Search results: qd

Sort order

137 models

P
PrintablesjonnieZG

M4 Flash Hider / Muzzle Brake (M4QD)

A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…

Downloads
745
Likes
84
Rating
5
P

Mount N Slot Sling QD Mount for Magpul MOE Buttstock

Using a mlok rail qd mount, some m4 bolts and nuts, you can now add a quick detachment point for your sling to your Magpul MOE stock. The 3d printed piece acts as a spacer and to increase surface area, the weight and the forces are…

Downloads
526
Likes
69
Rating
0
P
PrintablesEwokyBalboa

airsoft hpa hose qd molle mount

Simple 2-piece design. can hold your hpa line so you don't have to shove it in your pocket or a pouch (what I generally do). including 2 threaded “plugs” one that prints flat with threaded side on the bed, and one to print at 45 degrees…

Downloads
472
Likes
67
Rating
5
P
Printableswtxmetriod

Airsoft suppressor insert, Avengers QD Mock Suppressor

Designed to fit in the Avengers QD Mock suppressor that is modeled after a Knights Armament suppressor. I had some problems with the “.20 SPEED” preset, but “.20 STRUCTURAL” worked fine. Mock Suppressor:…

Downloads
306
Likes
26
Rating
0
P
Printableshandyrandyrc

QD cup for Sling Swivel - attach to rifle or other object

I know Magpul and many other companies make this type of part. This is a printable one. Drill a hole in the bottom of it and attach with a screw. Or drill a ½" hole (matches the o.d.), and glue/epoxy into place. I printed with ABS at 0.12…

Downloads
273
Likes
17
Rating
0
P
PrintablesKN16

MLOK QD Sling Swivel Mount

MLOK QD Sling Swivel Mount by DB Firearms. This utilizes QD Socket Heat Inserts by Hyperion 2A Print with PLA+ or better. CF Nylon would be the best for a long lasting piece. Though these have been known to withstand over 200lbs of force…

Downloads
240
Likes
32
Rating
5
P
PrintablesM1nt1x

QD-U02B Air Conditioner Remote holder

Remote holder for the universal QD-U02B Air Conditioner control board which is a cheap replacement for burnt AC electronics. It allows operation of the remote without removing it from the holder because you can slide its cap through the…

Downloads
205
Likes
16
Rating
5
P
PrintablesTabjo

Shotgun Shell Carrier Inserts for Aridus QDC

This is a collaborative effort between qwertyaardvark who designed the shell retention, and me who designed the form factor to fit into the Aridus QDC. We came up with this at a time when Aridus QDC inserts were hard to come by. I've…

Downloads
161
Likes
33
Rating
0
P
PrintablesAtlas47

Picatinny QD Sling Mount - 90 degree

Remixed haphazardly from BlasterCore's push button QD sling mount with microsoft 3d builder. (untested for now) Like BlasterCore's design: Uses a M3 X 35mm Socket Head Cap Screw and Nut Category: Sport & Outdoors

Downloads
142
Likes
12
Rating
0
P
PrintablesThe Corned One

Nikon XQD Memory Card Case

INTRO: The printed model shown in the photographs is Version 5. It works, but I didn't like the placement of the SD Cards on the side. It made it difficult to remove the XQD Cards when there were SD Cards in the container. Version 6 has…

Downloads
138
Likes
19
Rating
4.5
P
PrintablesBaconFase

tripodQD to picatinny

1913 picatinny rail for a Samsonite Model 8802 tripod with a quick detach feature. Maybe works with other QD tripods as well.

Downloads
136
Likes
19
Rating
0
P
PrintablesB4by_dR1v3R

YHM Turbo T2 Airsoft Replica (QD Version)

This is yet another pretty darn exact replica of Yanky Hill Machining's Turbo T2 suppressor along with the QD muzzle device . Both have all the details of original, except obviously, the logo/engraving on the suppressor. (But it has fake…

Downloads
131
Likes
23
Rating
0
P
PrintablesZAX

Lynx (and Minx/Lonx) 2.1 Ergo stock with QD slot. Designed for TPU

Updated 5/12/24 - Embiggened holes to clear stock attachment screws in the buttpads. I noticed the screws heads seemed larger in the most recent lynx kit I got. Also added 1.25 inch pad option. Updated 5/23/24 - Added an additional…

Downloads
125
Likes
30
Rating
5
P
Printablesk8md

QDX Enclosure by K8MD

The print does not require any supports. I printed with PLA for modelling, but will print with PETG for the final rev. PLA should be fine if the transceiver never leaves your shack. PETG is going to be required if you plan on leaving it…

Downloads
107
Likes
15
Rating
5
P
PrintablesSaniainen

Ase Utra style QD muzzle devises

Muzzle devise spotted on Sako's AR10 and AR15 rifles: -Birdcage flash hider for airsoft 14mm ccw threads -thread protector "crown" -QD silencer with two can lengths, overall length is 150 and 200mm, diameter is 43.5mm -Baffle key is…

Downloads
95
Likes
15
Rating
0
P
PrintablesAwnage

Gridfinity: Nikon EN-EL15 and XQD Card Holder

Gridfinity box for storing four XQD cards and two EN-EL15b batteries.

Downloads
86
Likes
9
Rating
0
P
PrintablesCVS1401

Lee App QD Case Feed Collator

Complete redesign including new cartridge inserts, a quick detach disc that can be partially rotated to keep cases from coming out when being removed. M4 and spring form an axle to keep the tube holder and disc together while allowing…

Downloads
86
Likes
10
Rating
0
P
PrintablesB4by_dR1v3R

Airsoft YHM Phantom QD Muzzle Device Replica

This is a replica of Yankee Hill Machine's Phantom QD muzzle device, extremely close to the original except from the outside thread, and this is just so that it's compatible with my Turbo T2 suppressor replica. (Here:…

Downloads
85
Likes
15
Rating
0
P
PrintablesSlothTitan

QDRP-MK1 (Quadrupe) War Robot

Here is the first mass produced version of QDRP-MK1, a.k.a. Quadrupe. These killing machines have been effectively used in First Civil War of Mars due to its adaptability to environment and core materials used in it such as a…

Downloads
84
Likes
22
Rating
0
P
PrintablesBalconyWatcher

Rifle Stock Adjustable Height Monopod - QD Mount for Magpul Style Buttstock

This monopod attaches to the bottom QD socket of a rifle buttstock. In conjunction with a bipod it allows an additional single-legged point of support towards the rear of the rifle to provide more stability for precision shots. It was…

Downloads
80
Likes
13
Rating
0

Dart Zone conquest pro QuickDraw stock (QDS)

Introducing the Dart Zone Conquest pro QDS! The QDS puts the conquest pro back in the game, uplifting it to new efficiencies: Solid stock design Collapsible (for you CQB enthusiasts) compared to Dart Zone Dictator Pro Acts as a “Flaired…

Downloads
75
Likes
32
Rating
5
P
PrintablesKytor

Nokia N-Gage QD Display Stand

The Nokia N-Gage is widely recognized as the world’s foremost combination cellular telephone and game console. This display stand will hold the second generation N-Gage QD. It will not accommodate the original model. Printing: Use Duramic…

Downloads
74
Likes
7
Rating
0
P

QRP Labs QDX Case

This is a case for the latest (as of 2024-07) version of QRP Labs' QDX transceiver. I printed it with the smallest sides on the print bed with no supports, and had no problems. If you don't choose where the seams go they can get pretty…

Downloads
67
Likes
5
Rating
0
P
PrintablesCody Lenz

NQD Jet Nozzle

The rear jet portion for the NQD jet boat. I lost the original one. Its not prefect but it does work

Downloads
62
Likes
7
Rating
0
P
Printablesxlr8rr

Hydraulic QD covers

This replaces the Hydraulic Remote covers on my Kioti Daedong tractor. Print in TPU

Downloads
62
Likes
3
Rating
0
P
PrintablesJoel

steering wheel QD wall mount, NRG, Works Bell

this model works on both NRG and Works Bell QDs, it's a tighter fit on the works bell, so may need some small filing. there are no clocking divots, so the part can be mounted and the wheel can be installed at any angle.

Downloads
60
Likes
5
Rating
0
P
PrintablesRPC Labs

QD Sling Storage Mount

Two variants that both do the same thing - give you a quick and neat way to hang/store slings with a QD mount. Accepts #6 or #8 tapered screws, e.g. drywall screws or “construction” screws. The solo variant has the screw go inside the…

Downloads
58
Likes
8
Rating
0
P
PrintablesDaniel Novet

HTA90/22 QD Sling Mount

Since HighTowerArmory had to ammend the design of the P90 to fit the 10/22, the slit on the stock is not identical to the original P90. Due to the cross-bolt safety, the harness-mount would not fit either, as it obstructs the safety. So I…

Downloads
57
Likes
4
Rating
0
P
PrintablesTacticalBeanie

QD 6mm Macro line clip

Clip for preventing QD 6mm macro line adaptors, such as lines used in Polarstar HPA airsoft engines from accidentally disconencting. Should work for any 6mm macro line QD similar to picutured above Recommended to print in PLA+ or PETG,…

Downloads
55
Likes
7
Rating
0
P
PrintablesMoritz Wander

Tobii Eyetracker 5 - TopMount for MSI Optix MAG274QRF-QD

This Mount is meant to be Printed 4 times and can be clipped to the top of a MSI Optix MAG274QRF-QD screen. The two cable files can be printed once each and are used to stop the cable from pulling the tracker out the Top.

Downloads
52
Likes
5
Rating
0
P
PrintablesOliver Mävers

Wigo Dachstangenabstützung Weinsberg CaraOne 480 QDK

Siehe Original - Bauteil dient als Adapterplatte für Wigo Dachmarkisen für den Fall das durch Gefälle die linke äußere Dachstange im Bereich der Seitenmarkierungsleuchte positioniert werden muss. Beim Druck hab ich mich an die…

Downloads
50
Likes
4
Rating
0
P
PrintablesG Rex

QD attachment fob

I made this because I wanted to have an easy way to attach a QD sling swivel to things. Using a piece of 550 paracord you can attach this fob to anything you want to allow you to use a QD attachment. I printed it with 100% infill, it…

Downloads
49
Likes
1
Rating
0
P
PrintablesWarialinth

MMU2 QD

Ever had that desire to take your MMU and just chuck it out the window after especially long ruined print? Or just looking for quick way to disconnect the your MMU when it's not needed and/or you need to print delicate filaments that…

Downloads
48
Likes
23
Rating
0
P
Printablesciwielab
18+

The source marked this model as adult content.

Downloads
47
Likes
0
Rating
0
P
Printablesgnatcage

Anti-rotation QD sling cup for Picatinny rails

Print it with the front or rear on the build plate and use supports for the QD cup itself. Bridging is enough for the M3 hardware. Perimeters: 4 Infill: 100% but 20% is probably fine.

Downloads
45
Likes
14
Rating
0
P
PrintablesMaverick0197

BH SERPA QD RoundPlate

---Title: RoundPlate for the BlackHawk SERPA QD holster System ---Citations: Designed to work with Blackhawk's system. ---Description: The male component of BlackHawk's SERPA QD system. ---Variants: RoundPlate: The male plate, as close to…

Downloads
42
Likes
3
Rating
0
P
PrintablesSQU1DGY

QD sling mount for LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)

The same design as the original except this time there is a QD mount on the right side of the blaster's stock. Works super well if you run the sling of the front of the top rail, over the left shoulder and then under the right arm and…

Downloads
41
Likes
17
Rating
0
P
PrintablesMikl_h

XCORTECH XT301 to G&P QD Airsoft Silencer

Simple spacer to insert XCORTECH XT301 tracer unit to G&P QD Silencer

Downloads
40
Likes
3
Rating
0
P
PrintablesSimon Gumbel

Gridfinity Holder for XQD Reader and Cards

A holder for 1 XQD card reader and 4 XQD cards

Downloads
37
Likes
4
Rating
0
P
Printablesdbmeed

Magpul QD Flush Insert

This is a flush insert adaptor for the Magpul Type 1 QD socket: https://magpul.com/sling-mount-kit-type-1.html?mp_global_color=118 This design should work for any hollow core stock, if you have access to the inside. For reference, I am…

Downloads
35
Likes
9
Rating
0
P
PrintablesMikl_h

G&P QD Airsoft silencer baffle

Simple yet effective baffles for airsoft version of QD silencer from G&P.

Downloads
35
Likes
2
Rating
5
P
PrintablesMatt

15-22 M4 stock QD sling attachment

Use this to mount a Magpul QD cup on an M&P 15-22 with an M4 stock--it also fits some (many?) other M4 stocks, and M4 stocks with a saddle cheek rest installed. I wouldn't go to war with this but it's perfectly adequate for range use.…

Downloads
33
Likes
9
Rating
0

Ontos - Improved Stock with QD Sling Point and Brass Inserts

A remixed stock for the Ontos. It uses two M3x4x5 brass inserts at the back for the screws to prevent stripping into plastic if you ever wish to change the buttplate (which I will do later on when I finally end up buying TPU). Also added…

Downloads
32
Likes
13
Rating
0
P
PrintablesGleave Makes

4QD Hand Controller Holder

Printable holder for the 4QD hand controller, giving you a neat way to store the controller when not in use. If you mount it in a good place, it will also enable you to control your locomotive without having to remove the controller from…

Downloads
32
Likes
2
Rating
0
P
PrintablesChop3D

VzBot330 QD1/2 Arm and Mount

Sliding Dock for the QD intergrated FanDuct from he lovley VzBot Project https://github.com/pbsuper/VzBoT-UserMods/tree/master/pbsuper/Quickdraw https://discord.com/channels/829828765512106054/1054891407267086416

Downloads
30
Likes
6
Rating
0
P
PrintablesRavnetua

Quick Disconnect to Quick Disconnect (QD to QD)

Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution: 0.2 Infill: 100% Filament brand: Whatever Filament material: PETG Notes: Print upright with at brim for poper adhesion

Downloads
30
Likes
4
Rating
0
P
PrintablesShnup

Tobii Eye Tracker 5 Center Mount for ASUS XG27AQDMG

Short Description A mounting bracket for the Tobii Eye Tracker 5 designed for the ASUS XG27AQDMG monitor (and similar models). It positions the eye tracker perfectly centered on the monitor for a clean and flush fit. Features Designed for…

Downloads
29
Likes
0
Rating
0

QD Sling Point Mount Development Kit

This QD Sling Point Mount Development Kit is a CAD-ready model of a Push-Button "Quick-Detach" spec socket that can be quickly adapted and customized to mount compatible swivel mounts to virtually anything. Originally designed for a nerf…

Downloads
29
Likes
3
Rating
0
P
PrintablesJeroe

Gridfinity CF-Express and XQD card holder

Gridfinity CF-Express card holder 1x1 for five cards

Downloads
29
Likes
2
Rating
0
P
PrintablesGikote

Buffer Tube Adjustable Stock with optional QD

New Version posted November 4, 2026! The stock now supports QD! Description : Based on a 30mm buffer tube. This part is only meant for toys like airsoft and nerf blasters. For the QD version, I have attachments for metal sockets and a…

Downloads
29
Likes
32
Rating
0
P
Printablesccc6501

1.5" NPT to QD for in ground Heyward Pool Return

This will convert a standard Heyward 1.5" NPT in ground pool return fitting to a quick disconnect style. I have adapted the QD to accept a flow multiplying jet, cap, hose adapter. Also included is wrench for install/removal. This is still…

Downloads
29
Likes
1
Rating
0
P
PrintablesOvalworks

Kobalt dust shoe with QD and magnet(LR 4)

Added QD top section to dust shoe to allow for quick removal/placement of a 2.5" vac hose. Used in combo with: https://www.printables.com/model/925991-25-hose-end-to-attach-to-lowrider-3-floating-z-dus and the universal c clip from:…

Downloads
28
Likes
8
Rating
5
P
PrintablesIroesStrongarm

Meshlicious Koolance QD3 Passthrough

This is a work in progress. Currently the bottom middle screw hole is slightly too low to lineup correctly. Also, the bottom holes are a touch too small for the heat set inserts. This is my first design. Uploading it as a request. I…

Downloads
28
Likes
1
Rating
0
P
PrintablesA random F

Airsoft P90 QD mount

This is a QD mount for a sling on an airsoft p90. Materials used: 2x 40mm m3 screws 2x m3 heat set threaded inserts Metal QD mount (example image provided Recommended settings: 0.2mm layer size 55% cubic infill wall ordering, outside to…

Downloads
27
Likes
6
Rating
0
P
Printablesccc6501

In Ground Pool QD

QD adapter for in-ground 1 1/2" pool return fittings. Still in work!

Downloads
27
Likes
5
Rating
0
P
Printablesmmarv74

Drawbridge Type Backplane board for R2 with QD mounting

Completely remodeled to reorganized a bit and added mounting tabs for quick disconnect pins (spring pins).

Downloads
27
Likes
4
Rating
0
P
PrintablesraNn

Mosquito MK1 QD Mount

Its simple QD mount for Mosquito mounted on folding stock adapter (but probably will work fine on battery stock adapter). There's 2 versions of this attachment, first which is "bulkier" and second, which is slimmer, but I didn't test it…

Downloads
26
Likes
4
Rating
0
P
PrintablesSalticus

Updated QD sling points for Sillybutts Breacher

Print with the same profile sillybutts provides. Both parts shown in the photos were printed without supports on a Bambu Lab A1 and work just fine.

Downloads
24
Likes
8
Rating
0
P
PrintablesShady Public

QD Sling Mount for Honeycomb Storage Wall

Allows you to mount a single QD sling to you HSW to better organize you gear. If it's to tight sand it a little but I didn't need to except one brand of QD mount.

Downloads
23
Likes
5
Rating
0
P
Printablesmikeller

Dust Caps for High Pressure Quick Disconnect (QD) Adaptors

Dust caps for Quick Disconnect (QD) high pressure gas fittings (often used for airsoft, or for gas boosters for diving gases). Use a cable tie to fasten the 'tail' of the cover to the gas line so you won't loose it when off. Category:…

Downloads
23
Likes
2
Rating
0
P

Royal QDL/Futura Typewriter Feet

Replacement feet for the 1956-1959 Royal Quiet Deluxe (QDL) and the 1958-1962 Royal Futura. Modeled and tested on my 1959, 1960, and 1962 Royal Futura 800's. The last generation of the QDL used the exact same feet, so are 100% compatible.…

Downloads
22
Likes
3
Rating
5
P
PrintablesWillem_Lab

GridNikFinity - 2x Nikon EN-EL15 with 4x XQD Card Slots in 2x1 Gridfinity Box

📦 Gridfinity Nikon D800 Battery & XQD Card Organizer (2×1×6) This Gridfinity box was designed specifically for my studio workflow with a Nikon D800 . After setting up Gridfinity bases in my drawers, I tested a few existing battery and…

Downloads
22
Likes
3
Rating
0
P
PrintablesCashy

Xshot Motorised Piston Pump Buffertube QD Sling Mount

QD Sling was used for a day crawling though tall grass, dropped onto sling multiple times for sidearm use. Normal sling will fit too. This model is ambi for those left handers out there! Test fit and drop before use! Printed in petg 50%…

Downloads
21
Likes
5
Rating
0

ZWQ S400 - Rear QD point

A rear angled free swivel QD point for the ZWQ S400 Makes use of the upper chicago screw that holds the magwell in place. Fits the threaded screw, not the internally threaded post. Ideally replace the screw with one of the slightly longer…

Downloads
21
Likes
4
Rating
0
P
PrintablesDotNetWorker

BQD R/C camera mount replacement hot shoe plate SYMA X8

In a heavy crash landing the bottom plate of my BQD R/C camera mount shattered. I drew up another that fits my SYMA X8 nice and snug. Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal Rafts: Doesn't Matter Supports:…

Downloads
19
Likes
0
Rating
0
P
PrintablesUPWDesign

Thin Buttplate for QD Stock

I like the QD and ergo but didn't need the extra length. Made a thin plate that should screw right into the QD stock, might need shorter screws

Downloads
19
Likes
6
Rating
5

MPP Stockish Stock QD Point

Adds a QD point to N8thin's MPP stock

Downloads
18
Likes
6
Rating
0
P

Ebike Front Lamp GoPro Mount - Star Union QD213-2 / E-Biker RAPID LIGHT 48V

Standard factory mount for this lamp is so bad - so i made that GoPro type mount PETG - recommended (due to outdoor environment) My design GoPro Mount Used: https://www.thingiverse.com/thing:3515125 GoPro Base designed bymark133:…

Downloads
18
Likes
3
Rating
0
P

Royal QDL Typewriter Feet

Measurements taken from the existing feet off my 1951 Royal QDL. I used the bolts from the existing feet to ensure that the typewriter would be able to latch into its case. These feet fit the rectangle-based feet with metal caps. I would…

Downloads
17
Likes
1
Rating
0
P
PrintablesKirk

QDIY 140mm Single Fan Plexi replacement piece

This is a replacement piece for the QDIY open test bench case ( https://www.amazon.com/dp/B08Q854RFR?psc=1&ref=ppx_yo2ov_dt_b_product_details ). It is to replace the clear plexiglass pieces that come with the frame. The piece that comes…

Downloads
17
Likes
0
Rating
0
P
PrintablesSumofThis

Mount for 2013 BMW X5 and X6 Carpuride Head Unit C94 AISN B0DHGPQDK7

This is a dash mount for the $79 Carpuride C94 ( https://amzn.to/48iGrer ) 10.26 ASIN B0DHGPQDK7 for a 2013 BMW X6 (should fit the X5) that I made for a friend. It sits in the factory cubby and holds the Carpuride head unit in front of…

Downloads
16
Likes
2
Rating
0
P
PrintablesSalticus

Vulture/Shrub fancy stock buttplate with QD

This is just a replacement buttplate for the vulture/smiley fancy stock with a QD attach point at the bottom. There are anti-rotation posts inside the cup to help prevent twisting. Use the same print settings as the rest of the stock and…

Downloads
15
Likes
11
Rating
0
P
PrintablesV4L0R

QD Open Shinkansen Smiley Stock

A remix of the Shinkansen Smiley Stock that removes the big and small insert replacing both with a bigger opening. Optional QD attachment point INCOMPATIBLE WITH FPS ADJUSTMENT KNOB 2 versions, with or without the QD point

Downloads
15
Likes
6
Rating
5
P
Printablesgot_mule

Meshlicious QDC backplate with labeled in/out (plus panel passthrough for aviator connector)

Edit: 2022-03-28: Created a v2 that's a bit thicker and has an additional passthrough for a GX16 connector. It turns out this last connector is actually in the way of the PCIe horizontal bar, and should be raised about 10-15mm or so…

Downloads
15
Likes
3
Rating
0
P
PrintablesHarabi

Airsoft SSR90 (P90) Novritsch QD point holder

My brother also have a P90 and really liked the Novritsch solution, we ordered a set from the SSR90 QD point, but it's counter part not included in the package: SSR90 QD Points – Novritsch | Airsoft Print it from heat resistant and…

Downloads
15
Likes
3
Rating
0
P
PrintablesDamageReport

ZAX Lynx 2.1 TPU Ergo Stock Metal QD Insert Hardware Version

This is a combination of the ZAX TPU buttplate QD Ergo Stock Lynx 2.1 remix and the Kelly Industries QD Ergo Stock Lynx 2.02 Remix. I like the metal insert found in the Kelly Industries The nut side of the QD insert is unchanged from the…

Downloads
14
Likes
8
Rating
0
P
PrintablesRedSaber

QD Battle Belt Hanger

Another belt hanger for my other battle belt, can be printed in PLA as the part is static. May also fit other belts with similar QD buckles.

Downloads
14
Likes
2
Rating
0
P
PrintablesB3OWULF

QD sling mount mod for Sillybutts Breacher and German Shepard barrel

This mod addresses the tolerance issues of the original Breacher QD sockets being too small, while adding stops to limit the rotation of the sling loops (which lock securely into position every 45 degrees). This includes the files for…

Downloads
14
Likes
24
Rating
0
P
PrintablesAtlet

Star Union QD197 Mount for VLCD5

Bike front light mount adapter for VLCD5 display.

Downloads
14
Likes
0
Rating
0
P
Printablesmscalora

Camera Guard for QD Blink Mini Camera Mount

Prevent accidental camera aiming changes while working around printer for use with my QD arm for the Blink Mini camera mount. Attaches to QD mount with 2-4 M3x6 (or longer) print in any rigid material upside down with no support.

Downloads
14
Likes
2
Rating
0
P
PrintablesSalticus

Excalibur stock with QD sling point

Sillybutts has done a great job with Excalibur. However, there aren't great ways to attach a sling. You can use a picatinny attachment near the front to for a sling point, but there aren't any good options for the back of the blaster.…

Downloads
13
Likes
3
Rating
0
P
PrintablesOvalworks

Kinematic QD Base and Tool Holder

PLA. Printed as oriented. 30% infill. No Supports needed. Used a remix of Doug's original Kinematic design and added a finger pad to the base and a tab for pulling to the tool mounting piece. Useful in overcoming the magnet and separating…

Downloads
13
Likes
1
Rating
0
P
Printablesbarrooze

Pinlock Keg QD Barb Adapter

This is an adapter for a pinlock quick disconnect (QD) for a 5 gallon pinlock keg to a 1/2" barb fitting. This adapter will allow you to connect a pinlock QD to a submersible pump to aid in beer line cleaning. Due to the twisting nature…

Downloads
11
Likes
2
Rating
0
P
PrintablesPewperSkewper

N-Gage QD PS5 Grip

A grip for the Nokia N-Gage QD (QD), based on the DualSense PS5 controller, which I find very comfortable to hold. It provides access to the power button, the cart slot and leaves an opening for the speaker. The QD is held in place by…

Downloads
10
Likes
4
Rating
0
P
Printablesgnatcage

QD sling buttstock for OFD Hana

Created for an OFD Hana build from Silver Fox Industries. The stock is upgraded to have anti-rotation QD cups, a tighter fit with the supplied aluminum stock bars, and a taller footprint for those who find the original stock toe digging…

Downloads
10
Likes
13
Rating
0
P
PrintablesDaniil Zhiltsov

Xiaomi Roidmi brush clip, brush model XCQDS03RM

A replacement for the clip that allows brush cleaning and exchange on xiaomi/roidmi brush, model XCQDS03RM

Downloads
10
Likes
0
Rating
0
P
Printablesawcjack

XQD Cards / CFexpress Type B Cards and SD Cards Box

Minimum printing the box, 2 latches and 2 pins. PETG is Recommended.

Downloads
10
Likes
3
Rating
0
P
PrintablesEreeB

Universal Thin Quick Disconnect (UTQD)

This universal connector allows the use to connect any compatible accessory to a mounting point with a thickness of at least 2mm (aka the maximum thickness of iPhone cases for Magsafe compatibility). There are two options available for…

Downloads
9
Likes
1
Rating
0
P
PrintablesSpyder

PKI QD Ergo stock

UPDATE-10/1/25: Fixed some artifacts and added all the wheel parts to step also QD version

Downloads
9
Likes
7
Rating
0
P
PrintablesCailess Arouræ

X-Shot Longshot Internal QD Sling Mount

Using the Hyperion 2A aluminum heat-set insert QD sling mount, and several sizes of metric drill bits, you can add an extremely strong sling mount to your longshot, capable of withstanding the harshest play. You will need: Hyperion 2A QD…

Downloads
9
Likes
6
Rating
0
P
Printables너 귀엽다

Koolance QD3 Bulkhead m18x1 Passthrough Dual Slot

A threaded passthrough for Koolance QD3 barbed fittings. Change the thread size if you want to use it for panel QD3s.

Downloads
9
Likes
0
Rating
0
P
PrintablesRoman Hujer

Mini EQdirect USB cable for ASIAIR

Mini EQ direct USB cable for ASIAIR or Stellarmate BOM RS232 DB9 Male to RJ45 Female M/F Modular Adapter Connector Convertor Extender USB 2.0 to TTL UART Module PL2303 YP-01 2x 2x6mm self-tapping screws RJ45 Connector Phone Cable Line…

Downloads
9
Likes
1
Rating
0
P
PrintablesItsOwl

DNT Hydra w/ ADM 170-S QD 1.54/1.6/1.7 Spacer

Shim to raise the Hydra thermal to 1.54 for use at common LPVO height. V1 - only two holes for bolts and overhangs both sides v2 - Has 3 bolt holes (2 M5x20 & 1 M5x12) and does not overhang on one side There are two v2 files, one provides…

Downloads
9
Likes
3
Rating
0
P
PrintablesPaul Feher

Bloomberg KQD1780 refrigerator

Plastic part that turns part of the door.

Downloads
9
Likes
0
Rating
0
P
PrintablesDamageReport

Toolless Tensioning Lynx 2.1 TPU Ergo Stock With Hardware Insert QD Point

A further refinement/version of the previous QD Ergo Stock + ZAX TPU buttplate Lynx 2.1 remix I made, now with a toolless tensioning wheel. Copies the idea from several existing Lynx buttplate remixes, but isn't actually based on any of…

Downloads
8
Likes
4
Rating
0
P
Printablesarm00700th

printable QD mount mlok

recommand PLA+ or better

Downloads
8
Likes
4
Rating
0
P
Printablesgarfield7257

M16A1 Buttstock QD swivel mount

Great if you have an original retro A1 buttstock that's missing the sling mount. Takes a standard QD and has a hole for a roll pin that lines up with the holes in the stock. It could just be epoxied in too. The roll pin method allows you…

Downloads
7
Likes
3
Rating
0
P
PrintablesGewher 43

QD flip-up sights

These are QD backup sights that designed to only use a size 8 or white lego rubber band. They are not very accurate though because you cannot adjust them(something I hope to fix in the future) neither are they very low profile when folded…

Downloads
7
Likes
2
Rating
0
P
Printablesnyxie

QD sling point for worker harrier stock

Hardware M4 socket head cap screw

Downloads
7
Likes
0
Rating
0
P
PrintablesTFireFox

Ontos QD Mount Buttstock

I love QD mounts and feels more secure especially when it's part of the printed part instead of an add on. Loved the qd mount on GrandPereDansLeSirop Ontos improved stock, but I am more accustomed to having it on the sides. So I meshed 2…

Downloads
7
Likes
2
Rating
0