangerous. There is heat etc. and the battery…

Downloads
76
Likes
9
Rating
0
P
PrintablesVictor

Tesla Model 3 SR+ brackets to mount Alpine PWE-S8 subwoofer

Brackets to mount an Alpine PWE-S8 powered subwoofer in the trunk of a Tesla Model 3 SR+ where the factory subwoofer is located in other trim levels. I mounted the subwoofer to point into the rear fender cavity ("corner loading"). Others…

Downloads
57
Likes
5
Rating
0
P
PrintablesNeybao

PWM powered Moiré Illusion - Corsair Titan Capswap (Cover is a GIF)

This is a corsair AIO cap with a Moiré Illusion. powered by the PWM meant for pc case fans, meaning you can control the speed just like a pc fan in your bios, your motherboard's software or with iCUE. I made this for the Corsair Titan AIO…

Downloads
39
Likes
7
Rating
0
P
PrintablesArgiraras

Shipwrights of the North Sea and Runesaga insert

An insert for Shipwrights of the North Sea and runesaga just because there is space in the box. Fits sleeved cards

Downloads
27
Likes
3
Rating
0
P
Printablessthone

Topwater Fishing Lure

There's something to be said for the excitement of topwater fishing....this my version of a 3D printed topwater minnow lure. Assembles just like my Crankbait Fishing Lure . I tested these out and they swim pretty well and have lots of…

Downloads
7,919
Likes
987
Rating
4.67
P
PrintablesRepkord

RepWinder v2.14

A RepBox compatible or standalone rewinder system for Prusa MMU2 & REPLACE THE BUFFER BOX! ;) >> Non-Printable Hardware Kits Available Here >> Assembly Video Here UPDATED 2/5/22 RackStands for RepBox v2.3.1+ and RepRack are now AVAILABLE…

Downloads
2,485
Likes
700
Rating
4.48
P
PrintablesArmand

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…

Downloads
2,348
Likes
1,583
Rating
4.91
P
PrintablesYa Ikou!

Pwn-In-Place Pwnagotchi Case

19 Mar 25 - Added a new looped version that's much sturdier than previous models. Also changed the latch so the hinge was coaxial to the fillet. Overall, a more refined model than any of the previous iterations. 8 May 24 - Added beefy…

Downloads
1,862
Likes
100
Rating
4
P
PrintablesJousty_xx

Bosch L-Boxx / lboxx Adapter für Lidl Parkside Performance Werkstatt Staubsauger PPWD 30 A1/A2

This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…

Downloads
1,477
Likes
119
Rating
5
P
PrintablesRepkord

RackStand / RepWinder Stand for RepBox 2.3.1+ and RepRack System

RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…

Downloads
1,117
Likes
241
Rating
4.78
P
PrintablesEngGraph

Fat Jerkbait - wobbler topwater

Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…

Downloads
1,069
Likes
216
Rating
4.5
P
PrintablesPeter Pain

Oathsworn: Into the Deepwood - Playerboard V2

This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…

Downloads
896
Likes
55
Rating
4.83
P
PrintablesNairod

6025 NF-A6x25 5V PWM Noctua Fan Holder for Control Board for Bambu Lab X1 X1C P1P

6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)

Downloads
863
Likes
278
Rating
4.85

Guybrush Threepwood - Monkey Island

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Guybrush Ulysses Threepwood is the main character of the Monkey Island series of computer…

Downloads
787
Likes
154
Rating
5
P
PrintablesPantsManUK

Pwnagotchi Case

This is a remix of "Waveshare display (v1/v2) with a PiSugar 1200mAh battery and a carabiner loop" to support the PiSugar2 1200mAh (switched USB charging port/button, and added a slot for the power switch). I made the case and lid a…

Downloads
761
Likes
47
Rating
5
P

Deepwoken Curved Blade of Winds

just print and ur done

Downloads
694
Likes
3
Rating
0
P
PrintablesBrownie86

The Riptide (Topwater Popper Fishing Lure) Limited Time!

This popper requires some weights. You can use split shots but I recommend using a ¼" slingshot ammo or a ¼" ball bearing. This is a very detailed topwater popper which should be printed mouth down with some custom supports for the most…

Downloads
679
Likes
63
Rating
0
P
PrintablesFatmann Makes

Pwnagotchi case

Standard pwnagotchi case Build your own pwnagotchi!!! instructions here: https://youtu.be/Gw4yCRKLn3Y Checkout case overview video here: https://youtu.be/KD7heRy_vDg Checkout the how Pwnagotchi build series playlist on my channel page:…

Downloads
671
Likes
37
Rating
4.75
P
PrintablesSireInsectus

PCA9685 16 Channel PWM Servo Motor Drive IIC Interface Module 12-Bit

See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image

Downloads
595
Likes
11
Rating
0
P
PrintablesZenlayne

Sopwith Camel kit card - Famous Planes

Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Sopwith Camel This is another plane for your collection : the famous WW1 brittish…

Downloads
595
Likes
114
Rating
4.67

Slim Pwnagotchi case

My case for slim edition of Pwnagotchi.

Downloads
537
Likes
71
Rating
5
P
Printablesanalogicparadox

Corsair 12VHPWR Cable Comb (Slim)

Remix of Eduard3D's model. This version allows the cables to sit closer together. The hole diameter is the same, I just changed the spacing between them. This version is specifically made for the Corsair 12VHPWR cable, as it only features…

Downloads
529
Likes
57
Rating
5
P
PrintablesMrDrem

Pwnagotchi case for Waveshare and Pi Sugar v2

The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…

Downloads
504
Likes
33
Rating
3.75
P
PrintablesHassan Saleh

Topwater Walker 70mm

Required for assembly: 5 mm steel balls, you can also use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 4 mm eyes Super…

Downloads
476
Likes
47
Rating
5
P
Printablesexperify3d

PWNAGOTCHI Pisugar 3 - pi Zero 2 W - papwe 2.13" - 1300 mah

Features: USB C charging port 2 buttons (need tolerance check when printing) side hook perfect fit for the display perfect fit for the battery + the magnet mount to the Pisugar 3 the lid is a tight fit but it has 2 holes for easy removal…

Downloads
435
Likes
27
Rating
0

Wind Cannon: PWM Fan Housing for Wind Simulator

The Wind Cannon is an engineered 3D printable housing configured to hold 2 pulse width modulation (PWM) fans (120mm & 200mm fans). PWM fan output can be linked to PC simulation/game telemetry via an Arduino to create what is commonly…

Downloads
420
Likes
237
Rating
0
P
Printablestankflatter

Tiny Desktop Destroyman III (Deepwoken)

HINT: I should be rising in the sky…. First ever model, it's a little bit scuffed to print but I managed to get it out okay. Very small, but I think it's cuter that way. His teeth are tiny, and I probably should have made them bigger but…

Downloads
413
Likes
11
Rating
5
P
Printablescybernate2003

Snapware Lid holder

I was looking for a way to hang my snap ware lids, I came across the universal hanger for Ikea and similar sized lids however snap ware has a longer arm. after just a. few minutes in tinkercad I was able to make the adjustment necessary…

Downloads
397
Likes
42
Rating
5
P
PrintablesBeusekomse Baan

Deutsche Bundesbahn PWGHS 54 Güterzugbegleitwagen Gauge 1 / 1:32

This is my interpretation of a gauge 1 (1:32) Deutsche Bundesbahn PWGHS 54 Güterzugbegleitwagen. Best printed in PETG, with the outside of the walls facing up. 20SEP19: Uploaded improved STL's. Construction: Identical to my previous…

Downloads
385
Likes
29
Rating
0
P
PrintablesArchimedez

Case for Geekworm X306 UPS shield (18650 battery), RPi Zero W or Zero 2, & Waveshare E-ink Display - Pwnagotchi

I designed this case for the Geekworm X306 UPS shield. It provides constant power via a 18650 Li-Ion battery. You can plug and unplug the USB-C port on the back to charge the battery as needed, without interrupting the operation of the…

Downloads
384
Likes
26
Rating
0
P
Printablescaburum

PWM/Dupont Cable Clip

I printed with the open side up. This is a simplified version based on the REV part .

Downloads
378
Likes
21
Rating
5
P
PrintablesRAIDwerks

Pwnagotchi Case for rpi0w, waveshare, RTC and UPSlite

(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…

Downloads
371
Likes
23
Rating
4
P
PrintablesGeoff_B_UK

Servo motor and PWM controller LEGO connectors

Connectors with LEGO-compatible studs for mounting small (SG90) servo motors - plus a LEGO compatible ‘tile’ connector for a PCA9685 PWM controller. The connectors can be used: either to build simple test beds for developing control code…

Downloads
363
Likes
41
Rating
5
P
PrintablesToni H

FormD T1 2.1 - 120mm Noctua NF-A12x25 PWM Fan Duct

Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…

Downloads
356
Likes
34
Rating
0
P
PrintablesPixel-Pete

Parkside PPWD 30 A1 / B2 OSVac F32 Adapter

Für meinen Werkstattsauger Parkside PPWD 30 B2 (auch für PPWD 30 A1) habe ich einen OSVac Adapter F32 für den originalen Anschlussstutzen erstellt. Gedruckt mit Sovol SV06 (Düse: 0,6mm / Layerhöhe: 0,2)…

Downloads
355
Likes
40
Rating
0
P
PrintablesDavid

Toyota Cross Bar Key (PW301-02009), keycode 82

I needed a key for a Toyota roof cross bar lock, so I made one. The keycode is 82, as shown in the photo (the number on the lock). This key is for Toyota part number PW301-02009. Category: Automotive

Downloads
354
Likes
10
Rating
4.5
P
Printableszeroflow

ESP32 WiFi Fan Controller Case - 4-Channel PWM for Homelab & ESPHome

ESP32 WiFi Fan Controller - Free Case for Makers The board is the product. This case is a thank you to the 3D printing community - print it yourself instead of buying the Nylon-SLS version. 🛒 Get the board: Elecrow:…

Downloads
348
Likes
31
Rating
5
P
Printables3DCraft

Kraken Shipwreck Diorama

Massive octopus crushing a broken wooden boat, wrapped in dynamic tentacles with rich texture and dramatic composition.

Downloads
339
Likes
56
Rating
0
P
PrintablesDr Operator

Lucky 13 skin: Shipwreck

Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . You will need to download the Lucky 13 armature and skin found here https://www.printables.com/model/148367-lucky-13-printable-jointed-figure Although I…

Downloads
338
Likes
140
Rating
5
P
Printablesmikeymakesit

Pwnagotchi Case (wavesharev2 low profile, PiSugar 1200mah)

I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…

Downloads
336
Likes
15
Rating
5
P
PrintablesTerrain4Print

Shipwreck terrain

A piece of blocking shipwreck terrain. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and…

Downloads
330
Likes
89
Rating
5
P
Printablesnightfox90

Jeep Willys MB/Ford GPW 1:18 scale

Here is my Willys MB or Ford GPW 1:18 scale model. The Jeep was produced in 1941 by Willys-Overland for the War Department however by the end of 1941 it was apparent that Willys could not meet demand and Ford began making the GPW. I think…

Downloads
327
Likes
40
Rating
4
P
PrintablesSamotrel

PWM controler housing

This housing is made for a PWM controller 12V 2.0A (max), sold here: www.banggood.com/Low-Voltage-DC-1_8V-3V-5V-6V-12V-2A-Motor-Speed-Controller-PWM-1803B-p-961010.html Attachment using 2 screws or double sided tape. Assembly…

Downloads
325
Likes
59
Rating
5
P
PrintablesPepelope

Slim Pwnagotchi + UPS Lite Case

I created this case to encorporate the Waveshare V4 Epaper display, together with the UPS Lite V1.2/V1.3 and the Pi Zero or Zero 2w. The Dimensions of the case is WxDxH 75x25x36mm. It is smaller in all dimensions than a flipper zero with…

Downloads
322
Likes
36
Rating
5
P
PrintablesHeinzHeizer

140 mm Noctua inspired desk fan with built-in PWM controller

A compact desk fan using a Noctua 140 mm PWM fan, with the PWM speed controller integrated directly into the base. The design keeps the fan setup clean and cable clutter to a minimum while allowing convenient speed adjustment directly at…

Downloads
321
Likes
352
Rating
5
P
PrintablesTeuflor

Shimano Crank Spacer Y1PW98070 (M7100/M8100/M9100 Cranks)

sparepart spacer if you lost your Shimano crank spacers. nothing special

Downloads
316
Likes
21
Rating
0
P
PrintablesBeusekomse Baan

DB Pwg14 Güterzugbegleitwagen in Spoor 1/Spur 1/Gauge 1/ 1:32

DB Pwg14 Güterzugbegleitwagen in Spoor 1/Spur 1/Gauge 1/ 1:32 Work in progress ! All files are uploaded. An instruction manual and a B.O.M. will be provided soon.

Downloads
315
Likes
15
Rating
0

REFILL cívka PWS

REFILL cívka pro náhradní plnění PWS filamentů. Reusable REFILL spool for PWS filaments.

Downloads
311
Likes
16
Rating
3
P
PrintablesV0rT3x

Pwnagotchi case for Pimoroni Display Hat Mini and Pi Sugar v2

To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.

Downloads
303
Likes
18
Rating
0
P
PrintablesFrittenpit

Noctua NF-A20 PWM Fan Shroud

simple Fan Shroud for the NF-A20 with 170x170mm and 154x154mm hole spacing

Downloads
301
Likes
34
Rating
5
P
Printablesdjesionek

Festool Vacuum cleaner adapter male part for Parkside PPWD 30 hose

I slightly remixed the model from @MeisterEdel to fit the Parkside PPWD 30 hose. The Parkside hose can also be purchased as a replacement part from the Grizzly (original manufacturer) shop and is pretty nice also in comparison to the…

Downloads
285
Likes
41
Rating
5
P
PrintablesTomDoe

FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct

Remixed the O11 fan duct to fit in the FormD T1 together with my beloved Noctua NF-F12 PWM fans. It's a snug fit so that all of the air pressure is working to get the hot air out of the case instead of just circulating between the case…

Downloads
278
Likes
37
Rating
0
P
PrintablesMiaoucat

PWM module case 5 to 12v 10amp HW-070

very simple case for the HW-070 PWM module. pretty much it.

Downloads
277
Likes
20
Rating
5

Mechanical stopwatch

A mechanical stopwatch is a timer that counts time from 0 to 999. When the time reaches 999, it starts counting from zero and does not need to be rewound. The whole mechanism is powered by an 8g servo. The switch is already built into the…

Downloads
272
Likes
227
Rating
0
P
PrintablesFreycraft

Raspberry Pi 4b case with lid for 40mm PWM Fan (such as Noctua NF-A4x10 5V PWM)

Additional parts needed: Rasberry Pi 4b 40 mm PWM 4V Fan (such as Noctua NF-A4x10 5V PWM) 4x M4 countersunk screw (Normally supplied with the fan) Optional: 4x M3 nut and 4x M3x6 screw (To screw Raspberry pi securely into the case) Print…

Downloads
272
Likes
38
Rating
0
P
Printablesk1f0

Pwnagotchi Case Reinforced

Original: https://www.thingiverse.com/thing:3920904 Added slots for straps to carry it with a power bank attached and I also made the walls a bit thicker.

Downloads
269
Likes
20
Rating
5
P
PrintablesGM

Pwnagotchi case

Remix to use the waveshare 2.13inch E-Ink display HAT. Print in place, not supports are needed.

Downloads
255
Likes
19
Rating
4
P
Printablesmikelfellin

Snapware Lid Holders

No supports needed. I printed them in PLA.

Downloads
253
Likes
47
Rating
0
P
Printablespepa3205

Additional cooling DEYE 20kW - PWM added

Additional cooling for DEYE 20kW LP . I had to divide the model into several parts due to its size. It is a prototype without speed control for now, then a PWM controller from Aliexpress will be installed later (search for " EGBO DC12V 3A…

Downloads
252
Likes
14
Rating
5
P
PrintablesLetz3D

Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2"

Alternative Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2" You can find the Case and Buttons here: https://www.thingiverse.com/thing:4551538

Downloads
251
Likes
15
Rating
0
P
PrintablesDenna

PWM Fan Speed Control Module Case

Protective case for PWM Fan Speed Control module as it can be purchased by DONKGER on Amazon (and probably on other platforms too :) ) I provide the FreeCAD project file, in case you want to make changes to the design. Print Settings…

Downloads
247
Likes
23
Rating
5
P
Printablesdjedje_zr7

DeepWood Archers

No support / FDM friendly If you have springing reduce the temperature of the nozzle to the maximum (205°c for prusament PLA ) (approx. 28 mm scale)

Downloads
240
Likes
24
Rating
5
P
PrintablesPrintedForFun

Walksnail Goggle X shim with upwards tilt

Ideally printed in PLA and moulded to the casing (heating the part with a blow dryer before). Mirror part to suitable for both sides of the headset.

Downloads
240
Likes
14
Rating
0
P
PrintablesMat

Case for Pwnagotchi with UPS and Display

If you use a UPS-Lite and a Waveshare 2.13" e-Paper pHAT with your Pwnagotchi this is the case for you

Downloads
239
Likes
37
Rating
5
P
Printableshomelabd

Pwnagotchi Case PiSugarv2 Wavesharev4 RPi02w

This a remix of PantsManUK's remix. The original carabiner loop was a bit choppy when trying to send off to 3D Printing Services like PCBWay, so I fixed that. Also, the NEW_LID file is actually done by formlessform @formlessform_1988521…

Downloads
238
Likes
7
Rating
0
P
PrintablesPwnPiSky666

Pwnagotchi (snap fit)

Be careful, this case has tight tolerances! (Remove the SD card before putting your pwnagotchi in!) You will have to slightly flex the side where the micro usb ports are to make your pwnagotchi fit. If you have any issues or need help…

Downloads
232
Likes
17
Rating
5
P
Printablesmaremb08

Pwnagotchi Case

Here is a Pwnagotchi case i made. It's to hold a waveshare V3 + PiSugar 2 + raspberry zero 1.

Downloads
232
Likes
15
Rating
1
P
PrintablesZappodrom

osVAC(neo) Adapter for Parkside PWD 30A1 Vaccum

Here you can download an adapter for the Parkside PWD 30 A1 vacuum cleaner for the osVAC(neo) system. It is based on the model from @d0b_58654 and should therefore also fit the Parkside PWD 30 B1 (and maybe others). However, since it is…

Downloads
228
Likes
32
Rating
4
P
Printablesnerd_zentrale

Parkside PPWD 30 B2 osVAC

F32 Adapter for the included braided hose of the Parkside Performance extractor

Downloads
227
Likes
18
Rating
5
P
Printablesprint.me!

DC PWM motor controller case

smol case for the readily available pwm controller modules… (first make in the uploaded picture used old tolerances; cover should sit flush now) I recommend using a few drops of superglue to keep the cover on. for one of these…

Downloads
226
Likes
25
Rating
4.75
P
PrintablesMaia Beard

Cypher Trapwire/Coin

This was modeled entirely within Blender. As such, there isn't much of a sense of scale to go along with it. Scale it how you like in your slicer. It prints without supports perfectly! Make sure you print a second, can't watch flank…

Downloads
225
Likes
22
Rating
0
P
PrintablesVandirac

Sopwith Triplane

Sopwith Triplane fighter aircraft from World War I. Designed in Blender for use as a miniature for the BlueMax boardgame Printed on Anycubic Photon S. Licensed under CC-BY-SA-NC-ND. Print Settings Printer Brand: Anycubic Printer: Photon…

Downloads
211
Likes
23
Rating
0
P
Printablesnilson_fx

Stroopwafel Coaster

I found De3DPrintman's Stroopwafel design and created a coaster design out of it. I removed the slight overhangs, centered the pattern and scaled the coaster to a 100 mm diameter. Depending on the filament it looks quite realistic from…

Downloads
211
Likes
41
Rating
5
P
PrintablesDH

Zotac GTX 1060 3Gb Single fan to dual Noctua 92mm pwm fan adapter

I recently helped to build a PC. Friends graphics card of choice was affordable Zotac's GTX 1060 3GB single fan model. Due to construction/budgetary limits of graphics card it was loud while in high performance mode. We decided to add…

Downloads
211
Likes
20
Rating
0

Pwnagotchi case with 18650 and ext antenna

A super handy pwnagotchi - for your journeys in the city :D

Downloads
206
Likes
59
Rating
0
P
PrintablesDROUGA

GPU 12VHPWR Cable comb

Not all brands are made the same, and I designed this to fit a Be quiet cable. I took that version and scaled it up to 108% to fit the stock cable that comes with ASUS Loki PSU's . If you find that none of the versions I made, fit your…

Downloads
204
Likes
21
Rating
5
P
Printablesavipars

Pwnagotchi WaveShare v4 case - original version

Check out my newest Pwnagotchi case here This is a remix of the case for the pwnagotchi by soul_Stz. I adjusted the side of the case so that the WaveShare v4 can be inserted correctly with a Raspberry Pi Zero 2. I had the problem that the…

Downloads
204
Likes
10
Rating
5
P
PrintablesMZTutto3d

pwnagotchi case with protective cover

Pwnagotchi is an A2C-based “AI” powered by bettercap and running on a Raspberry Pi Zero W that learns from its surrounding WiFi environment site of full project: https://pwnagotchi.ai this is a pwnagotchi case with protective cover for…

Downloads
203
Likes
13
Rating
0
P
Printablesbiehler-josef

Parkside PPWD 30 A1 / B2 OSVac F32 Adapter

Wer, so wie ich, den Schlauch nicht von dem originalen Adapter lösen kann (ohne den Adapter kaputt zu machen), kann die beiden nutzen, um den Sauger mit einem osvac F32 Anschluss zu versorgen und den Schlauch ebenfalls. Ich habe die Teile…

Downloads
200
Likes
18
Rating
0
P
PrintablesErntekoenig

IKEA Skadis Holder for Parkside PWSA 12 B1 Angle Grinder

A sturdy holder for the Parkside Mini Grinder PWSA 12 B1 for the IKEA Skadis Pegboard. 4 universal hooks by CSD_Salzburg are used to mount. Easy print in PLA or PETG (hooks should be at least PETG). I printed with 0.24 resolution and 15 %…

Downloads
197
Likes
33
Rating
0
P
PrintablesKawu

Parkside PPWD 30 B2 to Dewalt DXVCS002 Adapter

Mit dem Adapter kann man den Schlauch des Dewalt DXVCS002 Vorabscheiders direkt in den Parkside PPWD 30 B2 stecken. Der Schlauch des Parkside PPWD 30 B2 Staubsaugers kann direkt ohne Adapter auf den Eingang des Dewalt Vorabscheiders…

Downloads
192
Likes
7
Rating
3
P
Printablescarmaris

Pwnagotchi + Waveshare UPS HAT (C) Case with MOLLE Strap Mount

This design is a case for a Pwnagotchi build using: Raspberry Pi Zero 2WH Waveshare UPC HAT (C) Waveshare V4 2.13" E-ink Display HAT a MOLLE Strap like this one 8x 2.5x3.5mm screws It is designed to fit a non-slim variant of Pwnagotchi…

Downloads
183
Likes
12
Rating
5
P
PrintablesAesculapius

Dewalt DPW611 Router Bushing Plate/Base

I picked up a set of Rockler router bushings which fit standard sized routers well. I also have a DPW611 compact rounter. Sadly, the plate that comes with that can't take bushings. The model is a simple circular plate that has matching…

Downloads
181
Likes
20
Rating
0
P
PrintablesPulp

Oathsworn: Into the Deepwood - Dicetray

Oathsworn: Into the Deepwood has a very nice tokentray, but a lot of space is wasted beneath. I created a dice storage tray that can hold all the dice used in the game plus an additional set of battle dice and fits below the space of the…

Downloads
177
Likes
20
Rating
4.8
P
PrintablesRoss

Dewalt DPW611 Trim Router Bushing Base Plate

Replacement base plate for the Dewalt DPW611 trim router that will accept standard 1-3/16" bushings. Model has been opened up to provide decent visibility and airflow. Same thickness and mounting holes as the original base plate. Slightly…

Downloads
176
Likes
24
Rating
5
P
PrintablesSkyF0V

12VHPWR Cable Combs for Seasonic PSUs

Was trying to find a cable comb for the 12VHPWR cable on my Seasonic power supply but didn't find anything. So, I made my own. This is sized for the default PSU cables. This is best suited for graphics cards that have the sideband pins on…

Downloads
171
Likes
10
Rating
0
P
PrintablesSaSke

Parkside PPWD 30 B2 Organizer

Drukowane z podporą normalną, przy mocowaniu możliwe delikatne podszlifowanie

Downloads
168
Likes
23
Rating
4.5
P
PrintablesBoomer

1/35 Armoder vehicle OA vz. 30 / Pz.Spw.30 (t)

Simple model of armored car OA model 30 / Pz. Spw.30 (t) in 1/35 scale. Possibility to print a whole or a few parts separately. Information https://en.wikipedia.org/wiki/OA_vz._30 The photo shows a prototype copy of the Prusa Mk3,…

Downloads
167
Likes
12
Rating
0
P
PrintablesSheehanDesigns

Mahi Topwater - Fishing Lure

SUPPORTS NEEDED LOW LAYER HEIGHT RECOMMENDED 100% INFILL RECOMMENDED MATERIALS NEEDED: 3D printed parts 18 Gauge Stainless-steel Wire Steel BBs Split Ring Kit Treble Hooks Snacks (Preferred, not needed) Super Glue Clear Finish HOW TO…

Downloads
167
Likes
41
Rating
0
P
PrintablesJohn Doe

Pwn-In-Place Pwnagotchi Case remixed

One of the best pwnagotchi case - edited to be openable in any program as I had similar problem mentioned in comments of original file. All credits to the original creator ! Thicc Dual Loop version (without letters) print as it is - in…

Downloads
166
Likes
5
Rating
5
P
PrintablesChoripansittu

Megalodaunt (DEEPWOKEN roblox)

preferably paint it like how it is in google photos and print in white 😅😅 convert it into your own 3d print software printed by me in a prusa i3 software i used ultimaker cura edit into your needs and credit deepwoken creators and aswell…

Downloads
166
Likes
5
Rating
0
P
PrintablesHPGlass

Bench roller for flameworking/lampworking

Bench rollers are invaluable tools for solid or hollow flameworking -- for quickly checking and centering your handles and work in progress. But as a newbie, I got frustrated at the $250+ price tag, so I designed these and immediately…

Downloads
165
Likes
22
Rating
5
P
PrintablesDanol

HP Reverb G2 upwards cable clip

2021-01-02: Added V2 with a larger ring for the cable – I was afraid the cable could get damaged by bending. Cable clip for HP Reverb G2, directing the cable upwards – useful for pulley systems TO BE USED TOGETHER WITH THE ORIGINAL SIDE…

Downloads
164
Likes
24
Rating
5
P
Printablesits_Blackpoint

Better Cup Holder for Dacia Sandero Stepway

I designed a Cup Holder to fit bigger Bottles and Shakers into the Middle Console of our Dacia Sandero. It fits perfectly into the existing Cup Holder in the middle Console. No Glue, Tape ect needed. I designed it so you can add a Rim on…

Downloads
163
Likes
27
Rating
0